linux-stable/drivers/staging/wilc1000/wilc_wlan.h
Ajay Singh a76e712a5a staging: wilc1000: remove unused interrupt status handling code
Remove interrupt handling for unused interrupt status(PLL update and
Sleep). The firmware only initiates the interrupt for the data transfer
to host and rest are not used anymore.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20190910074514.3073-1-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-12 10:37:26 +01:00

304 lines
9.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
* All rights reserved.
*/
#ifndef WILC_WLAN_H
#define WILC_WLAN_H
#include <linux/types.h>
/********************************************
*
* Mac eth header length
*
********************************************/
#define MAX_MAC_HDR_LEN 26 /* QOS_MAC_HDR_LEN */
#define SUB_MSDU_HEADER_LENGTH 14
#define SNAP_HDR_LEN 8
#define ETHERNET_HDR_LEN 14
#define WORD_ALIGNMENT_PAD 0
#define ETH_ETHERNET_HDR_OFFSET (MAX_MAC_HDR_LEN + \
SUB_MSDU_HEADER_LENGTH + \
SNAP_HDR_LEN - \
ETHERNET_HDR_LEN + \
WORD_ALIGNMENT_PAD)
#define HOST_HDR_OFFSET 4
#define ETHERNET_HDR_LEN 14
#define IP_HDR_LEN 20
#define IP_HDR_OFFSET ETHERNET_HDR_LEN
#define UDP_HDR_OFFSET (IP_HDR_LEN + IP_HDR_OFFSET)
#define UDP_HDR_LEN 8
#define UDP_DATA_OFFSET (UDP_HDR_OFFSET + UDP_HDR_LEN)
#define ETH_CONFIG_PKT_HDR_LEN UDP_DATA_OFFSET
#define ETH_CONFIG_PKT_HDR_OFFSET (ETH_ETHERNET_HDR_OFFSET + \
ETH_CONFIG_PKT_HDR_LEN)
/********************************************
*
* Register Defines
*
********************************************/
#define WILC_PERIPH_REG_BASE 0x1000
#define WILC_CHANGING_VIR_IF 0x108c
#define WILC_CHIPID WILC_PERIPH_REG_BASE
#define WILC_GLB_RESET_0 (WILC_PERIPH_REG_BASE + 0x400)
#define WILC_PIN_MUX_0 (WILC_PERIPH_REG_BASE + 0x408)
#define WILC_HOST_TX_CTRL (WILC_PERIPH_REG_BASE + 0x6c)
#define WILC_HOST_RX_CTRL_0 (WILC_PERIPH_REG_BASE + 0x70)
#define WILC_HOST_RX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x74)
#define WILC_HOST_VMM_CTL (WILC_PERIPH_REG_BASE + 0x78)
#define WILC_HOST_RX_CTRL (WILC_PERIPH_REG_BASE + 0x80)
#define WILC_HOST_RX_EXTRA_SIZE (WILC_PERIPH_REG_BASE + 0x84)
#define WILC_HOST_TX_CTRL_1 (WILC_PERIPH_REG_BASE + 0x88)
#define WILC_MISC (WILC_PERIPH_REG_BASE + 0x428)
#define WILC_INTR_REG_BASE (WILC_PERIPH_REG_BASE + 0xa00)
#define WILC_INTR_ENABLE WILC_INTR_REG_BASE
#define WILC_INTR2_ENABLE (WILC_INTR_REG_BASE + 4)
#define WILC_INTR_POLARITY (WILC_INTR_REG_BASE + 0x10)
#define WILC_INTR_TYPE (WILC_INTR_REG_BASE + 0x20)
#define WILC_INTR_CLEAR (WILC_INTR_REG_BASE + 0x30)
#define WILC_INTR_STATUS (WILC_INTR_REG_BASE + 0x40)
#define WILC_VMM_TBL_SIZE 64
#define WILC_VMM_TX_TBL_BASE 0x150400
#define WILC_VMM_RX_TBL_BASE 0x150500
#define WILC_VMM_BASE 0x150000
#define WILC_VMM_CORE_CTL WILC_VMM_BASE
#define WILC_VMM_TBL_CTL (WILC_VMM_BASE + 0x4)
#define WILC_VMM_TBL_ENTRY (WILC_VMM_BASE + 0x8)
#define WILC_VMM_TBL0_SIZE (WILC_VMM_BASE + 0xc)
#define WILC_VMM_TO_HOST_SIZE (WILC_VMM_BASE + 0x10)
#define WILC_VMM_CORE_CFG (WILC_VMM_BASE + 0x14)
#define WILC_VMM_TBL_ACTIVE (WILC_VMM_BASE + 040)
#define WILC_VMM_TBL_STATUS (WILC_VMM_BASE + 0x44)
#define WILC_SPI_REG_BASE 0xe800
#define WILC_SPI_CTL WILC_SPI_REG_BASE
#define WILC_SPI_MASTER_DMA_ADDR (WILC_SPI_REG_BASE + 0x4)
#define WILC_SPI_MASTER_DMA_COUNT (WILC_SPI_REG_BASE + 0x8)
#define WILC_SPI_SLAVE_DMA_ADDR (WILC_SPI_REG_BASE + 0xc)
#define WILC_SPI_SLAVE_DMA_COUNT (WILC_SPI_REG_BASE + 0x10)
#define WILC_SPI_TX_MODE (WILC_SPI_REG_BASE + 0x20)
#define WILC_SPI_PROTOCOL_CONFIG (WILC_SPI_REG_BASE + 0x24)
#define WILC_SPI_INTR_CTL (WILC_SPI_REG_BASE + 0x2c)
#define WILC_SPI_PROTOCOL_OFFSET (WILC_SPI_PROTOCOL_CONFIG - \
WILC_SPI_REG_BASE)
#define WILC_AHB_DATA_MEM_BASE 0x30000
#define WILC_AHB_SHARE_MEM_BASE 0xd0000
#define WILC_VMM_TBL_RX_SHADOW_BASE WILC_AHB_SHARE_MEM_BASE
#define WILC_VMM_TBL_RX_SHADOW_SIZE 256
#define WILC_FW_HOST_COMM 0x13c0
#define WILC_GP_REG_0 0x149c
#define WILC_GP_REG_1 0x14a0
#define WILC_HAVE_SDIO_IRQ_GPIO BIT(0)
#define WILC_HAVE_USE_PMU BIT(1)
#define WILC_HAVE_SLEEP_CLK_SRC_RTC BIT(2)
#define WILC_HAVE_SLEEP_CLK_SRC_XO BIT(3)
#define WILC_HAVE_EXT_PA_INV_TX_RX BIT(4)
#define WILC_HAVE_LEGACY_RF_SETTINGS BIT(5)
#define WILC_HAVE_XTAL_24 BIT(6)
#define WILC_HAVE_DISABLE_WILC_UART BIT(7)
#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE BIT(8)
/********************************************
*
* Wlan Defines
*
********************************************/
#define WILC_CFG_PKT 1
#define WILC_NET_PKT 0
#define WILC_MGMT_PKT 2
#define WILC_CFG_SET 1
#define WILC_CFG_QUERY 0
#define WILC_CFG_RSP 1
#define WILC_CFG_RSP_STATUS 2
#define WILC_CFG_RSP_SCAN 3
#define WILC_ABORT_REQ_BIT BIT(31)
#define WILC_RX_BUFF_SIZE (96 * 1024)
#define WILC_TX_BUFF_SIZE (64 * 1024)
#define MODALIAS "WILC_SPI"
#define GPIO_NUM 0x44
/*******************************************/
/* E0 and later Interrupt flags. */
/*******************************************/
/*******************************************/
/* E0 and later Interrupt flags. */
/* IRQ Status word */
/* 15:0 = DMA count in words. */
/* 16: INT0 flag */
/* 17: INT1 flag */
/* 18: INT2 flag */
/* 19: INT3 flag */
/* 20: INT4 flag */
/* 21: INT5 flag */
/*******************************************/
#define IRG_FLAGS_OFFSET 16
#define IRQ_DMA_WD_CNT_MASK ((1ul << IRG_FLAGS_OFFSET) - 1)
#define INT_0 BIT(IRG_FLAGS_OFFSET)
#define INT_1 BIT(IRG_FLAGS_OFFSET + 1)
#define INT_2 BIT(IRG_FLAGS_OFFSET + 2)
#define INT_3 BIT(IRG_FLAGS_OFFSET + 3)
#define INT_4 BIT(IRG_FLAGS_OFFSET + 4)
#define INT_5 BIT(IRG_FLAGS_OFFSET + 5)
#define MAX_NUM_INT 6
/*******************************************/
/* E0 and later Interrupt flags. */
/* IRQ Clear word */
/* 0: Clear INT0 */
/* 1: Clear INT1 */
/* 2: Clear INT2 */
/* 3: Clear INT3 */
/* 4: Clear INT4 */
/* 5: Clear INT5 */
/* 6: Select VMM table 1 */
/* 7: Select VMM table 2 */
/* 8: Enable VMM */
/*******************************************/
#define CLR_INT0 BIT(0)
#define CLR_INT1 BIT(1)
#define CLR_INT2 BIT(2)
#define CLR_INT3 BIT(3)
#define CLR_INT4 BIT(4)
#define CLR_INT5 BIT(5)
#define SEL_VMM_TBL0 BIT(6)
#define SEL_VMM_TBL1 BIT(7)
#define EN_VMM BIT(8)
#define DATA_INT_EXT INT_0
#define ALL_INT_EXT DATA_INT_EXT
#define NUM_INT_EXT 1
#define DATA_INT_CLR CLR_INT0
#define ENABLE_RX_VMM (SEL_VMM_TBL1 | EN_VMM)
#define ENABLE_TX_VMM (SEL_VMM_TBL0 | EN_VMM)
/*time for expiring the completion of cfg packets*/
#define WILC_CFG_PKTS_TIMEOUT msecs_to_jiffies(2000)
#define IS_MANAGMEMENT 0x100
#define IS_MANAGMEMENT_CALLBACK 0x080
#define IS_MGMT_STATUS_SUCCES 0x040
/********************************************
*
* Tx/Rx Queue Structure
*
********************************************/
struct txq_entry_t {
struct list_head list;
int type;
int ack_idx;
u8 *buffer;
int buffer_size;
void *priv;
int status;
struct wilc_vif *vif;
void (*tx_complete_func)(void *priv, int status);
};
struct rxq_entry_t {
struct list_head list;
u8 *buffer;
int buffer_size;
};
/********************************************
*
* Host IF Structure
*
********************************************/
struct wilc;
struct wilc_hif_func {
int (*hif_init)(struct wilc *wilc, bool resume);
int (*hif_deinit)(struct wilc *wilc);
int (*hif_read_reg)(struct wilc *wilc, u32 addr, u32 *data);
int (*hif_write_reg)(struct wilc *wilc, u32 addr, u32 data);
int (*hif_block_rx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
int (*hif_block_tx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
int (*hif_read_int)(struct wilc *wilc, u32 *int_status);
int (*hif_clear_int_ext)(struct wilc *wilc, u32 val);
int (*hif_read_size)(struct wilc *wilc, u32 *size);
int (*hif_block_tx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
int (*hif_block_rx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
int (*hif_sync_ext)(struct wilc *wilc, int nint);
int (*enable_interrupt)(struct wilc *nic);
void (*disable_interrupt)(struct wilc *nic);
};
#define WILC_MAX_CFG_FRAME_SIZE 1468
struct tx_complete_data {
int size;
void *buff;
struct sk_buff *skb;
};
struct wilc_cfg_cmd_hdr {
u8 cmd_type;
u8 seq_no;
__le16 total_len;
__le32 driver_handler;
};
struct wilc_cfg_frame {
struct wilc_cfg_cmd_hdr hdr;
u8 frame[WILC_MAX_CFG_FRAME_SIZE];
};
struct wilc_cfg_rsp {
u8 type;
u8 seq_no;
};
struct wilc;
struct wilc_vif;
int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
u32 buffer_size);
int wilc_wlan_start(struct wilc *wilc);
int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif);
int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
u32 buffer_size,
void (*tx_complete_fn)(void *, int));
int wilc_wlan_handle_txq(struct wilc *wl, u32 *txq_count);
void wilc_handle_isr(struct wilc *wilc);
void wilc_wlan_cleanup(struct net_device *dev);
int wilc_wlan_cfg_set(struct wilc_vif *vif, int start, u16 wid, u8 *buffer,
u32 buffer_size, int commit, u32 drv_handler);
int wilc_wlan_cfg_get(struct wilc_vif *vif, int start, u16 wid, int commit,
u32 drv_handler);
int wilc_wlan_txq_add_mgmt_pkt(struct net_device *dev, void *priv, u8 *buffer,
u32 buffer_size, void (*func)(void *, int));
void wilc_enable_tcp_ack_filter(struct wilc_vif *vif, bool value);
int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc);
netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev);
void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
void host_wakeup_notify(struct wilc *wilc);
void host_sleep_notify(struct wilc *wilc);
void chip_allow_sleep(struct wilc *wilc);
void chip_wakeup(struct wilc *wilc);
int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
u32 count);
int wilc_wlan_init(struct net_device *dev);
u32 wilc_get_chipid(struct wilc *wilc, bool update);
#endif