mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-21 10:01:00 +00:00
2a22b7ae2f
Wangxun NICs support the connection with SFP to RJ45 module. In this case, PCS need to be configured in SGMII mode. According to chapter 6.11.1 "SGMII Auto-Negitiation" of DesignWare Cores Ethernet PCS (version 3.20a) and custom design manual, do the following configuration when the interface mode is SGMII. 1. program VR_MII_AN_CTRL bit(3) [TX_CONFIG] = 1b (PHY side SGMII) 2. program VR_MII_AN_CTRL bit(8) [MII_CTRL] = 1b (8-bit MII) 3. program VR_MII_DIG_CTRL1 bit(0) [PHY_MODE_CTRL] = 1b Also CL37 AN in backplane configurations need to be enabled because of the special hardware design. Another thing to note is that PMA needs to be reconfigured before each CL37 AN configuration for SGMII, otherwise AN will fail, although we don't know why. On this device, CL37_ANSGM_STS (bit[4:1] of VR_MII_AN_INTR_STS) indicates the status received from remote link during the auto-negotiation, and self-clear after the auto-negotiation is complete. Meanwhile, CL37_ANCMPLT_INTR will be set to 1, to indicate CL37 AN is complete. So add another way to get the state for CL37 SGMII. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
128 lines
4.3 KiB
C
128 lines
4.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2020 Synopsys, Inc. and/or its affiliates.
|
|
* Synopsys DesignWare XPCS helpers
|
|
*
|
|
* Author: Jose Abreu <Jose.Abreu@synopsys.com>
|
|
*/
|
|
|
|
#define SYNOPSYS_XPCS_ID 0x7996ced0
|
|
#define SYNOPSYS_XPCS_MASK 0xffffffff
|
|
|
|
/* Vendor regs access */
|
|
#define DW_VENDOR BIT(15)
|
|
|
|
/* VR_XS_PCS */
|
|
#define DW_USXGMII_RST BIT(10)
|
|
#define DW_USXGMII_EN BIT(9)
|
|
#define DW_VR_XS_PCS_DIG_CTRL1 0x0000
|
|
#define DW_VR_RST BIT(15)
|
|
#define DW_EN_VSMMD1 BIT(13)
|
|
#define DW_CL37_BP BIT(12)
|
|
#define DW_VR_XS_PCS_DIG_STS 0x0010
|
|
#define DW_RXFIFO_ERR GENMASK(6, 5)
|
|
#define DW_PSEQ_ST GENMASK(4, 2)
|
|
#define DW_PSEQ_ST_GOOD FIELD_PREP(GENMASK(4, 2), 0x4)
|
|
|
|
/* SR_MII */
|
|
#define DW_USXGMII_FULL BIT(8)
|
|
#define DW_USXGMII_SS_MASK (BIT(13) | BIT(6) | BIT(5))
|
|
#define DW_USXGMII_10000 (BIT(13) | BIT(6))
|
|
#define DW_USXGMII_5000 (BIT(13) | BIT(5))
|
|
#define DW_USXGMII_2500 (BIT(5))
|
|
#define DW_USXGMII_1000 (BIT(6))
|
|
#define DW_USXGMII_100 (BIT(13))
|
|
#define DW_USXGMII_10 (0)
|
|
|
|
/* SR_AN */
|
|
#define DW_SR_AN_ADV1 0x10
|
|
#define DW_SR_AN_ADV2 0x11
|
|
#define DW_SR_AN_ADV3 0x12
|
|
|
|
/* Clause 73 Defines */
|
|
/* AN_LP_ABL1 */
|
|
#define DW_C73_PAUSE BIT(10)
|
|
#define DW_C73_ASYM_PAUSE BIT(11)
|
|
#define DW_C73_AN_ADV_SF 0x1
|
|
/* AN_LP_ABL2 */
|
|
#define DW_C73_1000KX BIT(5)
|
|
#define DW_C73_10000KX4 BIT(6)
|
|
#define DW_C73_10000KR BIT(7)
|
|
/* AN_LP_ABL3 */
|
|
#define DW_C73_2500KX BIT(0)
|
|
#define DW_C73_5000KR BIT(1)
|
|
|
|
/* Clause 37 Defines */
|
|
/* VR MII MMD registers offsets */
|
|
#define DW_VR_MII_MMD_CTRL 0x0000
|
|
#define DW_VR_MII_DIG_CTRL1 0x8000
|
|
#define DW_VR_MII_AN_CTRL 0x8001
|
|
#define DW_VR_MII_AN_INTR_STS 0x8002
|
|
/* Enable 2.5G Mode */
|
|
#define DW_VR_MII_DIG_CTRL1_2G5_EN BIT(2)
|
|
/* EEE Mode Control Register */
|
|
#define DW_VR_MII_EEE_MCTRL0 0x8006
|
|
#define DW_VR_MII_EEE_MCTRL1 0x800b
|
|
#define DW_VR_MII_DIG_CTRL2 0x80e1
|
|
|
|
/* VR_MII_DIG_CTRL1 */
|
|
#define DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW BIT(9)
|
|
#define DW_VR_MII_DIG_CTRL1_PHY_MODE_CTRL BIT(0)
|
|
|
|
/* VR_MII_DIG_CTRL2 */
|
|
#define DW_VR_MII_DIG_CTRL2_TX_POL_INV BIT(4)
|
|
#define DW_VR_MII_DIG_CTRL2_RX_POL_INV BIT(0)
|
|
|
|
/* VR_MII_AN_CTRL */
|
|
#define DW_VR_MII_AN_CTRL_8BIT BIT(8)
|
|
#define DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT 3
|
|
#define DW_VR_MII_TX_CONFIG_MASK BIT(3)
|
|
#define DW_VR_MII_TX_CONFIG_PHY_SIDE_SGMII 0x1
|
|
#define DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII 0x0
|
|
#define DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT 1
|
|
#define DW_VR_MII_PCS_MODE_MASK GENMASK(2, 1)
|
|
#define DW_VR_MII_PCS_MODE_C37_1000BASEX 0x0
|
|
#define DW_VR_MII_PCS_MODE_C37_SGMII 0x2
|
|
#define DW_VR_MII_AN_INTR_EN BIT(0)
|
|
|
|
/* VR_MII_AN_INTR_STS */
|
|
#define DW_VR_MII_AN_STS_C37_ANCMPLT_INTR BIT(0)
|
|
#define DW_VR_MII_AN_STS_C37_ANSGM_FD BIT(1)
|
|
#define DW_VR_MII_AN_STS_C37_ANSGM_SP_SHIFT 2
|
|
#define DW_VR_MII_AN_STS_C37_ANSGM_SP GENMASK(3, 2)
|
|
#define DW_VR_MII_C37_ANSGM_SP_10 0x0
|
|
#define DW_VR_MII_C37_ANSGM_SP_100 0x1
|
|
#define DW_VR_MII_C37_ANSGM_SP_1000 0x2
|
|
#define DW_VR_MII_C37_ANSGM_SP_LNKSTS BIT(4)
|
|
|
|
/* SR MII MMD Control defines */
|
|
#define AN_CL37_EN BIT(12) /* Enable Clause 37 auto-nego */
|
|
#define SGMII_SPEED_SS13 BIT(13) /* SGMII speed along with SS6 */
|
|
#define SGMII_SPEED_SS6 BIT(6) /* SGMII speed along with SS13 */
|
|
|
|
/* SR MII MMD AN Advertisement defines */
|
|
#define DW_HALF_DUPLEX BIT(6)
|
|
#define DW_FULL_DUPLEX BIT(5)
|
|
|
|
/* VR MII EEE Control 0 defines */
|
|
#define DW_VR_MII_EEE_LTX_EN BIT(0) /* LPI Tx Enable */
|
|
#define DW_VR_MII_EEE_LRX_EN BIT(1) /* LPI Rx Enable */
|
|
#define DW_VR_MII_EEE_TX_QUIET_EN BIT(2) /* Tx Quiet Enable */
|
|
#define DW_VR_MII_EEE_RX_QUIET_EN BIT(3) /* Rx Quiet Enable */
|
|
#define DW_VR_MII_EEE_TX_EN_CTRL BIT(4) /* Tx Control Enable */
|
|
#define DW_VR_MII_EEE_RX_EN_CTRL BIT(7) /* Rx Control Enable */
|
|
|
|
#define DW_VR_MII_EEE_MULT_FACT_100NS_SHIFT 8
|
|
#define DW_VR_MII_EEE_MULT_FACT_100NS GENMASK(11, 8)
|
|
|
|
/* VR MII EEE Control 1 defines */
|
|
#define DW_VR_MII_EEE_TRN_LPI BIT(0) /* Transparent Mode Enable */
|
|
|
|
int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg);
|
|
int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val);
|
|
int xpcs_read_vpcs(struct dw_xpcs *xpcs, int reg);
|
|
int xpcs_write_vpcs(struct dw_xpcs *xpcs, int reg, u16 val);
|
|
int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs);
|
|
int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs);
|
|
int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs);
|
|
int txgbe_xpcs_switch_mode(struct dw_xpcs *xpcs, phy_interface_t interface);
|