mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-30 08:02:30 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/iio
History
David Lechner 2b84f4ded4 iio: adc: ti-ads7950: Drop "ti-" prefix from module name 
This drops the "ti-" prefix from the module name. It makes the module name
consistent with other iio ti-ads* drivers and it makes the driver work
with device tree (the spi subsystem drops the "ti," prefix when matching
compatible strings from device tree).

Tested working on LEGO MINDSTORMS EV3 with the following device tree node:

	adc@3 {
		compatible = "ti,ads7957";
		reg = <3>;
		#io-channel-cells = <1>;
		spi-max-frequency = <10000000>;
		vref-supply = <&adc_ref>;
	};

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-15 13:52:51 +00:00
..
accel iio:kfifo_buf header include push down. 2017-01-10 19:54:53 +00:00
adc iio: adc: ti-ads7950: Drop "ti-" prefix from module name 2017-01-15 13:52:51 +00:00
amplifiers
buffer iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
chemical iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value 2016-10-23 22:18:27 +01:00
common iio:kfifo_buf header include push down. 2017-01-10 19:54:53 +00:00
counter iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
dac iio: dac: ad5593r: Add ACPI support 2016-12-30 17:20:14 +00:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio:kfifo_buf header include push down. 2017-01-10 19:54:53 +00:00
health First round of IIO new device support, features and cleanups for the 4.8 cycle. 2016-06-09 09:15:58 -07:00
humidity iio: humidity: Support acpi probe for hts211 2016-12-03 08:56:28 +00:00
imu iio: imu: add support to lsm6dsx driver 2017-01-14 12:40:37 +00:00
light iio: light: add driver for Capella CM3605 2016-12-30 17:17:39 +00:00
magnetometer iio: magnetometer: ak8974: remove redundant zero timeout check 2017-01-14 13:10:04 +00:00
orientation iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) 2016-11-05 17:47:47 +00:00
potentiometer iio: mcp4531: provide range of available raw values 2016-11-13 11:40:26 +00:00
potentiostat iio: potentiostat: add LMP91000 support 2016-09-27 20:33:03 +01:00
pressure iio: st_pressure: Export sampling frequency for lps25h and lps331ap 2016-12-30 11:33:56 +00:00
proximity iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property 2016-12-31 15:18:31 +00:00
temperature iio:temperature: Add support for TI TMP007 sensor 2017-01-14 10:45:05 +00:00
trigger iio:trigger: Experimental kthread tight loop trigger (thread only) 2016-06-03 13:18:44 +01:00
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
iio_core_trigger.h
industrialio-buffer.c iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
industrialio-configfs.c
industrialio-core.c iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c iio:trigger: Add helper function to verify that a trigger belongs to the same device 2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
inkern.c iio: inkern: pass through raw values if no scaling 2017-01-14 12:20:18 +00:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00