linux-stable/include/linux/qcom-geni-se.h
Linus Torvalds 2e368dd2bb ARM: SoC-related driver updates
Various driver updates for platforms. A bulk of this is smaller fixes or
 cleanups, but some of the new material this time around is:
 
  - Support for Nvidia Tegra234 SoC
  - Ring accelerator support for TI AM65x
  - PRUSS driver for TI platforms
  - Renesas support for R-Car V3U SoC
  - Reset support for Cortex-M4 processor on i.MX8MQ
 
 There are also new socinfo entries for a handful of different SoCs
 and platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TUboPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3T4YP/R5pjF2C1gt8FrCaG4IfhIY1VHWelfPcB5qB
 RC7Pn4MCRCEY+10YPXA70oS6KBaC+gtZ4bPeInzfLXh1ynFJJb+XtAIxoRhnkEw+
 /R979wNcIls9JqkvnHWFx29Y008W2ZNcXVNKH7O2Gxy+eKzDcTMsoH/zj8xWrV5b
 +eBllTzGU4RArYRJdcwOBQwMO6L2pzADHZ7hGMAY//8fo+qrxg8b9EINsH1UHCa8
 gQdWdVlmv6GeLB6RYLRBCWxpW4jOLDqEAvyDV84QQmYHvzD9tqJExNR0hfGTs4TU
 TZWK7LWSNqF0ujQUbFh9Ikcx6DypU1gvE7LKhCDrf4D7HLRX5v4BjGH+xtVtjsyD
 xzh4WEoa3qCNu1mxQjKG8Y6U7bB9cRI2TPVxbbmI4ZuF0njvybecwwOZUBQl4aD4
 5x+Df3pO/E5ECLOBeTnLgvw20fcjHv4HP8l63B6ADb31FUiZrJXItvayY5qXWe+P
 HSgUykmVA4nd4PnLsSj9seyWqOTIqUZ3U3TsmfxIQh2Otie01okwuHb1J7ErO/u0
 W148SgSwVbnkPxjbBHKGgC2r+Q/AjSDGRBYL0ThIVFUztxTBBwhj3FIvMnyyxTIj
 yFBY14KQ8FcNUs8DrbPCaAx/RDCB02IHdvvIlyTmU3RBq7UhJVIglpLzzo2ed9F2
 5u/aVH3y
 =tfPb
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms. A bulk of this is smaller fixes
  or cleanups, but some of the new material this time around is:

   - Support for Nvidia Tegra234 SoC

   - Ring accelerator support for TI AM65x

   - PRUSS driver for TI platforms

   - Renesas support for R-Car V3U SoC

   - Reset support for Cortex-M4 processor on i.MX8MQ

  There are also new socinfo entries for a handful of different SoCs and
  platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
  drm/mediatek: reduce clear event
  soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
  soc: mediatek: cmdq: add jump function
  soc: mediatek: cmdq: add write_s_mask value function
  soc: mediatek: cmdq: add write_s value function
  soc: mediatek: cmdq: add read_s function
  soc: mediatek: cmdq: add write_s_mask function
  soc: mediatek: cmdq: add write_s function
  soc: mediatek: cmdq: add address shift in jump
  soc: mediatek: mtk-infracfg: Fix kerneldoc
  soc: amlogic: pm-domains: use always-on flag
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  ...
2020-10-24 10:39:22 -07:00

468 lines
13 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
*/
#ifndef _LINUX_QCOM_GENI_SE
#define _LINUX_QCOM_GENI_SE
#include <linux/interconnect.h>
/* Transfer mode supported by GENI Serial Engines */
enum geni_se_xfer_mode {
GENI_SE_INVALID,
GENI_SE_FIFO,
GENI_SE_DMA,
};
/* Protocols supported by GENI Serial Engines */
enum geni_se_protocol_type {
GENI_SE_NONE,
GENI_SE_SPI,
GENI_SE_UART,
GENI_SE_I2C,
GENI_SE_I3C,
};
struct geni_wrapper;
struct clk;
enum geni_icc_path_index {
GENI_TO_CORE,
CPU_TO_GENI,
GENI_TO_DDR
};
struct geni_icc_path {
struct icc_path *path;
unsigned int avg_bw;
};
/**
* struct geni_se - GENI Serial Engine
* @base: Base Address of the Serial Engine's register block
* @dev: Pointer to the Serial Engine device
* @wrapper: Pointer to the parent QUP Wrapper core
* @clk: Handle to the core serial engine clock
* @num_clk_levels: Number of valid clock levels in clk_perf_tbl
* @clk_perf_tbl: Table of clock frequency input to serial engine clock
* @icc_paths: Array of ICC paths for SE
* @opp_table: Pointer to the OPP table
* @has_opp_table: Specifies if the SE has an OPP table
*/
struct geni_se {
void __iomem *base;
struct device *dev;
struct geni_wrapper *wrapper;
struct clk *clk;
unsigned int num_clk_levels;
unsigned long *clk_perf_tbl;
struct geni_icc_path icc_paths[3];
struct opp_table *opp_table;
bool has_opp_table;
};
/* Common SE registers */
#define GENI_FORCE_DEFAULT_REG 0x20
#define SE_GENI_STATUS 0x40
#define GENI_SER_M_CLK_CFG 0x48
#define GENI_SER_S_CLK_CFG 0x4c
#define GENI_FW_REVISION_RO 0x68
#define SE_GENI_CLK_SEL 0x7c
#define SE_GENI_DMA_MODE_EN 0x258
#define SE_GENI_M_CMD0 0x600
#define SE_GENI_M_CMD_CTRL_REG 0x604
#define SE_GENI_M_IRQ_STATUS 0x610
#define SE_GENI_M_IRQ_EN 0x614
#define SE_GENI_M_IRQ_CLEAR 0x618
#define SE_GENI_S_CMD0 0x630
#define SE_GENI_S_CMD_CTRL_REG 0x634
#define SE_GENI_S_IRQ_STATUS 0x640
#define SE_GENI_S_IRQ_EN 0x644
#define SE_GENI_S_IRQ_CLEAR 0x648
#define SE_GENI_TX_FIFOn 0x700
#define SE_GENI_RX_FIFOn 0x780
#define SE_GENI_TX_FIFO_STATUS 0x800
#define SE_GENI_RX_FIFO_STATUS 0x804
#define SE_GENI_TX_WATERMARK_REG 0x80c
#define SE_GENI_RX_WATERMARK_REG 0x810
#define SE_GENI_RX_RFR_WATERMARK_REG 0x814
#define SE_GENI_IOS 0x908
#define SE_DMA_TX_IRQ_STAT 0xc40
#define SE_DMA_TX_IRQ_CLR 0xc44
#define SE_DMA_TX_FSM_RST 0xc58
#define SE_DMA_RX_IRQ_STAT 0xd40
#define SE_DMA_RX_IRQ_CLR 0xd44
#define SE_DMA_RX_FSM_RST 0xd58
#define SE_HW_PARAM_0 0xe24
#define SE_HW_PARAM_1 0xe28
/* GENI_FORCE_DEFAULT_REG fields */
#define FORCE_DEFAULT BIT(0)
/* GENI_STATUS fields */
#define M_GENI_CMD_ACTIVE BIT(0)
#define S_GENI_CMD_ACTIVE BIT(12)
/* GENI_SER_M_CLK_CFG/GENI_SER_S_CLK_CFG */
#define SER_CLK_EN BIT(0)
#define CLK_DIV_MSK GENMASK(15, 4)
#define CLK_DIV_SHFT 4
/* GENI_FW_REVISION_RO fields */
#define FW_REV_PROTOCOL_MSK GENMASK(15, 8)
#define FW_REV_PROTOCOL_SHFT 8
/* GENI_CLK_SEL fields */
#define CLK_SEL_MSK GENMASK(2, 0)
/* SE_GENI_DMA_MODE_EN */
#define GENI_DMA_MODE_EN BIT(0)
/* GENI_M_CMD0 fields */
#define M_OPCODE_MSK GENMASK(31, 27)
#define M_OPCODE_SHFT 27
#define M_PARAMS_MSK GENMASK(26, 0)
/* GENI_M_CMD_CTRL_REG */
#define M_GENI_CMD_CANCEL BIT(2)
#define M_GENI_CMD_ABORT BIT(1)
#define M_GENI_DISABLE BIT(0)
/* GENI_S_CMD0 fields */
#define S_OPCODE_MSK GENMASK(31, 27)
#define S_OPCODE_SHFT 27
#define S_PARAMS_MSK GENMASK(26, 0)
/* GENI_S_CMD_CTRL_REG */
#define S_GENI_CMD_CANCEL BIT(2)
#define S_GENI_CMD_ABORT BIT(1)
#define S_GENI_DISABLE BIT(0)
/* GENI_M_IRQ_EN fields */
#define M_CMD_DONE_EN BIT(0)
#define M_CMD_OVERRUN_EN BIT(1)
#define M_ILLEGAL_CMD_EN BIT(2)
#define M_CMD_FAILURE_EN BIT(3)
#define M_CMD_CANCEL_EN BIT(4)
#define M_CMD_ABORT_EN BIT(5)
#define M_TIMESTAMP_EN BIT(6)
#define M_RX_IRQ_EN BIT(7)
#define M_GP_SYNC_IRQ_0_EN BIT(8)
#define M_GP_IRQ_0_EN BIT(9)
#define M_GP_IRQ_1_EN BIT(10)
#define M_GP_IRQ_2_EN BIT(11)
#define M_GP_IRQ_3_EN BIT(12)
#define M_GP_IRQ_4_EN BIT(13)
#define M_GP_IRQ_5_EN BIT(14)
#define M_IO_DATA_DEASSERT_EN BIT(22)
#define M_IO_DATA_ASSERT_EN BIT(23)
#define M_RX_FIFO_RD_ERR_EN BIT(24)
#define M_RX_FIFO_WR_ERR_EN BIT(25)
#define M_RX_FIFO_WATERMARK_EN BIT(26)
#define M_RX_FIFO_LAST_EN BIT(27)
#define M_TX_FIFO_RD_ERR_EN BIT(28)
#define M_TX_FIFO_WR_ERR_EN BIT(29)
#define M_TX_FIFO_WATERMARK_EN BIT(30)
#define M_SEC_IRQ_EN BIT(31)
#define M_COMMON_GENI_M_IRQ_EN (GENMASK(6, 1) | \
M_IO_DATA_DEASSERT_EN | \
M_IO_DATA_ASSERT_EN | M_RX_FIFO_RD_ERR_EN | \
M_RX_FIFO_WR_ERR_EN | M_TX_FIFO_RD_ERR_EN | \
M_TX_FIFO_WR_ERR_EN)
/* GENI_S_IRQ_EN fields */
#define S_CMD_DONE_EN BIT(0)
#define S_CMD_OVERRUN_EN BIT(1)
#define S_ILLEGAL_CMD_EN BIT(2)
#define S_CMD_FAILURE_EN BIT(3)
#define S_CMD_CANCEL_EN BIT(4)
#define S_CMD_ABORT_EN BIT(5)
#define S_GP_SYNC_IRQ_0_EN BIT(8)
#define S_GP_IRQ_0_EN BIT(9)
#define S_GP_IRQ_1_EN BIT(10)
#define S_GP_IRQ_2_EN BIT(11)
#define S_GP_IRQ_3_EN BIT(12)
#define S_GP_IRQ_4_EN BIT(13)
#define S_GP_IRQ_5_EN BIT(14)
#define S_IO_DATA_DEASSERT_EN BIT(22)
#define S_IO_DATA_ASSERT_EN BIT(23)
#define S_RX_FIFO_RD_ERR_EN BIT(24)
#define S_RX_FIFO_WR_ERR_EN BIT(25)
#define S_RX_FIFO_WATERMARK_EN BIT(26)
#define S_RX_FIFO_LAST_EN BIT(27)
#define S_COMMON_GENI_S_IRQ_EN (GENMASK(5, 1) | GENMASK(13, 9) | \
S_RX_FIFO_RD_ERR_EN | S_RX_FIFO_WR_ERR_EN)
/* GENI_/TX/RX/RX_RFR/_WATERMARK_REG fields */
#define WATERMARK_MSK GENMASK(5, 0)
/* GENI_TX_FIFO_STATUS fields */
#define TX_FIFO_WC GENMASK(27, 0)
/* GENI_RX_FIFO_STATUS fields */
#define RX_LAST BIT(31)
#define RX_LAST_BYTE_VALID_MSK GENMASK(30, 28)
#define RX_LAST_BYTE_VALID_SHFT 28
#define RX_FIFO_WC_MSK GENMASK(24, 0)
/* SE_GENI_IOS fields */
#define IO2_DATA_IN BIT(1)
#define RX_DATA_IN BIT(0)
/* SE_DMA_TX_IRQ_STAT Register fields */
#define TX_DMA_DONE BIT(0)
#define TX_EOT BIT(1)
#define TX_SBE BIT(2)
#define TX_RESET_DONE BIT(3)
/* SE_DMA_RX_IRQ_STAT Register fields */
#define RX_DMA_DONE BIT(0)
#define RX_EOT BIT(1)
#define RX_SBE BIT(2)
#define RX_RESET_DONE BIT(3)
#define RX_FLUSH_DONE BIT(4)
#define RX_GENI_GP_IRQ GENMASK(10, 5)
#define RX_GENI_CANCEL_IRQ BIT(11)
#define RX_GENI_GP_IRQ_EXT GENMASK(13, 12)
/* SE_HW_PARAM_0 fields */
#define TX_FIFO_WIDTH_MSK GENMASK(29, 24)
#define TX_FIFO_WIDTH_SHFT 24
#define TX_FIFO_DEPTH_MSK GENMASK(21, 16)
#define TX_FIFO_DEPTH_SHFT 16
/* SE_HW_PARAM_1 fields */
#define RX_FIFO_WIDTH_MSK GENMASK(29, 24)
#define RX_FIFO_WIDTH_SHFT 24
#define RX_FIFO_DEPTH_MSK GENMASK(21, 16)
#define RX_FIFO_DEPTH_SHFT 16
#define HW_VER_MAJOR_MASK GENMASK(31, 28)
#define HW_VER_MAJOR_SHFT 28
#define HW_VER_MINOR_MASK GENMASK(27, 16)
#define HW_VER_MINOR_SHFT 16
#define HW_VER_STEP_MASK GENMASK(15, 0)
#define GENI_SE_VERSION_MAJOR(ver) ((ver & HW_VER_MAJOR_MASK) >> HW_VER_MAJOR_SHFT)
#define GENI_SE_VERSION_MINOR(ver) ((ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT)
#define GENI_SE_VERSION_STEP(ver) (ver & HW_VER_STEP_MASK)
/* QUP SE VERSION value for major number 2 and minor number 5 */
#define QUP_SE_VERSION_2_5 0x20050000
/*
* Define bandwidth thresholds that cause the underlying Core 2X interconnect
* clock to run at the named frequency. These baseline values are recommended
* by the hardware team, and are not dynamically scaled with GENI bandwidth
* beyond basic on/off.
*/
#define CORE_2X_19_2_MHZ 960
#define CORE_2X_50_MHZ 2500
#define CORE_2X_100_MHZ 5000
#define CORE_2X_150_MHZ 7500
#define CORE_2X_200_MHZ 10000
#define CORE_2X_236_MHZ 16383
#define GENI_DEFAULT_BW Bps_to_icc(1000)
#if IS_ENABLED(CONFIG_QCOM_GENI_SE)
u32 geni_se_get_qup_hw_version(struct geni_se *se);
/**
* geni_se_read_proto() - Read the protocol configured for a serial engine
* @se: Pointer to the concerned serial engine.
*
* Return: Protocol value as configured in the serial engine.
*/
static inline u32 geni_se_read_proto(struct geni_se *se)
{
u32 val;
val = readl_relaxed(se->base + GENI_FW_REVISION_RO);
return (val & FW_REV_PROTOCOL_MSK) >> FW_REV_PROTOCOL_SHFT;
}
/**
* geni_se_setup_m_cmd() - Setup the primary sequencer
* @se: Pointer to the concerned serial engine.
* @cmd: Command/Operation to setup in the primary sequencer.
* @params: Parameter for the sequencer command.
*
* This function is used to configure the primary sequencer with the
* command and its associated parameters.
*/
static inline void geni_se_setup_m_cmd(struct geni_se *se, u32 cmd, u32 params)
{
u32 m_cmd;
m_cmd = (cmd << M_OPCODE_SHFT) | (params & M_PARAMS_MSK);
writel(m_cmd, se->base + SE_GENI_M_CMD0);
}
/**
* geni_se_setup_s_cmd() - Setup the secondary sequencer
* @se: Pointer to the concerned serial engine.
* @cmd: Command/Operation to setup in the secondary sequencer.
* @params: Parameter for the sequencer command.
*
* This function is used to configure the secondary sequencer with the
* command and its associated parameters.
*/
static inline void geni_se_setup_s_cmd(struct geni_se *se, u32 cmd, u32 params)
{
u32 s_cmd;
s_cmd = readl_relaxed(se->base + SE_GENI_S_CMD0);
s_cmd &= ~(S_OPCODE_MSK | S_PARAMS_MSK);
s_cmd |= (cmd << S_OPCODE_SHFT);
s_cmd |= (params & S_PARAMS_MSK);
writel(s_cmd, se->base + SE_GENI_S_CMD0);
}
/**
* geni_se_cancel_m_cmd() - Cancel the command configured in the primary
* sequencer
* @se: Pointer to the concerned serial engine.
*
* This function is used to cancel the currently configured command in the
* primary sequencer.
*/
static inline void geni_se_cancel_m_cmd(struct geni_se *se)
{
writel_relaxed(M_GENI_CMD_CANCEL, se->base + SE_GENI_M_CMD_CTRL_REG);
}
/**
* geni_se_cancel_s_cmd() - Cancel the command configured in the secondary
* sequencer
* @se: Pointer to the concerned serial engine.
*
* This function is used to cancel the currently configured command in the
* secondary sequencer.
*/
static inline void geni_se_cancel_s_cmd(struct geni_se *se)
{
writel_relaxed(S_GENI_CMD_CANCEL, se->base + SE_GENI_S_CMD_CTRL_REG);
}
/**
* geni_se_abort_m_cmd() - Abort the command configured in the primary sequencer
* @se: Pointer to the concerned serial engine.
*
* This function is used to force abort the currently configured command in the
* primary sequencer.
*/
static inline void geni_se_abort_m_cmd(struct geni_se *se)
{
writel_relaxed(M_GENI_CMD_ABORT, se->base + SE_GENI_M_CMD_CTRL_REG);
}
/**
* geni_se_abort_s_cmd() - Abort the command configured in the secondary
* sequencer
* @se: Pointer to the concerned serial engine.
*
* This function is used to force abort the currently configured command in the
* secondary sequencer.
*/
static inline void geni_se_abort_s_cmd(struct geni_se *se)
{
writel_relaxed(S_GENI_CMD_ABORT, se->base + SE_GENI_S_CMD_CTRL_REG);
}
/**
* geni_se_get_tx_fifo_depth() - Get the TX fifo depth of the serial engine
* @se: Pointer to the concerned serial engine.
*
* This function is used to get the depth i.e. number of elements in the
* TX fifo of the serial engine.
*
* Return: TX fifo depth in units of FIFO words.
*/
static inline u32 geni_se_get_tx_fifo_depth(struct geni_se *se)
{
u32 val;
val = readl_relaxed(se->base + SE_HW_PARAM_0);
return (val & TX_FIFO_DEPTH_MSK) >> TX_FIFO_DEPTH_SHFT;
}
/**
* geni_se_get_tx_fifo_width() - Get the TX fifo width of the serial engine
* @se: Pointer to the concerned serial engine.
*
* This function is used to get the width i.e. word size per element in the
* TX fifo of the serial engine.
*
* Return: TX fifo width in bits
*/
static inline u32 geni_se_get_tx_fifo_width(struct geni_se *se)
{
u32 val;
val = readl_relaxed(se->base + SE_HW_PARAM_0);
return (val & TX_FIFO_WIDTH_MSK) >> TX_FIFO_WIDTH_SHFT;
}
/**
* geni_se_get_rx_fifo_depth() - Get the RX fifo depth of the serial engine
* @se: Pointer to the concerned serial engine.
*
* This function is used to get the depth i.e. number of elements in the
* RX fifo of the serial engine.
*
* Return: RX fifo depth in units of FIFO words
*/
static inline u32 geni_se_get_rx_fifo_depth(struct geni_se *se)
{
u32 val;
val = readl_relaxed(se->base + SE_HW_PARAM_1);
return (val & RX_FIFO_DEPTH_MSK) >> RX_FIFO_DEPTH_SHFT;
}
void geni_se_init(struct geni_se *se, u32 rx_wm, u32 rx_rfr);
void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode);
void geni_se_config_packing(struct geni_se *se, int bpw, int pack_words,
bool msb_to_lsb, bool tx_cfg, bool rx_cfg);
int geni_se_resources_off(struct geni_se *se);
int geni_se_resources_on(struct geni_se *se);
int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl);
int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
unsigned int *index, unsigned long *res_freq,
bool exact);
int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len,
dma_addr_t *iova);
int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len,
dma_addr_t *iova);
void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
int geni_icc_get(struct geni_se *se, const char *icc_ddr);
int geni_icc_set_bw(struct geni_se *se);
void geni_icc_set_tag(struct geni_se *se, u32 tag);
int geni_icc_enable(struct geni_se *se);
int geni_icc_disable(struct geni_se *se);
void geni_remove_earlycon_icc_vote(void);
#endif
#endif