mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Subbaraya Sundeep](/assets/img/avatar_default.png)
Add support to set completion queue event size via ethtool -G parameter and get it via ethtool -g parameter. ~ # ./ethtool -G eth0 cqe-size 512 ~ # ./ethtool -g eth0 Ring parameters for eth0: Pre-set maximums: RX: 1048576 RX Mini: n/a RX Jumbo: n/a TX: 1048576 Current hardware settings: RX: 256 RX Mini: n/a RX Jumbo: n/a TX: 4096 RX Buf Len: 2048 CQE Size: 128 Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1721 lines
84 KiB
ReStructuredText
1721 lines
84 KiB
ReStructuredText
=============================
|
|
Netlink interface for ethtool
|
|
=============================
|
|
|
|
|
|
Basic information
|
|
=================
|
|
|
|
Netlink interface for ethtool uses generic netlink family ``ethtool``
|
|
(userspace application should use macros ``ETHTOOL_GENL_NAME`` and
|
|
``ETHTOOL_GENL_VERSION`` defined in ``<linux/ethtool_netlink.h>`` uapi
|
|
header). This family does not use a specific header, all information in
|
|
requests and replies is passed using netlink attributes.
|
|
|
|
The ethtool netlink interface uses extended ACK for error and warning
|
|
reporting, userspace application developers are encouraged to make these
|
|
messages available to user in a suitable way.
|
|
|
|
Requests can be divided into three categories: "get" (retrieving information),
|
|
"set" (setting parameters) and "action" (invoking an action).
|
|
|
|
All "set" and "action" type requests require admin privileges
|
|
(``CAP_NET_ADMIN`` in the namespace). Most "get" type requests are allowed for
|
|
anyone but there are exceptions (where the response contains sensitive
|
|
information). In some cases, the request as such is allowed for anyone but
|
|
unprivileged users have attributes with sensitive information (e.g.
|
|
wake-on-lan password) omitted.
|
|
|
|
|
|
Conventions
|
|
===========
|
|
|
|
Attributes which represent a boolean value usually use NLA_U8 type so that we
|
|
can distinguish three states: "on", "off" and "not present" (meaning the
|
|
information is not available in "get" requests or value is not to be changed
|
|
in "set" requests). For these attributes, the "true" value should be passed as
|
|
number 1 but any non-zero value should be understood as "true" by recipient.
|
|
In the tables below, "bool" denotes NLA_U8 attributes interpreted in this way.
|
|
|
|
In the message structure descriptions below, if an attribute name is suffixed
|
|
with "+", parent nest can contain multiple attributes of the same type. This
|
|
implements an array of entries.
|
|
|
|
Attributes that need to be filled-in by device drivers and that are dumped to
|
|
user space based on whether they are valid or not should not use zero as a
|
|
valid value. This avoids the need to explicitly signal the validity of the
|
|
attribute in the device driver API.
|
|
|
|
|
|
Request header
|
|
==============
|
|
|
|
Each request or reply message contains a nested attribute with common header.
|
|
Structure of this header is
|
|
|
|
============================== ====== =============================
|
|
``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex
|
|
``ETHTOOL_A_HEADER_DEV_NAME`` string device name
|
|
``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests
|
|
============================== ====== =============================
|
|
|
|
``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the
|
|
device message relates to. One of them is sufficient in requests, if both are
|
|
used, they must identify the same device. Some requests, e.g. global string
|
|
sets, do not require device identification. Most ``GET`` requests also allow
|
|
dump requests without device identification to query the same information for
|
|
all devices providing it (each device in a separate message).
|
|
|
|
``ETHTOOL_A_HEADER_FLAGS`` is a bitmap of request flags common for all request
|
|
types. The interpretation of these flags is the same for all request types but
|
|
the flags may not apply to requests. Recognized flags are:
|
|
|
|
================================= ===================================
|
|
``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply
|
|
``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT)
|
|
``ETHTOOL_FLAG_STATS`` include optional device statistics
|
|
================================= ===================================
|
|
|
|
New request flags should follow the general idea that if the flag is not set,
|
|
the behaviour is backward compatible, i.e. requests from old clients not aware
|
|
of the flag should be interpreted the way the client expects. A client must
|
|
not set flags it does not understand.
|
|
|
|
|
|
Bit sets
|
|
========
|
|
|
|
For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32``
|
|
type is used. For arbitrary length bitmaps, ethtool netlink uses a nested
|
|
attribute with contents of one of two forms: compact (two binary bitmaps
|
|
representing bit values and mask of affected bits) and bit-by-bit (list of
|
|
bits identified by either index or name).
|
|
|
|
Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together
|
|
with their values which saves a round trip (when the bitset is passed in a
|
|
request) or at least a second request (when the bitset is in a reply). This is
|
|
useful for one shot applications like traditional ethtool command. On the
|
|
other hand, long running applications like ethtool monitor (displaying
|
|
notifications) or network management daemons may prefer fetching the names
|
|
only once and using compact form to save message size. Notifications from
|
|
ethtool netlink interface always use compact form for bitsets.
|
|
|
|
A bitset can represent either a value/mask pair (``ETHTOOL_A_BITSET_NOMASK``
|
|
not set) or a single bitmap (``ETHTOOL_A_BITSET_NOMASK`` set). In requests
|
|
modifying a bitmap, the former changes the bit set in mask to values set in
|
|
value and preserves the rest; the latter sets the bits set in the bitmap and
|
|
clears the rest.
|
|
|
|
Compact form: nested (bitset) atrribute contents:
|
|
|
|
============================ ====== ============================
|
|
``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list
|
|
``ETHTOOL_A_BITSET_SIZE`` u32 number of significant bits
|
|
``ETHTOOL_A_BITSET_VALUE`` binary bitmap of bit values
|
|
``ETHTOOL_A_BITSET_MASK`` binary bitmap of valid bits
|
|
============================ ====== ============================
|
|
|
|
Value and mask must have length at least ``ETHTOOL_A_BITSET_SIZE`` bits
|
|
rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte
|
|
order, words ordered from least significant to most significant (i.e. the same
|
|
way as bitmaps are passed with ioctl interface).
|
|
|
|
For compact form, ``ETHTOOL_A_BITSET_SIZE`` and ``ETHTOOL_A_BITSET_VALUE`` are
|
|
mandatory. ``ETHTOOL_A_BITSET_MASK`` attribute is mandatory if
|
|
``ETHTOOL_A_BITSET_NOMASK`` is not set (bitset represents a value/mask pair);
|
|
if ``ETHTOOL_A_BITSET_NOMASK`` is not set, ``ETHTOOL_A_BITSET_MASK`` is not
|
|
allowed (bitset represents a single bitmap.
|
|
|
|
Kernel bit set length may differ from userspace length if older application is
|
|
used on newer kernel or vice versa. If userspace bitmap is longer, an error is
|
|
issued only if the request actually tries to set values of some bits not
|
|
recognized by kernel.
|
|
|
|
Bit-by-bit form: nested (bitset) attribute contents:
|
|
|
|
+------------------------------------+--------+-----------------------------+
|
|
| ``ETHTOOL_A_BITSET_NOMASK`` | flag | no mask, only a list |
|
|
+------------------------------------+--------+-----------------------------+
|
|
| ``ETHTOOL_A_BITSET_SIZE`` | u32 | number of significant bits |
|
|
+------------------------------------+--------+-----------------------------+
|
|
| ``ETHTOOL_A_BITSET_BITS`` | nested | array of bits |
|
|
+-+----------------------------------+--------+-----------------------------+
|
|
| | ``ETHTOOL_A_BITSET_BITS_BIT+`` | nested | one bit |
|
|
+-+-+--------------------------------+--------+-----------------------------+
|
|
| | | ``ETHTOOL_A_BITSET_BIT_INDEX`` | u32 | bit index (0 for LSB) |
|
|
+-+-+--------------------------------+--------+-----------------------------+
|
|
| | | ``ETHTOOL_A_BITSET_BIT_NAME`` | string | bit name |
|
|
+-+-+--------------------------------+--------+-----------------------------+
|
|
| | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set |
|
|
+-+-+--------------------------------+--------+-----------------------------+
|
|
|
|
Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can
|
|
only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an
|
|
arbitrary number of them. A bit may be identified by its index or by its
|
|
name. When used in requests, listed bits are set to 0 or 1 according to
|
|
``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if
|
|
index exceeds kernel bit length or if name is not recognized.
|
|
|
|
When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as
|
|
a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in
|
|
such case. Such bitset represents a bitmap with listed bits set and the rest
|
|
zero.
|
|
|
|
In requests, application can use either form. Form used by kernel in reply is
|
|
determined by ``ETHTOOL_FLAG_COMPACT_BITSETS`` flag in flags field of request
|
|
header. Semantics of value and mask depends on the attribute.
|
|
|
|
|
|
List of message types
|
|
=====================
|
|
|
|
All constants identifying message types use ``ETHTOOL_CMD_`` prefix and suffix
|
|
according to message purpose:
|
|
|
|
============== ======================================
|
|
``_GET`` userspace request to retrieve data
|
|
``_SET`` userspace request to set data
|
|
``_ACT`` userspace request to perform an action
|
|
``_GET_REPLY`` kernel reply to a ``GET`` request
|
|
``_SET_REPLY`` kernel reply to a ``SET`` request
|
|
``_ACT_REPLY`` kernel reply to an ``ACT`` request
|
|
``_NTF`` kernel notification
|
|
============== ======================================
|
|
|
|
Userspace to kernel:
|
|
|
|
===================================== =================================
|
|
``ETHTOOL_MSG_STRSET_GET`` get string set
|
|
``ETHTOOL_MSG_LINKINFO_GET`` get link settings
|
|
``ETHTOOL_MSG_LINKINFO_SET`` set link settings
|
|
``ETHTOOL_MSG_LINKMODES_GET`` get link modes info
|
|
``ETHTOOL_MSG_LINKMODES_SET`` set link modes info
|
|
``ETHTOOL_MSG_LINKSTATE_GET`` get link state
|
|
``ETHTOOL_MSG_DEBUG_GET`` get debugging settings
|
|
``ETHTOOL_MSG_DEBUG_SET`` set debugging settings
|
|
``ETHTOOL_MSG_WOL_GET`` get wake-on-lan settings
|
|
``ETHTOOL_MSG_WOL_SET`` set wake-on-lan settings
|
|
``ETHTOOL_MSG_FEATURES_GET`` get device features
|
|
``ETHTOOL_MSG_FEATURES_SET`` set device features
|
|
``ETHTOOL_MSG_PRIVFLAGS_GET`` get private flags
|
|
``ETHTOOL_MSG_PRIVFLAGS_SET`` set private flags
|
|
``ETHTOOL_MSG_RINGS_GET`` get ring sizes
|
|
``ETHTOOL_MSG_RINGS_SET`` set ring sizes
|
|
``ETHTOOL_MSG_CHANNELS_GET`` get channel counts
|
|
``ETHTOOL_MSG_CHANNELS_SET`` set channel counts
|
|
``ETHTOOL_MSG_COALESCE_GET`` get coalescing parameters
|
|
``ETHTOOL_MSG_COALESCE_SET`` set coalescing parameters
|
|
``ETHTOOL_MSG_PAUSE_GET`` get pause parameters
|
|
``ETHTOOL_MSG_PAUSE_SET`` set pause parameters
|
|
``ETHTOOL_MSG_EEE_GET`` get EEE settings
|
|
``ETHTOOL_MSG_EEE_SET`` set EEE settings
|
|
``ETHTOOL_MSG_TSINFO_GET`` get timestamping info
|
|
``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test
|
|
``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test
|
|
``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info
|
|
``ETHTOOL_MSG_FEC_GET`` get FEC settings
|
|
``ETHTOOL_MSG_FEC_SET`` set FEC settings
|
|
``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM
|
|
``ETHTOOL_MSG_STATS_GET`` get standard statistics
|
|
``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info
|
|
``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters
|
|
``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters
|
|
===================================== =================================
|
|
|
|
Kernel to userspace:
|
|
|
|
======================================== =================================
|
|
``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents
|
|
``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings
|
|
``ETHTOOL_MSG_LINKINFO_NTF`` link settings notification
|
|
``ETHTOOL_MSG_LINKMODES_GET_REPLY`` link modes info
|
|
``ETHTOOL_MSG_LINKMODES_NTF`` link modes notification
|
|
``ETHTOOL_MSG_LINKSTATE_GET_REPLY`` link state info
|
|
``ETHTOOL_MSG_DEBUG_GET_REPLY`` debugging settings
|
|
``ETHTOOL_MSG_DEBUG_NTF`` debugging settings notification
|
|
``ETHTOOL_MSG_WOL_GET_REPLY`` wake-on-lan settings
|
|
``ETHTOOL_MSG_WOL_NTF`` wake-on-lan settings notification
|
|
``ETHTOOL_MSG_FEATURES_GET_REPLY`` device features
|
|
``ETHTOOL_MSG_FEATURES_SET_REPLY`` optional reply to FEATURES_SET
|
|
``ETHTOOL_MSG_FEATURES_NTF`` netdev features notification
|
|
``ETHTOOL_MSG_PRIVFLAGS_GET_REPLY`` private flags
|
|
``ETHTOOL_MSG_PRIVFLAGS_NTF`` private flags
|
|
``ETHTOOL_MSG_RINGS_GET_REPLY`` ring sizes
|
|
``ETHTOOL_MSG_RINGS_NTF`` ring sizes
|
|
``ETHTOOL_MSG_CHANNELS_GET_REPLY`` channel counts
|
|
``ETHTOOL_MSG_CHANNELS_NTF`` channel counts
|
|
``ETHTOOL_MSG_COALESCE_GET_REPLY`` coalescing parameters
|
|
``ETHTOOL_MSG_COALESCE_NTF`` coalescing parameters
|
|
``ETHTOOL_MSG_PAUSE_GET_REPLY`` pause parameters
|
|
``ETHTOOL_MSG_PAUSE_NTF`` pause parameters
|
|
``ETHTOOL_MSG_EEE_GET_REPLY`` EEE settings
|
|
``ETHTOOL_MSG_EEE_NTF`` EEE settings
|
|
``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info
|
|
``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results
|
|
``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results
|
|
``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info
|
|
``ETHTOOL_MSG_FEC_GET_REPLY`` FEC settings
|
|
``ETHTOOL_MSG_FEC_NTF`` FEC settings
|
|
``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM
|
|
``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics
|
|
``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info
|
|
``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters
|
|
======================================== =================================
|
|
|
|
``GET`` requests are sent by userspace applications to retrieve device
|
|
information. They usually do not contain any message specific attributes.
|
|
Kernel replies with corresponding "GET_REPLY" message. For most types, ``GET``
|
|
request with ``NLM_F_DUMP`` and no device identification can be used to query
|
|
the information for all devices supporting the request.
|
|
|
|
If the data can be also modified, corresponding ``SET`` message with the same
|
|
layout as corresponding ``GET_REPLY`` is used to request changes. Only
|
|
attributes where a change is requested are included in such request (also, not
|
|
all attributes may be changed). Replies to most ``SET`` request consist only
|
|
of error code and extack; if kernel provides additional data, it is sent in
|
|
the form of corresponding ``SET_REPLY`` message which can be suppressed by
|
|
setting ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header.
|
|
|
|
Data modification also triggers sending a ``NTF`` message with a notification.
|
|
These usually bear only a subset of attributes which was affected by the
|
|
change. The same notification is issued if the data is modified using other
|
|
means (mostly ioctl ethtool interface). Unlike notifications from ethtool
|
|
netlink code which are only sent if something actually changed, notifications
|
|
triggered by ioctl interface may be sent even if the request did not actually
|
|
change any data.
|
|
|
|
``ACT`` messages request kernel (driver) to perform a specific action. If some
|
|
information is reported by kernel (which can be suppressed by setting
|
|
``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header), the reply takes form of
|
|
an ``ACT_REPLY`` message. Performing an action also triggers a notification
|
|
(``NTF`` message).
|
|
|
|
Later sections describe the format and semantics of these messages.
|
|
|
|
|
|
STRSET_GET
|
|
==========
|
|
|
|
Requests contents of a string set as provided by ioctl commands
|
|
``ETHTOOL_GSSET_INFO`` and ``ETHTOOL_GSTRINGS.`` String sets are not user
|
|
writeable so that the corresponding ``STRSET_SET`` message is only used in
|
|
kernel replies. There are two types of string sets: global (independent of
|
|
a device, e.g. device feature names) and device specific (e.g. device private
|
|
flags).
|
|
|
|
Request contents:
|
|
|
|
+---------------------------------------+--------+------------------------+
|
|
| ``ETHTOOL_A_STRSET_HEADER`` | nested | request header |
|
|
+---------------------------------------+--------+------------------------+
|
|
| ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | string set to request |
|
|
+-+-------------------------------------+--------+------------------------+
|
|
| | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set |
|
|
+-+-+-----------------------------------+--------+------------------------+
|
|
| | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id |
|
|
+-+-+-----------------------------------+--------+------------------------+
|
|
|
|
Kernel response contents:
|
|
|
|
+---------------------------------------+--------+-----------------------+
|
|
| ``ETHTOOL_A_STRSET_HEADER`` | nested | reply header |
|
|
+---------------------------------------+--------+-----------------------+
|
|
| ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | array of string sets |
|
|
+-+-------------------------------------+--------+-----------------------+
|
|
| | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set |
|
|
+-+-+-----------------------------------+--------+-----------------------+
|
|
| | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id |
|
|
+-+-+-----------------------------------+--------+-----------------------+
|
|
| | | ``ETHTOOL_A_STRINGSET_COUNT`` | u32 | number of strings |
|
|
+-+-+-----------------------------------+--------+-----------------------+
|
|
| | | ``ETHTOOL_A_STRINGSET_STRINGS`` | nested | array of strings |
|
|
+-+-+-+---------------------------------+--------+-----------------------+
|
|
| | | | ``ETHTOOL_A_STRINGS_STRING+`` | nested | one string |
|
|
+-+-+-+-+-------------------------------+--------+-----------------------+
|
|
| | | | | ``ETHTOOL_A_STRING_INDEX`` | u32 | string index |
|
|
+-+-+-+-+-------------------------------+--------+-----------------------+
|
|
| | | | | ``ETHTOOL_A_STRING_VALUE`` | string | string value |
|
|
+-+-+-+-+-------------------------------+--------+-----------------------+
|
|
| ``ETHTOOL_A_STRSET_COUNTS_ONLY`` | flag | return only counts |
|
|
+---------------------------------------+--------+-----------------------+
|
|
|
|
Device identification in request header is optional. Depending on its presence
|
|
a and ``NLM_F_DUMP`` flag, there are three type of ``STRSET_GET`` requests:
|
|
|
|
- no ``NLM_F_DUMP,`` no device: get "global" stringsets
|
|
- no ``NLM_F_DUMP``, with device: get string sets related to the device
|
|
- ``NLM_F_DUMP``, no device: get device related string sets for all devices
|
|
|
|
If there is no ``ETHTOOL_A_STRSET_STRINGSETS`` array, all string sets of
|
|
requested type are returned, otherwise only those specified in the request.
|
|
Flag ``ETHTOOL_A_STRSET_COUNTS_ONLY`` tells kernel to only return string
|
|
counts of the sets, not the actual strings.
|
|
|
|
|
|
LINKINFO_GET
|
|
============
|
|
|
|
Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for
|
|
link modes and autonegotiation related information. The request does not use
|
|
any attributes.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_LINKINFO_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_LINKINFO_HEADER`` nested reply header
|
|
``ETHTOOL_A_LINKINFO_PORT`` u8 physical port
|
|
``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address
|
|
``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status
|
|
``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control
|
|
``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver
|
|
==================================== ====== ==========================
|
|
|
|
Attributes and their values have the same meaning as matching members of the
|
|
corresponding ioctl structures.
|
|
|
|
``LINKINFO_GET`` allows dump requests (kernel returns reply message for all
|
|
devices supporting the request).
|
|
|
|
|
|
LINKINFO_SET
|
|
============
|
|
|
|
``LINKINFO_SET`` request allows setting some of the attributes reported by
|
|
``LINKINFO_GET``.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_LINKINFO_HEADER`` nested request header
|
|
``ETHTOOL_A_LINKINFO_PORT`` u8 physical port
|
|
``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address
|
|
``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control
|
|
==================================== ====== ==========================
|
|
|
|
MDI(-X) status and transceiver cannot be set, request with the corresponding
|
|
attributes is rejected.
|
|
|
|
|
|
LINKMODES_GET
|
|
=============
|
|
|
|
Requests link modes (supported, advertised and peer advertised) and related
|
|
information (autonegotiation status, link speed and duplex) as provided by
|
|
``ETHTOOL_GLINKSETTINGS``. The request does not use any attributes.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_LINKMODES_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
========================================== ====== ==========================
|
|
``ETHTOOL_A_LINKMODES_HEADER`` nested reply header
|
|
``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status
|
|
``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes
|
|
``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
|
|
``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
|
|
``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
|
|
``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
|
|
``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state
|
|
========================================== ====== ==========================
|
|
|
|
For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask
|
|
represents supported modes. ``ETHTOOL_A_LINKMODES_PEER`` in the reply is a bit
|
|
list.
|
|
|
|
``LINKMODES_GET`` allows dump requests (kernel returns reply messages for all
|
|
devices supporting the request).
|
|
|
|
|
|
LINKMODES_SET
|
|
=============
|
|
|
|
Request contents:
|
|
|
|
========================================== ====== ==========================
|
|
``ETHTOOL_A_LINKMODES_HEADER`` nested request header
|
|
``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status
|
|
``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes
|
|
``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
|
|
``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
|
|
``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
|
|
``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
|
|
``ETHTOOL_A_LINKMODES_LANES`` u32 lanes
|
|
========================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If
|
|
autonegotiation is on (either set now or kept from before), advertised modes
|
|
are not changed (no ``ETHTOOL_A_LINKMODES_OURS`` attribute) and at least one
|
|
of speed, duplex and lanes is specified, kernel adjusts advertised modes to all
|
|
supported modes matching speed, duplex, lanes or all (whatever is specified).
|
|
This autoselection is done on ethtool side with ioctl interface, netlink
|
|
interface is supposed to allow requesting changes without knowing what exactly
|
|
kernel supports.
|
|
|
|
|
|
LINKSTATE_GET
|
|
=============
|
|
|
|
Requests link state information. Link up/down flag (as provided by
|
|
``ETHTOOL_GLINK`` ioctl command) is provided. Optionally, extended state might
|
|
be provided as well. In general, extended state describes reasons for why a port
|
|
is down, or why it operates in some non-obvious mode. This request does not have
|
|
any attributes.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_LINKSTATE_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ============================
|
|
``ETHTOOL_A_LINKSTATE_HEADER`` nested reply header
|
|
``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down)
|
|
``ETHTOOL_A_LINKSTATE_SQI`` u32 Current Signal Quality Index
|
|
``ETHTOOL_A_LINKSTATE_SQI_MAX`` u32 Max support SQI value
|
|
``ETHTOOL_A_LINKSTATE_EXT_STATE`` u8 link extended state
|
|
``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` u8 link extended substate
|
|
==================================== ====== ============================
|
|
|
|
For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns
|
|
carrier flag provided by ``netif_carrier_ok()`` but there are drivers which
|
|
define their own handler.
|
|
|
|
``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` are
|
|
optional values. ethtool core can provide either both
|
|
``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE``,
|
|
or only ``ETHTOOL_A_LINKSTATE_EXT_STATE``, or none of them.
|
|
|
|
``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all
|
|
devices supporting the request).
|
|
|
|
|
|
Link extended states:
|
|
|
|
================================================ ============================================
|
|
``ETHTOOL_LINK_EXT_STATE_AUTONEG`` States relating to the autonegotiation or
|
|
issues therein
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE`` Failure during link training
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH`` Logical mismatch in physical coding sublayer
|
|
or forward error correction sublayer
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY`` Signal integrity issues
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_NO_CABLE`` No cable connected
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE`` Failure is related to cable,
|
|
e.g., unsupported cable
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE`` Failure is related to EEPROM, e.g., failure
|
|
during reading or parsing the data
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE`` Failure during calibration algorithm
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED`` The hardware is not able to provide the
|
|
power required from cable or module
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated
|
|
|
|
``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue
|
|
================================================ ============================================
|
|
|
|
Link extended substates:
|
|
|
|
Autoneg substates:
|
|
|
|
=============================================================== ================================
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED`` Peer side is down
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED`` Ack not received from peer side
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED`` Next page exchange failed
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE`` Peer side is down during force
|
|
mode or there is no agreement of
|
|
speed
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE`` Forward error correction modes
|
|
in both sides are mismatched
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD`` No Highest Common Denominator
|
|
=============================================================== ================================
|
|
|
|
Link training substates:
|
|
|
|
=========================================================================== ====================
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED`` Frames were not
|
|
recognized, the
|
|
lock failed
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT`` The lock did not
|
|
occur before
|
|
timeout
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY`` Peer side did not
|
|
send ready signal
|
|
after training
|
|
process
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT`` Remote side is not
|
|
ready yet
|
|
=========================================================================== ====================
|
|
|
|
Link logical mismatch substates:
|
|
|
|
================================================================ ===============================
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK`` Physical coding sublayer was
|
|
not locked in first phase -
|
|
block lock
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK`` Physical coding sublayer was
|
|
not locked in second phase -
|
|
alignment markers lock
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS`` Physical coding sublayer did
|
|
not get align status
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED`` FC forward error correction is
|
|
not locked
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED`` RS forward error correction is
|
|
not locked
|
|
================================================================ ===============================
|
|
|
|
Bad signal integrity substates:
|
|
|
|
================================================================= =============================
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS`` Large number of physical
|
|
errors
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE`` The system attempted to
|
|
operate the cable at a rate
|
|
that is not formally
|
|
supported, which led to
|
|
signal integrity issues
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST`` The external clock signal for
|
|
SerDes is too weak or
|
|
unavailable.
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS`` The received signal for
|
|
SerDes is too weak because
|
|
analog loss of signal.
|
|
================================================================= =============================
|
|
|
|
Cable issue substates:
|
|
|
|
=================================================== ============================================
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE`` Unsupported cable
|
|
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure
|
|
=================================================== ============================================
|
|
|
|
Transceiver module issue substates:
|
|
|
|
=================================================== ============================================
|
|
``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach
|
|
the ModuleReady state. For example, if the
|
|
module is stuck at ModuleFault state
|
|
=================================================== ============================================
|
|
|
|
DEBUG_GET
|
|
=========
|
|
|
|
Requests debugging settings of a device. At the moment, only message mask is
|
|
provided.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_DEBUG_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_DEBUG_HEADER`` nested reply header
|
|
``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask
|
|
==================================== ====== ==========================
|
|
|
|
The message mask (``ETHTOOL_A_DEBUG_MSGMASK``) is equal to message level as
|
|
provided by ``ETHTOOL_GMSGLVL`` and set by ``ETHTOOL_SMSGLVL`` in ioctl
|
|
interface. While it is called message level there for historical reasons, most
|
|
drivers and almost all newer drivers use it as a mask of enabled message
|
|
classes (represented by ``NETIF_MSG_*`` constants); therefore netlink
|
|
interface follows its actual use in practice.
|
|
|
|
``DEBUG_GET`` allows dump requests (kernel returns reply messages for all
|
|
devices supporting the request).
|
|
|
|
|
|
DEBUG_SET
|
|
=========
|
|
|
|
Set or update debugging settings of a device. At the moment, only message mask
|
|
is supported.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_DEBUG_HEADER`` nested request header
|
|
``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask
|
|
==================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of
|
|
enabled debugging message types for the device.
|
|
|
|
|
|
WOL_GET
|
|
=======
|
|
|
|
Query device wake-on-lan settings. Unlike most "GET" type requests,
|
|
``ETHTOOL_MSG_WOL_GET`` requires (netns) ``CAP_NET_ADMIN`` privileges as it
|
|
(potentially) provides SecureOn(tm) password which is confidential.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_WOL_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_WOL_HEADER`` nested reply header
|
|
``ETHTOOL_A_WOL_MODES`` bitset mask of enabled WoL modes
|
|
``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password
|
|
==================================== ====== ==========================
|
|
|
|
In reply, ``ETHTOOL_A_WOL_MODES`` mask consists of modes supported by the
|
|
device, value of modes which are enabled. ``ETHTOOL_A_WOL_SOPASS`` is only
|
|
included in reply if ``WAKE_MAGICSECURE`` mode is supported.
|
|
|
|
|
|
WOL_SET
|
|
=======
|
|
|
|
Set or update wake-on-lan settings.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_WOL_HEADER`` nested request header
|
|
``ETHTOOL_A_WOL_MODES`` bitset enabled WoL modes
|
|
``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password
|
|
==================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_WOL_SOPASS`` is only allowed for devices supporting
|
|
``WAKE_MAGICSECURE`` mode.
|
|
|
|
|
|
FEATURES_GET
|
|
============
|
|
|
|
Gets netdev features like ``ETHTOOL_GFEATURES`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_FEATURES_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_FEATURES_HEADER`` nested reply header
|
|
``ETHTOOL_A_FEATURES_HW`` bitset dev->hw_features
|
|
``ETHTOOL_A_FEATURES_WANTED`` bitset dev->wanted_features
|
|
``ETHTOOL_A_FEATURES_ACTIVE`` bitset dev->features
|
|
``ETHTOOL_A_FEATURES_NOCHANGE`` bitset NETIF_F_NEVER_CHANGE
|
|
==================================== ====== ==========================
|
|
|
|
Bitmaps in kernel response have the same meaning as bitmaps used in ioctl
|
|
interference but attribute names are different (they are based on
|
|
corresponding members of struct net_device). Legacy "flags" are not provided,
|
|
if userspace needs them (most likely only ethtool for backward compatibility),
|
|
it can calculate their values from related feature bits itself.
|
|
ETHA_FEATURES_HW uses mask consisting of all features recognized by kernel (to
|
|
provide all names when using verbose bitmap format), the other three use no
|
|
mask (simple bit lists).
|
|
|
|
|
|
FEATURES_SET
|
|
============
|
|
|
|
Request to set netdev features like ``ETHTOOL_SFEATURES`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_FEATURES_HEADER`` nested request header
|
|
``ETHTOOL_A_FEATURES_WANTED`` bitset requested features
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_FEATURES_HEADER`` nested reply header
|
|
``ETHTOOL_A_FEATURES_WANTED`` bitset diff wanted vs. result
|
|
``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active
|
|
==================================== ====== ==========================
|
|
|
|
Request constains only one bitset which can be either value/mask pair (request
|
|
to change specific feature bits and leave the rest) or only a value (request
|
|
to set all features to specified set).
|
|
|
|
As request is subject to netdev_change_features() sanity checks, optional
|
|
kernel reply (can be suppressed by ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request
|
|
header) informs client about the actual result. ``ETHTOOL_A_FEATURES_WANTED``
|
|
reports the difference between client request and actual result: mask consists
|
|
of bits which differ between requested features and result (dev->features
|
|
after the operation), value consists of values of these bits in the request
|
|
(i.e. negated values from resulting features). ``ETHTOOL_A_FEATURES_ACTIVE``
|
|
reports the difference between old and new dev->features: mask consists of
|
|
bits which have changed, values are their values in new dev->features (after
|
|
the operation).
|
|
|
|
``ETHTOOL_MSG_FEATURES_NTF`` notification is sent not only if device features
|
|
are modified using ``ETHTOOL_MSG_FEATURES_SET`` request or on of ethtool ioctl
|
|
request but also each time features are modified with netdev_update_features()
|
|
or netdev_change_features().
|
|
|
|
|
|
PRIVFLAGS_GET
|
|
=============
|
|
|
|
Gets private flags like ``ETHTOOL_GPFLAGS`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_PRIVFLAGS_HEADER`` nested reply header
|
|
``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags
|
|
==================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_PRIVFLAGS_FLAGS`` is a bitset with values of device private flags.
|
|
These flags are defined by driver, their number and names (and also meaning)
|
|
are device dependent. For compact bitset format, names can be retrieved as
|
|
``ETH_SS_PRIV_FLAGS`` string set. If verbose bitset format is requested,
|
|
response uses all private flags supported by the device as mask so that client
|
|
gets the full information without having to fetch the string set with names.
|
|
|
|
|
|
PRIVFLAGS_SET
|
|
=============
|
|
|
|
Sets or modifies values of device private flags like ``ETHTOOL_SPFLAGS``
|
|
ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header
|
|
``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags
|
|
==================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_PRIVFLAGS_FLAGS`` can either set the whole set of private flags or
|
|
modify only values of some of them.
|
|
|
|
|
|
RINGS_GET
|
|
=========
|
|
|
|
Gets ring sizes like ``ETHTOOL_GRINGPARAM`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_RINGS_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ===========================
|
|
``ETHTOOL_A_RINGS_HEADER`` nested reply header
|
|
``ETHTOOL_A_RINGS_RX_MAX`` u32 max size of RX ring
|
|
``ETHTOOL_A_RINGS_RX_MINI_MAX`` u32 max size of RX mini ring
|
|
``ETHTOOL_A_RINGS_RX_JUMBO_MAX`` u32 max size of RX jumbo ring
|
|
``ETHTOOL_A_RINGS_TX_MAX`` u32 max size of TX ring
|
|
``ETHTOOL_A_RINGS_RX`` u32 size of RX ring
|
|
``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring
|
|
``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring
|
|
``ETHTOOL_A_RINGS_TX`` u32 size of TX ring
|
|
``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
|
|
``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split
|
|
``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE
|
|
==================================== ====== ===========================
|
|
|
|
``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with
|
|
page-flipping TCP zero-copy receive (``getsockopt(TCP_ZEROCOPY_RECEIVE)``).
|
|
If enabled the device is configured to place frame headers and data into
|
|
separate buffers. The device configuration must make it possible to receive
|
|
full memory pages of data, for example because MTU is high enough or through
|
|
HW-GRO.
|
|
|
|
|
|
RINGS_SET
|
|
=========
|
|
|
|
Sets ring sizes like ``ETHTOOL_SRINGPARAM`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ===========================
|
|
``ETHTOOL_A_RINGS_HEADER`` nested reply header
|
|
``ETHTOOL_A_RINGS_RX`` u32 size of RX ring
|
|
``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring
|
|
``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring
|
|
``ETHTOOL_A_RINGS_TX`` u32 size of TX ring
|
|
``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
|
|
``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE
|
|
==================================== ====== ===========================
|
|
|
|
Kernel checks that requested ring sizes do not exceed limits reported by
|
|
driver. Driver may impose additional constraints and may not suspport all
|
|
attributes.
|
|
|
|
|
|
``ETHTOOL_A_RINGS_CQE_SIZE`` specifies the completion queue event size.
|
|
Completion queue events(CQE) are the events posted by NIC to indicate the
|
|
completion status of a packet when the packet is sent(like send success or
|
|
error) or received(like pointers to packet fragments). The CQE size parameter
|
|
enables to modify the CQE size other than default size if NIC supports it.
|
|
A bigger CQE can have more receive buffer pointers inturn NIC can transfer
|
|
a bigger frame from wire. Based on the NIC hardware, the overall completion
|
|
queue size can be adjusted in the driver if CQE size is modified.
|
|
|
|
CHANNELS_GET
|
|
============
|
|
|
|
Gets channel counts like ``ETHTOOL_GCHANNELS`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_CHANNELS_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_CHANNELS_HEADER`` nested reply header
|
|
``ETHTOOL_A_CHANNELS_RX_MAX`` u32 max receive channels
|
|
``ETHTOOL_A_CHANNELS_TX_MAX`` u32 max transmit channels
|
|
``ETHTOOL_A_CHANNELS_OTHER_MAX`` u32 max other channels
|
|
``ETHTOOL_A_CHANNELS_COMBINED_MAX`` u32 max combined channels
|
|
``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count
|
|
``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count
|
|
``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count
|
|
``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count
|
|
===================================== ====== ==========================
|
|
|
|
|
|
CHANNELS_SET
|
|
============
|
|
|
|
Sets channel counts like ``ETHTOOL_SCHANNELS`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_CHANNELS_HEADER`` nested request header
|
|
``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count
|
|
``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count
|
|
``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count
|
|
``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count
|
|
===================================== ====== ==========================
|
|
|
|
Kernel checks that requested channel counts do not exceed limits reported by
|
|
driver. Driver may impose additional constraints and may not suspport all
|
|
attributes.
|
|
|
|
|
|
COALESCE_GET
|
|
============
|
|
|
|
Gets coalescing parameters like ``ETHTOOL_GCOALESCE`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_COALESCE_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
=========================================== ====== =======================
|
|
``ETHTOOL_A_COALESCE_HEADER`` nested reply header
|
|
``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx
|
|
``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ
|
|
``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx
|
|
``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ
|
|
``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update
|
|
``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce
|
|
``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce
|
|
``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate
|
|
``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx
|
|
``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx
|
|
``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate
|
|
``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx
|
|
``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
|
|
``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
|
|
``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
|
|
``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
|
|
=========================================== ====== =======================
|
|
|
|
Attributes are only included in reply if their value is not zero or the
|
|
corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e.
|
|
they are declared as supported by driver).
|
|
|
|
Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and
|
|
``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet
|
|
arrival and the various time based delay parameters. By default timers are
|
|
expected to limit the max delay between any packet arrival/departure and a
|
|
corresponding interrupt. In this mode timer should be started by packet
|
|
arrival (sometimes delivery of previous interrupt) and reset when interrupt
|
|
is delivered.
|
|
Setting the appropriate attribute to 1 will enable ``CQE`` mode, where
|
|
each packet event resets the timer. In this mode timer is used to force
|
|
the interrupt if queue goes idle, while busy queues depend on the packet
|
|
limit to trigger interrupts.
|
|
|
|
COALESCE_SET
|
|
============
|
|
|
|
Sets coalescing parameters like ``ETHTOOL_SCOALESCE`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
=========================================== ====== =======================
|
|
``ETHTOOL_A_COALESCE_HEADER`` nested request header
|
|
``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx
|
|
``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ
|
|
``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx
|
|
``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ
|
|
``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update
|
|
``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce
|
|
``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce
|
|
``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate
|
|
``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx
|
|
``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx
|
|
``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate
|
|
``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx
|
|
``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx
|
|
``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
|
|
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
|
|
``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
|
|
``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
|
|
``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
|
|
=========================================== ====== =======================
|
|
|
|
Request is rejected if it attributes declared as unsupported by driver (i.e.
|
|
such that the corresponding bit in ``ethtool_ops::supported_coalesce_params``
|
|
is not set), regardless of their values. Driver may impose additional
|
|
constraints on coalescing parameters and their values.
|
|
|
|
|
|
PAUSE_GET
|
|
=========
|
|
|
|
Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_PAUSE_HEADER`` nested request header
|
|
===================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_PAUSE_HEADER`` nested request header
|
|
``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation
|
|
``ETHTOOL_A_PAUSE_RX`` bool receive pause frames
|
|
``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames
|
|
``ETHTOOL_A_PAUSE_STATS`` nested pause statistics
|
|
===================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set
|
|
in ``ETHTOOL_A_HEADER_FLAGS``.
|
|
It will be empty if driver did not report any statistics. Drivers fill in
|
|
the statistics in the following structure:
|
|
|
|
.. kernel-doc:: include/linux/ethtool.h
|
|
:identifiers: ethtool_pause_stats
|
|
|
|
Each member has a corresponding attribute defined.
|
|
|
|
PAUSE_SET
|
|
=========
|
|
|
|
Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_PAUSE_HEADER`` nested request header
|
|
``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation
|
|
``ETHTOOL_A_PAUSE_RX`` bool receive pause frames
|
|
``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames
|
|
===================================== ====== ==========================
|
|
|
|
|
|
EEE_GET
|
|
=======
|
|
|
|
Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_EEE_HEADER`` nested request header
|
|
===================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_EEE_HEADER`` nested request header
|
|
``ETHTOOL_A_EEE_MODES_OURS`` bool supported/advertised modes
|
|
``ETHTOOL_A_EEE_MODES_PEER`` bool peer advertised link modes
|
|
``ETHTOOL_A_EEE_ACTIVE`` bool EEE is actively used
|
|
``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled
|
|
``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled
|
|
``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us)
|
|
===================================== ====== ==========================
|
|
|
|
In ``ETHTOOL_A_EEE_MODES_OURS``, mask consists of link modes for which EEE is
|
|
enabled, value of link modes for which EEE is advertised. Link modes for which
|
|
peer advertises EEE are listed in ``ETHTOOL_A_EEE_MODES_PEER`` (no mask). The
|
|
netlink interface allows reporting EEE status for all link modes but only
|
|
first 32 are provided by the ``ethtool_ops`` callback.
|
|
|
|
|
|
EEE_SET
|
|
=======
|
|
|
|
Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_EEE_HEADER`` nested request header
|
|
``ETHTOOL_A_EEE_MODES_OURS`` bool advertised modes
|
|
``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled
|
|
``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled
|
|
``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us)
|
|
===================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_EEE_MODES_OURS`` is used to either list link modes to advertise
|
|
EEE for (if there is no mask) or specify changes to the list (if there is
|
|
a mask). The netlink interface allows reporting EEE status for all link modes
|
|
but only first 32 can be set at the moment as that is what the ``ethtool_ops``
|
|
callback supports.
|
|
|
|
|
|
TSINFO_GET
|
|
==========
|
|
|
|
Gets timestamping information like ``ETHTOOL_GET_TS_INFO`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_TSINFO_HEADER`` nested request header
|
|
===================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_TSINFO_HEADER`` nested request header
|
|
``ETHTOOL_A_TSINFO_TIMESTAMPING`` bitset SO_TIMESTAMPING flags
|
|
``ETHTOOL_A_TSINFO_TX_TYPES`` bitset supported Tx types
|
|
``ETHTOOL_A_TSINFO_RX_FILTERS`` bitset supported Rx filters
|
|
``ETHTOOL_A_TSINFO_PHC_INDEX`` u32 PTP hw clock index
|
|
===================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_TSINFO_PHC_INDEX`` is absent if there is no associated PHC (there
|
|
is no special value for this case). The bitset attributes are omitted if they
|
|
would be empty (no bit set).
|
|
|
|
CABLE_TEST
|
|
==========
|
|
|
|
Start a cable test.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_CABLE_TEST_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Notification contents:
|
|
|
|
An Ethernet cable typically contains 1, 2 or 4 pairs. The length of
|
|
the pair can only be measured when there is a fault in the pair and
|
|
hence a reflection. Information about the fault may not be available,
|
|
depending on the specific hardware. Hence the contents of the notify
|
|
message are mostly optional. The attributes can be repeated an
|
|
arbitrary number of times, in an arbitrary order, for an arbitrary
|
|
number of pairs.
|
|
|
|
The example shows the notification sent when the test is completed for
|
|
a T2 cable, i.e. two pairs. One pair is OK and hence has no length
|
|
information. The second pair has a fault and does have length
|
|
information.
|
|
|
|
+---------------------------------------------+--------+---------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_HEADER`` | nested | reply header |
|
|
+---------------------------------------------+--------+---------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_STATUS`` | u8 | completed |
|
|
+---------------------------------------------+--------+---------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_NTF_NEST`` | nested | all the results |
|
|
+-+-------------------------------------------+--------+---------------------+
|
|
| | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test result |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test results |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | ``ETHTOOL_A_CABLE_NEST_FAULT_LENGTH`` | nested | cable length |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`` | u8 | pair number |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM`` | u32 | length in cm |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
|
|
CABLE_TEST TDR
|
|
==============
|
|
|
|
Start a cable test and report raw TDR data
|
|
|
|
Request contents:
|
|
|
|
+--------------------------------------------+--------+-----------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header |
|
|
+--------------------------------------------+--------+-----------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_TDR_CFG`` | nested | test configuration |
|
|
+-+------------------------------------------+--------+-----------------------+
|
|
| | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | first data distance |
|
|
+-+-+----------------------------------------+--------+-----------------------+
|
|
| | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | last data distance |
|
|
+-+-+----------------------------------------+--------+-----------------------+
|
|
| | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step |
|
|
+-+-+----------------------------------------+--------+-----------------------+
|
|
| | ``ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR`` | u8 | pair to test |
|
|
+-+-+----------------------------------------+--------+-----------------------+
|
|
|
|
The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members
|
|
of the nest. All distances are expressed in centimeters. The PHY takes
|
|
the distances as a guide, and rounds to the nearest distance it
|
|
actually supports. If a pair is passed, only that one pair will be
|
|
tested. Otherwise all pairs are tested.
|
|
|
|
Notification contents:
|
|
|
|
Raw TDR data is gathered by sending a pulse down the cable and
|
|
recording the amplitude of the reflected pulse for a given distance.
|
|
|
|
It can take a number of seconds to collect TDR data, especial if the
|
|
full 100 meters is probed at 1 meter intervals. When the test is
|
|
started a notification will be sent containing just
|
|
ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
|
|
ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED.
|
|
|
|
When the test has completed a second notification will be sent
|
|
containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
|
|
ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data.
|
|
|
|
The message may optionally contain the amplitude of the pulse send
|
|
down the cable. This is measured in mV. A reflection should not be
|
|
bigger than transmitted pulse.
|
|
|
|
Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP
|
|
nest containing information about the distance along the cable for the
|
|
first reading, the last reading, and the step between each
|
|
reading. Distances are measured in centimeters. These should be the
|
|
exact values the PHY used. These may be different to what the user
|
|
requested, if the native measurement resolution is greater than 1 cm.
|
|
|
|
For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is
|
|
used to report the amplitude of the reflection for a given pair.
|
|
|
|
+---------------------------------------------+--------+----------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header |
|
|
+---------------------------------------------+--------+----------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_TDR_STATUS`` | u8 | completed |
|
|
+---------------------------------------------+--------+----------------------+
|
|
| ``ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST`` | nested | all the results |
|
|
+-+-------------------------------------------+--------+----------------------+
|
|
| | ``ETHTOOL_A_CABLE_TDR_NEST_PULSE`` | nested | TX Pulse amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_PULSE_mV`` | s16 | Pulse amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | ``ETHTOOL_A_CABLE_NEST_STEP`` | nested | TDR step info |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | First data distance |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | Last data distance |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step|
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
| | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
|
|
+-+-+-----------------------------------------+--------+----------------------+
|
|
|
|
TUNNEL_INFO
|
|
===========
|
|
|
|
Gets information about the tunnel state NIC is aware of.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_TUNNEL_INFO_HEADER`` nested request header
|
|
===================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
+---------------------------------------------+--------+---------------------+
|
|
| ``ETHTOOL_A_TUNNEL_INFO_HEADER`` | nested | reply header |
|
|
+---------------------------------------------+--------+---------------------+
|
|
| ``ETHTOOL_A_TUNNEL_INFO_UDP_PORTS`` | nested | all UDP port tables |
|
|
+-+-------------------------------------------+--------+---------------------+
|
|
| | ``ETHTOOL_A_TUNNEL_UDP_TABLE`` | nested | one UDP port table |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE`` | u32 | max size of the |
|
|
| | | | | table |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` | bitset | tunnel types which |
|
|
| | | | | table can hold |
|
|
+-+-+-----------------------------------------+--------+---------------------+
|
|
| | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY`` | nested | offloaded UDP port |
|
|
+-+-+-+---------------------------------------+--------+---------------------+
|
|
| | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT`` | be16 | UDP port |
|
|
+-+-+-+---------------------------------------+--------+---------------------+
|
|
| | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE`` | u32 | tunnel type |
|
|
+-+-+-+---------------------------------------+--------+---------------------+
|
|
|
|
For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that
|
|
the table contains static entries, hard-coded by the NIC.
|
|
|
|
FEC_GET
|
|
=======
|
|
|
|
Gets FEC configuration and state like ``ETHTOOL_GFECPARAM`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_FEC_HEADER`` nested request header
|
|
===================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_FEC_HEADER`` nested request header
|
|
``ETHTOOL_A_FEC_MODES`` bitset configured modes
|
|
``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection
|
|
``ETHTOOL_A_FEC_ACTIVE`` u32 index of active FEC mode
|
|
``ETHTOOL_A_FEC_STATS`` nested FEC statistics
|
|
===================================== ====== ==========================
|
|
|
|
``ETHTOOL_A_FEC_ACTIVE`` is the bit index of the FEC link mode currently
|
|
active on the interface. This attribute may not be present if device does
|
|
not support FEC.
|
|
|
|
``ETHTOOL_A_FEC_MODES`` and ``ETHTOOL_A_FEC_AUTO`` are only meaningful when
|
|
autonegotiation is disabled. If ``ETHTOOL_A_FEC_AUTO`` is non-zero driver will
|
|
select the FEC mode automatically based on the parameters of the SFP module.
|
|
This is equivalent to the ``ETHTOOL_FEC_AUTO`` bit of the ioctl interface.
|
|
``ETHTOOL_A_FEC_MODES`` carry the current FEC configuration using link mode
|
|
bits (rather than old ``ETHTOOL_FEC_*`` bits).
|
|
|
|
``ETHTOOL_A_FEC_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in
|
|
``ETHTOOL_A_HEADER_FLAGS``.
|
|
Each attribute carries an array of 64bit statistics. First entry in the array
|
|
contains the total number of events on the port, while the following entries
|
|
are counters corresponding to lanes/PCS instances. The number of entries in
|
|
the array will be:
|
|
|
|
+--------------+---------------------------------------------+
|
|
| `0` | device does not support FEC statistics |
|
|
+--------------+---------------------------------------------+
|
|
| `1` | device does not support per-lane break down |
|
|
+--------------+---------------------------------------------+
|
|
| `1 + #lanes` | device has full support for FEC stats |
|
|
+--------------+---------------------------------------------+
|
|
|
|
Drivers fill in the statistics in the following structure:
|
|
|
|
.. kernel-doc:: include/linux/ethtool.h
|
|
:identifiers: ethtool_fec_stats
|
|
|
|
FEC_SET
|
|
=======
|
|
|
|
Sets FEC parameters like ``ETHTOOL_SFECPARAM`` ioctl request.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_FEC_HEADER`` nested request header
|
|
``ETHTOOL_A_FEC_MODES`` bitset configured modes
|
|
``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection
|
|
===================================== ====== ==========================
|
|
|
|
``FEC_SET`` is only meaningful when autonegotiation is disabled. Otherwise
|
|
FEC mode is selected as part of autonegotiation.
|
|
|
|
``ETHTOOL_A_FEC_MODES`` selects which FEC mode should be used. It's recommended
|
|
to set only one bit, if multiple bits are set driver may choose between them
|
|
in an implementation specific way.
|
|
|
|
``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP
|
|
module parameters. This does not mean autonegotiation.
|
|
|
|
MODULE_EEPROM_GET
|
|
=================
|
|
|
|
Fetch module EEPROM data dump.
|
|
This interface is designed to allow dumps of at most 1/2 page at once. This
|
|
means only dumps of 128 (or less) bytes are allowed, without crossing half page
|
|
boundary located at offset 128. For pages other than 0 only high 128 bytes are
|
|
accessible.
|
|
|
|
Request contents:
|
|
|
|
======================================= ====== ==========================
|
|
``ETHTOOL_A_MODULE_EEPROM_HEADER`` nested request header
|
|
``ETHTOOL_A_MODULE_EEPROM_OFFSET`` u32 offset within a page
|
|
``ETHTOOL_A_MODULE_EEPROM_LENGTH`` u32 amount of bytes to read
|
|
``ETHTOOL_A_MODULE_EEPROM_PAGE`` u8 page number
|
|
``ETHTOOL_A_MODULE_EEPROM_BANK`` u8 bank number
|
|
``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`` u8 page I2C address
|
|
======================================= ====== ==========================
|
|
|
|
If ``ETHTOOL_A_MODULE_EEPROM_BANK`` is not specified, bank 0 is assumed.
|
|
|
|
Kernel response contents:
|
|
|
|
+---------------------------------------------+--------+---------------------+
|
|
| ``ETHTOOL_A_MODULE_EEPROM_HEADER`` | nested | reply header |
|
|
+---------------------------------------------+--------+---------------------+
|
|
| ``ETHTOOL_A_MODULE_EEPROM_DATA`` | binary | array of bytes from |
|
|
| | | module EEPROM |
|
|
+---------------------------------------------+--------+---------------------+
|
|
|
|
``ETHTOOL_A_MODULE_EEPROM_DATA`` has an attribute length equal to the amount of
|
|
bytes driver actually read.
|
|
|
|
STATS_GET
|
|
=========
|
|
|
|
Get standard statistics for the interface. Note that this is not
|
|
a re-implementation of ``ETHTOOL_GSTATS`` which exposed driver-defined
|
|
stats.
|
|
|
|
Request contents:
|
|
|
|
======================================= ====== ==========================
|
|
``ETHTOOL_A_STATS_HEADER`` nested request header
|
|
``ETHTOOL_A_STATS_GROUPS`` bitset requested groups of stats
|
|
======================================= ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
+-----------------------------------+--------+--------------------------------+
|
|
| ``ETHTOOL_A_STATS_HEADER`` | nested | reply header |
|
|
+-----------------------------------+--------+--------------------------------+
|
|
| ``ETHTOOL_A_STATS_GRP`` | nested | one or more group of stats |
|
|
+-+---------------------------------+--------+--------------------------------+
|
|
| | ``ETHTOOL_A_STATS_GRP_ID`` | u32 | group ID - ``ETHTOOL_STATS_*`` |
|
|
+-+---------------------------------+--------+--------------------------------+
|
|
| | ``ETHTOOL_A_STATS_GRP_SS_ID`` | u32 | string set ID for names |
|
|
+-+---------------------------------+--------+--------------------------------+
|
|
| | ``ETHTOOL_A_STATS_GRP_STAT`` | nested | nest containing a statistic |
|
|
+-+---------------------------------+--------+--------------------------------+
|
|
| | ``ETHTOOL_A_STATS_GRP_HIST_RX`` | nested | histogram statistic (Rx) |
|
|
+-+---------------------------------+--------+--------------------------------+
|
|
| | ``ETHTOOL_A_STATS_GRP_HIST_TX`` | nested | histogram statistic (Tx) |
|
|
+-+---------------------------------+--------+--------------------------------+
|
|
|
|
Users specify which groups of statistics they are requesting via
|
|
the ``ETHTOOL_A_STATS_GROUPS`` bitset. Currently defined values are:
|
|
|
|
====================== ======== ===============================================
|
|
ETHTOOL_STATS_ETH_MAC eth-mac Basic IEEE 802.3 MAC statistics (30.3.1.1.*)
|
|
ETHTOOL_STATS_ETH_PHY eth-phy Basic IEEE 802.3 PHY statistics (30.3.2.1.*)
|
|
ETHTOOL_STATS_ETH_CTRL eth-ctrl Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*)
|
|
ETHTOOL_STATS_RMON rmon RMON (RFC 2819) statistics
|
|
====================== ======== ===============================================
|
|
|
|
Each group should have a corresponding ``ETHTOOL_A_STATS_GRP`` in the reply.
|
|
``ETHTOOL_A_STATS_GRP_ID`` identifies which group's statistics nest contains.
|
|
``ETHTOOL_A_STATS_GRP_SS_ID`` identifies the string set ID for the names of
|
|
the statistics in the group, if available.
|
|
|
|
Statistics are added to the ``ETHTOOL_A_STATS_GRP`` nest under
|
|
``ETHTOOL_A_STATS_GRP_STAT``. ``ETHTOOL_A_STATS_GRP_STAT`` should contain
|
|
single 8 byte (u64) attribute inside - the type of that attribute is
|
|
the statistic ID and the value is the value of the statistic.
|
|
Each group has its own interpretation of statistic IDs.
|
|
Attribute IDs correspond to strings from the string set identified
|
|
by ``ETHTOOL_A_STATS_GRP_SS_ID``. Complex statistics (such as RMON histogram
|
|
entries) are also listed inside ``ETHTOOL_A_STATS_GRP`` and do not have
|
|
a string defined in the string set.
|
|
|
|
RMON "histogram" counters count number of packets within given size range.
|
|
Because RFC does not specify the ranges beyond the standard 1518 MTU devices
|
|
differ in definition of buckets. For this reason the definition of packet ranges
|
|
is left to each driver.
|
|
|
|
``ETHTOOL_A_STATS_GRP_HIST_RX`` and ``ETHTOOL_A_STATS_GRP_HIST_TX`` nests
|
|
contain the following attributes:
|
|
|
|
================================= ====== ===================================
|
|
ETHTOOL_A_STATS_RMON_HIST_BKT_LOW u32 low bound of the packet size bucket
|
|
ETHTOOL_A_STATS_RMON_HIST_BKT_HI u32 high bound of the bucket
|
|
ETHTOOL_A_STATS_RMON_HIST_VAL u64 packet counter
|
|
================================= ====== ===================================
|
|
|
|
Low and high bounds are inclusive, for example:
|
|
|
|
============================= ==== ====
|
|
RFC statistic low high
|
|
============================= ==== ====
|
|
etherStatsPkts64Octets 0 64
|
|
etherStatsPkts512to1023Octets 512 1023
|
|
============================= ==== ====
|
|
|
|
PHC_VCLOCKS_GET
|
|
===============
|
|
|
|
Query device PHC virtual clocks information.
|
|
|
|
Request contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested request header
|
|
==================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
==================================== ====== ==========================
|
|
``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested reply header
|
|
``ETHTOOL_A_PHC_VCLOCKS_NUM`` u32 PHC virtual clocks number
|
|
``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array
|
|
==================================== ====== ==========================
|
|
|
|
MODULE_GET
|
|
==========
|
|
|
|
Gets transceiver module parameters.
|
|
|
|
Request contents:
|
|
|
|
===================================== ====== ==========================
|
|
``ETHTOOL_A_MODULE_HEADER`` nested request header
|
|
===================================== ====== ==========================
|
|
|
|
Kernel response contents:
|
|
|
|
====================================== ====== ==========================
|
|
``ETHTOOL_A_MODULE_HEADER`` nested reply header
|
|
``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy
|
|
``ETHTOOL_A_MODULE_POWER_MODE`` u8 operational power mode
|
|
====================================== ====== ==========================
|
|
|
|
The optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute encodes the
|
|
transceiver module power mode policy enforced by the host. The default policy
|
|
is driver-dependent, but "auto" is the recommended default and it should be
|
|
implemented by new drivers and drivers where conformance to a legacy behavior
|
|
is not critical.
|
|
|
|
The optional ``ETHTHOOL_A_MODULE_POWER_MODE`` attribute encodes the operational
|
|
power mode policy of the transceiver module. It is only reported when a module
|
|
is plugged-in. Possible values are:
|
|
|
|
.. kernel-doc:: include/uapi/linux/ethtool.h
|
|
:identifiers: ethtool_module_power_mode
|
|
|
|
MODULE_SET
|
|
==========
|
|
|
|
Sets transceiver module parameters.
|
|
|
|
Request contents:
|
|
|
|
====================================== ====== ==========================
|
|
``ETHTOOL_A_MODULE_HEADER`` nested request header
|
|
``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy
|
|
====================================== ====== ==========================
|
|
|
|
When set, the optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute is used
|
|
to set the transceiver module power policy enforced by the host. Possible
|
|
values are:
|
|
|
|
.. kernel-doc:: include/uapi/linux/ethtool.h
|
|
:identifiers: ethtool_module_power_mode_policy
|
|
|
|
For SFF-8636 modules, low power mode is forced by the host according to table
|
|
6-10 in revision 2.10a of the specification.
|
|
|
|
For CMIS modules, low power mode is forced by the host according to table 6-12
|
|
in revision 5.0 of the specification.
|
|
|
|
Request translation
|
|
===================
|
|
|
|
The following table maps ioctl commands to netlink commands providing their
|
|
functionality. Entries with "n/a" in right column are commands which do not
|
|
have their netlink replacement yet. Entries which "n/a" in the left column
|
|
are netlink only.
|
|
|
|
=================================== =====================================
|
|
ioctl command netlink command
|
|
=================================== =====================================
|
|
``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET``
|
|
``ETHTOOL_MSG_LINKMODES_GET``
|
|
``ETHTOOL_SSET`` ``ETHTOOL_MSG_LINKINFO_SET``
|
|
``ETHTOOL_MSG_LINKMODES_SET``
|
|
``ETHTOOL_GDRVINFO`` n/a
|
|
``ETHTOOL_GREGS`` n/a
|
|
``ETHTOOL_GWOL`` ``ETHTOOL_MSG_WOL_GET``
|
|
``ETHTOOL_SWOL`` ``ETHTOOL_MSG_WOL_SET``
|
|
``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET``
|
|
``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET``
|
|
``ETHTOOL_NWAY_RST`` n/a
|
|
``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET``
|
|
``ETHTOOL_GEEPROM`` n/a
|
|
``ETHTOOL_SEEPROM`` n/a
|
|
``ETHTOOL_GCOALESCE`` ``ETHTOOL_MSG_COALESCE_GET``
|
|
``ETHTOOL_SCOALESCE`` ``ETHTOOL_MSG_COALESCE_SET``
|
|
``ETHTOOL_GRINGPARAM`` ``ETHTOOL_MSG_RINGS_GET``
|
|
``ETHTOOL_SRINGPARAM`` ``ETHTOOL_MSG_RINGS_SET``
|
|
``ETHTOOL_GPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_GET``
|
|
``ETHTOOL_SPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_SET``
|
|
``ETHTOOL_GRXCSUM`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_SRXCSUM`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GTXCSUM`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_STXCSUM`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GSG`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_SSG`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_TEST`` n/a
|
|
``ETHTOOL_GSTRINGS`` ``ETHTOOL_MSG_STRSET_GET``
|
|
``ETHTOOL_PHYS_ID`` n/a
|
|
``ETHTOOL_GSTATS`` n/a
|
|
``ETHTOOL_GTSO`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_STSO`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GPERMADDR`` rtnetlink ``RTM_GETLINK``
|
|
``ETHTOOL_GUFO`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_SUFO`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GGSO`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_SGSO`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GFLAGS`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_SFLAGS`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_GET``
|
|
``ETHTOOL_SPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_SET``
|
|
``ETHTOOL_GRXFH`` n/a
|
|
``ETHTOOL_SRXFH`` n/a
|
|
``ETHTOOL_GGRO`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_SGRO`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GRXRINGS`` n/a
|
|
``ETHTOOL_GRXCLSRLCNT`` n/a
|
|
``ETHTOOL_GRXCLSRULE`` n/a
|
|
``ETHTOOL_GRXCLSRLALL`` n/a
|
|
``ETHTOOL_SRXCLSRLDEL`` n/a
|
|
``ETHTOOL_SRXCLSRLINS`` n/a
|
|
``ETHTOOL_FLASHDEV`` n/a
|
|
``ETHTOOL_RESET`` n/a
|
|
``ETHTOOL_SRXNTUPLE`` n/a
|
|
``ETHTOOL_GRXNTUPLE`` n/a
|
|
``ETHTOOL_GSSET_INFO`` ``ETHTOOL_MSG_STRSET_GET``
|
|
``ETHTOOL_GRXFHINDIR`` n/a
|
|
``ETHTOOL_SRXFHINDIR`` n/a
|
|
``ETHTOOL_GFEATURES`` ``ETHTOOL_MSG_FEATURES_GET``
|
|
``ETHTOOL_SFEATURES`` ``ETHTOOL_MSG_FEATURES_SET``
|
|
``ETHTOOL_GCHANNELS`` ``ETHTOOL_MSG_CHANNELS_GET``
|
|
``ETHTOOL_SCHANNELS`` ``ETHTOOL_MSG_CHANNELS_SET``
|
|
``ETHTOOL_SET_DUMP`` n/a
|
|
``ETHTOOL_GET_DUMP_FLAG`` n/a
|
|
``ETHTOOL_GET_DUMP_DATA`` n/a
|
|
``ETHTOOL_GET_TS_INFO`` ``ETHTOOL_MSG_TSINFO_GET``
|
|
``ETHTOOL_GMODULEINFO`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
|
|
``ETHTOOL_GMODULEEEPROM`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
|
|
``ETHTOOL_GEEE`` ``ETHTOOL_MSG_EEE_GET``
|
|
``ETHTOOL_SEEE`` ``ETHTOOL_MSG_EEE_SET``
|
|
``ETHTOOL_GRSSH`` n/a
|
|
``ETHTOOL_SRSSH`` n/a
|
|
``ETHTOOL_GTUNABLE`` n/a
|
|
``ETHTOOL_STUNABLE`` n/a
|
|
``ETHTOOL_GPHYSTATS`` n/a
|
|
``ETHTOOL_PERQUEUE`` n/a
|
|
``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET``
|
|
``ETHTOOL_MSG_LINKMODES_GET``
|
|
``ETHTOOL_SLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_SET``
|
|
``ETHTOOL_MSG_LINKMODES_SET``
|
|
``ETHTOOL_PHY_GTUNABLE`` n/a
|
|
``ETHTOOL_PHY_STUNABLE`` n/a
|
|
``ETHTOOL_GFECPARAM`` ``ETHTOOL_MSG_FEC_GET``
|
|
``ETHTOOL_SFECPARAM`` ``ETHTOOL_MSG_FEC_SET``
|
|
n/a ``ETHTOOL_MSG_CABLE_TEST_ACT``
|
|
n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``
|
|
n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET``
|
|
n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET``
|
|
n/a ``ETHTOOL_MSG_MODULE_GET``
|
|
n/a ``ETHTOOL_MSG_MODULE_SET``
|
|
=================================== =====================================
|