mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-30 16:07:39 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/usb/cdns3/cdnsp-gadget.h
Christophe JAILLET 5df09c15ba usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro 
IMAN_IE is BIT(1), so these macro are respectively equivalent to BIT(1)
and 0, whatever the value of 'p'.

The purpose was to set and reset a single bit in 'p'.
Fix these macros to do that correctly.

Acked-by: Pawel Laszczak <pawell@cadence.com>
Fixes: e93e58d274 ("usb: cdnsp: Device side header file for CDNSP driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d12bfcc9cbffb89e27b120668821b3c4f09b6755.1624390584.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Peter Chen <peter.chen@kernel.org>
2021-07-29 14:28:15 +08:00

1602 lines
53 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Cadence CDNSP DRD Driver.
*
* Copyright (C) 2020 Cadence.
*
* Author: Pawel Laszczak <pawell@cadence.com>
*
* Code based on Linux XHCI driver.
* Origin: Copyright (C) 2008 Intel Corp.
*/
#ifndef __LINUX_CDNSP_GADGET_H
#define __LINUX_CDNSP_GADGET_H
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/usb/gadget.h>
#include <linux/irq.h>
/* Max number slots - only 1 is allowed. */
#define CDNSP_DEV_MAX_SLOTS 1
#define CDNSP_EP0_SETUP_SIZE 512
/* One control and 15 for in and 15 for out endpoints. */
#define CDNSP_ENDPOINTS_NUM 31
/* Best Effort Service Latency. */
#define CDNSP_DEFAULT_BESL 0
/* Device Controller command default timeout value in us */
#define CDNSP_CMD_TIMEOUT (15 * 1000)
/* Up to 16 ms to halt an device controller */
#define CDNSP_MAX_HALT_USEC (16 * 1000)
#define CDNSP_CTX_SIZE 2112
/*
* Controller register interface.
*/
/**
* struct cdnsp_cap_regs - CDNSP Registers.
* @hc_capbase: Length of the capabilities register and controller
* version number
* @hcs_params1: HCSPARAMS1 - Structural Parameters 1
* @hcs_params2: HCSPARAMS2 - Structural Parameters 2
* @hcs_params3: HCSPARAMS3 - Structural Parameters 3
* @hcc_params: HCCPARAMS - Capability Parameters
* @db_off: DBOFF - Doorbell array offset
* @run_regs_off: RTSOFF - Runtime register space offset
* @hcc_params2: HCCPARAMS2 Capability Parameters 2,
*/
struct cdnsp_cap_regs {
__le32 hc_capbase;
__le32 hcs_params1;
__le32 hcs_params2;
__le32 hcs_params3;
__le32 hcc_params;
__le32 db_off;
__le32 run_regs_off;
__le32 hcc_params2;
/* Reserved up to (CAPLENGTH - 0x1C) */
};
/* hc_capbase bitmasks. */
/* bits 7:0 - how long is the Capabilities register. */
#define HC_LENGTH(p) (((p) >> 00) & GENMASK(7, 0))
/* bits 31:16 */
#define HC_VERSION(p) (((p) >> 16) & GENMASK(15, 1))
/* HCSPARAMS1 - hcs_params1 - bitmasks */
/* bits 0:7, Max Device Endpoints */
#define HCS_ENDPOINTS_MASK GENMASK(7, 0)
#define HCS_ENDPOINTS(p) (((p) & HCS_ENDPOINTS_MASK) >> 0)
/* HCCPARAMS offset from PCI base address */
#define HCC_PARAMS_OFFSET 0x10
/* HCCPARAMS - hcc_params - bitmasks */
/* 1: device controller can use 64-bit address pointers. */
#define HCC_64BIT_ADDR(p) ((p) & BIT(0))
/* 1: device controller uses 64-byte Device Context structures. */
#define HCC_64BYTE_CONTEXT(p) ((p) & BIT(2))
/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */
#define HCC_MAX_PSA(p) ((((p) >> 12) & 0xf) + 1)
/* Extended Capabilities pointer from PCI base. */
#define HCC_EXT_CAPS(p) (((p) & GENMASK(31, 16)) >> 16)
#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
/* db_off bitmask - bits 0:1 reserved. */
#define DBOFF_MASK GENMASK(31, 2)
/* run_regs_off bitmask - bits 0:4 reserved. */
#define RTSOFF_MASK GENMASK(31, 5)
/**
* struct cdnsp_op_regs - Device Controller Operational Registers.
* @command: USBCMD - Controller command register.
* @status: USBSTS - Controller status register.
* @page_size: This indicates the page size that the device controller supports.
* If bit n is set, the controller supports a page size of 2^(n+12),
* up to a 128MB page size. 4K is the minimum page size.
* @dnctrl: DNCTRL - Device notification control register.
* @cmd_ring: CRP - 64-bit Command Ring Pointer.
* @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer.
* @config_reg: CONFIG - Configure Register
* @port_reg_base: PORTSCn - base address for Port Status and Control
* Each port has a Port Status and Control register,
* followed by a Port Power Management Status and Control
* register, a Port Link Info register, and a reserved
* register.
*/
struct cdnsp_op_regs {
__le32 command;
__le32 status;
__le32 page_size;
__le32 reserved1;
__le32 reserved2;
__le32 dnctrl;
__le64 cmd_ring;
/* rsvd: offset 0x20-2F. */
__le32 reserved3[4];
__le64 dcbaa_ptr;
__le32 config_reg;
/* rsvd: offset 0x3C-3FF. */
__le32 reserved4[241];
/* port 1 registers, which serve as a base address for other ports. */
__le32 port_reg_base;
};
/* Number of registers per port. */
#define NUM_PORT_REGS 4
/**
* struct cdnsp_port_regs - Port Registers.
* @portsc: PORTSC - Port Status and Control Register.
* @portpmsc: PORTPMSC - Port Power Managements Status and Control Register.
* @portli: PORTLI - Port Link Info register.
*/
struct cdnsp_port_regs {
__le32 portsc;
__le32 portpmsc;
__le32 portli;
__le32 reserved;
};
/*
* These bits are Read Only (RO) and should be saved and written to the
* registers: 0 (connect status) and 10:13 (port speed).
* These bits are also sticky - meaning they're in the AUX well and they aren't
* changed by a hot and warm.
*/
#define CDNSP_PORT_RO (PORT_CONNECT | DEV_SPEED_MASK)
/*
* These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
* bits 5:8 (link state), 25:26 ("wake on" enable state)
*/
#define CDNSP_PORT_RWS (PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E)
/*
* These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
* bits 1 (port enable/disable), 17 ( connect changed),
* 21 (port reset changed) , 22 (Port Link State Change),
*/
#define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC)
/* USBCMD - USB command - bitmasks. */
/* Run/Stop, controller execution - do not write unless controller is halted.*/
#define CMD_R_S BIT(0)
/*
* Reset device controller - resets internal controller state machine and all
* registers (except PCI config regs).
*/
#define CMD_RESET BIT(1)
/* Event Interrupt Enable - a '1' allows interrupts from the controller. */
#define CMD_INTE BIT(2)
/*
* Device System Error Interrupt Enable - get out-of-band signal for
* controller errors.
*/
#define CMD_DSEIE BIT(3)
/* device controller save/restore state. */
#define CMD_CSS BIT(8)
#define CMD_CRS BIT(9)
/*
* Enable Wrap Event - '1' means device controller generates an event
* when MFINDEX wraps.
*/
#define CMD_EWE BIT(10)
/* 1: device enabled */
#define CMD_DEVEN BIT(17)
/* bits 18:31 are reserved (and should be preserved on writes). */
/* Command register values to disable interrupts. */
#define CDNSP_IRQS (CMD_INTE | CMD_DSEIE | CMD_EWE)
/* USBSTS - USB status - bitmasks */
/* controller not running - set to 1 when run/stop bit is cleared. */
#define STS_HALT BIT(0)
/*
* serious error, e.g. PCI parity error. The controller will clear
* the run/stop bit.
*/
#define STS_FATAL BIT(2)
/* event interrupt - clear this prior to clearing any IP flags in IR set.*/
#define STS_EINT BIT(3)
/* port change detect */
#define STS_PCD BIT(4)
/* save state status - '1' means device controller is saving state. */
#define STS_SSS BIT(8)
/* restore state status - '1' means controllers is restoring state. */
#define STS_RSS BIT(9)
/* 1: save or restore error */
#define STS_SRE BIT(10)
/* 1: device Not Ready to accept doorbell or op reg writes after reset. */
#define STS_CNR BIT(11)
/* 1: internal Device Controller Error.*/
#define STS_HCE BIT(12)
/* CRCR - Command Ring Control Register - cmd_ring bitmasks. */
/* bit 0 is the command ring cycle state. */
#define CMD_RING_CS BIT(0)
/* stop ring immediately - abort the currently executing command. */
#define CMD_RING_ABORT BIT(2)
/*
* Command Ring Busy.
* Set when Doorbell register is written with DB for command and cleared when
* the controller reached end of CR.
*/
#define CMD_RING_BUSY(p) ((p) & BIT(4))
/* 1: command ring is running */
#define CMD_RING_RUNNING BIT(3)
/* Command Ring pointer - bit mask for the lower 32 bits. */
#define CMD_RING_RSVD_BITS GENMASK(5, 0)
/* CONFIG - Configure Register - config_reg bitmasks. */
/* bits 0:7 - maximum number of device slots enabled. */
#define MAX_DEVS GENMASK(7, 0)
/* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */
#define CONFIG_U3E BIT(8)
/* PORTSC - Port Status and Control Register - port_reg_base bitmasks */
/* 1: device connected. */
#define PORT_CONNECT BIT(0)
/* 1: port enabled. */
#define PORT_PED BIT(1)
/* 1: port reset signaling asserted. */
#define PORT_RESET BIT(4)
/*
* Port Link State - bits 5:8
* A read gives the current link PM state of the port,
* a write with Link State Write Strobe sets the link state.
*/
#define PORT_PLS_MASK GENMASK(8, 5)
#define XDEV_U0 (0x0 << 5)
#define XDEV_U1 (0x1 << 5)
#define XDEV_U2 (0x2 << 5)
#define XDEV_U3 (0x3 << 5)
#define XDEV_DISABLED (0x4 << 5)
#define XDEV_RXDETECT (0x5 << 5)
#define XDEV_INACTIVE (0x6 << 5)
#define XDEV_POLLING (0x7 << 5)
#define XDEV_RECOVERY (0x8 << 5)
#define XDEV_HOT_RESET (0x9 << 5)
#define XDEV_COMP_MODE (0xa << 5)
#define XDEV_TEST_MODE (0xb << 5)
#define XDEV_RESUME (0xf << 5)
/* 1: port has power. */
#define PORT_POWER BIT(9)
/*
* bits 10:13 indicate device speed:
* 0 - undefined speed - port hasn't be initialized by a reset yet
* 1 - full speed
* 2 - Reserved (Low Speed not supported
* 3 - high speed
* 4 - super speed
* 5 - super speed
* 6-15 reserved
*/
#define DEV_SPEED_MASK GENMASK(13, 10)
#define XDEV_FS (0x1 << 10)
#define XDEV_HS (0x3 << 10)
#define XDEV_SS (0x4 << 10)
#define XDEV_SSP (0x5 << 10)
#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0 << 10))
#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP)
#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS)
#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f)
/* Port Link State Write Strobe - set this when changing link state */
#define PORT_LINK_STROBE BIT(16)
/* 1: connect status change */
#define PORT_CSC BIT(17)
/* 1: warm reset for a USB 3.0 device is done. */
#define PORT_WRC BIT(19)
/* 1: reset change - 1 to 0 transition of PORT_RESET */
#define PORT_RC BIT(21)
/*
* port link status change - set on some port link state transitions:
* Transition Reason
* ----------------------------------------------------------------------------
* - U3 to Resume Wakeup signaling from a device
* - Resume to Recovery to U0 USB 3.0 device resume
* - Resume to U0 USB 2.0 device resume
* - U3 to Recovery to U0 Software resume of USB 3.0 device complete
* - U3 to U0 Software resume of USB 2.0 device complete
* - U2 to U0 L1 resume of USB 2.1 device complete
* - U0 to U0 L1 entry rejection by USB 2.1 device
* - U0 to disabled L1 entry error with USB 2.1 device
* - Any state to inactive Error on USB 3.0 port
*/
#define PORT_PLC BIT(22)
/* Port configure error change - port failed to configure its link partner. */
#define PORT_CEC BIT(23)
/* Wake on connect (enable). */
#define PORT_WKCONN_E BIT(25)
/* Wake on disconnect (enable). */
#define PORT_WKDISC_E BIT(26)
/* Indicates if Warm Reset is being received. */
#define PORT_WR BIT(31)
#define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC)
/* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */
/* Enables U1 entry. */
#define PORT_U1_TIMEOUT_MASK GENMASK(7, 0)
#define PORT_U1_TIMEOUT(p) ((p) & PORT_U1_TIMEOUT_MASK)
/* Enables U2 entry .*/
#define PORT_U2_TIMEOUT_MASK GENMASK(14, 8)
#define PORT_U2_TIMEOUT(p) (((p) << 8) & PORT_U2_TIMEOUT_MASK)
/* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */
#define PORT_L1S_MASK GENMASK(2, 0)
#define PORT_L1S(p) ((p) & PORT_L1S_MASK)
#define PORT_L1S_ACK PORT_L1S(1)
#define PORT_L1S_NYET PORT_L1S(2)
#define PORT_L1S_STALL PORT_L1S(3)
#define PORT_L1S_TIMEOUT PORT_L1S(4)
/* Remote Wake Enable. */
#define PORT_RWE BIT(3)
/* Best Effort Service Latency (BESL). */
#define PORT_BESL(p) (((p) << 4) & GENMASK(7, 4))
/* Hardware LPM Enable (HLE). */
#define PORT_HLE BIT(16)
/* Received Best Effort Service Latency (BESL). */
#define PORT_RRBESL(p) (((p) & GENMASK(20, 17)) >> 17)
/* Port Test Control. */
#define PORT_TEST_MODE_MASK GENMASK(31, 28)
#define PORT_TEST_MODE(p) (((p) << 28) & PORT_TEST_MODE_MASK)
/**
* struct cdnsp_intr_reg - Interrupt Register Set.
* @irq_pending: IMAN - Interrupt Management Register. Used to enable
* interrupts and check for pending interrupts.
* @irq_control: IMOD - Interrupt Moderation Register.
* Used to throttle interrupts.
* @erst_size: Number of segments in the Event Ring Segment Table (ERST).
* @erst_base: ERST base address.
* @erst_dequeue: Event ring dequeue pointer.
*
* Each interrupter (defined by a MSI-X vector) has an event ring and an Event
* Ring Segment Table (ERST) associated with it. The event ring is comprised of
* multiple segments of the same size. The controller places events on the ring
* and "updates the Cycle bit in the TRBs to indicate to software the current
* position of the Enqueue Pointer." The driver processes those events and
* updates the dequeue pointer.
*/
struct cdnsp_intr_reg {
__le32 irq_pending;
__le32 irq_control;
__le32 erst_size;
__le32 rsvd;
__le64 erst_base;
__le64 erst_dequeue;
};
/* IMAN - Interrupt Management Register - irq_pending bitmasks l. */
#define IMAN_IE BIT(1)
#define IMAN_IP BIT(0)
/* bits 2:31 need to be preserved */
#define IMAN_IE_SET(p) ((p) | IMAN_IE)
#define IMAN_IE_CLEAR(p) ((p) & ~IMAN_IE)
/* IMOD - Interrupter Moderation Register - irq_control bitmasks. */
/*
* Minimum interval between interrupts (in 250ns intervals). The interval
* between interrupts will be longer if there are no events on the event ring.
* Default is 4000 (1 ms).
*/
#define IMOD_INTERVAL_MASK GENMASK(15, 0)
/* Counter used to count down the time to the next interrupt - HW use only */
#define IMOD_COUNTER_MASK GENMASK(31, 16)
#define IMOD_DEFAULT_INTERVAL 0
/* erst_size bitmasks. */
/* Preserve bits 16:31 of erst_size. */
#define ERST_SIZE_MASK GENMASK(31, 16)
/* erst_dequeue bitmasks. */
/*
* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
* where the current dequeue pointer lies. This is an optional HW hint.
*/
#define ERST_DESI_MASK GENMASK(2, 0)
/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */
#define ERST_EHB BIT(3)
#define ERST_PTR_MASK GENMASK(3, 0)
/**
* struct cdnsp_run_regs
* @microframe_index: MFINDEX - current microframe number.
* @ir_set: Array of Interrupter registers.
*
* Device Controller Runtime Registers:
* "Software should read and write these registers using only Dword (32 bit)
* or larger accesses"
*/
struct cdnsp_run_regs {
__le32 microframe_index;
__le32 rsvd[7];
struct cdnsp_intr_reg ir_set[128];
};
/**
* USB2.0 Port Peripheral Configuration Registers.
* @ext_cap: Header register for Extended Capability.
* @port_reg1: Timer Configuration Register.
* @port_reg2: Timer Configuration Register.
* @port_reg3: Timer Configuration Register.
* @port_reg4: Timer Configuration Register.
* @port_reg5: Timer Configuration Register.
* @port_reg6: Chicken bits for USB20PPP.
*/
struct cdnsp_20port_cap {
__le32 ext_cap;
__le32 port_reg1;
__le32 port_reg2;
__le32 port_reg3;
__le32 port_reg4;
__le32 port_reg5;
__le32 port_reg6;
};
/* Extended capability register fields */
#define EXT_CAPS_ID(p) (((p) >> 0) & GENMASK(7, 0))
#define EXT_CAPS_NEXT(p) (((p) >> 8) & GENMASK(7, 0))
/* Extended capability IDs - ID 0 reserved */
#define EXT_CAPS_PROTOCOL 2
/* USB 2.0 Port Peripheral Configuration Extended Capability */
#define EXT_CAP_CFG_DEV_20PORT_CAP_ID 0xC1
/*
* Setting this bit to '1' enables automatic wakeup from L1 state on transfer
* TRB prepared when USBSSP operates in USB2.0 mode.
*/
#define PORT_REG6_L1_L0_HW_EN BIT(1)
/*
* Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0
* mode (disables High Speed).
*/
#define PORT_REG6_FORCE_FS BIT(0)
/**
* USB3.x Port Peripheral Configuration Registers.
* @ext_cap: Header register for Extended Capability.
* @mode_addr: Miscellaneous 3xPORT operation mode configuration register.
* @mode_2: 3x Port Control Register 2.
*/
struct cdnsp_3xport_cap {
__le32 ext_cap;
__le32 mode_addr;
__le32 reserved[52];
__le32 mode_2;
};
/* Extended Capability Header for 3XPort Configuration Registers. */
#define D_XEC_CFG_3XPORT_CAP 0xC0
#define CFG_3XPORT_SSP_SUPPORT BIT(31)
#define CFG_3XPORT_U1_PIPE_CLK_GATE_EN BIT(0)
/* Revision Extended Capability ID */
#define RTL_REV_CAP 0xC4
#define RTL_REV_CAP_RX_BUFF_CMD_SIZE BITMASK(31, 24)
#define RTL_REV_CAP_RX_BUFF_SIZE BITMASK(15, 0)
#define RTL_REV_CAP_TX_BUFF_CMD_SIZE BITMASK(31, 24)
#define RTL_REV_CAP_TX_BUFF_SIZE BITMASK(15, 0)
#define CDNSP_VER_1 0x00000000
#define CDNSP_VER_2 0x10000000
#define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) \
(readl(&(pdev)->rev_cap->ep_supported) & \
(BIT(ep_num) << ((dir) ? 0 : 16)))
/**
* struct cdnsp_rev_cap - controller capabilities.
* @ext_cap: Header for RTL Revision Extended Capability.
* @rtl_revision: RTL revision.
* @rx_buff_size: Rx buffer sizes.
* @tx_buff_size: Tx buffer sizes.
* @ep_supported: Supported endpoints.
* @ctrl_revision: Controller revision ID.
*/
struct cdnsp_rev_cap {
__le32 ext_cap;
__le32 rtl_revision;
__le32 rx_buff_size;
__le32 tx_buff_size;
__le32 ep_supported;
__le32 ctrl_revision;
};
/* USB2.0 Port Peripheral Configuration Registers. */
#define D_XEC_PRE_REGS_CAP 0xC8
#define REG_CHICKEN_BITS_2_OFFSET 0x48
#define CHICKEN_XDMA_2_TP_CACHE_DIS BIT(28)
/* XBUF Extended Capability ID. */
#define XBUF_CAP_ID 0xCB
#define XBUF_RX_TAG_MASK_0_OFFSET 0x1C
#define XBUF_RX_TAG_MASK_1_OFFSET 0x24
#define XBUF_TX_CMD_OFFSET 0x2C
/**
* struct cdnsp_doorbell_array.
* @cmd_db: Command ring doorbell register.
* @ep_db: Endpoint ring doorbell register.
* Bits 0 - 7: Endpoint target.
* Bits 8 - 15: RsvdZ.
* Bits 16 - 31: Stream ID.
*/
struct cdnsp_doorbell_array {
__le32 cmd_db;
__le32 ep_db;
};
#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
#define DB_VALUE_EP0_OUT(ep, stream) ((ep) & 0xff)
#define DB_VALUE_CMD 0x00000000
/**
* struct cdnsp_container_ctx.
* @type: Type of context. Used to calculated offsets to contained contexts.
* @size: Size of the context data.
* @ctx_size: context data structure size - 64 or 32 bits.
* @dma: dma address of the bytes.
* @bytes: The raw context data given to HW.
*
* Represents either a Device or Input context. Holds a pointer to the raw
* memory used for the context (bytes) and dma address of it (dma).
*/
struct cdnsp_container_ctx {
unsigned int type;
#define CDNSP_CTX_TYPE_DEVICE 0x1
#define CDNSP_CTX_TYPE_INPUT 0x2
int size;
int ctx_size;
dma_addr_t dma;
u8 *bytes;
};
/**
* struct cdnsp_slot_ctx
* @dev_info: Device speed, and last valid endpoint.
* @dev_port: Device port number that is needed to access the USB device.
* @int_target: Interrupter target number.
* @dev_state: Slot state and device address.
*
* Slot Context - This assumes the controller uses 32-byte context
* structures. If the controller uses 64-byte contexts, there is an additional
* 32 bytes reserved at the end of the slot context for controller internal use.
*/
struct cdnsp_slot_ctx {
__le32 dev_info;
__le32 dev_port;
__le32 int_target;
__le32 dev_state;
/* offset 0x10 to 0x1f reserved for controller internal use. */
__le32 reserved[4];
};
/* Bits 20:23 in the Slot Context are the speed for the device. */
#define SLOT_SPEED_FS (XDEV_FS << 10)
#define SLOT_SPEED_HS (XDEV_HS << 10)
#define SLOT_SPEED_SS (XDEV_SS << 10)
#define SLOT_SPEED_SSP (XDEV_SSP << 10)
/* dev_info bitmasks. */
/* Device speed - values defined by PORTSC Device Speed field - 20:23. */
#define DEV_SPEED GENMASK(23, 20)
#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20)
/* Index of the last valid endpoint context in this device context - 27:31. */
#define LAST_CTX_MASK ((unsigned int)GENMASK(31, 27))
#define LAST_CTX(p) ((p) << 27)
#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
#define SLOT_FLAG BIT(0)
#define EP0_FLAG BIT(1)
/* dev_port bitmasks */
/* Device port number that is needed to access the USB device. */
#define DEV_PORT(p) (((p) & 0xff) << 16)
/* dev_state bitmasks */
/* USB device address - assigned by the controller. */
#define DEV_ADDR_MASK GENMASK(7, 0)
/* Slot state */
#define SLOT_STATE GENMASK(31, 27)
#define GET_SLOT_STATE(p) (((p) & SLOT_STATE) >> 27)
#define SLOT_STATE_DISABLED 0
#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
#define SLOT_STATE_DEFAULT 1
#define SLOT_STATE_ADDRESSED 2
#define SLOT_STATE_CONFIGURED 3
/**
* struct cdnsp_ep_ctx.
* @ep_info: Endpoint state, streams, mult, and interval information.
* @ep_info2: Information on endpoint type, max packet size, max burst size,
* error count, and whether the controller will force an event for
* all transactions.
* @deq: 64-bit ring dequeue pointer address. If the endpoint only
* defines one stream, this points to the endpoint transfer ring.
* Otherwise, it points to a stream context array, which has a
* ring pointer for each flow.
* @tx_info: Average TRB lengths for the endpoint ring and
* max payload within an Endpoint Service Interval Time (ESIT).
*
* Endpoint Context - This assumes the controller uses 32-byte context
* structures. If the controller uses 64-byte contexts, there is an additional
* 32 bytes reserved at the end of the endpoint context for controller internal
* use.
*/
struct cdnsp_ep_ctx {
__le32 ep_info;
__le32 ep_info2;
__le64 deq;
__le32 tx_info;
/* offset 0x14 - 0x1f reserved for controller internal use. */
__le32 reserved[3];
};
/* ep_info bitmasks. */
/*
* Endpoint State - bits 0:2:
* 0 - disabled
* 1 - running
* 2 - halted due to halt condition
* 3 - stopped
* 4 - TRB error
* 5-7 - reserved
*/
#define EP_STATE_MASK GENMASK(3, 0)
#define EP_STATE_DISABLED 0
#define EP_STATE_RUNNING 1
#define EP_STATE_HALTED 2
#define EP_STATE_STOPPED 3
#define EP_STATE_ERROR 4
#define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
/* Mult - Max number of burst within an interval, in EP companion desc. */
#define EP_MULT(p) (((p) << 8) & GENMASK(9, 8))
#define CTX_TO_EP_MULT(p) (((p) & GENMASK(9, 8)) >> 8)
/* bits 10:14 are Max Primary Streams. */
/* bit 15 is Linear Stream Array. */
/* Interval - period between requests to an endpoint - 125u increments. */
#define EP_INTERVAL(p) (((p) << 16) & GENMASK(23, 16))
#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) & GENMASK(23, 16)) >> 16))
#define CTX_TO_EP_INTERVAL(p) (((p) & GENMASK(23, 16)) >> 16)
#define EP_MAXPSTREAMS_MASK GENMASK(14, 10)
#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
#define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10)
/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
#define EP_HAS_LSA BIT(15)
/* ep_info2 bitmasks */
#define ERROR_COUNT(p) (((p) & 0x3) << 1)
#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
#define EP_TYPE(p) ((p) << 3)
#define ISOC_OUT_EP 1
#define BULK_OUT_EP 2
#define INT_OUT_EP 3
#define CTRL_EP 4
#define ISOC_IN_EP 5
#define BULK_IN_EP 6
#define INT_IN_EP 7
/* bit 6 reserved. */
/* bit 7 is Device Initiate Disable - for disabling stream selection. */
#define MAX_BURST(p) (((p) << 8) & GENMASK(15, 8))
#define CTX_TO_MAX_BURST(p) (((p) & GENMASK(15, 8)) >> 8)
#define MAX_PACKET(p) (((p) << 16) & GENMASK(31, 16))
#define MAX_PACKET_MASK GENMASK(31, 16)
#define MAX_PACKET_DECODED(p) (((p) & GENMASK(31, 16)) >> 16)
/* tx_info bitmasks. */
#define EP_AVG_TRB_LENGTH(p) ((p) & GENMASK(15, 0))
#define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) << 16) & GENMASK(31, 16))
#define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) & GENMASK(23, 16)) >> 16) << 24)
#define CTX_TO_MAX_ESIT_PAYLOAD_LO(p) (((p) & GENMASK(31, 16)) >> 16)
#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) & GENMASK(31, 24)) >> 24)
/* deq bitmasks. */
#define EP_CTX_CYCLE_MASK BIT(0)
#define CTX_DEQ_MASK (~0xfL)
/**
* struct cdnsp_input_control_context
* Input control context;
*
* @drop_context: Set the bit of the endpoint context you want to disable.
* @add_context: Set the bit of the endpoint context you want to enable.
*/
struct cdnsp_input_control_ctx {
__le32 drop_flags;
__le32 add_flags;
__le32 rsvd2[6];
};
/**
* Represents everything that is needed to issue a command on the command ring.
*
* @in_ctx: Pointer to input context structure.
* @status: Command Completion Code for last command.
* @command_trb: Pointer to command TRB.
*/
struct cdnsp_command {
/* Input context for changing device state. */
struct cdnsp_container_ctx *in_ctx;
u32 status;
union cdnsp_trb *command_trb;
};
/**
* Stream context structure.
*
* @stream_ring: 64-bit stream ring address, cycle state, and stream type.
* @reserved: offset 0x14 - 0x1f reserved for controller internal use.
*/
struct cdnsp_stream_ctx {
__le64 stream_ring;
__le32 reserved[2];
};
/* Stream Context Types - bits 3:1 of stream ctx deq ptr. */
#define SCT_FOR_CTX(p) (((p) << 1) & GENMASK(3, 1))
/* Secondary stream array type, dequeue pointer is to a transfer ring. */
#define SCT_SEC_TR 0
/* Primary stream array type, dequeue pointer is to a transfer ring. */
#define SCT_PRI_TR 1
/**
* struct cdnsp_stream_info: Representing everything that is needed to
* supports stream capable endpoints.
* @stream_rings: Array of pointers containing Transfer rings for all
* supported streams.
* @num_streams: Number of streams, including stream 0.
* @stream_ctx_array: The stream context array may be bigger than the number
* of streams the driver asked for.
* @num_stream_ctxs: Number of streams.
* @ctx_array_dma: Dma address of Context Stream Array.
* @trb_address_map: For mapping physical TRB addresses to segments in
* stream rings.
* @td_count: Number of TDs associated with endpoint.
* @first_prime_det: First PRIME packet detected.
* @drbls_count: Number of allowed doorbells.
*/
struct cdnsp_stream_info {
struct cdnsp_ring **stream_rings;
unsigned int num_streams;
struct cdnsp_stream_ctx *stream_ctx_array;
unsigned int num_stream_ctxs;
dma_addr_t ctx_array_dma;
struct radix_tree_root trb_address_map;
int td_count;
u8 first_prime_det;
#define STREAM_DRBL_FIFO_DEPTH 2
u8 drbls_count;
};
#define STREAM_LOG_STREAMS 4
#define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS)
#if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1
#error "Not suupported stream value"
#endif
/**
* struct cdnsp_ep - extended device side representation of USB endpoint.
* @endpoint: usb endpoint
* @pending_req_list: List of requests queuing on transfer ring.
* @pdev: Device associated with this endpoint.
* @number: Endpoint number (1 - 15).
* idx: The device context index (DCI).
* interval: Interval between packets used for ISOC endpoint.
* @name: A human readable name e.g. ep1out.
* @direction: Endpoint direction.
* @buffering: Number of on-chip buffers related to endpoint.
* @buffering_period; Number of on-chip buffers related to periodic endpoint.
* @in_ctx: Pointer to input endpoint context structure.
* @out_ctx: Pointer to output endpoint context structure.
* @ring: Pointer to transfer ring.
* @stream_info: Hold stream information.
* @ep_state: Current state of endpoint.
* @skip: Sometimes the controller can not process isochronous endpoint ring
* quickly enough, and it will miss some isoc tds on the ring and
* generate Missed Service Error Event.
* Set skip flag when receive a Missed Service Error Event and
* process the missed tds on the endpoint ring.
*/
struct cdnsp_ep {
struct usb_ep endpoint;
struct list_head pending_list;
struct cdnsp_device *pdev;
u8 number;
u8 idx;
u32 interval;
char name[20];
u8 direction;
u8 buffering;
u8 buffering_period;
struct cdnsp_ep_ctx *in_ctx;
struct cdnsp_ep_ctx *out_ctx;
struct cdnsp_ring *ring;
struct cdnsp_stream_info stream_info;
unsigned int ep_state;
#define EP_ENABLED BIT(0)
#define EP_DIS_IN_RROGRESS BIT(1)
#define EP_HALTED BIT(2)
#define EP_STOPPED BIT(3)
#define EP_WEDGE BIT(4)
#define EP0_HALTED_STATUS BIT(5)
#define EP_HAS_STREAMS BIT(6)
#define EP_UNCONFIGURED BIT(7)
bool skip;
};
/**
* struct cdnsp_device_context_array
* @dev_context_ptr: Array of 64-bit DMA addresses for device contexts.
* @dma: DMA address for device contexts structure.
*/
struct cdnsp_device_context_array {
__le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1];
dma_addr_t dma;
};
/**
* struct cdnsp_transfer_event.
* @buffer: 64-bit buffer address, or immediate data.
* @transfer_len: Data length transferred.
* @flags: Field is interpreted differently based on the type of TRB.
*/
struct cdnsp_transfer_event {
__le64 buffer;
__le32 transfer_len;
__le32 flags;
};
/* Invalidate event after disabling endpoint. */
#define TRB_EVENT_INVALIDATE 8
/* Transfer event TRB length bit mask. */
/* bits 0:23 */
#define EVENT_TRB_LEN(p) ((p) & GENMASK(23, 0))
/* Completion Code - only applicable for some types of TRBs */
#define COMP_CODE_MASK (0xff << 24)
#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
#define COMP_INVALID 0
#define COMP_SUCCESS 1
#define COMP_DATA_BUFFER_ERROR 2
#define COMP_BABBLE_DETECTED_ERROR 3
#define COMP_TRB_ERROR 5
#define COMP_RESOURCE_ERROR 7
#define COMP_NO_SLOTS_AVAILABLE_ERROR 9
#define COMP_INVALID_STREAM_TYPE_ERROR 10
#define COMP_SLOT_NOT_ENABLED_ERROR 11
#define COMP_ENDPOINT_NOT_ENABLED_ERROR 12
#define COMP_SHORT_PACKET 13
#define COMP_RING_UNDERRUN 14
#define COMP_RING_OVERRUN 15
#define COMP_VF_EVENT_RING_FULL_ERROR 16
#define COMP_PARAMETER_ERROR 17
#define COMP_CONTEXT_STATE_ERROR 19
#define COMP_EVENT_RING_FULL_ERROR 21
#define COMP_INCOMPATIBLE_DEVICE_ERROR 22
#define COMP_MISSED_SERVICE_ERROR 23
#define COMP_COMMAND_RING_STOPPED 24
#define COMP_COMMAND_ABORTED 25
#define COMP_STOPPED 26
#define COMP_STOPPED_LENGTH_INVALID 27
#define COMP_STOPPED_SHORT_PACKET 28
#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29
#define COMP_ISOCH_BUFFER_OVERRUN 31
#define COMP_EVENT_LOST_ERROR 32
#define COMP_UNDEFINED_ERROR 33
#define COMP_INVALID_STREAM_ID_ERROR 34
/*Transfer Event NRDY bit fields */
#define TRB_TO_DEV_STREAM(p) ((p) & GENMASK(16, 0))
#define TRB_TO_HOST_STREAM(p) ((p) & GENMASK(16, 0))
#define STREAM_PRIME_ACK 0xFFFE
#define STREAM_REJECTED 0xFFFF
/** Transfer Event bit fields **/
#define TRB_TO_EP_ID(p) (((p) & GENMASK(20, 16)) >> 16)
/**
* struct cdnsp_link_trb
* @segment_ptr: 64-bit segment pointer.
* @intr_target: Interrupter target.
* @control: Flags.
*/
struct cdnsp_link_trb {
__le64 segment_ptr;
__le32 intr_target;
__le32 control;
};
/* control bitfields */
#define LINK_TOGGLE BIT(1)
/**
* struct cdnsp_event_cmd - Command completion event TRB.
* cmd_trb: Pointer to command TRB, or the value passed by the event data trb
* status: Command completion parameters and error code.
* flags: Flags.
*/
struct cdnsp_event_cmd {
__le64 cmd_trb;
__le32 status;
__le32 flags;
};
/* flags bitmasks */
/* Address device - disable SetAddress. */
#define TRB_BSR BIT(9)
/* Configure Endpoint - Deconfigure. */
#define TRB_DC BIT(9)
/* Force Header */
#define TRB_FH_TO_PACKET_TYPE(p) ((p) & GENMASK(4, 0))
#define TRB_FH_TR_PACKET 0x4
#define TRB_FH_TO_DEVICE_ADDRESS(p) (((p) << 25) & GENMASK(31, 25))
#define TRB_FH_TR_PACKET_DEV_NOT 0x6
#define TRB_FH_TO_NOT_TYPE(p) (((p) << 4) & GENMASK(7, 4))
#define TRB_FH_TR_PACKET_FUNCTION_WAKE 0x1
#define TRB_FH_TO_INTERFACE(p) (((p) << 8) & GENMASK(15, 8))
enum cdnsp_setup_dev {
SETUP_CONTEXT_ONLY,
SETUP_CONTEXT_ADDRESS,
};
/* bits 24:31 are the slot ID. */
#define TRB_TO_SLOT_ID(p) (((p) & GENMASK(31, 24)) >> 24)
#define SLOT_ID_FOR_TRB(p) (((p) << 24) & GENMASK(31, 24))
/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */
#define TRB_TO_EP_INDEX(p) (((p) >> 16) & 0x1f)
#define EP_ID_FOR_TRB(p) ((((p) + 1) << 16) & GENMASK(20, 16))
#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
#define TRB_TO_SUSPEND_PORT(p) (((p) >> 23) & 0x1)
#define LAST_EP_INDEX 30
/* Set TR Dequeue Pointer command TRB fields. */
#define TRB_TO_STREAM_ID(p) ((((p) & GENMASK(31, 16)) >> 16))
#define STREAM_ID_FOR_TRB(p) ((((p)) << 16) & GENMASK(31, 16))
#define SCT_FOR_TRB(p) (((p) << 1) & 0x7)
/* Link TRB specific fields. */
#define TRB_TC BIT(1)
/* Port Status Change Event TRB fields. */
/* Port ID - bits 31:24. */
#define GET_PORT_ID(p) (((p) & GENMASK(31, 24)) >> 24)
#define SET_PORT_ID(p) (((p) << 24) & GENMASK(31, 24))
#define EVENT_DATA BIT(2)
/* Normal TRB fields. */
/* transfer_len bitmasks - bits 0:16. */
#define TRB_LEN(p) ((p) & GENMASK(16, 0))
/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */
#define TRB_TD_SIZE(p) (min((p), (u32)31) << 17)
#define GET_TD_SIZE(p) (((p) & GENMASK(21, 17)) >> 17)
/*
* Controller uses the TD_SIZE field for TBC if Extended TBC
* is enabled (ETE).
*/
#define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17)
/* Interrupter Target - which MSI-X vector to target the completion event at. */
#define TRB_INTR_TARGET(p) (((p) << 22) & GENMASK(31, 22))
#define GET_INTR_TARGET(p) (((p) & GENMASK(31, 22)) >> 22)
/*
* Total burst count field, Rsvdz on controller with Extended TBC
* enabled (ETE).
*/
#define TRB_TBC(p) (((p) & 0x3) << 7)
#define TRB_TLBPC(p) (((p) & 0xf) << 16)
/* Cycle bit - indicates TRB ownership by driver or driver.*/
#define TRB_CYCLE BIT(0)
/*
* Force next event data TRB to be evaluated before task switch.
* Used to pass OS data back after a TD completes.
*/
#define TRB_ENT BIT(1)
/* Interrupt on short packet. */
#define TRB_ISP BIT(2)
/* Set PCIe no snoop attribute. */
#define TRB_NO_SNOOP BIT(3)
/* Chain multiple TRBs into a TD. */
#define TRB_CHAIN BIT(4)
/* Interrupt on completion. */
#define TRB_IOC BIT(5)
/* The buffer pointer contains immediate data. */
#define TRB_IDT BIT(6)
/* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */
#define TRB_STAT BIT(7)
/* Block Event Interrupt. */
#define TRB_BEI BIT(9)
/* Control transfer TRB specific fields. */
#define TRB_DIR_IN BIT(16)
/* TRB bit mask in Data Stage TRB */
#define TRB_SETUPID_BITMASK GENMASK(9, 8)
#define TRB_SETUPID(p) ((p) << 8)
#define TRB_SETUPID_TO_TYPE(p) (((p) & TRB_SETUPID_BITMASK) >> 8)
#define TRB_SETUP_SPEEDID_USB3 0x1
#define TRB_SETUP_SPEEDID_USB2 0x0
#define TRB_SETUP_SPEEDID(p) ((p) & (1 << 7))
#define TRB_SETUPSTAT_ACK 0x1
#define TRB_SETUPSTAT_STALL 0x0
#define TRB_SETUPSTAT(p) ((p) << 6)
/* Isochronous TRB specific fields */
#define TRB_SIA BIT(31)
#define TRB_FRAME_ID(p) (((p) << 20) & GENMASK(30, 20))
struct cdnsp_generic_trb {
__le32 field[4];
};
union cdnsp_trb {
struct cdnsp_link_trb link;
struct cdnsp_transfer_event trans_event;
struct cdnsp_event_cmd event_cmd;
struct cdnsp_generic_trb generic;
};
/* TRB bit mask. */
#define TRB_TYPE_BITMASK GENMASK(15, 10)
#define TRB_TYPE(p) ((p) << 10)
#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
/* TRB type IDs. */
/* bulk, interrupt, isoc scatter/gather, and control data stage. */
#define TRB_NORMAL 1
/* Setup Stage for control transfers. */
#define TRB_SETUP 2
/* Data Stage for control transfers. */
#define TRB_DATA 3
/* Status Stage for control transfers. */
#define TRB_STATUS 4
/* ISOC transfers. */
#define TRB_ISOC 5
/* TRB for linking ring segments. */
#define TRB_LINK 6
#define TRB_EVENT_DATA 7
/* Transfer Ring No-op (not for the command ring). */
#define TRB_TR_NOOP 8
/* Command TRBs */
/* Enable Slot Command. */
#define TRB_ENABLE_SLOT 9
/* Disable Slot Command. */
#define TRB_DISABLE_SLOT 10
/* Address Device Command. */
#define TRB_ADDR_DEV 11
/* Configure Endpoint Command. */
#define TRB_CONFIG_EP 12
/* Evaluate Context Command. */
#define TRB_EVAL_CONTEXT 13
/* Reset Endpoint Command. */
#define TRB_RESET_EP 14
/* Stop Transfer Ring Command. */
#define TRB_STOP_RING 15
/* Set Transfer Ring Dequeue Pointer Command. */
#define TRB_SET_DEQ 16
/* Reset Device Command. */
#define TRB_RESET_DEV 17
/* Force Event Command (opt). */
#define TRB_FORCE_EVENT 18
/* Force Header Command - generate a transaction or link management packet. */
#define TRB_FORCE_HEADER 22
/* No-op Command - not for transfer rings. */
#define TRB_CMD_NOOP 23
/* TRB IDs 24-31 reserved. */
/* Event TRBS. */
/* Transfer Event. */
#define TRB_TRANSFER 32
/* Command Completion Event. */
#define TRB_COMPLETION 33
/* Port Status Change Event. */
#define TRB_PORT_STATUS 34
/* Device Controller Event. */
#define TRB_HC_EVENT 37
/* MFINDEX Wrap Event - microframe counter wrapped. */
#define TRB_MFINDEX_WRAP 39
/* TRB IDs 40-47 reserved. */
/* Endpoint Not Ready Event. */
#define TRB_ENDPOINT_NRDY 48
/* TRB IDs 49-53 reserved. */
/* Halt Endpoint Command. */
#define TRB_HALT_ENDPOINT 54
/* Doorbell Overflow Event. */
#define TRB_DRB_OVERFLOW 57
/* Flush Endpoint Command. */
#define TRB_FLUSH_ENDPOINT 58
#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
cpu_to_le32(TRB_TYPE(TRB_LINK)))
#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
/*
* TRBS_PER_SEGMENT must be a multiple of 4.
* The command ring is 64-byte aligned, so it must also be greater than 16.
*/
#define TRBS_PER_SEGMENT 256
#define TRBS_PER_EVENT_SEGMENT 256
#define TRBS_PER_EV_DEQ_UPDATE 100
#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT * 16)
#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
/* TRB buffer pointers can't cross 64KB boundaries. */
#define TRB_MAX_BUFF_SHIFT 16
#define TRB_MAX_BUFF_SIZE BIT(TRB_MAX_BUFF_SHIFT)
/* How much data is left before the 64KB boundary? */
#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \
((addr) & (TRB_MAX_BUFF_SIZE - 1)))
/**
* struct cdnsp_segment - segment related data.
* @trbs: Array of Transfer Request Blocks.
* @next: Pointer to the next segment.
* @dma: DMA address of current segment.
* @bounce_dma: Bounce buffer DMA address .
* @bounce_buf: Bounce buffer virtual address.
* bounce_offs: Bounce buffer offset.
* bounce_len: Bounce buffer length.
*/
struct cdnsp_segment {
union cdnsp_trb *trbs;
struct cdnsp_segment *next;
dma_addr_t dma;
/* Max packet sized bounce buffer for td-fragmant alignment */
dma_addr_t bounce_dma;
void *bounce_buf;
unsigned int bounce_offs;
unsigned int bounce_len;
};
/**
* struct cdnsp_td - Transfer Descriptor object.
* @td_list: Used for binding TD with ep_ring->td_list.
* @preq: Request associated with this TD
* @start_seg: Segment containing the first_trb in TD.
* @first_trb: First TRB for this TD.
* @last_trb: Last TRB related with TD.
* @bounce_seg: Bounce segment for this TD.
* @request_length_set: actual_length of the request has already been set.
* @drbl - TD has been added to HW scheduler - only for stream capable
* endpoints.
*/
struct cdnsp_td {
struct list_head td_list;
struct cdnsp_request *preq;
struct cdnsp_segment *start_seg;
union cdnsp_trb *first_trb;
union cdnsp_trb *last_trb;
struct cdnsp_segment *bounce_seg;
bool request_length_set;
bool drbl;
};
/**
* struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring.
* @new_deq_seg: New dequeue segment.
* @new_deq_ptr: New dequeue pointer.
* @new_cycle_state: New cycle state.
* @stream_id: stream id for which new dequeue pointer has been selected.
*/
struct cdnsp_dequeue_state {
struct cdnsp_segment *new_deq_seg;
union cdnsp_trb *new_deq_ptr;
int new_cycle_state;
unsigned int stream_id;
};
enum cdnsp_ring_type {
TYPE_CTRL = 0,
TYPE_ISOC,
TYPE_BULK,
TYPE_INTR,
TYPE_STREAM,
TYPE_COMMAND,
TYPE_EVENT,
};
/**
* struct cdnsp_ring - information describing transfer, command or event ring.
* @first_seg: First segment on transfer ring.
* @last_seg: Last segment on transfer ring.
* @enqueue: SW enqueue pointer address.
* @enq_seg: SW enqueue segment address.
* @dequeue: SW dequeue pointer address.
* @deq_seg: SW dequeue segment address.
* @td_list: transfer descriptor list associated with this ring.
* @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle
* field to give ownership of the TRB to the device controller
* (if we are the producer) or to check if we own the TRB
* (if we are the consumer).
* @stream_id: Stream id
* @stream_active: Stream is active - PRIME packet has been detected.
* @stream_rejected: This ring has been rejected by host.
* @num_tds: Number of TDs associated with ring.
* @num_segs: Number of segments.
* @num_trbs_free: Number of free TRBs on the ring.
* @bounce_buf_len: Length of bounce buffer.
* @type: Ring type - event, transfer, or command ring.
* @last_td_was_short - TD is short TD.
* @trb_address_map: For mapping physical TRB addresses to segments in
* stream rings.
*/
struct cdnsp_ring {
struct cdnsp_segment *first_seg;
struct cdnsp_segment *last_seg;
union cdnsp_trb *enqueue;
struct cdnsp_segment *enq_seg;
union cdnsp_trb *dequeue;
struct cdnsp_segment *deq_seg;
struct list_head td_list;
u32 cycle_state;
unsigned int stream_id;
unsigned int stream_active;
unsigned int stream_rejected;
int num_tds;
unsigned int num_segs;
unsigned int num_trbs_free;
unsigned int bounce_buf_len;
enum cdnsp_ring_type type;
bool last_td_was_short;
struct radix_tree_root *trb_address_map;
};
/**
* struct cdnsp_erst_entry - even ring segment table entry object.
* @seg_addr: 64-bit event ring segment address.
* seg_size: Number of TRBs in segment.;
*/
struct cdnsp_erst_entry {
__le64 seg_addr;
__le32 seg_size;
/* Set to zero */
__le32 rsvd;
};
/**
* struct cdnsp_erst - even ring segment table for event ring.
* @entries: Array of event ring segments
* @num_entries: Number of segments in entries array.
* @erst_dma_addr: DMA address for entries array.
*/
struct cdnsp_erst {
struct cdnsp_erst_entry *entries;
unsigned int num_entries;
dma_addr_t erst_dma_addr;
};
/**
* struct cdnsp_request - extended device side representation of usb_request
* object .
* @td: Transfer descriptor associated with this request.
* @request: Generic usb_request object describing single I/O request.
* @list: Used to adding request to endpoint pending_list.
* @pep: Extended representation of usb_ep object
* @epnum: Endpoint number associated with usb request.
* @direction: Endpoint direction for usb request.
*/
struct cdnsp_request {
struct cdnsp_td td;
struct usb_request request;
struct list_head list;
struct cdnsp_ep *pep;
u8 epnum;
unsigned direction:1;
};
#define ERST_NUM_SEGS 1
/* Stages used during enumeration process.*/
enum cdnsp_ep0_stage {
CDNSP_SETUP_STAGE,
CDNSP_DATA_STAGE,
CDNSP_STATUS_STAGE,
};
/**
* struct cdnsp_port - holds information about detected ports.
* @port_num: Port number.
* @exist: Indicate if port exist.
* maj_rev: Major revision.
* min_rev: Minor revision.
*/
struct cdnsp_port {
struct cdnsp_port_regs __iomem *regs;
u8 port_num;
u8 exist;
u8 maj_rev;
u8 min_rev;
};
#define CDNSP_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
#define CDNSP_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
#define CDNSP_EXT_PORT_OFF(x) ((x) & 0xff)
#define CDNSP_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
/**
* struct cdnsp_device - represent USB device.
* @dev: Pointer to device structure associated whit this controller.
* @gadget: Device side representation of the peripheral controller.
* @gadget_driver: Pointer to the gadget driver.
* @irq: IRQ line number used by device side.
* @regs:IO device memory.
* @cap_regs: Capability registers.
* @op_regs: Operational registers.
* @run_regs: Runtime registers.
* @dba: Device base address register.
* @ir_set: Current interrupter register set.
* @port20_regs: Port 2.0 Peripheral Configuration Registers.
* @port3x_regs: USB3.x Port Peripheral Configuration Registers.
* @rev_cap: Controller Capabilities Registers.
* @hcs_params1: Cached register copies of read-only HCSPARAMS1
* @hcc_params: Cached register copies of read-only HCCPARAMS1
* @setup: Temporary buffer for setup packet.
* @ep0_preq: Internal allocated request used during enumeration.
* @ep0_stage: ep0 stage during enumeration process.
* @three_stage_setup: Three state or two state setup.
* @ep0_expect_in: Data IN expected for control transfer.
* @setup_id: Setup identifier.
* @setup_speed - Speed detected for current SETUP packet.
* @setup_buf: Buffer for SETUP packet.
* @device_address: Current device address.
* @may_wakeup: remote wakeup enabled/disabled.
* @lock: Lock used in interrupt thread context.
* @hci_version: device controller version.
* @dcbaa: Device context base address array.
* @cmd_ring: Command ring.
* @cmd: Represent all what is needed to issue command on Command Ring.
* @event_ring: Event ring.
* @erst: Event Ring Segment table
* @slot_id: Current Slot ID. Should be 0 or 1.
* @out_ctx: Output context.
* @in_ctx: Input context.
* @eps: array of endpoints object associated with device.
* @usb2_hw_lpm_capable: hardware lpm is enabled;
* @u1_allowed: Allow device transition to U1 state.
* @u2_allowed: Allow device transition to U2 state
* @device_pool: DMA pool for allocating input and output context.
* @segment_pool: DMA pool for allocating new segments.
* @cdnsp_state: Current state of controller.
* @link_state: Current link state.
* @usb2_port - Port USB 2.0.
* @usb3_port - Port USB 3.0.
* @active_port - Current selected Port.
* @test_mode: selected Test Mode.
*/
struct cdnsp_device {
struct device *dev;
struct usb_gadget gadget;
struct usb_gadget_driver *gadget_driver;
unsigned int irq;
void __iomem *regs;
/* Registers map */
struct cdnsp_cap_regs __iomem *cap_regs;
struct cdnsp_op_regs __iomem *op_regs;
struct cdnsp_run_regs __iomem *run_regs;
struct cdnsp_doorbell_array __iomem *dba;
struct cdnsp_intr_reg __iomem *ir_set;
struct cdnsp_20port_cap __iomem *port20_regs;
struct cdnsp_3xport_cap __iomem *port3x_regs;
struct cdnsp_rev_cap __iomem *rev_cap;
/* Cached register copies of read-only CDNSP data */
__u32 hcs_params1;
__u32 hcs_params3;
__u32 hcc_params;
/* Lock used in interrupt thread context. */
spinlock_t lock;
struct usb_ctrlrequest setup;
struct cdnsp_request ep0_preq;
enum cdnsp_ep0_stage ep0_stage;
u8 three_stage_setup;
u8 ep0_expect_in;
u8 setup_id;
u8 setup_speed;
void *setup_buf;
u8 device_address;
int may_wakeup;
u16 hci_version;
/* data structures */
struct cdnsp_device_context_array *dcbaa;
struct cdnsp_ring *cmd_ring;
struct cdnsp_command cmd;
struct cdnsp_ring *event_ring;
struct cdnsp_erst erst;
int slot_id;
/*
* Commands to the hardware are passed an "input context" that
* tells the hardware what to change in its data structures.
* The hardware will return changes in an "output context" that
* software must allocate for the hardware. .
*/
struct cdnsp_container_ctx out_ctx;
struct cdnsp_container_ctx in_ctx;
struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM];
u8 usb2_hw_lpm_capable:1;
u8 u1_allowed:1;
u8 u2_allowed:1;
/* DMA pools */
struct dma_pool *device_pool;
struct dma_pool *segment_pool;
#define CDNSP_STATE_HALTED BIT(1)
#define CDNSP_STATE_DYING BIT(2)
#define CDNSP_STATE_DISCONNECT_PENDING BIT(3)
#define CDNSP_WAKEUP_PENDING BIT(4)
unsigned int cdnsp_state;
unsigned int link_state;
struct cdnsp_port usb2_port;
struct cdnsp_port usb3_port;
struct cdnsp_port *active_port;
u16 test_mode;
};
/*
* Registers should always be accessed with double word or quad word accesses.
*
* Registers with 64-bit address pointers should be written to with
* dword accesses by writing the low dword first (ptr[0]), then the high dword
* (ptr[1]) second. controller implementations that do not support 64-bit
* address pointers will ignore the high dword, and write order is irrelevant.
*/
static inline u64 cdnsp_read_64(__le64 __iomem *regs)
{
return lo_hi_readq(regs);
}
static inline void cdnsp_write_64(const u64 val, __le64 __iomem *regs)
{
lo_hi_writeq(val, regs);
}
/* CDNSP memory management functions. */
void cdnsp_mem_cleanup(struct cdnsp_device *pdev);
int cdnsp_mem_init(struct cdnsp_device *pdev);
int cdnsp_setup_addressable_priv_dev(struct cdnsp_device *pdev);
void cdnsp_copy_ep0_dequeue_into_input_ctx(struct cdnsp_device *pdev);
void cdnsp_endpoint_zero(struct cdnsp_device *pdev, struct cdnsp_ep *ep);
int cdnsp_endpoint_init(struct cdnsp_device *pdev,
struct cdnsp_ep *pep,
gfp_t mem_flags);
int cdnsp_ring_expansion(struct cdnsp_device *pdev,
struct cdnsp_ring *ring,
unsigned int num_trbs, gfp_t flags);
struct cdnsp_ring *cdnsp_dma_to_transfer_ring(struct cdnsp_ep *ep, u64 address);
int cdnsp_alloc_stream_info(struct cdnsp_device *pdev,
struct cdnsp_ep *pep,
unsigned int num_stream_ctxs,
unsigned int num_streams);
int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
void cdnsp_free_endpoint_rings(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
/* Device controller glue. */
int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id);
int cdnsp_halt(struct cdnsp_device *pdev);
void cdnsp_died(struct cdnsp_device *pdev);
int cdnsp_reset(struct cdnsp_device *pdev);
irqreturn_t cdnsp_irq_handler(int irq, void *priv);
int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup);
void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *usbsssp_data,
struct usb_request *req, int enable);
irqreturn_t cdnsp_thread_irq_handler(int irq, void *data);
/* Ring, segment, TRB, and TD functions. */
dma_addr_t cdnsp_trb_virt_to_dma(struct cdnsp_segment *seg,
union cdnsp_trb *trb);
bool cdnsp_last_trb_on_seg(struct cdnsp_segment *seg, union cdnsp_trb *trb);
bool cdnsp_last_trb_on_ring(struct cdnsp_ring *ring,
struct cdnsp_segment *seg,
union cdnsp_trb *trb);
int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev);
void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
union cdnsp_trb *event_ring_deq,
u8 clear_ehb);
void cdnsp_initialize_ring_info(struct cdnsp_ring *ring);
void cdnsp_ring_cmd_db(struct cdnsp_device *pdev);
void cdnsp_queue_slot_control(struct cdnsp_device *pdev, u32 trb_type);
void cdnsp_queue_address_device(struct cdnsp_device *pdev,
dma_addr_t in_ctx_ptr,
enum cdnsp_setup_dev setup);
void cdnsp_queue_stop_endpoint(struct cdnsp_device *pdev,
unsigned int ep_index);
int cdnsp_queue_ctrl_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq);
int cdnsp_queue_isoc_tx_prepare(struct cdnsp_device *pdev,
struct cdnsp_request *preq);
void cdnsp_queue_configure_endpoint(struct cdnsp_device *pdev,
dma_addr_t in_ctx_ptr);
void cdnsp_queue_reset_ep(struct cdnsp_device *pdev, unsigned int ep_index);
void cdnsp_queue_halt_endpoint(struct cdnsp_device *pdev,
unsigned int ep_index);
void cdnsp_queue_flush_endpoint(struct cdnsp_device *pdev,
unsigned int ep_index);
void cdnsp_force_header_wakeup(struct cdnsp_device *pdev, int intf_num);
void cdnsp_queue_reset_device(struct cdnsp_device *pdev);
void cdnsp_queue_new_dequeue_state(struct cdnsp_device *pdev,
struct cdnsp_ep *pep,
struct cdnsp_dequeue_state *deq_state);
void cdnsp_ring_doorbell_for_active_rings(struct cdnsp_device *pdev,
struct cdnsp_ep *pep);
void cdnsp_inc_deq(struct cdnsp_device *pdev, struct cdnsp_ring *ring);
void cdnsp_set_link_state(struct cdnsp_device *pdev,
__le32 __iomem *port_regs, u32 link_state);
u32 cdnsp_port_state_to_neutral(u32 state);
/* CDNSP device controller contexts. */
int cdnsp_enable_slot(struct cdnsp_device *pdev);
int cdnsp_disable_slot(struct cdnsp_device *pdev);
struct cdnsp_input_control_ctx
*cdnsp_get_input_control_ctx(struct cdnsp_container_ctx *ctx);
struct cdnsp_slot_ctx *cdnsp_get_slot_ctx(struct cdnsp_container_ctx *ctx);
struct cdnsp_ep_ctx *cdnsp_get_ep_ctx(struct cdnsp_container_ctx *ctx,
unsigned int ep_index);
/* CDNSP gadget interface. */
void cdnsp_suspend_gadget(struct cdnsp_device *pdev);
void cdnsp_resume_gadget(struct cdnsp_device *pdev);
void cdnsp_disconnect_gadget(struct cdnsp_device *pdev);
void cdnsp_gadget_giveback(struct cdnsp_ep *pep, struct cdnsp_request *preq,
int status);
int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq);
unsigned int cdnsp_port_speed(unsigned int port_status);
void cdnsp_irq_reset(struct cdnsp_device *pdev);
int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
struct cdnsp_ep *pep, int value);
int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
int cdnsp_cmd_flush_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep);
void cdnsp_setup_analyze(struct cdnsp_device *pdev);
int cdnsp_status_stage(struct cdnsp_device *pdev);
int cdnsp_reset_device(struct cdnsp_device *pdev);
/**
* next_request - gets the next request on the given list
* @list: the request list to operate on
*
* Caller should take care of locking. This function return NULL or the first
* request available on list.
*/
static inline struct cdnsp_request *next_request(struct list_head *list)
{
return list_first_entry_or_null(list, struct cdnsp_request, list);
}
#define to_cdnsp_ep(ep) (container_of(ep, struct cdnsp_ep, endpoint))
#define gadget_to_cdnsp(g) (container_of(g, struct cdnsp_device, gadget))
#define request_to_cdnsp_request(r) (container_of(r, struct cdnsp_request, \
request))
#define to_cdnsp_request(r) (container_of(r, struct cdnsp_request, request))
int cdnsp_remove_request(struct cdnsp_device *pdev, struct cdnsp_request *preq,
struct cdnsp_ep *pep);
#endif /* __LINUX_CDNSP_GADGET_H */
Reference in a new issue View git blame Copy permalink