linux-stable/drivers/mfd/ab8500-sysctrl.c
Fabio Baltieri 5649d8f9e3 mfd: ab8500-sysctrl: Let sysctrl driver work without pdata
A check for a valid plat->sysctrl was introduced in:

2377e52 mfd: ab8500-sysctrl: Error check clean up

but the driver works just fine even without that initialization data,
and enforcing it breaks existing platforms for no reason.

This patch removes the check and let the driver go ahead with probe.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-21 23:23:21 +02:00

254 lines
5.9 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson.
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/reboot.h>
#include <linux/signal.h>
#include <linux/power_supply.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-sysctrl.h>
/* RtcCtrl bits */
#define AB8500_ALARM_MIN_LOW 0x08
#define AB8500_ALARM_MIN_MID 0x09
#define RTC_CTRL 0x0B
#define RTC_ALARM_ENABLE 0x4
static struct device *sysctrl_dev;
static void ab8500_power_off(void)
{
sigset_t old;
sigset_t all;
static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
int i;
bool charger_present = false;
union power_supply_propval val;
struct power_supply *psy;
int ret;
if (sysctrl_dev == NULL) {
pr_err("%s: sysctrl not initialized\n", __func__);
return;
}
/*
* If we have a charger connected and we're powering off,
* reboot into charge-only mode.
*/
for (i = 0; i < ARRAY_SIZE(pss); i++) {
psy = power_supply_get_by_name(pss[i]);
if (!psy)
continue;
ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val);
if (!ret && val.intval) {
charger_present = true;
break;
}
}
if (!charger_present)
goto shutdown;
/* Check if battery is known */
psy = power_supply_get_by_name("ab8500_btemp");
if (psy) {
ret = psy->get_property(psy, POWER_SUPPLY_PROP_TECHNOLOGY,
&val);
if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
printk(KERN_INFO
"Charger \"%s\" is connected with known battery."
" Rebooting.\n",
pss[i]);
machine_restart("charging");
}
}
shutdown:
sigfillset(&all);
if (!sigprocmask(SIG_BLOCK, &all, &old)) {
(void)ab8500_sysctrl_set(AB8500_STW4500CTRL1,
AB8500_STW4500CTRL1_SWOFF |
AB8500_STW4500CTRL1_SWRESET4500N);
(void)sigprocmask(SIG_SETMASK, &old, NULL);
}
}
/*
* Use the AB WD to reset the platform. It will perform a hard
* reset instead of a soft reset. Write the reset reason to
* the AB before reset, which can be read upon restart.
*/
void ab8500_restart(char mode, const char *cmd)
{
struct ab8500_platform_data *plat;
struct ab8500_sysctrl_platform_data *pdata;
u16 reason = 0;
u8 val;
if (sysctrl_dev == NULL) {
pr_err("%s: sysctrl not initialized\n", __func__);
return;
}
plat = dev_get_platdata(sysctrl_dev->parent);
pdata = plat->sysctrl;
if (pdata && pdata->reboot_reason_code)
reason = pdata->reboot_reason_code(cmd);
else
pr_warn("[%s] No reboot reason set. Default reason %d\n",
__func__, reason);
/*
* Disable RTC alarm, just a precaution so that no alarm
* is running when WD reset is executed.
*/
abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
RTC_CTRL , &val);
abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
/*
* Android is not using the RTC alarm registers during reboot
* so we borrow them for writing the reason of reset
*/
/* reason[8 LSB] */
val = reason & 0xFF;
abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
AB8500_ALARM_MIN_LOW , val);
/* reason[8 MSB] */
val = (reason>>8) & 0xFF;
abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
AB8500_ALARM_MIN_MID , val);
/* Setting WD timeout to 0 */
ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
/* Setting the parameters to AB8500 WD*/
ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
}
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
(bank == AB8500_SYS_CTRL2_BLOCK));
}
int ab8500_sysctrl_read(u16 reg, u8 *value)
{
u8 bank;
if (sysctrl_dev == NULL)
return -EINVAL;
bank = (reg >> 8);
if (!valid_bank(bank))
return -EINVAL;
return abx500_get_register_interruptible(sysctrl_dev, bank,
(u8)(reg & 0xFF), value);
}
EXPORT_SYMBOL(ab8500_sysctrl_read);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
{
u8 bank;
if (sysctrl_dev == NULL)
return -EINVAL;
bank = (reg >> 8);
if (!valid_bank(bank))
return -EINVAL;
return abx500_mask_and_set_register_interruptible(sysctrl_dev, bank,
(u8)(reg & 0xFF), mask, value);
}
EXPORT_SYMBOL(ab8500_sysctrl_write);
static int ab8500_sysctrl_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_platform_data *plat;
struct ab8500_sysctrl_platform_data *pdata;
plat = dev_get_platdata(pdev->dev.parent);
if (!plat)
return -EINVAL;
sysctrl_dev = &pdev->dev;
if (!pm_power_off)
pm_power_off = ab8500_power_off;
pdata = plat->sysctrl;
if (pdata) {
int last, ret, i, j;
if (is_ab8505(ab8500))
last = AB8500_SYSCLKREQ4RFCLKBUF;
else
last = AB8500_SYSCLKREQ8RFCLKBUF;
for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
j = i - AB8500_SYSCLKREQ1RFCLKBUF;
ret = ab8500_sysctrl_write(i, 0xff,
pdata->initial_req_buf_config[j]);
dev_dbg(&pdev->dev,
"Setting SysClkReq%dRfClkBuf 0x%X\n",
j + 1,
pdata->initial_req_buf_config[j]);
if (ret < 0) {
dev_err(&pdev->dev,
"unable to set sysClkReq%dRfClkBuf: "
"%d\n", j + 1, ret);
}
}
}
return 0;
}
static int ab8500_sysctrl_remove(struct platform_device *pdev)
{
sysctrl_dev = NULL;
if (pm_power_off == ab8500_power_off)
pm_power_off = NULL;
return 0;
}
static struct platform_driver ab8500_sysctrl_driver = {
.driver = {
.name = "ab8500-sysctrl",
.owner = THIS_MODULE,
},
.probe = ab8500_sysctrl_probe,
.remove = ab8500_sysctrl_remove,
};
static int __init ab8500_sysctrl_init(void)
{
return platform_driver_register(&ab8500_sysctrl_driver);
}
arch_initcall(ab8500_sysctrl_init);
MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com");
MODULE_DESCRIPTION("AB8500 system control driver");
MODULE_LICENSE("GPL v2");