linux-stable/drivers/usb/host/ehci-timer.c
Alan Stern 314466101c USB: EHCI: use hrtimer for async schedule
This patch (as1576) adds hrtimer support for managing ehci-hcd's
async schedule.  Just as with the earlier change to the periodic
schedule management, two new hrtimer events take care of everything.

One event polls at 1-ms intervals to see when the Asynchronous
Schedule Status (ASS) flag matches the Asynchronous Schedule Enable
(ASE) value; the schedule's state must not be changed until it does.
The other event delays for 15 ms after the async schedule becomes
empty before turning it off.

The new events replace a busy-wait poll and a kernel timer usage.
They also replace the rather illogical method currently used for
indicating the async schedule should be turned off: attempting to
unlink the dedicated QH at the head of the async list.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 16:54:25 -07:00

235 lines
7 KiB
C

/*
* Copyright (C) 2012 by Alan Stern
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
/* This file is part of ehci-hcd.c */
/*-------------------------------------------------------------------------*/
/* Set a bit in the USBCMD register */
static void ehci_set_command_bit(struct ehci_hcd *ehci, u32 bit)
{
ehci->command |= bit;
ehci_writel(ehci, ehci->command, &ehci->regs->command);
/* unblock posted write */
ehci_readl(ehci, &ehci->regs->command);
}
/* Clear a bit in the USBCMD register */
static void ehci_clear_command_bit(struct ehci_hcd *ehci, u32 bit)
{
ehci->command &= ~bit;
ehci_writel(ehci, ehci->command, &ehci->regs->command);
/* unblock posted write */
ehci_readl(ehci, &ehci->regs->command);
}
/*-------------------------------------------------------------------------*/
/*
* EHCI timer support... Now using hrtimers.
*
* Lots of different events are triggered from ehci->hrtimer. Whenever
* the timer routine runs, it checks each possible event; events that are
* currently enabled and whose expiration time has passed get handled.
* The set of enabled events is stored as a collection of bitflags in
* ehci->enabled_hrtimer_events, and they are numbered in order of
* increasing delay values (ranging between 1 ms and 100 ms).
*
* Rather than implementing a sorted list or tree of all pending events,
* we keep track only of the lowest-numbered pending event, in
* ehci->next_hrtimer_event. Whenever ehci->hrtimer gets restarted, its
* expiration time is set to the timeout value for this event.
*
* As a result, events might not get handled right away; the actual delay
* could be anywhere up to twice the requested delay. This doesn't
* matter, because none of the events are especially time-critical. The
* ones that matter most all have a delay of 1 ms, so they will be
* handled after 2 ms at most, which is okay. In addition to this, we
* allow for an expiration range of 1 ms.
*/
/*
* Delay lengths for the hrtimer event types.
* Keep this list sorted by delay length, in the same order as
* the event types indexed by enum ehci_hrtimer_event in ehci.h.
*/
static unsigned event_delays_ns[] = {
1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_ASS */
1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_PSS */
10 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_PERIODIC */
15 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_ASYNC */
};
/* Enable a pending hrtimer event */
static void ehci_enable_event(struct ehci_hcd *ehci, unsigned event,
bool resched)
{
ktime_t *timeout = &ehci->hr_timeouts[event];
if (resched)
*timeout = ktime_add(ktime_get(),
ktime_set(0, event_delays_ns[event]));
ehci->enabled_hrtimer_events |= (1 << event);
/* Track only the lowest-numbered pending event */
if (event < ehci->next_hrtimer_event) {
ehci->next_hrtimer_event = event;
hrtimer_start_range_ns(&ehci->hrtimer, *timeout,
NSEC_PER_MSEC, HRTIMER_MODE_ABS);
}
}
/* Poll the STS_ASS status bit; see when it agrees with CMD_ASE */
static void ehci_poll_ASS(struct ehci_hcd *ehci)
{
unsigned actual, want;
/* Don't enable anything if the controller isn't running (e.g., died) */
if (ehci->rh_state != EHCI_RH_RUNNING)
return;
want = (ehci->command & CMD_ASE) ? STS_ASS : 0;
actual = ehci_readl(ehci, &ehci->regs->status) & STS_ASS;
if (want != actual) {
/* Poll again later, but give up after about 20 ms */
if (ehci->ASS_poll_count++ < 20) {
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
return;
}
ehci_warn(ehci, "Waited too long for the async schedule status, giving up\n");
}
ehci->ASS_poll_count = 0;
/* The status is up-to-date; restart or stop the schedule as needed */
if (want == 0) { /* Stopped */
if (ehci->async_count > 0)
ehci_set_command_bit(ehci, CMD_ASE);
} else { /* Running */
if (ehci->async_count == 0) {
/* Turn off the schedule after a while */
ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_ASYNC,
true);
}
}
}
/* Turn off the async schedule after a brief delay */
static void ehci_disable_ASE(struct ehci_hcd *ehci)
{
ehci_clear_command_bit(ehci, CMD_ASE);
}
/* Poll the STS_PSS status bit; see when it agrees with CMD_PSE */
static void ehci_poll_PSS(struct ehci_hcd *ehci)
{
unsigned actual, want;
/* Don't do anything if the controller isn't running (e.g., died) */
if (ehci->rh_state != EHCI_RH_RUNNING)
return;
want = (ehci->command & CMD_PSE) ? STS_PSS : 0;
actual = ehci_readl(ehci, &ehci->regs->status) & STS_PSS;
if (want != actual) {
/* Poll again later, but give up after about 20 ms */
if (ehci->PSS_poll_count++ < 20) {
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
return;
}
ehci_warn(ehci, "Waited too long for the periodic schedule status, giving up\n");
}
ehci->PSS_poll_count = 0;
/* The status is up-to-date; restart or stop the schedule as needed */
if (want == 0) { /* Stopped */
free_cached_lists(ehci);
if (ehci->periodic_count > 0) {
/* make sure ehci_work scans these */
ehci->next_uframe = ehci_read_frame_index(ehci)
& ((ehci->periodic_size << 3) - 1);
ehci_set_command_bit(ehci, CMD_PSE);
}
} else { /* Running */
if (ehci->periodic_count == 0) {
/* Turn off the schedule after a while */
ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_PERIODIC,
true);
}
}
}
/* Turn off the periodic schedule after a brief delay */
static void ehci_disable_PSE(struct ehci_hcd *ehci)
{
ehci_clear_command_bit(ehci, CMD_PSE);
/* Poll to see when it actually stops */
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
}
/*
* Handler functions for the hrtimer event types.
* Keep this array in the same order as the event types indexed by
* enum ehci_hrtimer_event in ehci.h.
*/
static void (*event_handlers[])(struct ehci_hcd *) = {
ehci_poll_ASS, /* EHCI_HRTIMER_POLL_ASS */
ehci_poll_PSS, /* EHCI_HRTIMER_POLL_PSS */
ehci_disable_PSE, /* EHCI_HRTIMER_DISABLE_PERIODIC */
ehci_disable_ASE, /* EHCI_HRTIMER_DISABLE_ASYNC */
};
static enum hrtimer_restart ehci_hrtimer_func(struct hrtimer *t)
{
struct ehci_hcd *ehci = container_of(t, struct ehci_hcd, hrtimer);
ktime_t now;
unsigned long events;
unsigned long flags;
unsigned e;
spin_lock_irqsave(&ehci->lock, flags);
events = ehci->enabled_hrtimer_events;
ehci->enabled_hrtimer_events = 0;
ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
/*
* Check each pending event. If its time has expired, handle
* the event; otherwise re-enable it.
*/
now = ktime_get();
for_each_set_bit(e, &events, EHCI_HRTIMER_NUM_EVENTS) {
if (now.tv64 >= ehci->hr_timeouts[e].tv64)
event_handlers[e](ehci);
else
ehci_enable_event(ehci, e, false);
}
spin_unlock_irqrestore(&ehci->lock, flags);
return HRTIMER_NORESTART;
}