linux-stable/arch/x86/kernel/process.c
Andy Lutomirski 33344368cb x86/fpu: Clean up the fpu__clear() variants
fpu__clear() currently resets both register state and kernel XSAVE buffer
state.  It has two modes: one for all state (supervisor and user) and
another for user state only.  fpu__clear_all() uses the "all state"
(user_only=0) mode, while a number of signal paths use the user_only=1
mode.

Make fpu__clear() work only for user state (user_only=1) and remove the
"all state" (user_only=0) code.  Rename it to match so it can be used by
the signal paths.

Replace the "all state" (user_only=0) fpu__clear() functionality.  Use the
TIF_NEED_FPU_LOAD functionality instead of making any actual hardware
registers changes in this path.

Instead of invoking fpu__initialize() just memcpy() init_fpstate into the
task's FPU state because that has already the correct format and in case of
PKRU also contains the default PKRU value. Move the actual PKRU write out
into flush_thread() where it belongs and where it will end up anyway when
PKRU and XSTATE have been untangled.

For bisectability a workaround is required which stores the PKRU value in
the xstate memory until PKRU is untangled from XSTATE for context
switching and return to user.

[ Dave Hansen: Polished changelog ]
[ tglx: Fixed the PKRU fallout ]

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.922729522@linutronix.de
2021-06-23 19:23:07 +02:00

1005 lines
24 KiB
C

// SPDX-License-Identifier: GPL-2.0
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/prctl.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/sched/idle.h>
#include <linux/sched/debug.h>
#include <linux/sched/task.h>
#include <linux/sched/task_stack.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/pm.h>
#include <linux/tick.h>
#include <linux/random.h>
#include <linux/user-return-notifier.h>
#include <linux/dmi.h>
#include <linux/utsname.h>
#include <linux/stackprotector.h>
#include <linux/cpuidle.h>
#include <linux/acpi.h>
#include <linux/elf-randomize.h>
#include <trace/events/power.h>
#include <linux/hw_breakpoint.h>
#include <asm/cpu.h>
#include <asm/apic.h>
#include <linux/uaccess.h>
#include <asm/mwait.h>
#include <asm/fpu/internal.h>
#include <asm/debugreg.h>
#include <asm/nmi.h>
#include <asm/tlbflush.h>
#include <asm/mce.h>
#include <asm/vm86.h>
#include <asm/switch_to.h>
#include <asm/desc.h>
#include <asm/prctl.h>
#include <asm/spec-ctrl.h>
#include <asm/io_bitmap.h>
#include <asm/proto.h>
#include <asm/frame.h>
#include "process.h"
/*
* per-CPU TSS segments. Threads are completely 'soft' on Linux,
* no more per-task TSS's. The TSS size is kept cacheline-aligned
* so they are allowed to end up in the .data..cacheline_aligned
* section. Since TSS's are completely CPU-local, we want them
* on exact cacheline boundaries, to eliminate cacheline ping-pong.
*/
__visible DEFINE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw) = {
.x86_tss = {
/*
* .sp0 is only used when entering ring 0 from a lower
* privilege level. Since the init task never runs anything
* but ring 0 code, there is no need for a valid value here.
* Poison it.
*/
.sp0 = (1UL << (BITS_PER_LONG-1)) + 1,
#ifdef CONFIG_X86_32
.sp1 = TOP_OF_INIT_STACK,
.ss0 = __KERNEL_DS,
.ss1 = __KERNEL_CS,
#endif
.io_bitmap_base = IO_BITMAP_OFFSET_INVALID,
},
};
EXPORT_PER_CPU_SYMBOL(cpu_tss_rw);
DEFINE_PER_CPU(bool, __tss_limit_invalid);
EXPORT_PER_CPU_SYMBOL_GPL(__tss_limit_invalid);
/*
* this gets called so that we can store lazy state into memory and copy the
* current task into the new thread.
*/
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
memcpy(dst, src, arch_task_struct_size);
#ifdef CONFIG_VM86
dst->thread.vm86 = NULL;
#endif
return fpu_clone(dst);
}
/*
* Free thread data structures etc..
*/
void exit_thread(struct task_struct *tsk)
{
struct thread_struct *t = &tsk->thread;
struct fpu *fpu = &t->fpu;
if (test_thread_flag(TIF_IO_BITMAP))
io_bitmap_exit(tsk);
free_vm86(t);
fpu__drop(fpu);
}
static int set_new_tls(struct task_struct *p, unsigned long tls)
{
struct user_desc __user *utls = (struct user_desc __user *)tls;
if (in_ia32_syscall())
return do_set_thread_area(p, -1, utls, 0);
else
return do_set_thread_area_64(p, ARCH_SET_FS, tls);
}
int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
struct task_struct *p, unsigned long tls)
{
struct inactive_task_frame *frame;
struct fork_frame *fork_frame;
struct pt_regs *childregs;
int ret = 0;
childregs = task_pt_regs(p);
fork_frame = container_of(childregs, struct fork_frame, regs);
frame = &fork_frame->frame;
frame->bp = encode_frame_pointer(childregs);
frame->ret_addr = (unsigned long) ret_from_fork;
p->thread.sp = (unsigned long) fork_frame;
p->thread.io_bitmap = NULL;
memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
#ifdef CONFIG_X86_64
current_save_fsgs();
p->thread.fsindex = current->thread.fsindex;
p->thread.fsbase = current->thread.fsbase;
p->thread.gsindex = current->thread.gsindex;
p->thread.gsbase = current->thread.gsbase;
savesegment(es, p->thread.es);
savesegment(ds, p->thread.ds);
#else
p->thread.sp0 = (unsigned long) (childregs + 1);
/*
* Clear all status flags including IF and set fixed bit. 64bit
* does not have this initialization as the frame does not contain
* flags. The flags consistency (especially vs. AC) is there
* ensured via objtool, which lacks 32bit support.
*/
frame->flags = X86_EFLAGS_FIXED;
#endif
/* Kernel thread ? */
if (unlikely(p->flags & PF_KTHREAD)) {
memset(childregs, 0, sizeof(struct pt_regs));
kthread_frame_init(frame, sp, arg);
return 0;
}
frame->bx = 0;
*childregs = *current_pt_regs();
childregs->ax = 0;
if (sp)
childregs->sp = sp;
#ifdef CONFIG_X86_32
task_user_gs(p) = get_user_gs(current_pt_regs());
#endif
if (unlikely(p->flags & PF_IO_WORKER)) {
/*
* An IO thread is a user space thread, but it doesn't
* return to ret_after_fork().
*
* In order to indicate that to tools like gdb,
* we reset the stack and instruction pointers.
*
* It does the same kernel frame setup to return to a kernel
* function that a kernel thread does.
*/
childregs->sp = 0;
childregs->ip = 0;
kthread_frame_init(frame, sp, arg);
return 0;
}
/* Set a new TLS for the child thread? */
if (clone_flags & CLONE_SETTLS)
ret = set_new_tls(p, tls);
if (!ret && unlikely(test_tsk_thread_flag(current, TIF_IO_BITMAP)))
io_bitmap_share(p);
return ret;
}
static void pkru_flush_thread(void)
{
/*
* If PKRU is enabled the default PKRU value has to be loaded into
* the hardware right here (similar to context switch).
*/
pkru_write_default();
}
void flush_thread(void)
{
struct task_struct *tsk = current;
flush_ptrace_hw_breakpoint(tsk);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
fpu_flush_thread();
pkru_flush_thread();
}
void disable_TSC(void)
{
preempt_disable();
if (!test_and_set_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
cr4_set_bits(X86_CR4_TSD);
preempt_enable();
}
static void enable_TSC(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOTSC))
/*
* Must flip the CPU state synchronously with
* TIF_NOTSC in the current running context.
*/
cr4_clear_bits(X86_CR4_TSD);
preempt_enable();
}
int get_tsc_mode(unsigned long adr)
{
unsigned int val;
if (test_thread_flag(TIF_NOTSC))
val = PR_TSC_SIGSEGV;
else
val = PR_TSC_ENABLE;
return put_user(val, (unsigned int __user *)adr);
}
int set_tsc_mode(unsigned int val)
{
if (val == PR_TSC_SIGSEGV)
disable_TSC();
else if (val == PR_TSC_ENABLE)
enable_TSC();
else
return -EINVAL;
return 0;
}
DEFINE_PER_CPU(u64, msr_misc_features_shadow);
static void set_cpuid_faulting(bool on)
{
u64 msrval;
msrval = this_cpu_read(msr_misc_features_shadow);
msrval &= ~MSR_MISC_FEATURES_ENABLES_CPUID_FAULT;
msrval |= (on << MSR_MISC_FEATURES_ENABLES_CPUID_FAULT_BIT);
this_cpu_write(msr_misc_features_shadow, msrval);
wrmsrl(MSR_MISC_FEATURES_ENABLES, msrval);
}
static void disable_cpuid(void)
{
preempt_disable();
if (!test_and_set_thread_flag(TIF_NOCPUID)) {
/*
* Must flip the CPU state synchronously with
* TIF_NOCPUID in the current running context.
*/
set_cpuid_faulting(true);
}
preempt_enable();
}
static void enable_cpuid(void)
{
preempt_disable();
if (test_and_clear_thread_flag(TIF_NOCPUID)) {
/*
* Must flip the CPU state synchronously with
* TIF_NOCPUID in the current running context.
*/
set_cpuid_faulting(false);
}
preempt_enable();
}
static int get_cpuid_mode(void)
{
return !test_thread_flag(TIF_NOCPUID);
}
static int set_cpuid_mode(struct task_struct *task, unsigned long cpuid_enabled)
{
if (!boot_cpu_has(X86_FEATURE_CPUID_FAULT))
return -ENODEV;
if (cpuid_enabled)
enable_cpuid();
else
disable_cpuid();
return 0;
}
/*
* Called immediately after a successful exec.
*/
void arch_setup_new_exec(void)
{
/* If cpuid was previously disabled for this task, re-enable it. */
if (test_thread_flag(TIF_NOCPUID))
enable_cpuid();
/*
* Don't inherit TIF_SSBD across exec boundary when
* PR_SPEC_DISABLE_NOEXEC is used.
*/
if (test_thread_flag(TIF_SSBD) &&
task_spec_ssb_noexec(current)) {
clear_thread_flag(TIF_SSBD);
task_clear_spec_ssb_disable(current);
task_clear_spec_ssb_noexec(current);
speculation_ctrl_update(task_thread_info(current)->flags);
}
}
#ifdef CONFIG_X86_IOPL_IOPERM
static inline void switch_to_bitmap(unsigned long tifp)
{
/*
* Invalidate I/O bitmap if the previous task used it. This prevents
* any possible leakage of an active I/O bitmap.
*
* If the next task has an I/O bitmap it will handle it on exit to
* user mode.
*/
if (tifp & _TIF_IO_BITMAP)
tss_invalidate_io_bitmap();
}
static void tss_copy_io_bitmap(struct tss_struct *tss, struct io_bitmap *iobm)
{
/*
* Copy at least the byte range of the incoming tasks bitmap which
* covers the permitted I/O ports.
*
* If the previous task which used an I/O bitmap had more bits
* permitted, then the copy needs to cover those as well so they
* get turned off.
*/
memcpy(tss->io_bitmap.bitmap, iobm->bitmap,
max(tss->io_bitmap.prev_max, iobm->max));
/*
* Store the new max and the sequence number of this bitmap
* and a pointer to the bitmap itself.
*/
tss->io_bitmap.prev_max = iobm->max;
tss->io_bitmap.prev_sequence = iobm->sequence;
}
/**
* tss_update_io_bitmap - Update I/O bitmap before exiting to usermode
*/
void native_tss_update_io_bitmap(void)
{
struct tss_struct *tss = this_cpu_ptr(&cpu_tss_rw);
struct thread_struct *t = &current->thread;
u16 *base = &tss->x86_tss.io_bitmap_base;
if (!test_thread_flag(TIF_IO_BITMAP)) {
native_tss_invalidate_io_bitmap();
return;
}
if (IS_ENABLED(CONFIG_X86_IOPL_IOPERM) && t->iopl_emul == 3) {
*base = IO_BITMAP_OFFSET_VALID_ALL;
} else {
struct io_bitmap *iobm = t->io_bitmap;
/*
* Only copy bitmap data when the sequence number differs. The
* update time is accounted to the incoming task.
*/
if (tss->io_bitmap.prev_sequence != iobm->sequence)
tss_copy_io_bitmap(tss, iobm);
/* Enable the bitmap */
*base = IO_BITMAP_OFFSET_VALID_MAP;
}
/*
* Make sure that the TSS limit is covering the IO bitmap. It might have
* been cut down by a VMEXIT to 0x67 which would cause a subsequent I/O
* access from user space to trigger a #GP because tbe bitmap is outside
* the TSS limit.
*/
refresh_tss_limit();
}
#else /* CONFIG_X86_IOPL_IOPERM */
static inline void switch_to_bitmap(unsigned long tifp) { }
#endif
#ifdef CONFIG_SMP
struct ssb_state {
struct ssb_state *shared_state;
raw_spinlock_t lock;
unsigned int disable_state;
unsigned long local_state;
};
#define LSTATE_SSB 0
static DEFINE_PER_CPU(struct ssb_state, ssb_state);
void speculative_store_bypass_ht_init(void)
{
struct ssb_state *st = this_cpu_ptr(&ssb_state);
unsigned int this_cpu = smp_processor_id();
unsigned int cpu;
st->local_state = 0;
/*
* Shared state setup happens once on the first bringup
* of the CPU. It's not destroyed on CPU hotunplug.
*/
if (st->shared_state)
return;
raw_spin_lock_init(&st->lock);
/*
* Go over HT siblings and check whether one of them has set up the
* shared state pointer already.
*/
for_each_cpu(cpu, topology_sibling_cpumask(this_cpu)) {
if (cpu == this_cpu)
continue;
if (!per_cpu(ssb_state, cpu).shared_state)
continue;
/* Link it to the state of the sibling: */
st->shared_state = per_cpu(ssb_state, cpu).shared_state;
return;
}
/*
* First HT sibling to come up on the core. Link shared state of
* the first HT sibling to itself. The siblings on the same core
* which come up later will see the shared state pointer and link
* themselves to the state of this CPU.
*/
st->shared_state = st;
}
/*
* Logic is: First HT sibling enables SSBD for both siblings in the core
* and last sibling to disable it, disables it for the whole core. This how
* MSR_SPEC_CTRL works in "hardware":
*
* CORE_SPEC_CTRL = THREAD0_SPEC_CTRL | THREAD1_SPEC_CTRL
*/
static __always_inline void amd_set_core_ssb_state(unsigned long tifn)
{
struct ssb_state *st = this_cpu_ptr(&ssb_state);
u64 msr = x86_amd_ls_cfg_base;
if (!static_cpu_has(X86_FEATURE_ZEN)) {
msr |= ssbd_tif_to_amd_ls_cfg(tifn);
wrmsrl(MSR_AMD64_LS_CFG, msr);
return;
}
if (tifn & _TIF_SSBD) {
/*
* Since this can race with prctl(), block reentry on the
* same CPU.
*/
if (__test_and_set_bit(LSTATE_SSB, &st->local_state))
return;
msr |= x86_amd_ls_cfg_ssbd_mask;
raw_spin_lock(&st->shared_state->lock);
/* First sibling enables SSBD: */
if (!st->shared_state->disable_state)
wrmsrl(MSR_AMD64_LS_CFG, msr);
st->shared_state->disable_state++;
raw_spin_unlock(&st->shared_state->lock);
} else {
if (!__test_and_clear_bit(LSTATE_SSB, &st->local_state))
return;
raw_spin_lock(&st->shared_state->lock);
st->shared_state->disable_state--;
if (!st->shared_state->disable_state)
wrmsrl(MSR_AMD64_LS_CFG, msr);
raw_spin_unlock(&st->shared_state->lock);
}
}
#else
static __always_inline void amd_set_core_ssb_state(unsigned long tifn)
{
u64 msr = x86_amd_ls_cfg_base | ssbd_tif_to_amd_ls_cfg(tifn);
wrmsrl(MSR_AMD64_LS_CFG, msr);
}
#endif
static __always_inline void amd_set_ssb_virt_state(unsigned long tifn)
{
/*
* SSBD has the same definition in SPEC_CTRL and VIRT_SPEC_CTRL,
* so ssbd_tif_to_spec_ctrl() just works.
*/
wrmsrl(MSR_AMD64_VIRT_SPEC_CTRL, ssbd_tif_to_spec_ctrl(tifn));
}
/*
* Update the MSRs managing speculation control, during context switch.
*
* tifp: Previous task's thread flags
* tifn: Next task's thread flags
*/
static __always_inline void __speculation_ctrl_update(unsigned long tifp,
unsigned long tifn)
{
unsigned long tif_diff = tifp ^ tifn;
u64 msr = x86_spec_ctrl_base;
bool updmsr = false;
lockdep_assert_irqs_disabled();
/* Handle change of TIF_SSBD depending on the mitigation method. */
if (static_cpu_has(X86_FEATURE_VIRT_SSBD)) {
if (tif_diff & _TIF_SSBD)
amd_set_ssb_virt_state(tifn);
} else if (static_cpu_has(X86_FEATURE_LS_CFG_SSBD)) {
if (tif_diff & _TIF_SSBD)
amd_set_core_ssb_state(tifn);
} else if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) ||
static_cpu_has(X86_FEATURE_AMD_SSBD)) {
updmsr |= !!(tif_diff & _TIF_SSBD);
msr |= ssbd_tif_to_spec_ctrl(tifn);
}
/* Only evaluate TIF_SPEC_IB if conditional STIBP is enabled. */
if (IS_ENABLED(CONFIG_SMP) &&
static_branch_unlikely(&switch_to_cond_stibp)) {
updmsr |= !!(tif_diff & _TIF_SPEC_IB);
msr |= stibp_tif_to_spec_ctrl(tifn);
}
if (updmsr)
wrmsrl(MSR_IA32_SPEC_CTRL, msr);
}
static unsigned long speculation_ctrl_update_tif(struct task_struct *tsk)
{
if (test_and_clear_tsk_thread_flag(tsk, TIF_SPEC_FORCE_UPDATE)) {
if (task_spec_ssb_disable(tsk))
set_tsk_thread_flag(tsk, TIF_SSBD);
else
clear_tsk_thread_flag(tsk, TIF_SSBD);
if (task_spec_ib_disable(tsk))
set_tsk_thread_flag(tsk, TIF_SPEC_IB);
else
clear_tsk_thread_flag(tsk, TIF_SPEC_IB);
}
/* Return the updated threadinfo flags*/
return task_thread_info(tsk)->flags;
}
void speculation_ctrl_update(unsigned long tif)
{
unsigned long flags;
/* Forced update. Make sure all relevant TIF flags are different */
local_irq_save(flags);
__speculation_ctrl_update(~tif, tif);
local_irq_restore(flags);
}
/* Called from seccomp/prctl update */
void speculation_ctrl_update_current(void)
{
preempt_disable();
speculation_ctrl_update(speculation_ctrl_update_tif(current));
preempt_enable();
}
static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
{
unsigned long newval, cr4 = this_cpu_read(cpu_tlbstate.cr4);
newval = cr4 ^ mask;
if (newval != cr4) {
this_cpu_write(cpu_tlbstate.cr4, newval);
__write_cr4(newval);
}
}
void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
{
unsigned long tifp, tifn;
tifn = READ_ONCE(task_thread_info(next_p)->flags);
tifp = READ_ONCE(task_thread_info(prev_p)->flags);
switch_to_bitmap(tifp);
propagate_user_return_notify(prev_p, next_p);
if ((tifp & _TIF_BLOCKSTEP || tifn & _TIF_BLOCKSTEP) &&
arch_has_block_step()) {
unsigned long debugctl, msk;
rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
debugctl &= ~DEBUGCTLMSR_BTF;
msk = tifn & _TIF_BLOCKSTEP;
debugctl |= (msk >> TIF_BLOCKSTEP) << DEBUGCTLMSR_BTF_SHIFT;
wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
}
if ((tifp ^ tifn) & _TIF_NOTSC)
cr4_toggle_bits_irqsoff(X86_CR4_TSD);
if ((tifp ^ tifn) & _TIF_NOCPUID)
set_cpuid_faulting(!!(tifn & _TIF_NOCPUID));
if (likely(!((tifp | tifn) & _TIF_SPEC_FORCE_UPDATE))) {
__speculation_ctrl_update(tifp, tifn);
} else {
speculation_ctrl_update_tif(prev_p);
tifn = speculation_ctrl_update_tif(next_p);
/* Enforce MSR update to ensure consistent state */
__speculation_ctrl_update(~tifn, tifn);
}
if ((tifp ^ tifn) & _TIF_SLD)
switch_to_sld(tifn);
}
/*
* Idle related variables and functions
*/
unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
EXPORT_SYMBOL(boot_option_idle_override);
static void (*x86_idle)(void);
#ifndef CONFIG_SMP
static inline void play_dead(void)
{
BUG();
}
#endif
void arch_cpu_idle_enter(void)
{
tsc_verify_tsc_adjust(false);
local_touch_nmi();
}
void arch_cpu_idle_dead(void)
{
play_dead();
}
/*
* Called from the generic idle code.
*/
void arch_cpu_idle(void)
{
x86_idle();
}
/*
* We use this if we don't have any better idle routine..
*/
void __cpuidle default_idle(void)
{
raw_safe_halt();
}
#if defined(CONFIG_APM_MODULE) || defined(CONFIG_HALTPOLL_CPUIDLE_MODULE)
EXPORT_SYMBOL(default_idle);
#endif
#ifdef CONFIG_XEN
bool xen_set_default_idle(void)
{
bool ret = !!x86_idle;
x86_idle = default_idle;
return ret;
}
#endif
void stop_this_cpu(void *dummy)
{
local_irq_disable();
/*
* Remove this CPU:
*/
set_cpu_online(smp_processor_id(), false);
disable_local_APIC();
mcheck_cpu_clear(this_cpu_ptr(&cpu_info));
/*
* Use wbinvd on processors that support SME. This provides support
* for performing a successful kexec when going from SME inactive
* to SME active (or vice-versa). The cache must be cleared so that
* if there are entries with the same physical address, both with and
* without the encryption bit, they don't race each other when flushed
* and potentially end up with the wrong entry being committed to
* memory.
*/
if (boot_cpu_has(X86_FEATURE_SME))
native_wbinvd();
for (;;) {
/*
* Use native_halt() so that memory contents don't change
* (stack usage and variables) after possibly issuing the
* native_wbinvd() above.
*/
native_halt();
}
}
/*
* AMD Erratum 400 aware idle routine. We handle it the same way as C3 power
* states (local apic timer and TSC stop).
*
* XXX this function is completely buggered vs RCU and tracing.
*/
static void amd_e400_idle(void)
{
/*
* We cannot use static_cpu_has_bug() here because X86_BUG_AMD_APIC_C1E
* gets set after static_cpu_has() places have been converted via
* alternatives.
*/
if (!boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
default_idle();
return;
}
tick_broadcast_enter();
default_idle();
/*
* The switch back from broadcast mode needs to be called with
* interrupts disabled.
*/
raw_local_irq_disable();
tick_broadcast_exit();
raw_local_irq_enable();
}
/*
* Intel Core2 and older machines prefer MWAIT over HALT for C1.
* We can't rely on cpuidle installing MWAIT, because it will not load
* on systems that support only C1 -- so the boot default must be MWAIT.
*
* Some AMD machines are the opposite, they depend on using HALT.
*
* So for default C1, which is used during boot until cpuidle loads,
* use MWAIT-C1 on Intel HW that has it, else use HALT.
*/
static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
{
if (c->x86_vendor != X86_VENDOR_INTEL)
return 0;
if (!cpu_has(c, X86_FEATURE_MWAIT) || boot_cpu_has_bug(X86_BUG_MONITOR))
return 0;
return 1;
}
/*
* MONITOR/MWAIT with no hints, used for default C1 state. This invokes MWAIT
* with interrupts enabled and no flags, which is backwards compatible with the
* original MWAIT implementation.
*/
static __cpuidle void mwait_idle(void)
{
if (!current_set_polling_and_test()) {
if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) {
mb(); /* quirk */
clflush((void *)&current_thread_info()->flags);
mb(); /* quirk */
}
__monitor((void *)&current_thread_info()->flags, 0, 0);
if (!need_resched())
__sti_mwait(0, 0);
else
raw_local_irq_enable();
} else {
raw_local_irq_enable();
}
__current_clr_polling();
}
void select_idle_routine(const struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
if (boot_option_idle_override == IDLE_POLL && smp_num_siblings > 1)
pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n");
#endif
if (x86_idle || boot_option_idle_override == IDLE_POLL)
return;
if (boot_cpu_has_bug(X86_BUG_AMD_E400)) {
pr_info("using AMD E400 aware idle routine\n");
x86_idle = amd_e400_idle;
} else if (prefer_mwait_c1_over_halt(c)) {
pr_info("using mwait in idle threads\n");
x86_idle = mwait_idle;
} else
x86_idle = default_idle;
}
void amd_e400_c1e_apic_setup(void)
{
if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E)) {
pr_info("Switch to broadcast mode on CPU%d\n", smp_processor_id());
local_irq_disable();
tick_broadcast_force();
local_irq_enable();
}
}
void __init arch_post_acpi_subsys_init(void)
{
u32 lo, hi;
if (!boot_cpu_has_bug(X86_BUG_AMD_E400))
return;
/*
* AMD E400 detection needs to happen after ACPI has been enabled. If
* the machine is affected K8_INTP_C1E_ACTIVE_MASK bits are set in
* MSR_K8_INT_PENDING_MSG.
*/
rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
if (!(lo & K8_INTP_C1E_ACTIVE_MASK))
return;
boot_cpu_set_bug(X86_BUG_AMD_APIC_C1E);
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halt in AMD C1E");
pr_info("System has AMD C1E enabled\n");
}
static int __init idle_setup(char *str)
{
if (!str)
return -EINVAL;
if (!strcmp(str, "poll")) {
pr_info("using polling idle threads\n");
boot_option_idle_override = IDLE_POLL;
cpu_idle_poll_ctrl(true);
} else if (!strcmp(str, "halt")) {
/*
* When the boot option of idle=halt is added, halt is
* forced to be used for CPU idle. In such case CPU C2/C3
* won't be used again.
* To continue to load the CPU idle driver, don't touch
* the boot_option_idle_override.
*/
x86_idle = default_idle;
boot_option_idle_override = IDLE_HALT;
} else if (!strcmp(str, "nomwait")) {
/*
* If the boot option of "idle=nomwait" is added,
* it means that mwait will be disabled for CPU C2/C3
* states. In such case it won't touch the variable
* of boot_option_idle_override.
*/
boot_option_idle_override = IDLE_NOMWAIT;
} else
return -1;
return 0;
}
early_param("idle", idle_setup);
unsigned long arch_align_stack(unsigned long sp)
{
if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
sp -= get_random_int() % 8192;
return sp & ~0xf;
}
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
return randomize_page(mm->brk, 0x02000000);
}
/*
* Called from fs/proc with a reference on @p to find the function
* which called into schedule(). This needs to be done carefully
* because the task might wake up and we might look at a stack
* changing under us.
*/
unsigned long get_wchan(struct task_struct *p)
{
unsigned long start, bottom, top, sp, fp, ip, ret = 0;
int count = 0;
if (p == current || p->state == TASK_RUNNING)
return 0;
if (!try_get_task_stack(p))
return 0;
start = (unsigned long)task_stack_page(p);
if (!start)
goto out;
/*
* Layout of the stack page:
*
* ----------- topmax = start + THREAD_SIZE - sizeof(unsigned long)
* PADDING
* ----------- top = topmax - TOP_OF_KERNEL_STACK_PADDING
* stack
* ----------- bottom = start
*
* The tasks stack pointer points at the location where the
* framepointer is stored. The data on the stack is:
* ... IP FP ... IP FP
*
* We need to read FP and IP, so we need to adjust the upper
* bound by another unsigned long.
*/
top = start + THREAD_SIZE - TOP_OF_KERNEL_STACK_PADDING;
top -= 2 * sizeof(unsigned long);
bottom = start;
sp = READ_ONCE(p->thread.sp);
if (sp < bottom || sp > top)
goto out;
fp = READ_ONCE_NOCHECK(((struct inactive_task_frame *)sp)->bp);
do {
if (fp < bottom || fp > top)
goto out;
ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long)));
if (!in_sched_functions(ip)) {
ret = ip;
goto out;
}
fp = READ_ONCE_NOCHECK(*(unsigned long *)fp);
} while (count++ < 16 && p->state != TASK_RUNNING);
out:
put_task_stack(p);
return ret;
}
long do_arch_prctl_common(struct task_struct *task, int option,
unsigned long cpuid_enabled)
{
switch (option) {
case ARCH_GET_CPUID:
return get_cpuid_mode();
case ARCH_SET_CPUID:
return set_cpuid_mode(task, cpuid_enabled);
}
return -EINVAL;
}