mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN R8heV6GX5OzlFLGX2tKK =fJ5x -----END PGP SIGNATURE----- Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
1917 lines
63 KiB
C
1917 lines
63 KiB
C
/*
|
|
* pci.h
|
|
*
|
|
* PCI defines and function prototypes
|
|
* Copyright 1994, Drew Eckhardt
|
|
* Copyright 1997--1999 Martin Mares <mj@ucw.cz>
|
|
*
|
|
* For more information, please consult the following manuals (look at
|
|
* http://www.pcisig.com/ for how to get them):
|
|
*
|
|
* PCI BIOS Specification
|
|
* PCI Local Bus Specification
|
|
* PCI to PCI Bridge Specification
|
|
* PCI System Design Guide
|
|
*/
|
|
#ifndef LINUX_PCI_H
|
|
#define LINUX_PCI_H
|
|
|
|
|
|
#include <linux/mod_devicetable.h>
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/list.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kobject.h>
|
|
#include <linux/atomic.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irqreturn.h>
|
|
#include <uapi/linux/pci.h>
|
|
|
|
/* Include the ID list */
|
|
#include <linux/pci_ids.h>
|
|
|
|
/*
|
|
* The PCI interface treats multi-function devices as independent
|
|
* devices. The slot/function address of each device is encoded
|
|
* in a single byte as follows:
|
|
*
|
|
* 7:3 = slot
|
|
* 2:0 = function
|
|
* PCI_DEVFN(), PCI_SLOT(), and PCI_FUNC() are defined uapi/linux/pci.h
|
|
* In the interest of not exposing interfaces to user-space unnecessarily,
|
|
* the following kernel only defines are being added here.
|
|
*/
|
|
#define PCI_DEVID(bus, devfn) ((((u16)bus) << 8) | devfn)
|
|
/* return bus from PCI devid = ((u16)bus_number) << 8) | devfn */
|
|
#define PCI_BUS_NUM(x) (((x) >> 8) & 0xff)
|
|
|
|
/* pci_slot represents a physical slot */
|
|
struct pci_slot {
|
|
struct pci_bus *bus; /* The bus this slot is on */
|
|
struct list_head list; /* node in list of slots on this bus */
|
|
struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */
|
|
unsigned char number; /* PCI_SLOT(pci_dev->devfn) */
|
|
struct kobject kobj;
|
|
};
|
|
|
|
static inline const char *pci_slot_name(const struct pci_slot *slot)
|
|
{
|
|
return kobject_name(&slot->kobj);
|
|
}
|
|
|
|
/* File state for mmap()s on /proc/bus/pci/X/Y */
|
|
enum pci_mmap_state {
|
|
pci_mmap_io,
|
|
pci_mmap_mem
|
|
};
|
|
|
|
/* This defines the direction arg to the DMA mapping routines. */
|
|
#define PCI_DMA_BIDIRECTIONAL 0
|
|
#define PCI_DMA_TODEVICE 1
|
|
#define PCI_DMA_FROMDEVICE 2
|
|
#define PCI_DMA_NONE 3
|
|
|
|
/*
|
|
* For PCI devices, the region numbers are assigned this way:
|
|
*/
|
|
enum {
|
|
/* #0-5: standard PCI resources */
|
|
PCI_STD_RESOURCES,
|
|
PCI_STD_RESOURCE_END = 5,
|
|
|
|
/* #6: expansion ROM resource */
|
|
PCI_ROM_RESOURCE,
|
|
|
|
/* device specific resources */
|
|
#ifdef CONFIG_PCI_IOV
|
|
PCI_IOV_RESOURCES,
|
|
PCI_IOV_RESOURCE_END = PCI_IOV_RESOURCES + PCI_SRIOV_NUM_BARS - 1,
|
|
#endif
|
|
|
|
/* resources assigned to buses behind the bridge */
|
|
#define PCI_BRIDGE_RESOURCE_NUM 4
|
|
|
|
PCI_BRIDGE_RESOURCES,
|
|
PCI_BRIDGE_RESOURCE_END = PCI_BRIDGE_RESOURCES +
|
|
PCI_BRIDGE_RESOURCE_NUM - 1,
|
|
|
|
/* total resources associated with a PCI device */
|
|
PCI_NUM_RESOURCES,
|
|
|
|
/* preserve this for compatibility */
|
|
DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
|
|
};
|
|
|
|
typedef int __bitwise pci_power_t;
|
|
|
|
#define PCI_D0 ((pci_power_t __force) 0)
|
|
#define PCI_D1 ((pci_power_t __force) 1)
|
|
#define PCI_D2 ((pci_power_t __force) 2)
|
|
#define PCI_D3hot ((pci_power_t __force) 3)
|
|
#define PCI_D3cold ((pci_power_t __force) 4)
|
|
#define PCI_UNKNOWN ((pci_power_t __force) 5)
|
|
#define PCI_POWER_ERROR ((pci_power_t __force) -1)
|
|
|
|
/* Remember to update this when the list above changes! */
|
|
extern const char *pci_power_names[];
|
|
|
|
static inline const char *pci_power_name(pci_power_t state)
|
|
{
|
|
return pci_power_names[1 + (int) state];
|
|
}
|
|
|
|
#define PCI_PM_D2_DELAY 200
|
|
#define PCI_PM_D3_WAIT 10
|
|
#define PCI_PM_D3COLD_WAIT 100
|
|
#define PCI_PM_BUS_WAIT 50
|
|
|
|
/** The pci_channel state describes connectivity between the CPU and
|
|
* the pci device. If some PCI bus between here and the pci device
|
|
* has crashed or locked up, this info is reflected here.
|
|
*/
|
|
typedef unsigned int __bitwise pci_channel_state_t;
|
|
|
|
enum pci_channel_state {
|
|
/* I/O channel is in normal state */
|
|
pci_channel_io_normal = (__force pci_channel_state_t) 1,
|
|
|
|
/* I/O to channel is blocked */
|
|
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
|
|
|
|
/* PCI card is dead */
|
|
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
|
|
};
|
|
|
|
typedef unsigned int __bitwise pcie_reset_state_t;
|
|
|
|
enum pcie_reset_state {
|
|
/* Reset is NOT asserted (Use to deassert reset) */
|
|
pcie_deassert_reset = (__force pcie_reset_state_t) 1,
|
|
|
|
/* Use #PERST to reset PCI-E device */
|
|
pcie_warm_reset = (__force pcie_reset_state_t) 2,
|
|
|
|
/* Use PCI-E Hot Reset to reset device */
|
|
pcie_hot_reset = (__force pcie_reset_state_t) 3
|
|
};
|
|
|
|
typedef unsigned short __bitwise pci_dev_flags_t;
|
|
enum pci_dev_flags {
|
|
/* INTX_DISABLE in PCI_COMMAND register disables MSI
|
|
* generation too.
|
|
*/
|
|
PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
|
|
/* Device configuration is irrevocably lost if disabled into D3 */
|
|
PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
|
|
/* Provide indication device is assigned by a Virtual Machine Manager */
|
|
PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
|
|
};
|
|
|
|
enum pci_irq_reroute_variant {
|
|
INTEL_IRQ_REROUTE_VARIANT = 1,
|
|
MAX_IRQ_REROUTE_VARIANTS = 3
|
|
};
|
|
|
|
typedef unsigned short __bitwise pci_bus_flags_t;
|
|
enum pci_bus_flags {
|
|
PCI_BUS_FLAGS_NO_MSI = (__force pci_bus_flags_t) 1,
|
|
PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
|
|
};
|
|
|
|
/* These values come from the PCI Express Spec */
|
|
enum pcie_link_width {
|
|
PCIE_LNK_WIDTH_RESRV = 0x00,
|
|
PCIE_LNK_X1 = 0x01,
|
|
PCIE_LNK_X2 = 0x02,
|
|
PCIE_LNK_X4 = 0x04,
|
|
PCIE_LNK_X8 = 0x08,
|
|
PCIE_LNK_X12 = 0x0C,
|
|
PCIE_LNK_X16 = 0x10,
|
|
PCIE_LNK_X32 = 0x20,
|
|
PCIE_LNK_WIDTH_UNKNOWN = 0xFF,
|
|
};
|
|
|
|
/* Based on the PCI Hotplug Spec, but some values are made up by us */
|
|
enum pci_bus_speed {
|
|
PCI_SPEED_33MHz = 0x00,
|
|
PCI_SPEED_66MHz = 0x01,
|
|
PCI_SPEED_66MHz_PCIX = 0x02,
|
|
PCI_SPEED_100MHz_PCIX = 0x03,
|
|
PCI_SPEED_133MHz_PCIX = 0x04,
|
|
PCI_SPEED_66MHz_PCIX_ECC = 0x05,
|
|
PCI_SPEED_100MHz_PCIX_ECC = 0x06,
|
|
PCI_SPEED_133MHz_PCIX_ECC = 0x07,
|
|
PCI_SPEED_66MHz_PCIX_266 = 0x09,
|
|
PCI_SPEED_100MHz_PCIX_266 = 0x0a,
|
|
PCI_SPEED_133MHz_PCIX_266 = 0x0b,
|
|
AGP_UNKNOWN = 0x0c,
|
|
AGP_1X = 0x0d,
|
|
AGP_2X = 0x0e,
|
|
AGP_4X = 0x0f,
|
|
AGP_8X = 0x10,
|
|
PCI_SPEED_66MHz_PCIX_533 = 0x11,
|
|
PCI_SPEED_100MHz_PCIX_533 = 0x12,
|
|
PCI_SPEED_133MHz_PCIX_533 = 0x13,
|
|
PCIE_SPEED_2_5GT = 0x14,
|
|
PCIE_SPEED_5_0GT = 0x15,
|
|
PCIE_SPEED_8_0GT = 0x16,
|
|
PCI_SPEED_UNKNOWN = 0xff,
|
|
};
|
|
|
|
struct pci_cap_saved_data {
|
|
char cap_nr;
|
|
unsigned int size;
|
|
u32 data[0];
|
|
};
|
|
|
|
struct pci_cap_saved_state {
|
|
struct hlist_node next;
|
|
struct pci_cap_saved_data cap;
|
|
};
|
|
|
|
struct pcie_link_state;
|
|
struct pci_vpd;
|
|
struct pci_sriov;
|
|
struct pci_ats;
|
|
|
|
/*
|
|
* The pci_dev structure is used to describe PCI devices.
|
|
*/
|
|
struct pci_dev {
|
|
struct list_head bus_list; /* node in per-bus list */
|
|
struct pci_bus *bus; /* bus this device is on */
|
|
struct pci_bus *subordinate; /* bus this device bridges to */
|
|
|
|
void *sysdata; /* hook for sys-specific extension */
|
|
struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
|
|
struct pci_slot *slot; /* Physical slot this device is in */
|
|
|
|
unsigned int devfn; /* encoded device & function index */
|
|
unsigned short vendor;
|
|
unsigned short device;
|
|
unsigned short subsystem_vendor;
|
|
unsigned short subsystem_device;
|
|
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
|
|
u8 revision; /* PCI revision, low byte of class word */
|
|
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
|
|
u8 pcie_cap; /* PCI-E capability offset */
|
|
u8 msi_cap; /* MSI capability offset */
|
|
u8 msix_cap; /* MSI-X capability offset */
|
|
u8 pcie_mpss:3; /* PCI-E Max Payload Size Supported */
|
|
u8 rom_base_reg; /* which config register controls the ROM */
|
|
u8 pin; /* which interrupt pin this device uses */
|
|
u16 pcie_flags_reg; /* cached PCI-E Capabilities Register */
|
|
|
|
struct pci_driver *driver; /* which driver has allocated this device */
|
|
u64 dma_mask; /* Mask of the bits of bus address this
|
|
device implements. Normally this is
|
|
0xffffffff. You only need to change
|
|
this if your device has broken DMA
|
|
or supports 64-bit transfers. */
|
|
|
|
struct device_dma_parameters dma_parms;
|
|
|
|
pci_power_t current_state; /* Current operating state. In ACPI-speak,
|
|
this is D0-D3, D0 being fully functional,
|
|
and D3 being off. */
|
|
u8 pm_cap; /* PM capability offset */
|
|
unsigned int pme_support:5; /* Bitmask of states from which PME#
|
|
can be generated */
|
|
unsigned int pme_interrupt:1;
|
|
unsigned int pme_poll:1; /* Poll device's PME status bit */
|
|
unsigned int d1_support:1; /* Low power state D1 is supported */
|
|
unsigned int d2_support:1; /* Low power state D2 is supported */
|
|
unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
|
|
unsigned int no_d3cold:1; /* D3cold is forbidden */
|
|
unsigned int d3cold_allowed:1; /* D3cold is allowed by user */
|
|
unsigned int mmio_always_on:1; /* disallow turning off io/mem
|
|
decoding during bar sizing */
|
|
unsigned int wakeup_prepared:1;
|
|
unsigned int runtime_d3cold:1; /* whether go through runtime
|
|
D3cold, not set for devices
|
|
powered on/off by the
|
|
corresponding bridge */
|
|
unsigned int d3_delay; /* D3->D0 transition time in ms */
|
|
unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
|
|
|
|
#ifdef CONFIG_PCIEASPM
|
|
struct pcie_link_state *link_state; /* ASPM link state. */
|
|
#endif
|
|
|
|
pci_channel_state_t error_state; /* current connectivity state */
|
|
struct device dev; /* Generic device interface */
|
|
|
|
int cfg_size; /* Size of configuration space */
|
|
|
|
/*
|
|
* Instead of touching interrupt line and base address registers
|
|
* directly, use the values stored here. They might be different!
|
|
*/
|
|
unsigned int irq;
|
|
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
|
|
|
|
bool match_driver; /* Skip attaching driver */
|
|
/* These fields are used by common fixups */
|
|
unsigned int transparent:1; /* Transparent PCI bridge */
|
|
unsigned int multifunction:1;/* Part of multi-function device */
|
|
/* keep track of device state */
|
|
unsigned int is_added:1;
|
|
unsigned int is_busmaster:1; /* device is busmaster */
|
|
unsigned int no_msi:1; /* device may not use msi */
|
|
unsigned int block_cfg_access:1; /* config space access is blocked */
|
|
unsigned int broken_parity_status:1; /* Device generates false positive parity */
|
|
unsigned int irq_reroute_variant:2; /* device needs IRQ rerouting variant */
|
|
unsigned int msi_enabled:1;
|
|
unsigned int msix_enabled:1;
|
|
unsigned int ari_enabled:1; /* ARI forwarding */
|
|
unsigned int is_managed:1;
|
|
unsigned int is_pcie:1; /* Obsolete. Will be removed.
|
|
Use pci_is_pcie() instead */
|
|
unsigned int needs_freset:1; /* Dev requires fundamental reset */
|
|
unsigned int state_saved:1;
|
|
unsigned int is_physfn:1;
|
|
unsigned int is_virtfn:1;
|
|
unsigned int reset_fn:1;
|
|
unsigned int is_hotplug_bridge:1;
|
|
unsigned int __aer_firmware_first_valid:1;
|
|
unsigned int __aer_firmware_first:1;
|
|
unsigned int broken_intx_masking:1;
|
|
unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */
|
|
pci_dev_flags_t dev_flags;
|
|
atomic_t enable_cnt; /* pci_enable_device has been called */
|
|
|
|
u32 saved_config_space[16]; /* config space saved at suspend time */
|
|
struct hlist_head saved_cap_space;
|
|
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
|
|
int rom_attr_enabled; /* has display of the rom attribute been enabled? */
|
|
struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
|
|
struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
|
|
#ifdef CONFIG_PCI_MSI
|
|
struct list_head msi_list;
|
|
struct kset *msi_kset;
|
|
#endif
|
|
struct pci_vpd *vpd;
|
|
#ifdef CONFIG_PCI_ATS
|
|
union {
|
|
struct pci_sriov *sriov; /* SR-IOV capability related */
|
|
struct pci_dev *physfn; /* the PF this VF is associated with */
|
|
};
|
|
struct pci_ats *ats; /* Address Translation Service */
|
|
#endif
|
|
phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */
|
|
size_t romlen; /* Length of ROM if it's not from the BAR */
|
|
};
|
|
|
|
static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
|
|
{
|
|
#ifdef CONFIG_PCI_IOV
|
|
if (dev->is_virtfn)
|
|
dev = dev->physfn;
|
|
#endif
|
|
|
|
return dev;
|
|
}
|
|
|
|
struct pci_dev *pci_alloc_dev(struct pci_bus *bus);
|
|
struct pci_dev * __deprecated alloc_pci_dev(void);
|
|
|
|
#define to_pci_dev(n) container_of(n, struct pci_dev, dev)
|
|
#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
|
|
|
|
static inline int pci_channel_offline(struct pci_dev *pdev)
|
|
{
|
|
return (pdev->error_state != pci_channel_io_normal);
|
|
}
|
|
|
|
extern struct resource busn_resource;
|
|
|
|
struct pci_host_bridge_window {
|
|
struct list_head list;
|
|
struct resource *res; /* host bridge aperture (CPU address) */
|
|
resource_size_t offset; /* bus address + offset = CPU address */
|
|
};
|
|
|
|
struct pci_host_bridge {
|
|
struct device dev;
|
|
struct pci_bus *bus; /* root bus */
|
|
struct list_head windows; /* pci_host_bridge_windows */
|
|
void (*release_fn)(struct pci_host_bridge *);
|
|
void *release_data;
|
|
};
|
|
|
|
#define to_pci_host_bridge(n) container_of(n, struct pci_host_bridge, dev)
|
|
void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
|
|
void (*release_fn)(struct pci_host_bridge *),
|
|
void *release_data);
|
|
|
|
int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge);
|
|
|
|
/*
|
|
* The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
|
|
* to P2P or CardBus bridge windows) go in a table. Additional ones (for
|
|
* buses below host bridges or subtractive decode bridges) go in the list.
|
|
* Use pci_bus_for_each_resource() to iterate through all the resources.
|
|
*/
|
|
|
|
/*
|
|
* PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly
|
|
* and there's no way to program the bridge with the details of the window.
|
|
* This does not apply to ACPI _CRS windows, even with the _DEC subtractive-
|
|
* decode bit set, because they are explicit and can be programmed with _SRS.
|
|
*/
|
|
#define PCI_SUBTRACTIVE_DECODE 0x1
|
|
|
|
struct pci_bus_resource {
|
|
struct list_head list;
|
|
struct resource *res;
|
|
unsigned int flags;
|
|
};
|
|
|
|
#define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */
|
|
|
|
struct pci_bus {
|
|
struct list_head node; /* node in list of buses */
|
|
struct pci_bus *parent; /* parent bus this bridge is on */
|
|
struct list_head children; /* list of child buses */
|
|
struct list_head devices; /* list of devices on this bus */
|
|
struct pci_dev *self; /* bridge device as seen by parent */
|
|
struct list_head slots; /* list of slots on this bus */
|
|
struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
|
|
struct list_head resources; /* address space routed to this bus */
|
|
struct resource busn_res; /* bus numbers routed to this bus */
|
|
|
|
struct pci_ops *ops; /* configuration access functions */
|
|
struct msi_chip *msi; /* MSI controller */
|
|
void *sysdata; /* hook for sys-specific extension */
|
|
struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */
|
|
|
|
unsigned char number; /* bus number */
|
|
unsigned char primary; /* number of primary bridge */
|
|
unsigned char max_bus_speed; /* enum pci_bus_speed */
|
|
unsigned char cur_bus_speed; /* enum pci_bus_speed */
|
|
|
|
char name[48];
|
|
|
|
unsigned short bridge_ctl; /* manage NO_ISA/FBB/et al behaviors */
|
|
pci_bus_flags_t bus_flags; /* Inherited by child busses */
|
|
struct device *bridge;
|
|
struct device dev;
|
|
struct bin_attribute *legacy_io; /* legacy I/O for this bus */
|
|
struct bin_attribute *legacy_mem; /* legacy mem */
|
|
unsigned int is_added:1;
|
|
};
|
|
|
|
#define pci_bus_b(n) list_entry(n, struct pci_bus, node)
|
|
#define to_pci_bus(n) container_of(n, struct pci_bus, dev)
|
|
|
|
/*
|
|
* Returns true if the pci bus is root (behind host-pci bridge),
|
|
* false otherwise
|
|
*/
|
|
static inline bool pci_is_root_bus(struct pci_bus *pbus)
|
|
{
|
|
return !(pbus->parent);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev)
|
|
{
|
|
return pci_dev->msi_enabled || pci_dev->msix_enabled;
|
|
}
|
|
#else
|
|
static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; }
|
|
#endif
|
|
|
|
/*
|
|
* Error values that may be returned by PCI functions.
|
|
*/
|
|
#define PCIBIOS_SUCCESSFUL 0x00
|
|
#define PCIBIOS_FUNC_NOT_SUPPORTED 0x81
|
|
#define PCIBIOS_BAD_VENDOR_ID 0x83
|
|
#define PCIBIOS_DEVICE_NOT_FOUND 0x86
|
|
#define PCIBIOS_BAD_REGISTER_NUMBER 0x87
|
|
#define PCIBIOS_SET_FAILED 0x88
|
|
#define PCIBIOS_BUFFER_TOO_SMALL 0x89
|
|
|
|
/*
|
|
* Translate above to generic errno for passing back through non-pci.
|
|
*/
|
|
static inline int pcibios_err_to_errno(int err)
|
|
{
|
|
if (err <= PCIBIOS_SUCCESSFUL)
|
|
return err; /* Assume already errno */
|
|
|
|
switch (err) {
|
|
case PCIBIOS_FUNC_NOT_SUPPORTED:
|
|
return -ENOENT;
|
|
case PCIBIOS_BAD_VENDOR_ID:
|
|
return -EINVAL;
|
|
case PCIBIOS_DEVICE_NOT_FOUND:
|
|
return -ENODEV;
|
|
case PCIBIOS_BAD_REGISTER_NUMBER:
|
|
return -EFAULT;
|
|
case PCIBIOS_SET_FAILED:
|
|
return -EIO;
|
|
case PCIBIOS_BUFFER_TOO_SMALL:
|
|
return -ENOSPC;
|
|
}
|
|
|
|
return -ENOTTY;
|
|
}
|
|
|
|
/* Low-level architecture-dependent routines */
|
|
|
|
struct pci_ops {
|
|
int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
|
|
int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
|
|
};
|
|
|
|
/*
|
|
* ACPI needs to be able to access PCI config space before we've done a
|
|
* PCI bus scan and created pci_bus structures.
|
|
*/
|
|
int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
|
|
int reg, int len, u32 *val);
|
|
int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
|
|
int reg, int len, u32 val);
|
|
|
|
struct pci_bus_region {
|
|
resource_size_t start;
|
|
resource_size_t end;
|
|
};
|
|
|
|
struct pci_dynids {
|
|
spinlock_t lock; /* protects list, index */
|
|
struct list_head list; /* for IDs added at runtime */
|
|
};
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
/** PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
|
|
* a set of callbacks in struct pci_error_handlers, then that device driver
|
|
* will be notified of PCI bus errors, and will be driven to recovery
|
|
* when an error occurs.
|
|
*/
|
|
|
|
typedef unsigned int __bitwise pci_ers_result_t;
|
|
|
|
enum pci_ers_result {
|
|
/* no result/none/not supported in device driver */
|
|
PCI_ERS_RESULT_NONE = (__force pci_ers_result_t) 1,
|
|
|
|
/* Device driver can recover without slot reset */
|
|
PCI_ERS_RESULT_CAN_RECOVER = (__force pci_ers_result_t) 2,
|
|
|
|
/* Device driver wants slot to be reset. */
|
|
PCI_ERS_RESULT_NEED_RESET = (__force pci_ers_result_t) 3,
|
|
|
|
/* Device has completely failed, is unrecoverable */
|
|
PCI_ERS_RESULT_DISCONNECT = (__force pci_ers_result_t) 4,
|
|
|
|
/* Device driver is fully recovered and operational */
|
|
PCI_ERS_RESULT_RECOVERED = (__force pci_ers_result_t) 5,
|
|
|
|
/* No AER capabilities registered for the driver */
|
|
PCI_ERS_RESULT_NO_AER_DRIVER = (__force pci_ers_result_t) 6,
|
|
};
|
|
|
|
/* PCI bus error event callbacks */
|
|
struct pci_error_handlers {
|
|
/* PCI bus error detected on this device */
|
|
pci_ers_result_t (*error_detected)(struct pci_dev *dev,
|
|
enum pci_channel_state error);
|
|
|
|
/* MMIO has been re-enabled, but not DMA */
|
|
pci_ers_result_t (*mmio_enabled)(struct pci_dev *dev);
|
|
|
|
/* PCI Express link has been reset */
|
|
pci_ers_result_t (*link_reset)(struct pci_dev *dev);
|
|
|
|
/* PCI slot has been reset */
|
|
pci_ers_result_t (*slot_reset)(struct pci_dev *dev);
|
|
|
|
/* Device driver may resume normal operations */
|
|
void (*resume)(struct pci_dev *dev);
|
|
};
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
struct module;
|
|
struct pci_driver {
|
|
struct list_head node;
|
|
const char *name;
|
|
const struct pci_device_id *id_table; /* must be non-NULL for probe to be called */
|
|
int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
|
|
void (*remove) (struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
|
|
int (*suspend) (struct pci_dev *dev, pm_message_t state); /* Device suspended */
|
|
int (*suspend_late) (struct pci_dev *dev, pm_message_t state);
|
|
int (*resume_early) (struct pci_dev *dev);
|
|
int (*resume) (struct pci_dev *dev); /* Device woken up */
|
|
void (*shutdown) (struct pci_dev *dev);
|
|
int (*sriov_configure) (struct pci_dev *dev, int num_vfs); /* PF pdev */
|
|
const struct pci_error_handlers *err_handler;
|
|
struct device_driver driver;
|
|
struct pci_dynids dynids;
|
|
};
|
|
|
|
#define to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
|
|
|
|
/**
|
|
* DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
|
|
* @_table: device table name
|
|
*
|
|
* This macro is used to create a struct pci_device_id array (a device table)
|
|
* in a generic manner.
|
|
*/
|
|
#define DEFINE_PCI_DEVICE_TABLE(_table) \
|
|
const struct pci_device_id _table[]
|
|
|
|
/**
|
|
* PCI_DEVICE - macro used to describe a specific pci device
|
|
* @vend: the 16 bit PCI Vendor ID
|
|
* @dev: the 16 bit PCI Device ID
|
|
*
|
|
* This macro is used to create a struct pci_device_id that matches a
|
|
* specific device. The subvendor and subdevice fields will be set to
|
|
* PCI_ANY_ID.
|
|
*/
|
|
#define PCI_DEVICE(vend,dev) \
|
|
.vendor = (vend), .device = (dev), \
|
|
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
|
|
|
|
/**
|
|
* PCI_DEVICE_SUB - macro used to describe a specific pci device with subsystem
|
|
* @vend: the 16 bit PCI Vendor ID
|
|
* @dev: the 16 bit PCI Device ID
|
|
* @subvend: the 16 bit PCI Subvendor ID
|
|
* @subdev: the 16 bit PCI Subdevice ID
|
|
*
|
|
* This macro is used to create a struct pci_device_id that matches a
|
|
* specific device with subsystem information.
|
|
*/
|
|
#define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \
|
|
.vendor = (vend), .device = (dev), \
|
|
.subvendor = (subvend), .subdevice = (subdev)
|
|
|
|
/**
|
|
* PCI_DEVICE_CLASS - macro used to describe a specific pci device class
|
|
* @dev_class: the class, subclass, prog-if triple for this device
|
|
* @dev_class_mask: the class mask for this device
|
|
*
|
|
* This macro is used to create a struct pci_device_id that matches a
|
|
* specific PCI class. The vendor, device, subvendor, and subdevice
|
|
* fields will be set to PCI_ANY_ID.
|
|
*/
|
|
#define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \
|
|
.class = (dev_class), .class_mask = (dev_class_mask), \
|
|
.vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
|
|
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
|
|
|
|
/**
|
|
* PCI_VDEVICE - macro used to describe a specific pci device in short form
|
|
* @vendor: the vendor name
|
|
* @device: the 16 bit PCI Device ID
|
|
*
|
|
* This macro is used to create a struct pci_device_id that matches a
|
|
* specific PCI device. The subvendor, and subdevice fields will be set
|
|
* to PCI_ANY_ID. The macro allows the next field to follow as the device
|
|
* private data.
|
|
*/
|
|
|
|
#define PCI_VDEVICE(vendor, device) \
|
|
PCI_VENDOR_ID_##vendor, (device), \
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0
|
|
|
|
/* these external functions are only available when PCI support is enabled */
|
|
#ifdef CONFIG_PCI
|
|
|
|
void pcie_bus_configure_settings(struct pci_bus *bus);
|
|
|
|
enum pcie_bus_config_types {
|
|
PCIE_BUS_TUNE_OFF,
|
|
PCIE_BUS_SAFE,
|
|
PCIE_BUS_PERFORMANCE,
|
|
PCIE_BUS_PEER2PEER,
|
|
};
|
|
|
|
extern enum pcie_bus_config_types pcie_bus_config;
|
|
|
|
extern struct bus_type pci_bus_type;
|
|
|
|
/* Do NOT directly access these two variables, unless you are arch specific pci
|
|
* code, or pci core code. */
|
|
extern struct list_head pci_root_buses; /* list of all known PCI buses */
|
|
/* Some device drivers need know if pci is initiated */
|
|
int no_pci_devices(void);
|
|
|
|
void pcibios_resource_survey_bus(struct pci_bus *bus);
|
|
void pcibios_add_bus(struct pci_bus *bus);
|
|
void pcibios_remove_bus(struct pci_bus *bus);
|
|
void pcibios_fixup_bus(struct pci_bus *);
|
|
int __must_check pcibios_enable_device(struct pci_dev *, int mask);
|
|
/* Architecture specific versions may override this (weak) */
|
|
char *pcibios_setup(char *str);
|
|
|
|
/* Used only when drivers/pci/setup.c is used */
|
|
resource_size_t pcibios_align_resource(void *, const struct resource *,
|
|
resource_size_t,
|
|
resource_size_t);
|
|
void pcibios_update_irq(struct pci_dev *, int irq);
|
|
|
|
/* Weak but can be overriden by arch */
|
|
void pci_fixup_cardbus(struct pci_bus *);
|
|
|
|
/* Generic PCI functions used internally */
|
|
|
|
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
|
|
struct resource *res);
|
|
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
|
|
struct pci_bus_region *region);
|
|
void pcibios_scan_specific_bus(int busn);
|
|
struct pci_bus *pci_find_bus(int domain, int busnr);
|
|
void pci_bus_add_devices(const struct pci_bus *bus);
|
|
struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
|
|
struct pci_ops *ops, void *sysdata);
|
|
struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
|
|
struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
|
|
struct pci_ops *ops, void *sysdata,
|
|
struct list_head *resources);
|
|
int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
|
|
int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
|
|
void pci_bus_release_busn_res(struct pci_bus *b);
|
|
struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
|
|
struct pci_ops *ops, void *sysdata,
|
|
struct list_head *resources);
|
|
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
|
|
int busnr);
|
|
void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
|
|
struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
|
|
const char *name,
|
|
struct hotplug_slot *hotplug);
|
|
void pci_destroy_slot(struct pci_slot *slot);
|
|
void pci_renumber_slot(struct pci_slot *slot, int slot_nr);
|
|
int pci_scan_slot(struct pci_bus *bus, int devfn);
|
|
struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
|
|
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
|
|
unsigned int pci_scan_child_bus(struct pci_bus *bus);
|
|
int __must_check pci_bus_add_device(struct pci_dev *dev);
|
|
void pci_read_bridge_bases(struct pci_bus *child);
|
|
struct resource *pci_find_parent_resource(const struct pci_dev *dev,
|
|
struct resource *res);
|
|
u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin);
|
|
int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge);
|
|
u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp);
|
|
struct pci_dev *pci_dev_get(struct pci_dev *dev);
|
|
void pci_dev_put(struct pci_dev *dev);
|
|
void pci_remove_bus(struct pci_bus *b);
|
|
void pci_stop_and_remove_bus_device(struct pci_dev *dev);
|
|
void pci_stop_root_bus(struct pci_bus *bus);
|
|
void pci_remove_root_bus(struct pci_bus *bus);
|
|
void pci_setup_cardbus(struct pci_bus *bus);
|
|
void pci_sort_breadthfirst(void);
|
|
#define dev_is_pci(d) ((d)->bus == &pci_bus_type)
|
|
#define dev_is_pf(d) ((dev_is_pci(d) ? to_pci_dev(d)->is_physfn : false))
|
|
#define dev_num_vf(d) ((dev_is_pci(d) ? pci_num_vf(to_pci_dev(d)) : 0))
|
|
|
|
/* Generic PCI functions exported to card drivers */
|
|
|
|
enum pci_lost_interrupt_reason {
|
|
PCI_LOST_IRQ_NO_INFORMATION = 0,
|
|
PCI_LOST_IRQ_DISABLE_MSI,
|
|
PCI_LOST_IRQ_DISABLE_MSIX,
|
|
PCI_LOST_IRQ_DISABLE_ACPI,
|
|
};
|
|
enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev);
|
|
int pci_find_capability(struct pci_dev *dev, int cap);
|
|
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap);
|
|
int pci_find_ext_capability(struct pci_dev *dev, int cap);
|
|
int pci_find_next_ext_capability(struct pci_dev *dev, int pos, int cap);
|
|
int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
|
|
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
|
|
struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
|
|
|
|
struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
|
|
struct pci_dev *from);
|
|
struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
|
|
unsigned int ss_vendor, unsigned int ss_device,
|
|
struct pci_dev *from);
|
|
struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
|
|
struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus,
|
|
unsigned int devfn);
|
|
static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
|
|
unsigned int devfn)
|
|
{
|
|
return pci_get_domain_bus_and_slot(0, bus, devfn);
|
|
}
|
|
struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
|
|
int pci_dev_present(const struct pci_device_id *ids);
|
|
|
|
int pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u8 *val);
|
|
int pci_bus_read_config_word(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u16 *val);
|
|
int pci_bus_read_config_dword(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u32 *val);
|
|
int pci_bus_write_config_byte(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u8 val);
|
|
int pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u16 val);
|
|
int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u32 val);
|
|
struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
|
|
|
|
static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
|
|
{
|
|
return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
|
|
}
|
|
static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
|
|
{
|
|
return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
|
|
}
|
|
static inline int pci_read_config_dword(const struct pci_dev *dev, int where,
|
|
u32 *val)
|
|
{
|
|
return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
|
|
}
|
|
static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
|
|
{
|
|
return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
|
|
}
|
|
static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
|
|
{
|
|
return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
|
|
}
|
|
static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
|
|
u32 val)
|
|
{
|
|
return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
|
|
}
|
|
|
|
int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val);
|
|
int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val);
|
|
int pcie_capability_write_word(struct pci_dev *dev, int pos, u16 val);
|
|
int pcie_capability_write_dword(struct pci_dev *dev, int pos, u32 val);
|
|
int pcie_capability_clear_and_set_word(struct pci_dev *dev, int pos,
|
|
u16 clear, u16 set);
|
|
int pcie_capability_clear_and_set_dword(struct pci_dev *dev, int pos,
|
|
u32 clear, u32 set);
|
|
|
|
static inline int pcie_capability_set_word(struct pci_dev *dev, int pos,
|
|
u16 set)
|
|
{
|
|
return pcie_capability_clear_and_set_word(dev, pos, 0, set);
|
|
}
|
|
|
|
static inline int pcie_capability_set_dword(struct pci_dev *dev, int pos,
|
|
u32 set)
|
|
{
|
|
return pcie_capability_clear_and_set_dword(dev, pos, 0, set);
|
|
}
|
|
|
|
static inline int pcie_capability_clear_word(struct pci_dev *dev, int pos,
|
|
u16 clear)
|
|
{
|
|
return pcie_capability_clear_and_set_word(dev, pos, clear, 0);
|
|
}
|
|
|
|
static inline int pcie_capability_clear_dword(struct pci_dev *dev, int pos,
|
|
u32 clear)
|
|
{
|
|
return pcie_capability_clear_and_set_dword(dev, pos, clear, 0);
|
|
}
|
|
|
|
/* user-space driven config access */
|
|
int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
|
|
int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
|
|
int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
|
|
int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
|
|
int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
|
|
int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
|
|
|
|
int __must_check pci_enable_device(struct pci_dev *dev);
|
|
int __must_check pci_enable_device_io(struct pci_dev *dev);
|
|
int __must_check pci_enable_device_mem(struct pci_dev *dev);
|
|
int __must_check pci_reenable_device(struct pci_dev *);
|
|
int __must_check pcim_enable_device(struct pci_dev *pdev);
|
|
void pcim_pin_device(struct pci_dev *pdev);
|
|
|
|
static inline int pci_is_enabled(struct pci_dev *pdev)
|
|
{
|
|
return (atomic_read(&pdev->enable_cnt) > 0);
|
|
}
|
|
|
|
static inline int pci_is_managed(struct pci_dev *pdev)
|
|
{
|
|
return pdev->is_managed;
|
|
}
|
|
|
|
void pci_disable_device(struct pci_dev *dev);
|
|
|
|
extern unsigned int pcibios_max_latency;
|
|
void pci_set_master(struct pci_dev *dev);
|
|
void pci_clear_master(struct pci_dev *dev);
|
|
|
|
int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
|
|
int pci_set_cacheline_size(struct pci_dev *dev);
|
|
#define HAVE_PCI_SET_MWI
|
|
int __must_check pci_set_mwi(struct pci_dev *dev);
|
|
int pci_try_set_mwi(struct pci_dev *dev);
|
|
void pci_clear_mwi(struct pci_dev *dev);
|
|
void pci_intx(struct pci_dev *dev, int enable);
|
|
bool pci_intx_mask_supported(struct pci_dev *dev);
|
|
bool pci_check_and_mask_intx(struct pci_dev *dev);
|
|
bool pci_check_and_unmask_intx(struct pci_dev *dev);
|
|
void pci_msi_off(struct pci_dev *dev);
|
|
int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
|
|
int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
|
|
int pci_wait_for_pending_transaction(struct pci_dev *dev);
|
|
int pcix_get_max_mmrbc(struct pci_dev *dev);
|
|
int pcix_get_mmrbc(struct pci_dev *dev);
|
|
int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
|
|
int pcie_get_readrq(struct pci_dev *dev);
|
|
int pcie_set_readrq(struct pci_dev *dev, int rq);
|
|
int pcie_get_mps(struct pci_dev *dev);
|
|
int pcie_set_mps(struct pci_dev *dev, int mps);
|
|
int pcie_get_minimum_link(struct pci_dev *dev, enum pci_bus_speed *speed,
|
|
enum pcie_link_width *width);
|
|
int __pci_reset_function(struct pci_dev *dev);
|
|
int __pci_reset_function_locked(struct pci_dev *dev);
|
|
int pci_reset_function(struct pci_dev *dev);
|
|
int pci_probe_reset_slot(struct pci_slot *slot);
|
|
int pci_reset_slot(struct pci_slot *slot);
|
|
int pci_probe_reset_bus(struct pci_bus *bus);
|
|
int pci_reset_bus(struct pci_bus *bus);
|
|
void pci_reset_bridge_secondary_bus(struct pci_dev *dev);
|
|
void pci_update_resource(struct pci_dev *dev, int resno);
|
|
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
|
|
int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
|
|
int pci_select_bars(struct pci_dev *dev, unsigned long flags);
|
|
|
|
/* ROM control related routines */
|
|
int pci_enable_rom(struct pci_dev *pdev);
|
|
void pci_disable_rom(struct pci_dev *pdev);
|
|
void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
|
|
void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
|
|
size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
|
|
void __iomem __must_check *pci_platform_rom(struct pci_dev *pdev, size_t *size);
|
|
|
|
/* Power management related routines */
|
|
int pci_save_state(struct pci_dev *dev);
|
|
void pci_restore_state(struct pci_dev *dev);
|
|
struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev);
|
|
int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state);
|
|
int pci_load_and_free_saved_state(struct pci_dev *dev,
|
|
struct pci_saved_state **state);
|
|
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state);
|
|
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
|
|
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
|
|
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
|
|
void pci_pme_active(struct pci_dev *dev, bool enable);
|
|
int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
|
|
bool runtime, bool enable);
|
|
int pci_wake_from_d3(struct pci_dev *dev, bool enable);
|
|
pci_power_t pci_target_state(struct pci_dev *dev);
|
|
int pci_prepare_to_sleep(struct pci_dev *dev);
|
|
int pci_back_from_sleep(struct pci_dev *dev);
|
|
bool pci_dev_run_wake(struct pci_dev *dev);
|
|
bool pci_check_pme_status(struct pci_dev *dev);
|
|
void pci_pme_wakeup_bus(struct pci_bus *bus);
|
|
|
|
static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
|
|
bool enable)
|
|
{
|
|
return __pci_enable_wake(dev, state, false, enable);
|
|
}
|
|
|
|
#define PCI_EXP_IDO_REQUEST (1<<0)
|
|
#define PCI_EXP_IDO_COMPLETION (1<<1)
|
|
void pci_enable_ido(struct pci_dev *dev, unsigned long type);
|
|
void pci_disable_ido(struct pci_dev *dev, unsigned long type);
|
|
|
|
enum pci_obff_signal_type {
|
|
PCI_EXP_OBFF_SIGNAL_L0 = 0,
|
|
PCI_EXP_OBFF_SIGNAL_ALWAYS = 1,
|
|
};
|
|
int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type);
|
|
void pci_disable_obff(struct pci_dev *dev);
|
|
|
|
int pci_enable_ltr(struct pci_dev *dev);
|
|
void pci_disable_ltr(struct pci_dev *dev);
|
|
int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns);
|
|
|
|
/* For use by arch with custom probe code */
|
|
void set_pcie_port_type(struct pci_dev *pdev);
|
|
void set_pcie_hotplug_bridge(struct pci_dev *pdev);
|
|
|
|
/* Functions for PCI Hotplug drivers to use */
|
|
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
|
|
unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge);
|
|
unsigned int pci_rescan_bus(struct pci_bus *bus);
|
|
|
|
/* Vital product data routines */
|
|
ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
|
|
ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
|
|
int pci_vpd_truncate(struct pci_dev *dev, size_t size);
|
|
|
|
/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
|
|
resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
|
|
void pci_bus_assign_resources(const struct pci_bus *bus);
|
|
void pci_bus_size_bridges(struct pci_bus *bus);
|
|
int pci_claim_resource(struct pci_dev *, int);
|
|
void pci_assign_unassigned_resources(void);
|
|
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
|
|
void pci_assign_unassigned_bus_resources(struct pci_bus *bus);
|
|
void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus);
|
|
void pdev_enable_device(struct pci_dev *);
|
|
int pci_enable_resources(struct pci_dev *, int mask);
|
|
void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
|
|
int (*)(const struct pci_dev *, u8, u8));
|
|
#define HAVE_PCI_REQ_REGIONS 2
|
|
int __must_check pci_request_regions(struct pci_dev *, const char *);
|
|
int __must_check pci_request_regions_exclusive(struct pci_dev *, const char *);
|
|
void pci_release_regions(struct pci_dev *);
|
|
int __must_check pci_request_region(struct pci_dev *, int, const char *);
|
|
int __must_check pci_request_region_exclusive(struct pci_dev *, int, const char *);
|
|
void pci_release_region(struct pci_dev *, int);
|
|
int pci_request_selected_regions(struct pci_dev *, int, const char *);
|
|
int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *);
|
|
void pci_release_selected_regions(struct pci_dev *, int);
|
|
|
|
/* drivers/pci/bus.c */
|
|
struct pci_bus *pci_bus_get(struct pci_bus *bus);
|
|
void pci_bus_put(struct pci_bus *bus);
|
|
void pci_add_resource(struct list_head *resources, struct resource *res);
|
|
void pci_add_resource_offset(struct list_head *resources, struct resource *res,
|
|
resource_size_t offset);
|
|
void pci_free_resource_list(struct list_head *resources);
|
|
void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
|
|
struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
|
|
void pci_bus_remove_resources(struct pci_bus *bus);
|
|
|
|
#define pci_bus_for_each_resource(bus, res, i) \
|
|
for (i = 0; \
|
|
(res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \
|
|
i++)
|
|
|
|
int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
|
|
struct resource *res, resource_size_t size,
|
|
resource_size_t align, resource_size_t min,
|
|
unsigned int type_mask,
|
|
resource_size_t (*alignf)(void *,
|
|
const struct resource *,
|
|
resource_size_t,
|
|
resource_size_t),
|
|
void *alignf_data);
|
|
|
|
/* Proper probing supporting hot-pluggable devices */
|
|
int __must_check __pci_register_driver(struct pci_driver *, struct module *,
|
|
const char *mod_name);
|
|
|
|
/*
|
|
* pci_register_driver must be a macro so that KBUILD_MODNAME can be expanded
|
|
*/
|
|
#define pci_register_driver(driver) \
|
|
__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
|
|
|
|
void pci_unregister_driver(struct pci_driver *dev);
|
|
|
|
/**
|
|
* module_pci_driver() - Helper macro for registering a PCI driver
|
|
* @__pci_driver: pci_driver struct
|
|
*
|
|
* Helper macro for PCI drivers which do not do anything special in module
|
|
* init/exit. This eliminates a lot of boilerplate. Each module may only
|
|
* use this macro once, and calling it replaces module_init() and module_exit()
|
|
*/
|
|
#define module_pci_driver(__pci_driver) \
|
|
module_driver(__pci_driver, pci_register_driver, \
|
|
pci_unregister_driver)
|
|
|
|
struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
|
|
int pci_add_dynid(struct pci_driver *drv,
|
|
unsigned int vendor, unsigned int device,
|
|
unsigned int subvendor, unsigned int subdevice,
|
|
unsigned int class, unsigned int class_mask,
|
|
unsigned long driver_data);
|
|
const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
|
|
struct pci_dev *dev);
|
|
int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
|
|
int pass);
|
|
|
|
void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
|
|
void *userdata);
|
|
int pci_cfg_space_size_ext(struct pci_dev *dev);
|
|
int pci_cfg_space_size(struct pci_dev *dev);
|
|
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
|
|
void pci_setup_bridge(struct pci_bus *bus);
|
|
resource_size_t pcibios_window_alignment(struct pci_bus *bus,
|
|
unsigned long type);
|
|
|
|
#define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0)
|
|
#define PCI_VGA_STATE_CHANGE_DECODES (1 << 1)
|
|
|
|
int pci_set_vga_state(struct pci_dev *pdev, bool decode,
|
|
unsigned int command_bits, u32 flags);
|
|
/* kmem_cache style wrapper around pci_alloc_consistent() */
|
|
|
|
#include <linux/pci-dma.h>
|
|
#include <linux/dmapool.h>
|
|
|
|
#define pci_pool dma_pool
|
|
#define pci_pool_create(name, pdev, size, align, allocation) \
|
|
dma_pool_create(name, &pdev->dev, size, align, allocation)
|
|
#define pci_pool_destroy(pool) dma_pool_destroy(pool)
|
|
#define pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
|
|
#define pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
|
|
|
|
enum pci_dma_burst_strategy {
|
|
PCI_DMA_BURST_INFINITY, /* make bursts as large as possible,
|
|
strategy_parameter is N/A */
|
|
PCI_DMA_BURST_BOUNDARY, /* disconnect at every strategy_parameter
|
|
byte boundaries */
|
|
PCI_DMA_BURST_MULTIPLE, /* disconnect at some multiple of
|
|
strategy_parameter byte boundaries */
|
|
};
|
|
|
|
struct msix_entry {
|
|
u32 vector; /* kernel uses to write allocated vector */
|
|
u16 entry; /* driver uses to specify entry, OS writes */
|
|
};
|
|
|
|
|
|
#ifndef CONFIG_PCI_MSI
|
|
static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
static inline int
|
|
pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
static inline void pci_msi_shutdown(struct pci_dev *dev)
|
|
{ }
|
|
static inline void pci_disable_msi(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline int pci_msix_table_size(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int pci_enable_msix(struct pci_dev *dev,
|
|
struct msix_entry *entries, int nvec)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
static inline void pci_msix_shutdown(struct pci_dev *dev)
|
|
{ }
|
|
static inline void pci_disable_msix(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline void pci_restore_msi_state(struct pci_dev *dev)
|
|
{ }
|
|
static inline int pci_msi_enabled(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#else
|
|
int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
|
|
int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec);
|
|
void pci_msi_shutdown(struct pci_dev *dev);
|
|
void pci_disable_msi(struct pci_dev *dev);
|
|
int pci_msix_table_size(struct pci_dev *dev);
|
|
int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec);
|
|
void pci_msix_shutdown(struct pci_dev *dev);
|
|
void pci_disable_msix(struct pci_dev *dev);
|
|
void msi_remove_pci_irq_vectors(struct pci_dev *dev);
|
|
void pci_restore_msi_state(struct pci_dev *dev);
|
|
int pci_msi_enabled(void);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIEPORTBUS
|
|
extern bool pcie_ports_disabled;
|
|
extern bool pcie_ports_auto;
|
|
#else
|
|
#define pcie_ports_disabled true
|
|
#define pcie_ports_auto false
|
|
#endif
|
|
|
|
#ifndef CONFIG_PCIEASPM
|
|
static inline int pcie_aspm_enabled(void) { return 0; }
|
|
static inline bool pcie_aspm_support_enabled(void) { return false; }
|
|
#else
|
|
int pcie_aspm_enabled(void);
|
|
bool pcie_aspm_support_enabled(void);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIEAER
|
|
void pci_no_aer(void);
|
|
bool pci_aer_available(void);
|
|
#else
|
|
static inline void pci_no_aer(void) { }
|
|
static inline bool pci_aer_available(void) { return false; }
|
|
#endif
|
|
|
|
#ifndef CONFIG_PCIE_ECRC
|
|
static inline void pcie_set_ecrc_checking(struct pci_dev *dev)
|
|
{
|
|
return;
|
|
}
|
|
static inline void pcie_ecrc_get_policy(char *str) {};
|
|
#else
|
|
void pcie_set_ecrc_checking(struct pci_dev *dev);
|
|
void pcie_ecrc_get_policy(char *str);
|
|
#endif
|
|
|
|
#define pci_enable_msi(pdev) pci_enable_msi_block(pdev, 1)
|
|
|
|
#ifdef CONFIG_HT_IRQ
|
|
/* The functions a driver should call */
|
|
int ht_create_irq(struct pci_dev *dev, int idx);
|
|
void ht_destroy_irq(unsigned int irq);
|
|
#endif /* CONFIG_HT_IRQ */
|
|
|
|
void pci_cfg_access_lock(struct pci_dev *dev);
|
|
bool pci_cfg_access_trylock(struct pci_dev *dev);
|
|
void pci_cfg_access_unlock(struct pci_dev *dev);
|
|
|
|
/*
|
|
* PCI domain support. Sometimes called PCI segment (eg by ACPI),
|
|
* a PCI domain is defined to be a set of PCI busses which share
|
|
* configuration space.
|
|
*/
|
|
#ifdef CONFIG_PCI_DOMAINS
|
|
extern int pci_domains_supported;
|
|
#else
|
|
enum { pci_domains_supported = 0 };
|
|
static inline int pci_domain_nr(struct pci_bus *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int pci_proc_domain(struct pci_bus *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PCI_DOMAINS */
|
|
|
|
/* some architectures require additional setup to direct VGA traffic */
|
|
typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
|
|
unsigned int command_bits, u32 flags);
|
|
void pci_register_set_vga_state(arch_set_vga_state_t func);
|
|
|
|
#else /* CONFIG_PCI is not enabled */
|
|
|
|
/*
|
|
* If the system does not have PCI, clearly these return errors. Define
|
|
* these as simple inline functions to avoid hair in drivers.
|
|
*/
|
|
|
|
#define _PCI_NOP(o, s, t) \
|
|
static inline int pci_##o##_config_##s(struct pci_dev *dev, \
|
|
int where, t val) \
|
|
{ return PCIBIOS_FUNC_NOT_SUPPORTED; }
|
|
|
|
#define _PCI_NOP_ALL(o, x) _PCI_NOP(o, byte, u8 x) \
|
|
_PCI_NOP(o, word, u16 x) \
|
|
_PCI_NOP(o, dword, u32 x)
|
|
_PCI_NOP_ALL(read, *)
|
|
_PCI_NOP_ALL(write,)
|
|
|
|
static inline struct pci_dev *pci_get_device(unsigned int vendor,
|
|
unsigned int device,
|
|
struct pci_dev *from)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static inline struct pci_dev *pci_get_subsys(unsigned int vendor,
|
|
unsigned int device,
|
|
unsigned int ss_vendor,
|
|
unsigned int ss_device,
|
|
struct pci_dev *from)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static inline struct pci_dev *pci_get_class(unsigned int class,
|
|
struct pci_dev *from)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
#define pci_dev_present(ids) (0)
|
|
#define no_pci_devices() (1)
|
|
#define pci_dev_put(dev) do { } while (0)
|
|
|
|
static inline void pci_set_master(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline int pci_enable_device(struct pci_dev *dev)
|
|
{
|
|
return -EIO;
|
|
}
|
|
|
|
static inline void pci_disable_device(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
|
|
{
|
|
return -EIO;
|
|
}
|
|
|
|
static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
|
|
{
|
|
return -EIO;
|
|
}
|
|
|
|
static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
|
|
unsigned int size)
|
|
{
|
|
return -EIO;
|
|
}
|
|
|
|
static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
|
|
unsigned long mask)
|
|
{
|
|
return -EIO;
|
|
}
|
|
|
|
static inline int pci_assign_resource(struct pci_dev *dev, int i)
|
|
{
|
|
return -EBUSY;
|
|
}
|
|
|
|
static inline int __pci_register_driver(struct pci_driver *drv,
|
|
struct module *owner)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int pci_register_driver(struct pci_driver *drv)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void pci_unregister_driver(struct pci_driver *drv)
|
|
{ }
|
|
|
|
static inline int pci_find_capability(struct pci_dev *dev, int cap)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int pci_find_next_capability(struct pci_dev *dev, u8 post,
|
|
int cap)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int pci_find_ext_capability(struct pci_dev *dev, int cap)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* Power management related routines */
|
|
static inline int pci_save_state(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void pci_restore_state(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline pci_power_t pci_choose_state(struct pci_dev *dev,
|
|
pm_message_t state)
|
|
{
|
|
return PCI_D0;
|
|
}
|
|
|
|
static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
|
|
int enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void pci_enable_ido(struct pci_dev *dev, unsigned long type)
|
|
{
|
|
}
|
|
|
|
static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type)
|
|
{
|
|
}
|
|
|
|
static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void pci_disable_obff(struct pci_dev *dev)
|
|
{
|
|
}
|
|
|
|
static inline int pci_request_regions(struct pci_dev *dev, const char *res_name)
|
|
{
|
|
return -EIO;
|
|
}
|
|
|
|
static inline void pci_release_regions(struct pci_dev *dev)
|
|
{ }
|
|
|
|
#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
|
|
|
|
static inline void pci_block_cfg_access(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline int pci_block_cfg_access_in_atomic(struct pci_dev *dev)
|
|
{ return 0; }
|
|
|
|
static inline void pci_unblock_cfg_access(struct pci_dev *dev)
|
|
{ }
|
|
|
|
static inline struct pci_bus *pci_find_next_bus(const struct pci_bus *from)
|
|
{ return NULL; }
|
|
|
|
static inline struct pci_dev *pci_get_slot(struct pci_bus *bus,
|
|
unsigned int devfn)
|
|
{ return NULL; }
|
|
|
|
static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
|
|
unsigned int devfn)
|
|
{ return NULL; }
|
|
|
|
static inline int pci_domain_nr(struct pci_bus *bus)
|
|
{ return 0; }
|
|
|
|
static inline struct pci_dev *pci_dev_get(struct pci_dev *dev)
|
|
{ return NULL; }
|
|
|
|
#define dev_is_pci(d) (false)
|
|
#define dev_is_pf(d) (false)
|
|
#define dev_num_vf(d) (0)
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/* Include architecture-dependent settings and functions */
|
|
|
|
#include <asm/pci.h>
|
|
|
|
#ifndef PCIBIOS_MAX_MEM_32
|
|
#define PCIBIOS_MAX_MEM_32 (-1)
|
|
#endif
|
|
|
|
/* these helpers provide future and backwards compatibility
|
|
* for accessing popular PCI BAR info */
|
|
#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
|
|
#define pci_resource_end(dev, bar) ((dev)->resource[(bar)].end)
|
|
#define pci_resource_flags(dev, bar) ((dev)->resource[(bar)].flags)
|
|
#define pci_resource_len(dev,bar) \
|
|
((pci_resource_start((dev), (bar)) == 0 && \
|
|
pci_resource_end((dev), (bar)) == \
|
|
pci_resource_start((dev), (bar))) ? 0 : \
|
|
\
|
|
(pci_resource_end((dev), (bar)) - \
|
|
pci_resource_start((dev), (bar)) + 1))
|
|
|
|
/* Similar to the helpers above, these manipulate per-pci_dev
|
|
* driver-specific data. They are really just a wrapper around
|
|
* the generic device structure functions of these calls.
|
|
*/
|
|
static inline void *pci_get_drvdata(struct pci_dev *pdev)
|
|
{
|
|
return dev_get_drvdata(&pdev->dev);
|
|
}
|
|
|
|
static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
|
|
{
|
|
dev_set_drvdata(&pdev->dev, data);
|
|
}
|
|
|
|
/* If you want to know what to call your pci_dev, ask this function.
|
|
* Again, it's a wrapper around the generic device.
|
|
*/
|
|
static inline const char *pci_name(const struct pci_dev *pdev)
|
|
{
|
|
return dev_name(&pdev->dev);
|
|
}
|
|
|
|
|
|
/* Some archs don't want to expose struct resource to userland as-is
|
|
* in sysfs and /proc
|
|
*/
|
|
#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER
|
|
static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
|
|
const struct resource *rsrc, resource_size_t *start,
|
|
resource_size_t *end)
|
|
{
|
|
*start = rsrc->start;
|
|
*end = rsrc->end;
|
|
}
|
|
#endif /* HAVE_ARCH_PCI_RESOURCE_TO_USER */
|
|
|
|
|
|
/*
|
|
* The world is not perfect and supplies us with broken PCI devices.
|
|
* For at least a part of these bugs we need a work-around, so both
|
|
* generic (drivers/pci/quirks.c) and per-architecture code can define
|
|
* fixup hooks to be called for particular buggy devices.
|
|
*/
|
|
|
|
struct pci_fixup {
|
|
u16 vendor; /* You can use PCI_ANY_ID here of course */
|
|
u16 device; /* You can use PCI_ANY_ID here of course */
|
|
u32 class; /* You can use PCI_ANY_ID here too */
|
|
unsigned int class_shift; /* should be 0, 8, 16 */
|
|
void (*hook)(struct pci_dev *dev);
|
|
};
|
|
|
|
enum pci_fixup_pass {
|
|
pci_fixup_early, /* Before probing BARs */
|
|
pci_fixup_header, /* After reading configuration header */
|
|
pci_fixup_final, /* Final phase of device fixups */
|
|
pci_fixup_enable, /* pci_enable_device() time */
|
|
pci_fixup_resume, /* pci_device_resume() */
|
|
pci_fixup_suspend, /* pci_device_suspend */
|
|
pci_fixup_resume_early, /* pci_device_resume_early() */
|
|
};
|
|
|
|
/* Anonymous variables would be nice... */
|
|
#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \
|
|
class_shift, hook) \
|
|
static const struct pci_fixup __pci_fixup_##name __used \
|
|
__attribute__((__section__(#section), aligned((sizeof(void *))))) \
|
|
= { vendor, device, class, class_shift, hook };
|
|
|
|
#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \
|
|
class_shift, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
|
|
vendor##device##hook, vendor, device, class, class_shift, hook)
|
|
#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \
|
|
class_shift, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
|
|
vendor##device##hook, vendor, device, class, class_shift, hook)
|
|
#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \
|
|
class_shift, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
|
|
vendor##device##hook, vendor, device, class, class_shift, hook)
|
|
#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \
|
|
class_shift, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
|
|
vendor##device##hook, vendor, device, class, class_shift, hook)
|
|
#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \
|
|
class_shift, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
|
|
resume##vendor##device##hook, vendor, device, class, \
|
|
class_shift, hook)
|
|
#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \
|
|
class_shift, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
|
|
resume_early##vendor##device##hook, vendor, device, \
|
|
class, class_shift, hook)
|
|
#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \
|
|
class_shift, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
|
|
suspend##vendor##device##hook, vendor, device, class, \
|
|
class_shift, hook)
|
|
|
|
#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
|
|
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
|
|
#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
|
|
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
|
|
#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
|
|
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
|
|
#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
|
|
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
|
|
#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
|
|
resume##vendor##device##hook, vendor, device, \
|
|
PCI_ANY_ID, 0, hook)
|
|
#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
|
|
resume_early##vendor##device##hook, vendor, device, \
|
|
PCI_ANY_ID, 0, hook)
|
|
#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \
|
|
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
|
|
suspend##vendor##device##hook, vendor, device, \
|
|
PCI_ANY_ID, 0, hook)
|
|
|
|
#ifdef CONFIG_PCI_QUIRKS
|
|
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
|
|
struct pci_dev *pci_get_dma_source(struct pci_dev *dev);
|
|
int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
|
|
#else
|
|
static inline void pci_fixup_device(enum pci_fixup_pass pass,
|
|
struct pci_dev *dev) {}
|
|
static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
|
|
{
|
|
return pci_dev_get(dev);
|
|
}
|
|
static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
|
|
u16 acs_flags)
|
|
{
|
|
return -ENOTTY;
|
|
}
|
|
#endif
|
|
|
|
void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
|
|
void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr);
|
|
void __iomem * const *pcim_iomap_table(struct pci_dev *pdev);
|
|
int pcim_iomap_regions(struct pci_dev *pdev, int mask, const char *name);
|
|
int pcim_iomap_regions_request_all(struct pci_dev *pdev, int mask,
|
|
const char *name);
|
|
void pcim_iounmap_regions(struct pci_dev *pdev, int mask);
|
|
|
|
extern int pci_pci_problems;
|
|
#define PCIPCI_FAIL 1 /* No PCI PCI DMA */
|
|
#define PCIPCI_TRITON 2
|
|
#define PCIPCI_NATOMA 4
|
|
#define PCIPCI_VIAETBF 8
|
|
#define PCIPCI_VSFX 16
|
|
#define PCIPCI_ALIMAGIK 32 /* Need low latency setting */
|
|
#define PCIAGP_FAIL 64 /* No PCI to AGP DMA */
|
|
|
|
extern unsigned long pci_cardbus_io_size;
|
|
extern unsigned long pci_cardbus_mem_size;
|
|
extern u8 pci_dfl_cache_line_size;
|
|
extern u8 pci_cache_line_size;
|
|
|
|
extern unsigned long pci_hotplug_io_size;
|
|
extern unsigned long pci_hotplug_mem_size;
|
|
|
|
/* Architecture specific versions may override these (weak) */
|
|
int pcibios_add_platform_entries(struct pci_dev *dev);
|
|
void pcibios_disable_device(struct pci_dev *dev);
|
|
void pcibios_set_master(struct pci_dev *dev);
|
|
int pcibios_set_pcie_reset_state(struct pci_dev *dev,
|
|
enum pcie_reset_state state);
|
|
int pcibios_add_device(struct pci_dev *dev);
|
|
void pcibios_release_device(struct pci_dev *dev);
|
|
|
|
#ifdef CONFIG_HIBERNATE_CALLBACKS
|
|
extern struct dev_pm_ops pcibios_pm_ops;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI_MMCONFIG
|
|
void __init pci_mmcfg_early_init(void);
|
|
void __init pci_mmcfg_late_init(void);
|
|
#else
|
|
static inline void pci_mmcfg_early_init(void) { }
|
|
static inline void pci_mmcfg_late_init(void) { }
|
|
#endif
|
|
|
|
int pci_ext_cfg_avail(void);
|
|
|
|
void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar);
|
|
|
|
#ifdef CONFIG_PCI_IOV
|
|
int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
|
|
void pci_disable_sriov(struct pci_dev *dev);
|
|
irqreturn_t pci_sriov_migration(struct pci_dev *dev);
|
|
int pci_num_vf(struct pci_dev *dev);
|
|
int pci_vfs_assigned(struct pci_dev *dev);
|
|
int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
|
|
int pci_sriov_get_totalvfs(struct pci_dev *dev);
|
|
#else
|
|
static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
static inline void pci_disable_sriov(struct pci_dev *dev)
|
|
{
|
|
}
|
|
static inline irqreturn_t pci_sriov_migration(struct pci_dev *dev)
|
|
{
|
|
return IRQ_NONE;
|
|
}
|
|
static inline int pci_num_vf(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int pci_vfs_assigned(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int pci_sriov_get_totalvfs(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
|
|
void pci_hp_create_module_link(struct pci_slot *pci_slot);
|
|
void pci_hp_remove_module_link(struct pci_slot *pci_slot);
|
|
#endif
|
|
|
|
/**
|
|
* pci_pcie_cap - get the saved PCIe capability offset
|
|
* @dev: PCI device
|
|
*
|
|
* PCIe capability offset is calculated at PCI device initialization
|
|
* time and saved in the data structure. This function returns saved
|
|
* PCIe capability offset. Using this instead of pci_find_capability()
|
|
* reduces unnecessary search in the PCI configuration space. If you
|
|
* need to calculate PCIe capability offset from raw device for some
|
|
* reasons, please use pci_find_capability() instead.
|
|
*/
|
|
static inline int pci_pcie_cap(struct pci_dev *dev)
|
|
{
|
|
return dev->pcie_cap;
|
|
}
|
|
|
|
/**
|
|
* pci_is_pcie - check if the PCI device is PCI Express capable
|
|
* @dev: PCI device
|
|
*
|
|
* Retrun true if the PCI device is PCI Express capable, false otherwise.
|
|
*/
|
|
static inline bool pci_is_pcie(struct pci_dev *dev)
|
|
{
|
|
return !!pci_pcie_cap(dev);
|
|
}
|
|
|
|
/**
|
|
* pcie_caps_reg - get the PCIe Capabilities Register
|
|
* @dev: PCI device
|
|
*/
|
|
static inline u16 pcie_caps_reg(const struct pci_dev *dev)
|
|
{
|
|
return dev->pcie_flags_reg;
|
|
}
|
|
|
|
/**
|
|
* pci_pcie_type - get the PCIe device/port type
|
|
* @dev: PCI device
|
|
*/
|
|
static inline int pci_pcie_type(const struct pci_dev *dev)
|
|
{
|
|
return (pcie_caps_reg(dev) & PCI_EXP_FLAGS_TYPE) >> 4;
|
|
}
|
|
|
|
void pci_request_acs(void);
|
|
bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags);
|
|
bool pci_acs_path_enabled(struct pci_dev *start,
|
|
struct pci_dev *end, u16 acs_flags);
|
|
|
|
#define PCI_VPD_LRDT 0x80 /* Large Resource Data Type */
|
|
#define PCI_VPD_LRDT_ID(x) (x | PCI_VPD_LRDT)
|
|
|
|
/* Large Resource Data Type Tag Item Names */
|
|
#define PCI_VPD_LTIN_ID_STRING 0x02 /* Identifier String */
|
|
#define PCI_VPD_LTIN_RO_DATA 0x10 /* Read-Only Data */
|
|
#define PCI_VPD_LTIN_RW_DATA 0x11 /* Read-Write Data */
|
|
|
|
#define PCI_VPD_LRDT_ID_STRING PCI_VPD_LRDT_ID(PCI_VPD_LTIN_ID_STRING)
|
|
#define PCI_VPD_LRDT_RO_DATA PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RO_DATA)
|
|
#define PCI_VPD_LRDT_RW_DATA PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RW_DATA)
|
|
|
|
/* Small Resource Data Type Tag Item Names */
|
|
#define PCI_VPD_STIN_END 0x78 /* End */
|
|
|
|
#define PCI_VPD_SRDT_END PCI_VPD_STIN_END
|
|
|
|
#define PCI_VPD_SRDT_TIN_MASK 0x78
|
|
#define PCI_VPD_SRDT_LEN_MASK 0x07
|
|
|
|
#define PCI_VPD_LRDT_TAG_SIZE 3
|
|
#define PCI_VPD_SRDT_TAG_SIZE 1
|
|
|
|
#define PCI_VPD_INFO_FLD_HDR_SIZE 3
|
|
|
|
#define PCI_VPD_RO_KEYWORD_PARTNO "PN"
|
|
#define PCI_VPD_RO_KEYWORD_MFR_ID "MN"
|
|
#define PCI_VPD_RO_KEYWORD_VENDOR0 "V0"
|
|
#define PCI_VPD_RO_KEYWORD_CHKSUM "RV"
|
|
|
|
/**
|
|
* pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
|
|
* @lrdt: Pointer to the beginning of the Large Resource Data Type tag
|
|
*
|
|
* Returns the extracted Large Resource Data Type length.
|
|
*/
|
|
static inline u16 pci_vpd_lrdt_size(const u8 *lrdt)
|
|
{
|
|
return (u16)lrdt[1] + ((u16)lrdt[2] << 8);
|
|
}
|
|
|
|
/**
|
|
* pci_vpd_srdt_size - Extracts the Small Resource Data Type length
|
|
* @lrdt: Pointer to the beginning of the Small Resource Data Type tag
|
|
*
|
|
* Returns the extracted Small Resource Data Type length.
|
|
*/
|
|
static inline u8 pci_vpd_srdt_size(const u8 *srdt)
|
|
{
|
|
return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
|
|
}
|
|
|
|
/**
|
|
* pci_vpd_info_field_size - Extracts the information field length
|
|
* @lrdt: Pointer to the beginning of an information field header
|
|
*
|
|
* Returns the extracted information field length.
|
|
*/
|
|
static inline u8 pci_vpd_info_field_size(const u8 *info_field)
|
|
{
|
|
return info_field[2];
|
|
}
|
|
|
|
/**
|
|
* pci_vpd_find_tag - Locates the Resource Data Type tag provided
|
|
* @buf: Pointer to buffered vpd data
|
|
* @off: The offset into the buffer at which to begin the search
|
|
* @len: The length of the vpd buffer
|
|
* @rdt: The Resource Data Type to search for
|
|
*
|
|
* Returns the index where the Resource Data Type was found or
|
|
* -ENOENT otherwise.
|
|
*/
|
|
int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
|
|
|
|
/**
|
|
* pci_vpd_find_info_keyword - Locates an information field keyword in the VPD
|
|
* @buf: Pointer to buffered vpd data
|
|
* @off: The offset into the buffer at which to begin the search
|
|
* @len: The length of the buffer area, relative to off, in which to search
|
|
* @kw: The keyword to search for
|
|
*
|
|
* Returns the index where the information field keyword was found or
|
|
* -ENOENT otherwise.
|
|
*/
|
|
int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
|
|
unsigned int len, const char *kw);
|
|
|
|
/* PCI <-> OF binding helpers */
|
|
#ifdef CONFIG_OF
|
|
struct device_node;
|
|
void pci_set_of_node(struct pci_dev *dev);
|
|
void pci_release_of_node(struct pci_dev *dev);
|
|
void pci_set_bus_of_node(struct pci_bus *bus);
|
|
void pci_release_bus_of_node(struct pci_bus *bus);
|
|
|
|
/* Arch may override this (weak) */
|
|
struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus);
|
|
|
|
static inline struct device_node *
|
|
pci_device_to_OF_node(const struct pci_dev *pdev)
|
|
{
|
|
return pdev ? pdev->dev.of_node : NULL;
|
|
}
|
|
|
|
static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
|
|
{
|
|
return bus ? bus->dev.of_node : NULL;
|
|
}
|
|
|
|
#else /* CONFIG_OF */
|
|
static inline void pci_set_of_node(struct pci_dev *dev) { }
|
|
static inline void pci_release_of_node(struct pci_dev *dev) { }
|
|
static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
|
|
static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
|
|
#endif /* CONFIG_OF */
|
|
|
|
#ifdef CONFIG_EEH
|
|
static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
|
|
{
|
|
return pdev->dev.archdata.edev;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device
|
|
* @pdev: the PCI device
|
|
*
|
|
* if the device is PCIE, return NULL
|
|
* if the device isn't connected to a PCIe bridge (that is its parent is a
|
|
* legacy PCI bridge and the bridge is directly connected to bus 0), return its
|
|
* parent
|
|
*/
|
|
struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
|
|
|
|
#endif /* LINUX_PCI_H */
|