linux-stable/kernel/irq/timings.c
Linus Torvalds 7d6e3fa87e Updates to the interrupt core and driver subsystems:
Core changes:
 
    - The usual set of small fixes and improvements all over the place, but nothing
      outstanding
 
 MSI changes:
 
    - Further consolidation of the PCI/MSI interrupt chip code
 
    - Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts
      of platform devices in the same way as PCI exposes them.
 
 Driver changes:
 
    - Support for ARM GICv3 EPPI partitions
 
    - Treewide conversion to generic_handle_domain_irq() for all chained
      interrupt controllers
 
    - Conversion to bitmap_zalloc() throughout the irq chip drivers
 
    - The usual set of small fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmEsnpsTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoS+/EACQdpRkzl3IDIYqThxVZ8KQzp2rKKVn
 qisAQiWg/6koNJx/yYy62KNAUyKjCIObNtRnWi7OAOx6OvNtQTD2WOLAwkh3Pgw1
 8ePYYl55k+yCs8VoITsZM9jYeO+Tk878pU2A6R943zR+g6G7bskGJrxEyZ9TbzIe
 qKfusNKnRY9/jMQaRALUAAtA9VIVR867GqORX5X8hKz8yE2rqlpb4y+1CFba5BTV
 Vlxw7cIXvXBn7BKAom5diRqEGDNJEbX+56jJ7yDZshgLo7m11D7QLw72kmb6TNVC
 g7PchvFi4afpc1ifEAAp0tk4RiSIAQ91nS3n0+jLcLbodOjIkl14eY02ZCJGAP29
 uslyzUbmy1wgejG6CA63JtZ4MYdrf/OSMGuoN78qnOKYcIsWFzOvlJmBWWNW34qW
 LCaUF9QdJ/slXu6B4vIx30GfN9q4myml8bFUobE5q9mBRrEk4R0B7iyBvPu1xKYr
 ZEan67prI5VEu+afJGpp4r294m4HNVkMLfl3nYmE5+y4MoLeMNKDY3IPTvI9iP4G
 kaFgoPvQo23WnuclNYpJ+CaA4aRASlB2nTY+oAXIYfehbey9EW5vq4/EK864ek6w
 oyUTepxxNhE81tG2jpQbf2tR4COsEHy986clxqPP4AvsZXcbypCw8O2FcflpQbHO
 5DLEAfTmp7cziQ==
 =qyll
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Updates to the interrupt core and driver subsystems:

  Core changes:

   - The usual set of small fixes and improvements all over the place,
     but nothing stands out

  MSI changes:

   - Further consolidation of the PCI/MSI interrupt chip code

   - Make MSI sysfs code independent of PCI/MSI and expose the MSI
     interrupts of platform devices in the same way as PCI exposes them.

  Driver changes:

   - Support for ARM GICv3 EPPI partitions

   - Treewide conversion to generic_handle_domain_irq() for all chained
     interrupt controllers

   - Conversion to bitmap_zalloc() throughout the irq chip drivers

   - The usual set of small fixes and improvements"

* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  platform-msi: Add ABI to show msi_irqs of platform devices
  genirq/msi: Move MSI sysfs handling from PCI to MSI core
  genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
  irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
  irqdomain: Export irq_domain_disconnect_hierarchy()
  irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
  irqchip/apple-aic: Fix irq_disable from within irq handlers
  pinctrl/rockchip: drop the gpio related codes
  gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
  gpio/rockchip: support next version gpio controller
  gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
  gpio/rockchip: add driver for rockchip gpio
  dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  pinctrl/rockchip: add pinctrl device to gpio bank struct
  pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
  pinctrl/rockchip: always enable clock for gpio controller
  genirq: Fix kernel doc indentation
  EDAC/altera: Convert to generic_handle_domain_irq()
  powerpc: Bulk conversion to generic_handle_domain_irq()
  nios2: Bulk conversion to generic_handle_domain_irq()
  ...
2021-08-30 14:38:37 -07:00

958 lines
25 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2016, Linaro Ltd - Daniel Lezcano <daniel.lezcano@linaro.org>
#define pr_fmt(fmt) "irq_timings: " fmt
#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/static_key.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/idr.h>
#include <linux/irq.h>
#include <linux/math64.h>
#include <linux/log2.h>
#include <trace/events/irq.h>
#include "internals.h"
DEFINE_STATIC_KEY_FALSE(irq_timing_enabled);
DEFINE_PER_CPU(struct irq_timings, irq_timings);
static DEFINE_IDR(irqt_stats);
void irq_timings_enable(void)
{
static_branch_enable(&irq_timing_enabled);
}
void irq_timings_disable(void)
{
static_branch_disable(&irq_timing_enabled);
}
/*
* The main goal of this algorithm is to predict the next interrupt
* occurrence on the current CPU.
*
* Currently, the interrupt timings are stored in a circular array
* buffer every time there is an interrupt, as a tuple: the interrupt
* number and the associated timestamp when the event occurred <irq,
* timestamp>.
*
* For every interrupt occurring in a short period of time, we can
* measure the elapsed time between the occurrences for the same
* interrupt and we end up with a suite of intervals. The experience
* showed the interrupts are often coming following a periodic
* pattern.
*
* The objective of the algorithm is to find out this periodic pattern
* in a fastest way and use its period to predict the next irq event.
*
* When the next interrupt event is requested, we are in the situation
* where the interrupts are disabled and the circular buffer
* containing the timings is filled with the events which happened
* after the previous next-interrupt-event request.
*
* At this point, we read the circular buffer and we fill the irq
* related statistics structure. After this step, the circular array
* containing the timings is empty because all the values are
* dispatched in their corresponding buffers.
*
* Now for each interrupt, we can predict the next event by using the
* suffix array, log interval and exponential moving average
*
* 1. Suffix array
*
* Suffix array is an array of all the suffixes of a string. It is
* widely used as a data structure for compression, text search, ...
* For instance for the word 'banana', the suffixes will be: 'banana'
* 'anana' 'nana' 'ana' 'na' 'a'
*
* Usually, the suffix array is sorted but for our purpose it is
* not necessary and won't provide any improvement in the context of
* the solved problem where we clearly define the boundaries of the
* search by a max period and min period.
*
* The suffix array will build a suite of intervals of different
* length and will look for the repetition of each suite. If the suite
* is repeating then we have the period because it is the length of
* the suite whatever its position in the buffer.
*
* 2. Log interval
*
* We saw the irq timings allow to compute the interval of the
* occurrences for a specific interrupt. We can reasonably assume the
* longer is the interval, the higher is the error for the next event
* and we can consider storing those interval values into an array
* where each slot in the array correspond to an interval at the power
* of 2 of the index. For example, index 12 will contain values
* between 2^11 and 2^12.
*
* At the end we have an array of values where at each index defines a
* [2^index - 1, 2 ^ index] interval values allowing to store a large
* number of values inside a small array.
*
* For example, if we have the value 1123, then we store it at
* ilog2(1123) = 10 index value.
*
* Storing those value at the specific index is done by computing an
* exponential moving average for this specific slot. For instance,
* for values 1800, 1123, 1453, ... fall under the same slot (10) and
* the exponential moving average is computed every time a new value
* is stored at this slot.
*
* 3. Exponential Moving Average
*
* The EMA is largely used to track a signal for stocks or as a low
* pass filter. The magic of the formula, is it is very simple and the
* reactivity of the average can be tuned with the factors called
* alpha.
*
* The higher the alphas are, the faster the average respond to the
* signal change. In our case, if a slot in the array is a big
* interval, we can have numbers with a big difference between
* them. The impact of those differences in the average computation
* can be tuned by changing the alpha value.
*
*
* -- The algorithm --
*
* We saw the different processing above, now let's see how they are
* used together.
*
* For each interrupt:
* For each interval:
* Compute the index = ilog2(interval)
* Compute a new_ema(buffer[index], interval)
* Store the index in a circular buffer
*
* Compute the suffix array of the indexes
*
* For each suffix:
* If the suffix is reverse-found 3 times
* Return suffix
*
* Return Not found
*
* However we can not have endless suffix array to be build, it won't
* make sense and it will add an extra overhead, so we can restrict
* this to a maximum suffix length of 5 and a minimum suffix length of
* 2. The experience showed 5 is the majority of the maximum pattern
* period found for different devices.
*
* The result is a pattern finding less than 1us for an interrupt.
*
* Example based on real values:
*
* Example 1 : MMC write/read interrupt interval:
*
* 223947, 1240, 1384, 1386, 1386,
* 217416, 1236, 1384, 1386, 1387,
* 214719, 1241, 1386, 1387, 1384,
* 213696, 1234, 1384, 1386, 1388,
* 219904, 1240, 1385, 1389, 1385,
* 212240, 1240, 1386, 1386, 1386,
* 214415, 1236, 1384, 1386, 1387,
* 214276, 1234, 1384, 1388, ?
*
* For each element, apply ilog2(value)
*
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, ?
*
* Max period of 5, we take the last (max_period * 3) 15 elements as
* we can be confident if the pattern repeats itself three times it is
* a repeating pattern.
*
* 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, 8,
* 15, 8, 8, 8, ?
*
* Suffixes are:
*
* 1) 8, 15, 8, 8, 8 <- max period
* 2) 8, 15, 8, 8
* 3) 8, 15, 8
* 4) 8, 15 <- min period
*
* From there we search the repeating pattern for each suffix.
*
* buffer: 8, 15, 8, 8, 8, 8, 15, 8, 8, 8, 8, 15, 8, 8, 8
* | | | | | | | | | | | | | | |
* 8, 15, 8, 8, 8 | | | | | | | | | |
* 8, 15, 8, 8, 8 | | | | |
* 8, 15, 8, 8, 8
*
* When moving the suffix, we found exactly 3 matches.
*
* The first suffix with period 5 is repeating.
*
* The next event is (3 * max_period) % suffix_period
*
* In this example, the result 0, so the next event is suffix[0] => 8
*
* However, 8 is the index in the array of exponential moving average
* which was calculated on the fly when storing the values, so the
* interval is ema[8] = 1366
*
*
* Example 2:
*
* 4, 3, 5, 100,
* 3, 3, 5, 117,
* 4, 4, 5, 112,
* 4, 3, 4, 110,
* 3, 5, 3, 117,
* 4, 4, 5, 112,
* 4, 3, 4, 110,
* 3, 4, 5, 112,
* 4, 3, 4, 110
*
* ilog2
*
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4
*
* Max period 5:
* 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4,
* 0, 0, 0, 4
*
* Suffixes:
*
* 1) 0, 0, 4, 0, 0
* 2) 0, 0, 4, 0
* 3) 0, 0, 4
* 4) 0, 0
*
* buffer: 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4
* | | | | | | X
* 0, 0, 4, 0, 0, | X
* 0, 0
*
* buffer: 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4
* | | | | | | | | | | | | | | |
* 0, 0, 4, 0, | | | | | | | | | | |
* 0, 0, 4, 0, | | | | | | |
* 0, 0, 4, 0, | | |
* 0 0 4
*
* Pattern is found 3 times, the remaining is 1 which results from
* (max_period * 3) % suffix_period. This value is the index in the
* suffix arrays. The suffix array for a period 4 has the value 4
* at index 1.
*/
#define EMA_ALPHA_VAL 64
#define EMA_ALPHA_SHIFT 7
#define PREDICTION_PERIOD_MIN 3
#define PREDICTION_PERIOD_MAX 5
#define PREDICTION_FACTOR 4
#define PREDICTION_MAX 10 /* 2 ^ PREDICTION_MAX useconds */
#define PREDICTION_BUFFER_SIZE 16 /* slots for EMAs, hardly more than 16 */
/*
* Number of elements in the circular buffer: If it happens it was
* flushed before, then the number of elements could be smaller than
* IRQ_TIMINGS_SIZE, so the count is used, otherwise the array size is
* used as we wrapped. The index begins from zero when we did not
* wrap. That could be done in a nicer way with the proper circular
* array structure type but with the cost of extra computation in the
* interrupt handler hot path. We choose efficiency.
*/
#define for_each_irqts(i, irqts) \
for (i = irqts->count < IRQ_TIMINGS_SIZE ? \
0 : irqts->count & IRQ_TIMINGS_MASK, \
irqts->count = min(IRQ_TIMINGS_SIZE, \
irqts->count); \
irqts->count > 0; irqts->count--, \
i = (i + 1) & IRQ_TIMINGS_MASK)
struct irqt_stat {
u64 last_ts;
u64 ema_time[PREDICTION_BUFFER_SIZE];
int timings[IRQ_TIMINGS_SIZE];
int circ_timings[IRQ_TIMINGS_SIZE];
int count;
};
/*
* Exponential moving average computation
*/
static u64 irq_timings_ema_new(u64 value, u64 ema_old)
{
s64 diff;
if (unlikely(!ema_old))
return value;
diff = (value - ema_old) * EMA_ALPHA_VAL;
/*
* We can use a s64 type variable to be added with the u64
* ema_old variable as this one will never have its topmost
* bit set, it will be always smaller than 2^63 nanosec
* interrupt interval (292 years).
*/
return ema_old + (diff >> EMA_ALPHA_SHIFT);
}
static int irq_timings_next_event_index(int *buffer, size_t len, int period_max)
{
int period;
/*
* Move the beginning pointer to the end minus the max period x 3.
* We are at the point we can begin searching the pattern
*/
buffer = &buffer[len - (period_max * 3)];
/* Adjust the length to the maximum allowed period x 3 */
len = period_max * 3;
/*
* The buffer contains the suite of intervals, in a ilog2
* basis, we are looking for a repetition. We point the
* beginning of the search three times the length of the
* period beginning at the end of the buffer. We do that for
* each suffix.
*/
for (period = period_max; period >= PREDICTION_PERIOD_MIN; period--) {
/*
* The first comparison always succeed because the
* suffix is deduced from the first n-period bytes of
* the buffer and we compare the initial suffix with
* itself, so we can skip the first iteration.
*/
int idx = period;
size_t size = period;
/*
* We look if the suite with period 'i' repeat
* itself. If it is truncated at the end, as it
* repeats we can use the period to find out the next
* element with the modulo.
*/
while (!memcmp(buffer, &buffer[idx], size * sizeof(int))) {
/*
* Move the index in a period basis
*/
idx += size;
/*
* If this condition is reached, all previous
* memcmp were successful, so the period is
* found.
*/
if (idx == len)
return buffer[len % period];
/*
* If the remaining elements to compare are
* smaller than the period, readjust the size
* of the comparison for the last iteration.
*/
if (len - idx < period)
size = len - idx;
}
}
return -1;
}
static u64 __irq_timings_next_event(struct irqt_stat *irqs, int irq, u64 now)
{
int index, i, period_max, count, start, min = INT_MAX;
if ((now - irqs->last_ts) >= NSEC_PER_SEC) {
irqs->count = irqs->last_ts = 0;
return U64_MAX;
}
/*
* As we want to find three times the repetition, we need a
* number of intervals greater or equal to three times the
* maximum period, otherwise we truncate the max period.
*/
period_max = irqs->count > (3 * PREDICTION_PERIOD_MAX) ?
PREDICTION_PERIOD_MAX : irqs->count / 3;
/*
* If we don't have enough irq timings for this prediction,
* just bail out.
*/
if (period_max <= PREDICTION_PERIOD_MIN)
return U64_MAX;
/*
* 'count' will depends if the circular buffer wrapped or not
*/
count = irqs->count < IRQ_TIMINGS_SIZE ?
irqs->count : IRQ_TIMINGS_SIZE;
start = irqs->count < IRQ_TIMINGS_SIZE ?
0 : (irqs->count & IRQ_TIMINGS_MASK);
/*
* Copy the content of the circular buffer into another buffer
* in order to linearize the buffer instead of dealing with
* wrapping indexes and shifted array which will be prone to
* error and extremely difficult to debug.
*/
for (i = 0; i < count; i++) {
int index = (start + i) & IRQ_TIMINGS_MASK;
irqs->timings[i] = irqs->circ_timings[index];
min = min_t(int, irqs->timings[i], min);
}
index = irq_timings_next_event_index(irqs->timings, count, period_max);
if (index < 0)
return irqs->last_ts + irqs->ema_time[min];
return irqs->last_ts + irqs->ema_time[index];
}
static __always_inline int irq_timings_interval_index(u64 interval)
{
/*
* The PREDICTION_FACTOR increase the interval size for the
* array of exponential average.
*/
u64 interval_us = (interval >> 10) / PREDICTION_FACTOR;
return likely(interval_us) ? ilog2(interval_us) : 0;
}
static __always_inline void __irq_timings_store(int irq, struct irqt_stat *irqs,
u64 interval)
{
int index;
/*
* Get the index in the ema table for this interrupt.
*/
index = irq_timings_interval_index(interval);
if (index > PREDICTION_BUFFER_SIZE - 1) {
irqs->count = 0;
return;
}
/*
* Store the index as an element of the pattern in another
* circular array.
*/
irqs->circ_timings[irqs->count & IRQ_TIMINGS_MASK] = index;
irqs->ema_time[index] = irq_timings_ema_new(interval,
irqs->ema_time[index]);
irqs->count++;
}
static inline void irq_timings_store(int irq, struct irqt_stat *irqs, u64 ts)
{
u64 old_ts = irqs->last_ts;
u64 interval;
/*
* The timestamps are absolute time values, we need to compute
* the timing interval between two interrupts.
*/
irqs->last_ts = ts;
/*
* The interval type is u64 in order to deal with the same
* type in our computation, that prevent mindfuck issues with
* overflow, sign and division.
*/
interval = ts - old_ts;
/*
* The interrupt triggered more than one second apart, that
* ends the sequence as predictable for our purpose. In this
* case, assume we have the beginning of a sequence and the
* timestamp is the first value. As it is impossible to
* predict anything at this point, return.
*
* Note the first timestamp of the sequence will always fall
* in this test because the old_ts is zero. That is what we
* want as we need another timestamp to compute an interval.
*/
if (interval >= NSEC_PER_SEC) {
irqs->count = 0;
return;
}
__irq_timings_store(irq, irqs, interval);
}
/**
* irq_timings_next_event - Return when the next event is supposed to arrive
*
* During the last busy cycle, the number of interrupts is incremented
* and stored in the irq_timings structure. This information is
* necessary to:
*
* - know if the index in the table wrapped up:
*
* If more than the array size interrupts happened during the
* last busy/idle cycle, the index wrapped up and we have to
* begin with the next element in the array which is the last one
* in the sequence, otherwise it is at the index 0.
*
* - have an indication of the interrupts activity on this CPU
* (eg. irq/sec)
*
* The values are 'consumed' after inserting in the statistical model,
* thus the count is reinitialized.
*
* The array of values **must** be browsed in the time direction, the
* timestamp must increase between an element and the next one.
*
* Returns a nanosec time based estimation of the earliest interrupt,
* U64_MAX otherwise.
*/
u64 irq_timings_next_event(u64 now)
{
struct irq_timings *irqts = this_cpu_ptr(&irq_timings);
struct irqt_stat *irqs;
struct irqt_stat __percpu *s;
u64 ts, next_evt = U64_MAX;
int i, irq = 0;
/*
* This function must be called with the local irq disabled in
* order to prevent the timings circular buffer to be updated
* while we are reading it.
*/
lockdep_assert_irqs_disabled();
if (!irqts->count)
return next_evt;
/*
* Number of elements in the circular buffer: If it happens it
* was flushed before, then the number of elements could be
* smaller than IRQ_TIMINGS_SIZE, so the count is used,
* otherwise the array size is used as we wrapped. The index
* begins from zero when we did not wrap. That could be done
* in a nicer way with the proper circular array structure
* type but with the cost of extra computation in the
* interrupt handler hot path. We choose efficiency.
*
* Inject measured irq/timestamp to the pattern prediction
* model while decrementing the counter because we consume the
* data from our circular buffer.
*/
for_each_irqts(i, irqts) {
irq = irq_timing_decode(irqts->values[i], &ts);
s = idr_find(&irqt_stats, irq);
if (s)
irq_timings_store(irq, this_cpu_ptr(s), ts);
}
/*
* Look in the list of interrupts' statistics, the earliest
* next event.
*/
idr_for_each_entry(&irqt_stats, s, i) {
irqs = this_cpu_ptr(s);
ts = __irq_timings_next_event(irqs, i, now);
if (ts <= now)
return now;
if (ts < next_evt)
next_evt = ts;
}
return next_evt;
}
void irq_timings_free(int irq)
{
struct irqt_stat __percpu *s;
s = idr_find(&irqt_stats, irq);
if (s) {
free_percpu(s);
idr_remove(&irqt_stats, irq);
}
}
int irq_timings_alloc(int irq)
{
struct irqt_stat __percpu *s;
int id;
/*
* Some platforms can have the same private interrupt per cpu,
* so this function may be called several times with the
* same interrupt number. Just bail out in case the per cpu
* stat structure is already allocated.
*/
s = idr_find(&irqt_stats, irq);
if (s)
return 0;
s = alloc_percpu(*s);
if (!s)
return -ENOMEM;
idr_preload(GFP_KERNEL);
id = idr_alloc(&irqt_stats, s, irq, irq + 1, GFP_NOWAIT);
idr_preload_end();
if (id < 0) {
free_percpu(s);
return id;
}
return 0;
}
#ifdef CONFIG_TEST_IRQ_TIMINGS
struct timings_intervals {
u64 *intervals;
size_t count;
};
/*
* Intervals are given in nanosecond base
*/
static u64 intervals0[] __initdata = {
10000, 50000, 200000, 500000,
10000, 50000, 200000, 500000,
10000, 50000, 200000, 500000,
10000, 50000, 200000, 500000,
10000, 50000, 200000, 500000,
10000, 50000, 200000, 500000,
10000, 50000, 200000, 500000,
10000, 50000, 200000, 500000,
10000, 50000, 200000,
};
static u64 intervals1[] __initdata = {
223947000, 1240000, 1384000, 1386000, 1386000,
217416000, 1236000, 1384000, 1386000, 1387000,
214719000, 1241000, 1386000, 1387000, 1384000,
213696000, 1234000, 1384000, 1386000, 1388000,
219904000, 1240000, 1385000, 1389000, 1385000,
212240000, 1240000, 1386000, 1386000, 1386000,
214415000, 1236000, 1384000, 1386000, 1387000,
214276000, 1234000,
};
static u64 intervals2[] __initdata = {
4000, 3000, 5000, 100000,
3000, 3000, 5000, 117000,
4000, 4000, 5000, 112000,
4000, 3000, 4000, 110000,
3000, 5000, 3000, 117000,
4000, 4000, 5000, 112000,
4000, 3000, 4000, 110000,
3000, 4000, 5000, 112000,
4000,
};
static u64 intervals3[] __initdata = {
1385000, 212240000, 1240000,
1386000, 214415000, 1236000,
1384000, 214276000, 1234000,
1386000, 214415000, 1236000,
1385000, 212240000, 1240000,
1386000, 214415000, 1236000,
1384000, 214276000, 1234000,
1386000, 214415000, 1236000,
1385000, 212240000, 1240000,
};
static u64 intervals4[] __initdata = {
10000, 50000, 10000, 50000,
10000, 50000, 10000, 50000,
10000, 50000, 10000, 50000,
10000, 50000, 10000, 50000,
10000, 50000, 10000, 50000,
10000, 50000, 10000, 50000,
10000, 50000, 10000, 50000,
10000, 50000, 10000, 50000,
10000,
};
static struct timings_intervals tis[] __initdata = {
{ intervals0, ARRAY_SIZE(intervals0) },
{ intervals1, ARRAY_SIZE(intervals1) },
{ intervals2, ARRAY_SIZE(intervals2) },
{ intervals3, ARRAY_SIZE(intervals3) },
{ intervals4, ARRAY_SIZE(intervals4) },
};
static int __init irq_timings_test_next_index(struct timings_intervals *ti)
{
int _buffer[IRQ_TIMINGS_SIZE];
int buffer[IRQ_TIMINGS_SIZE];
int index, start, i, count, period_max;
count = ti->count - 1;
period_max = count > (3 * PREDICTION_PERIOD_MAX) ?
PREDICTION_PERIOD_MAX : count / 3;
/*
* Inject all values except the last one which will be used
* to compare with the next index result.
*/
pr_debug("index suite: ");
for (i = 0; i < count; i++) {
index = irq_timings_interval_index(ti->intervals[i]);
_buffer[i & IRQ_TIMINGS_MASK] = index;
pr_cont("%d ", index);
}
start = count < IRQ_TIMINGS_SIZE ? 0 :
count & IRQ_TIMINGS_MASK;
count = min_t(int, count, IRQ_TIMINGS_SIZE);
for (i = 0; i < count; i++) {
int index = (start + i) & IRQ_TIMINGS_MASK;
buffer[i] = _buffer[index];
}
index = irq_timings_next_event_index(buffer, count, period_max);
i = irq_timings_interval_index(ti->intervals[ti->count - 1]);
if (index != i) {
pr_err("Expected (%d) and computed (%d) next indexes differ\n",
i, index);
return -EINVAL;
}
return 0;
}
static int __init irq_timings_next_index_selftest(void)
{
int i, ret;
for (i = 0; i < ARRAY_SIZE(tis); i++) {
pr_info("---> Injecting intervals number #%d (count=%zd)\n",
i, tis[i].count);
ret = irq_timings_test_next_index(&tis[i]);
if (ret)
break;
}
return ret;
}
static int __init irq_timings_test_irqs(struct timings_intervals *ti)
{
struct irqt_stat __percpu *s;
struct irqt_stat *irqs;
int i, index, ret, irq = 0xACE5;
ret = irq_timings_alloc(irq);
if (ret) {
pr_err("Failed to allocate irq timings\n");
return ret;
}
s = idr_find(&irqt_stats, irq);
if (!s) {
ret = -EIDRM;
goto out;
}
irqs = this_cpu_ptr(s);
for (i = 0; i < ti->count; i++) {
index = irq_timings_interval_index(ti->intervals[i]);
pr_debug("%d: interval=%llu ema_index=%d\n",
i, ti->intervals[i], index);
__irq_timings_store(irq, irqs, ti->intervals[i]);
if (irqs->circ_timings[i & IRQ_TIMINGS_MASK] != index) {
ret = -EBADSLT;
pr_err("Failed to store in the circular buffer\n");
goto out;
}
}
if (irqs->count != ti->count) {
ret = -ERANGE;
pr_err("Count differs\n");
goto out;
}
ret = 0;
out:
irq_timings_free(irq);
return ret;
}
static int __init irq_timings_irqs_selftest(void)
{
int i, ret;
for (i = 0; i < ARRAY_SIZE(tis); i++) {
pr_info("---> Injecting intervals number #%d (count=%zd)\n",
i, tis[i].count);
ret = irq_timings_test_irqs(&tis[i]);
if (ret)
break;
}
return ret;
}
static int __init irq_timings_test_irqts(struct irq_timings *irqts,
unsigned count)
{
int start = count >= IRQ_TIMINGS_SIZE ? count - IRQ_TIMINGS_SIZE : 0;
int i, irq, oirq = 0xBEEF;
u64 ots = 0xDEAD, ts;
/*
* Fill the circular buffer by using the dedicated function.
*/
for (i = 0; i < count; i++) {
pr_debug("%d: index=%d, ts=%llX irq=%X\n",
i, i & IRQ_TIMINGS_MASK, ots + i, oirq + i);
irq_timings_push(ots + i, oirq + i);
}
/*
* Compute the first elements values after the index wrapped
* up or not.
*/
ots += start;
oirq += start;
/*
* Test the circular buffer count is correct.
*/
pr_debug("---> Checking timings array count (%d) is right\n", count);
if (WARN_ON(irqts->count != count))
return -EINVAL;
/*
* Test the macro allowing to browse all the irqts.
*/
pr_debug("---> Checking the for_each_irqts() macro\n");
for_each_irqts(i, irqts) {
irq = irq_timing_decode(irqts->values[i], &ts);
pr_debug("index=%d, ts=%llX / %llX, irq=%X / %X\n",
i, ts, ots, irq, oirq);
if (WARN_ON(ts != ots || irq != oirq))
return -EINVAL;
ots++; oirq++;
}
/*
* The circular buffer should have be flushed when browsed
* with for_each_irqts
*/
pr_debug("---> Checking timings array is empty after browsing it\n");
if (WARN_ON(irqts->count))
return -EINVAL;
return 0;
}
static int __init irq_timings_irqts_selftest(void)
{
struct irq_timings *irqts = this_cpu_ptr(&irq_timings);
int i, ret;
/*
* Test the circular buffer with different number of
* elements. The purpose is to test at the limits (empty, half
* full, full, wrapped with the cursor at the boundaries,
* wrapped several times, etc ...
*/
int count[] = { 0,
IRQ_TIMINGS_SIZE >> 1,
IRQ_TIMINGS_SIZE,
IRQ_TIMINGS_SIZE + (IRQ_TIMINGS_SIZE >> 1),
2 * IRQ_TIMINGS_SIZE,
(2 * IRQ_TIMINGS_SIZE) + 3,
};
for (i = 0; i < ARRAY_SIZE(count); i++) {
pr_info("---> Checking the timings with %d/%d values\n",
count[i], IRQ_TIMINGS_SIZE);
ret = irq_timings_test_irqts(irqts, count[i]);
if (ret)
break;
}
return ret;
}
static int __init irq_timings_selftest(void)
{
int ret;
pr_info("------------------- selftest start -----------------\n");
/*
* At this point, we don't except any subsystem to use the irq
* timings but us, so it should not be enabled.
*/
if (static_branch_unlikely(&irq_timing_enabled)) {
pr_warn("irq timings already initialized, skipping selftest\n");
return 0;
}
ret = irq_timings_irqts_selftest();
if (ret)
goto out;
ret = irq_timings_irqs_selftest();
if (ret)
goto out;
ret = irq_timings_next_index_selftest();
out:
pr_info("---------- selftest end with %s -----------\n",
ret ? "failure" : "success");
return ret;
}
early_initcall(irq_timings_selftest);
#endif