linux-stable/fs/proc/array.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

742 lines
20 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/proc/array.c
*
* Copyright (C) 1992 by Linus Torvalds
* based on ideas by Darren Senn
*
* Fixes:
* Michael. K. Johnson: stat,statm extensions.
* <johnsonm@stolaf.edu>
*
* Pauline Middelink : Made cmdline,envline only break at '\0's, to
* make sure SET_PROCTITLE works. Also removed
* bad '!' which forced address recalculation for
* EVERY character on the current page.
* <middelin@polyware.iaf.nl>
*
* Danny ter Haar : added cpuinfo
* <dth@cistron.nl>
*
* Alessandro Rubini : profile extension.
* <rubini@ipvvis.unipv.it>
*
* Jeff Tranter : added BogoMips field to cpuinfo
* <Jeff_Tranter@Mitel.COM>
*
* Bruno Haible : remove 4K limit for the maps file
* <haible@ma2s2.mathematik.uni-karlsruhe.de>
*
* Yves Arrouye : remove removal of trailing spaces in get_array.
* <Yves.Arrouye@marin.fdn.fr>
*
* Jerome Forissier : added per-CPU time information to /proc/stat
* and /proc/<pid>/cpu extension
* <forissier@isia.cma.fr>
* - Incorporation and non-SMP safe operation
* of forissier patch in 2.1.78 by
* Hans Marcus <crowbar@concepts.nl>
*
* aeb@cwi.nl : /proc/partitions
*
*
* Alan Cox : security fixes.
* <alan@lxorguk.ukuu.org.uk>
*
* Al Viro : safe handling of mm_struct
*
* Gerhard Wichert : added BIGMEM support
* Siemens AG <Gerhard.Wichert@pdb.siemens.de>
*
* Al Viro & Jeff Garzik : moved most of the thing into base.c and
* : proc_misc.c. The rest may eventually go into
* : base.c too.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/mman.h>
#include <linux/sched/mm.h>
#include <linux/sched/numa_balancing.h>
#include <linux/sched/task_stack.h>
#include <linux/sched/task.h>
#include <linux/sched/cputime.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/signal.h>
#include <linux/highmem.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/times.h>
#include <linux/cpuset.h>
#include <linux/rcupdate.h>
#include <linux/delayacct.h>
#include <linux/seq_file.h>
#include <linux/pid_namespace.h>
#include <linux/ptrace.h>
#include <linux/tracehook.h>
#include <linux/string_helpers.h>
#include <linux/user_namespace.h>
#include <linux/fs_struct.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include "internal.h"
static inline void task_name(struct seq_file *m, struct task_struct *p)
{
char *buf;
size_t size;
char tcomm[sizeof(p->comm)];
int ret;
get_task_comm(tcomm, p);
seq_puts(m, "Name:\t");
size = seq_get_buf(m, &buf);
ret = string_escape_str(tcomm, buf, size, ESCAPE_SPACE | ESCAPE_SPECIAL, "\n\\");
seq_commit(m, ret < size ? ret : -1);
seq_putc(m, '\n');
}
/*
* The task state array is a strange "bitmap" of
* reasons to sleep. Thus "running" is zero, and
* you can test for combinations of others with
* simple bit tests.
*/
static const char * const task_state_array[] = {
/* states in TASK_REPORT: */
"R (running)", /* 0x00 */
"S (sleeping)", /* 0x01 */
"D (disk sleep)", /* 0x02 */
"T (stopped)", /* 0x04 */
"t (tracing stop)", /* 0x08 */
"X (dead)", /* 0x10 */
"Z (zombie)", /* 0x20 */
"P (parked)", /* 0x40 */
/* states beyond TASK_REPORT: */
"I (idle)", /* 0x80 */
};
static inline const char *get_task_state(struct task_struct *tsk)
{
BUILD_BUG_ON(1 + ilog2(TASK_REPORT_MAX) != ARRAY_SIZE(task_state_array));
return task_state_array[__get_task_state(tsk)];
}
static inline int get_task_umask(struct task_struct *tsk)
{
struct fs_struct *fs;
int umask = -ENOENT;
task_lock(tsk);
fs = tsk->fs;
if (fs)
umask = fs->umask;
task_unlock(tsk);
return umask;
}
static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *p)
{
struct user_namespace *user_ns = seq_user_ns(m);
struct group_info *group_info;
int g, umask;
struct task_struct *tracer;
const struct cred *cred;
pid_t ppid, tpid = 0, tgid, ngid;
unsigned int max_fds = 0;
rcu_read_lock();
ppid = pid_alive(p) ?
task_tgid_nr_ns(rcu_dereference(p->real_parent), ns) : 0;
tracer = ptrace_parent(p);
if (tracer)
tpid = task_pid_nr_ns(tracer, ns);
tgid = task_tgid_nr_ns(p, ns);
ngid = task_numa_group_id(p);
cred = get_task_cred(p);
umask = get_task_umask(p);
if (umask >= 0)
seq_printf(m, "Umask:\t%#04o\n", umask);
task_lock(p);
if (p->files)
max_fds = files_fdtable(p->files)->max_fds;
task_unlock(p);
rcu_read_unlock();
seq_printf(m, "State:\t%s", get_task_state(p));
seq_put_decimal_ull(m, "\nTgid:\t", tgid);
seq_put_decimal_ull(m, "\nNgid:\t", ngid);
seq_put_decimal_ull(m, "\nPid:\t", pid_nr_ns(pid, ns));
seq_put_decimal_ull(m, "\nPPid:\t", ppid);
seq_put_decimal_ull(m, "\nTracerPid:\t", tpid);
seq_put_decimal_ull(m, "\nUid:\t", from_kuid_munged(user_ns, cred->uid));
seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->euid));
seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->suid));
seq_put_decimal_ull(m, "\t", from_kuid_munged(user_ns, cred->fsuid));
seq_put_decimal_ull(m, "\nGid:\t", from_kgid_munged(user_ns, cred->gid));
seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->egid));
seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->sgid));
seq_put_decimal_ull(m, "\t", from_kgid_munged(user_ns, cred->fsgid));
seq_put_decimal_ull(m, "\nFDSize:\t", max_fds);
seq_puts(m, "\nGroups:\t");
group_info = cred->group_info;
for (g = 0; g < group_info->ngroups; g++)
seq_put_decimal_ull(m, g ? " " : "",
from_kgid_munged(user_ns, group_info->gid[g]));
put_cred(cred);
/* Trailing space shouldn't have been added in the first place. */
seq_putc(m, ' ');
#ifdef CONFIG_PID_NS
seq_puts(m, "\nNStgid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_tgid_nr_ns(p, pid->numbers[g].ns));
seq_puts(m, "\nNSpid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_pid_nr_ns(p, pid->numbers[g].ns));
seq_puts(m, "\nNSpgid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_pgrp_nr_ns(p, pid->numbers[g].ns));
seq_puts(m, "\nNSsid:");
for (g = ns->level; g <= pid->level; g++)
seq_put_decimal_ull(m, "\t", task_session_nr_ns(p, pid->numbers[g].ns));
#endif
seq_putc(m, '\n');
}
void render_sigset_t(struct seq_file *m, const char *header,
sigset_t *set)
{
int i;
seq_puts(m, header);
i = _NSIG;
do {
int x = 0;
i -= 4;
if (sigismember(set, i+1)) x |= 1;
if (sigismember(set, i+2)) x |= 2;
if (sigismember(set, i+3)) x |= 4;
if (sigismember(set, i+4)) x |= 8;
seq_putc(m, hex_asc[x]);
} while (i >= 4);
seq_putc(m, '\n');
}
static void collect_sigign_sigcatch(struct task_struct *p, sigset_t *ign,
sigset_t *catch)
{
struct k_sigaction *k;
int i;
k = p->sighand->action;
for (i = 1; i <= _NSIG; ++i, ++k) {
if (k->sa.sa_handler == SIG_IGN)
sigaddset(ign, i);
else if (k->sa.sa_handler != SIG_DFL)
sigaddset(catch, i);
}
}
static inline void task_sig(struct seq_file *m, struct task_struct *p)
{
unsigned long flags;
sigset_t pending, shpending, blocked, ignored, caught;
int num_threads = 0;
unsigned long qsize = 0;
unsigned long qlim = 0;
sigemptyset(&pending);
sigemptyset(&shpending);
sigemptyset(&blocked);
sigemptyset(&ignored);
sigemptyset(&caught);
if (lock_task_sighand(p, &flags)) {
pending = p->pending.signal;
shpending = p->signal->shared_pending.signal;
blocked = p->blocked;
collect_sigign_sigcatch(p, &ignored, &caught);
num_threads = get_nr_threads(p);
rcu_read_lock(); /* FIXME: is this correct? */
qsize = atomic_read(&__task_cred(p)->user->sigpending);
rcu_read_unlock();
qlim = task_rlimit(p, RLIMIT_SIGPENDING);
unlock_task_sighand(p, &flags);
}
seq_put_decimal_ull(m, "Threads:\t", num_threads);
seq_put_decimal_ull(m, "\nSigQ:\t", qsize);
seq_put_decimal_ull(m, "/", qlim);
/* render them all */
render_sigset_t(m, "\nSigPnd:\t", &pending);
render_sigset_t(m, "ShdPnd:\t", &shpending);
render_sigset_t(m, "SigBlk:\t", &blocked);
render_sigset_t(m, "SigIgn:\t", &ignored);
render_sigset_t(m, "SigCgt:\t", &caught);
}
static void render_cap_t(struct seq_file *m, const char *header,
kernel_cap_t *a)
{
unsigned __capi;
seq_puts(m, header);
CAP_FOR_EACH_U32(__capi) {
seq_printf(m, "%08x",
a->cap[CAP_LAST_U32 - __capi]);
}
seq_putc(m, '\n');
}
static inline void task_cap(struct seq_file *m, struct task_struct *p)
{
const struct cred *cred;
kernel_cap_t cap_inheritable, cap_permitted, cap_effective,
cap_bset, cap_ambient;
rcu_read_lock();
cred = __task_cred(p);
cap_inheritable = cred->cap_inheritable;
cap_permitted = cred->cap_permitted;
cap_effective = cred->cap_effective;
cap_bset = cred->cap_bset;
cap_ambient = cred->cap_ambient;
rcu_read_unlock();
render_cap_t(m, "CapInh:\t", &cap_inheritable);
render_cap_t(m, "CapPrm:\t", &cap_permitted);
render_cap_t(m, "CapEff:\t", &cap_effective);
render_cap_t(m, "CapBnd:\t", &cap_bset);
render_cap_t(m, "CapAmb:\t", &cap_ambient);
}
static inline void task_seccomp(struct seq_file *m, struct task_struct *p)
{
seq_put_decimal_ull(m, "NoNewPrivs:\t", task_no_new_privs(p));
#ifdef CONFIG_SECCOMP
seq_put_decimal_ull(m, "\nSeccomp:\t", p->seccomp.mode);
#endif
seq_putc(m, '\n');
}
static inline void task_context_switch_counts(struct seq_file *m,
struct task_struct *p)
{
seq_put_decimal_ull(m, "voluntary_ctxt_switches:\t", p->nvcsw);
seq_put_decimal_ull(m, "\nnonvoluntary_ctxt_switches:\t", p->nivcsw);
seq_putc(m, '\n');
}
static void task_cpus_allowed(struct seq_file *m, struct task_struct *task)
{
seq_printf(m, "Cpus_allowed:\t%*pb\n",
cpumask_pr_args(&task->cpus_allowed));
seq_printf(m, "Cpus_allowed_list:\t%*pbl\n",
cpumask_pr_args(&task->cpus_allowed));
}
int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
struct mm_struct *mm = get_task_mm(task);
task_name(m, task);
task_state(m, ns, pid, task);
if (mm) {
task_mem(m, mm);
mmput(mm);
}
task_sig(m, task);
task_cap(m, task);
task_seccomp(m, task);
task_cpus_allowed(m, task);
cpuset_task_status_allowed(m, task);
task_context_switch_counts(m, task);
return 0;
}
static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task, int whole)
{
unsigned long vsize, eip, esp, wchan = 0;
int priority, nice;
int tty_pgrp = -1, tty_nr = 0;
sigset_t sigign, sigcatch;
char state;
pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
int permitted;
struct mm_struct *mm;
unsigned long long start_time;
unsigned long cmin_flt = 0, cmaj_flt = 0;
unsigned long min_flt = 0, maj_flt = 0;
u64 cutime, cstime, utime, stime;
u64 cgtime, gtime;
unsigned long rsslim = 0;
char tcomm[sizeof(task->comm)];
unsigned long flags;
state = *get_task_state(task);
vsize = eip = esp = 0;
permitted = ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS | PTRACE_MODE_NOAUDIT);
mm = get_task_mm(task);
if (mm) {
vsize = task_vsize(mm);
/*
* esp and eip are intentionally zeroed out. There is no
* non-racy way to read them without freezing the task.
* Programs that need reliable values can use ptrace(2).
*
* The only exception is if the task is core dumping because
* a program is not able to use ptrace(2) in that case. It is
* safe because the task has stopped executing permanently.
*/
if (permitted && (task->flags & PF_DUMPCORE)) {
eip = KSTK_EIP(task);
esp = KSTK_ESP(task);
}
}
get_task_comm(tcomm, task);
sigemptyset(&sigign);
sigemptyset(&sigcatch);
cutime = cstime = utime = stime = 0;
cgtime = gtime = 0;
if (lock_task_sighand(task, &flags)) {
struct signal_struct *sig = task->signal;
if (sig->tty) {
struct pid *pgrp = tty_get_pgrp(sig->tty);
tty_pgrp = pid_nr_ns(pgrp, ns);
put_pid(pgrp);
tty_nr = new_encode_dev(tty_devnum(sig->tty));
}
num_threads = get_nr_threads(task);
collect_sigign_sigcatch(task, &sigign, &sigcatch);
cmin_flt = sig->cmin_flt;
cmaj_flt = sig->cmaj_flt;
cutime = sig->cutime;
cstime = sig->cstime;
cgtime = sig->cgtime;
rsslim = ACCESS_ONCE(sig->rlim[RLIMIT_RSS].rlim_cur);
/* add up live thread stats at the group level */
if (whole) {
struct task_struct *t = task;
do {
min_flt += t->min_flt;
maj_flt += t->maj_flt;
gtime += task_gtime(t);
} while_each_thread(task, t);
min_flt += sig->min_flt;
maj_flt += sig->maj_flt;
thread_group_cputime_adjusted(task, &utime, &stime);
gtime += sig->gtime;
}
sid = task_session_nr_ns(task, ns);
ppid = task_tgid_nr_ns(task->real_parent, ns);
pgid = task_pgrp_nr_ns(task, ns);
unlock_task_sighand(task, &flags);
}
if (permitted && (!whole || num_threads < 2))
wchan = get_wchan(task);
if (!whole) {
min_flt = task->min_flt;
maj_flt = task->maj_flt;
task_cputime_adjusted(task, &utime, &stime);
gtime = task_gtime(task);
}
/* scale priority and nice values from timeslices to -20..20 */
/* to make it look like a "normal" Unix priority/nice value */
priority = task_prio(task);
nice = task_nice(task);
/* convert nsec -> ticks */
start_time = nsec_to_clock_t(task->real_start_time);
seq_printf(m, "%d (%s) %c", pid_nr_ns(pid, ns), tcomm, state);
seq_put_decimal_ll(m, " ", ppid);
seq_put_decimal_ll(m, " ", pgid);
seq_put_decimal_ll(m, " ", sid);
seq_put_decimal_ll(m, " ", tty_nr);
seq_put_decimal_ll(m, " ", tty_pgrp);
seq_put_decimal_ull(m, " ", task->flags);
seq_put_decimal_ull(m, " ", min_flt);
seq_put_decimal_ull(m, " ", cmin_flt);
seq_put_decimal_ull(m, " ", maj_flt);
seq_put_decimal_ull(m, " ", cmaj_flt);
seq_put_decimal_ull(m, " ", nsec_to_clock_t(utime));
seq_put_decimal_ull(m, " ", nsec_to_clock_t(stime));
seq_put_decimal_ll(m, " ", nsec_to_clock_t(cutime));
seq_put_decimal_ll(m, " ", nsec_to_clock_t(cstime));
seq_put_decimal_ll(m, " ", priority);
seq_put_decimal_ll(m, " ", nice);
seq_put_decimal_ll(m, " ", num_threads);
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ull(m, " ", start_time);
seq_put_decimal_ull(m, " ", vsize);
seq_put_decimal_ull(m, " ", mm ? get_mm_rss(mm) : 0);
seq_put_decimal_ull(m, " ", rsslim);
seq_put_decimal_ull(m, " ", mm ? (permitted ? mm->start_code : 1) : 0);
seq_put_decimal_ull(m, " ", mm ? (permitted ? mm->end_code : 1) : 0);
seq_put_decimal_ull(m, " ", (permitted && mm) ? mm->start_stack : 0);
seq_put_decimal_ull(m, " ", esp);
seq_put_decimal_ull(m, " ", eip);
/* The signal information here is obsolete.
* It must be decimal for Linux 2.0 compatibility.
* Use /proc/#/status for real-time signals.
*/
seq_put_decimal_ull(m, " ", task->pending.signal.sig[0] & 0x7fffffffUL);
seq_put_decimal_ull(m, " ", task->blocked.sig[0] & 0x7fffffffUL);
seq_put_decimal_ull(m, " ", sigign.sig[0] & 0x7fffffffUL);
seq_put_decimal_ull(m, " ", sigcatch.sig[0] & 0x7fffffffUL);
/*
* We used to output the absolute kernel address, but that's an
* information leak - so instead we show a 0/1 flag here, to signal
* to user-space whether there's a wchan field in /proc/PID/wchan.
*
* This works with older implementations of procps as well.
*/
if (wchan)
seq_puts(m, " 1");
else
seq_puts(m, " 0");
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ll(m, " ", task->exit_signal);
seq_put_decimal_ll(m, " ", task_cpu(task));
seq_put_decimal_ull(m, " ", task->rt_priority);
seq_put_decimal_ull(m, " ", task->policy);
seq_put_decimal_ull(m, " ", delayacct_blkio_ticks(task));
seq_put_decimal_ull(m, " ", nsec_to_clock_t(gtime));
seq_put_decimal_ll(m, " ", nsec_to_clock_t(cgtime));
if (mm && permitted) {
seq_put_decimal_ull(m, " ", mm->start_data);
seq_put_decimal_ull(m, " ", mm->end_data);
seq_put_decimal_ull(m, " ", mm->start_brk);
seq_put_decimal_ull(m, " ", mm->arg_start);
seq_put_decimal_ull(m, " ", mm->arg_end);
seq_put_decimal_ull(m, " ", mm->env_start);
seq_put_decimal_ull(m, " ", mm->env_end);
} else
seq_puts(m, " 0 0 0 0 0 0 0");
if (permitted)
seq_put_decimal_ll(m, " ", task->exit_code);
else
seq_puts(m, " 0");
seq_putc(m, '\n');
if (mm)
mmput(mm);
return 0;
}
int proc_tid_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
return do_task_stat(m, ns, pid, task, 0);
}
int proc_tgid_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
return do_task_stat(m, ns, pid, task, 1);
}
int proc_pid_statm(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
{
unsigned long size = 0, resident = 0, shared = 0, text = 0, data = 0;
struct mm_struct *mm = get_task_mm(task);
if (mm) {
size = task_statm(mm, &shared, &text, &data, &resident);
mmput(mm);
}
/*
* For quick read, open code by putting numbers directly
* expected format is
* seq_printf(m, "%lu %lu %lu %lu 0 %lu 0\n",
* size, resident, shared, text, data);
*/
seq_put_decimal_ull(m, "", size);
seq_put_decimal_ull(m, " ", resident);
seq_put_decimal_ull(m, " ", shared);
seq_put_decimal_ull(m, " ", text);
seq_put_decimal_ull(m, " ", 0);
seq_put_decimal_ull(m, " ", data);
seq_put_decimal_ull(m, " ", 0);
seq_putc(m, '\n');
return 0;
}
#ifdef CONFIG_PROC_CHILDREN
static struct pid *
get_children_pid(struct inode *inode, struct pid *pid_prev, loff_t pos)
{
struct task_struct *start, *task;
struct pid *pid = NULL;
read_lock(&tasklist_lock);
start = pid_task(proc_pid(inode), PIDTYPE_PID);
if (!start)
goto out;
/*
* Lets try to continue searching first, this gives
* us significant speedup on children-rich processes.
*/
if (pid_prev) {
task = pid_task(pid_prev, PIDTYPE_PID);
if (task && task->real_parent == start &&
!(list_empty(&task->sibling))) {
if (list_is_last(&task->sibling, &start->children))
goto out;
task = list_first_entry(&task->sibling,
struct task_struct, sibling);
pid = get_pid(task_pid(task));
goto out;
}
}
/*
* Slow search case.
*
* We might miss some children here if children
* are exited while we were not holding the lock,
* but it was never promised to be accurate that
* much.
*
* "Just suppose that the parent sleeps, but N children
* exit after we printed their tids. Now the slow paths
* skips N extra children, we miss N tasks." (c)
*
* So one need to stop or freeze the leader and all
* its children to get a precise result.
*/
list_for_each_entry(task, &start->children, sibling) {
if (pos-- == 0) {
pid = get_pid(task_pid(task));
break;
}
}
out:
read_unlock(&tasklist_lock);
return pid;
}
static int children_seq_show(struct seq_file *seq, void *v)
{
struct inode *inode = seq->private;
pid_t pid;
pid = pid_nr_ns(v, inode->i_sb->s_fs_info);
seq_printf(seq, "%d ", pid);
return 0;
}
static void *children_seq_start(struct seq_file *seq, loff_t *pos)
{
return get_children_pid(seq->private, NULL, *pos);
}
static void *children_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct pid *pid;
pid = get_children_pid(seq->private, v, *pos + 1);
put_pid(v);
++*pos;
return pid;
}
static void children_seq_stop(struct seq_file *seq, void *v)
{
put_pid(v);
}
static const struct seq_operations children_seq_ops = {
.start = children_seq_start,
.next = children_seq_next,
.stop = children_seq_stop,
.show = children_seq_show,
};
static int children_seq_open(struct inode *inode, struct file *file)
{
struct seq_file *m;
int ret;
ret = seq_open(file, &children_seq_ops);
if (ret)
return ret;
m = file->private_data;
m->private = inode;
return ret;
}
int children_seq_release(struct inode *inode, struct file *file)
{
seq_release(inode, file);
return 0;
}
const struct file_operations proc_tid_children_operations = {
.open = children_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = children_seq_release,
};
#endif /* CONFIG_PROC_CHILDREN */