linux-stable/fs/btrfs/ordered-data.h
Naohiro Aota d8e3fb106f btrfs: zoned: use ZONE_APPEND write for zoned mode
Enable zone append writing for zoned mode. When using zone append, a
bio is issued to the start of a target zone and the device decides to
place it inside the zone. Upon completion the device reports the actual
written position back to the host.

Three parts are necessary to enable zone append mode. First, modify the
bio to use REQ_OP_ZONE_APPEND in btrfs_submit_bio_hook() and adjust the
bi_sector to point the beginning of the zone.

Second, record the returned physical address (and disk/partno) to the
ordered extent in end_bio_extent_writepage() after the bio has been
completed. We cannot resolve the physical address to the logical address
because we can neither take locks nor allocate a buffer in this end_bio
context. So, we need to record the physical address to resolve it later
in btrfs_finish_ordered_io().

And finally, rewrite the logical addresses of the extent mapping and
checksum data according to the physical address using btrfs_rmap_block.
If the returned address matches the originally allocated address, we can
skip this rewriting process.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-09 02:46:06 +01:00

217 lines
6.3 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2007 Oracle. All rights reserved.
*/
#ifndef BTRFS_ORDERED_DATA_H
#define BTRFS_ORDERED_DATA_H
/* one of these per inode */
struct btrfs_ordered_inode_tree {
spinlock_t lock;
struct rb_root tree;
struct rb_node *last;
};
struct btrfs_ordered_sum {
/* bytenr is the start of this extent on disk */
u64 bytenr;
/*
* this is the length in bytes covered by the sums array below.
*/
int len;
struct list_head list;
/* last field is a variable length array of csums */
u8 sums[];
};
/*
* Bits for btrfs_ordered_extent::flags.
*
* BTRFS_ORDERED_IO_DONE is set when all of the blocks are written.
* It is used to make sure metadata is inserted into the tree only once
* per extent.
*
* BTRFS_ORDERED_COMPLETE is set when the extent is removed from the
* rbtree, just before waking any waiters. It is used to indicate the
* IO is done and any metadata is inserted into the tree.
*/
enum {
/*
* Different types for direct io, one and only one of the 4 type can
* be set when creating ordered extent.
*
* REGULAR: For regular non-compressed COW write
* NOCOW: For NOCOW write into existing non-hole extent
* PREALLOC: For NOCOW write into preallocated extent
* COMPRESSED: For compressed COW write
*/
BTRFS_ORDERED_REGULAR,
BTRFS_ORDERED_NOCOW,
BTRFS_ORDERED_PREALLOC,
BTRFS_ORDERED_COMPRESSED,
/*
* Extra bit for direct io, can only be set for
* REGULAR/NOCOW/PREALLOC. No direct io for compressed extent.
*/
BTRFS_ORDERED_DIRECT,
/* Extra status bits for ordered extents */
/* set when all the pages are written */
BTRFS_ORDERED_IO_DONE,
/* set when removed from the tree */
BTRFS_ORDERED_COMPLETE,
/* We had an io error when writing this out */
BTRFS_ORDERED_IOERR,
/* Set when we have to truncate an extent */
BTRFS_ORDERED_TRUNCATED,
/* Used during fsync to track already logged extents */
BTRFS_ORDERED_LOGGED,
/* We have already logged all the csums of the ordered extent */
BTRFS_ORDERED_LOGGED_CSUM,
/* We wait for this extent to complete in the current transaction */
BTRFS_ORDERED_PENDING,
};
struct btrfs_ordered_extent {
/* logical offset in the file */
u64 file_offset;
/*
* These fields directly correspond to the same fields in
* btrfs_file_extent_item.
*/
u64 disk_bytenr;
u64 num_bytes;
u64 disk_num_bytes;
/* number of bytes that still need writing */
u64 bytes_left;
/*
* the end of the ordered extent which is behind it but
* didn't update disk_i_size. Please see the comment of
* btrfs_ordered_update_i_size();
*/
u64 outstanding_isize;
/*
* If we get truncated we need to adjust the file extent we enter for
* this ordered extent so that we do not expose stale data.
*/
u64 truncated_len;
/* flags (described above) */
unsigned long flags;
/* compression algorithm */
int compress_type;
/* Qgroup reserved space */
int qgroup_rsv;
/* reference count */
refcount_t refs;
/* the inode we belong to */
struct inode *inode;
/* list of checksums for insertion when the extent io is done */
struct list_head list;
/* used for fast fsyncs */
struct list_head log_list;
/* used to wait for the BTRFS_ORDERED_COMPLETE bit */
wait_queue_head_t wait;
/* our friendly rbtree entry */
struct rb_node rb_node;
/* a per root list of all the pending ordered extents */
struct list_head root_extent_list;
struct btrfs_work work;
struct completion completion;
struct btrfs_work flush_work;
struct list_head work_list;
/*
* Used to reverse-map physical address returned from ZONE_APPEND write
* command in a workqueue context
*/
u64 physical;
struct gendisk *disk;
u8 partno;
};
/*
* calculates the total size you need to allocate for an ordered sum
* structure spanning 'bytes' in the file
*/
static inline int btrfs_ordered_sum_size(struct btrfs_fs_info *fs_info,
unsigned long bytes)
{
int num_sectors = (int)DIV_ROUND_UP(bytes, fs_info->sectorsize);
return sizeof(struct btrfs_ordered_sum) + num_sectors * fs_info->csum_size;
}
static inline void
btrfs_ordered_inode_tree_init(struct btrfs_ordered_inode_tree *t)
{
spin_lock_init(&t->lock);
t->tree = RB_ROOT;
t->last = NULL;
}
void btrfs_put_ordered_extent(struct btrfs_ordered_extent *entry);
void btrfs_remove_ordered_extent(struct btrfs_inode *btrfs_inode,
struct btrfs_ordered_extent *entry);
bool btrfs_dec_test_ordered_pending(struct btrfs_inode *inode,
struct btrfs_ordered_extent **cached,
u64 file_offset, u64 io_size, int uptodate);
bool btrfs_dec_test_first_ordered_pending(struct btrfs_inode *inode,
struct btrfs_ordered_extent **finished_ret,
u64 *file_offset, u64 io_size,
int uptodate);
int btrfs_add_ordered_extent(struct btrfs_inode *inode, u64 file_offset,
u64 disk_bytenr, u64 num_bytes, u64 disk_num_bytes,
int type);
int btrfs_add_ordered_extent_dio(struct btrfs_inode *inode, u64 file_offset,
u64 disk_bytenr, u64 num_bytes,
u64 disk_num_bytes, int type);
int btrfs_add_ordered_extent_compress(struct btrfs_inode *inode, u64 file_offset,
u64 disk_bytenr, u64 num_bytes,
u64 disk_num_bytes, int compress_type);
void btrfs_add_ordered_sum(struct btrfs_ordered_extent *entry,
struct btrfs_ordered_sum *sum);
struct btrfs_ordered_extent *btrfs_lookup_ordered_extent(struct btrfs_inode *inode,
u64 file_offset);
void btrfs_start_ordered_extent(struct btrfs_ordered_extent *entry, int wait);
int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len);
struct btrfs_ordered_extent *
btrfs_lookup_first_ordered_extent(struct btrfs_inode *inode, u64 file_offset);
struct btrfs_ordered_extent *btrfs_lookup_ordered_range(
struct btrfs_inode *inode,
u64 file_offset,
u64 len);
void btrfs_get_ordered_extents_for_logging(struct btrfs_inode *inode,
struct list_head *list);
u64 btrfs_wait_ordered_extents(struct btrfs_root *root, u64 nr,
const u64 range_start, const u64 range_len);
void btrfs_wait_ordered_roots(struct btrfs_fs_info *fs_info, u64 nr,
const u64 range_start, const u64 range_len);
void btrfs_lock_and_flush_ordered_range(struct btrfs_inode *inode, u64 start,
u64 end,
struct extent_state **cached_state);
int btrfs_split_ordered_extent(struct btrfs_ordered_extent *ordered, u64 pre,
u64 post);
int __init ordered_data_init(void);
void __cold ordered_data_exit(void);
#endif