mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
b6a4e209fb
TFA9897 has an internal 'rcv' switch so that it can manage both loudspeaker and earpiece modes with the same physical speaker. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20211024085840.1536438-3-vincent.knecht@mailoo.org Signed-off-by: Mark Brown <broonie@kernel.org>
378 lines
11 KiB
C
378 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2021 Stephan Gerhold
|
|
*
|
|
* Register definitions/sequences taken from various tfa98xx kernel drivers:
|
|
* Copyright (C) 2014-2020 NXP Semiconductors, All Rights Reserved.
|
|
* Copyright (C) 2013 Sony Mobile Communications Inc.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <sound/soc.h>
|
|
|
|
#define TFA989X_STATUSREG 0x00
|
|
#define TFA989X_BATTERYVOLTAGE 0x01
|
|
#define TFA989X_TEMPERATURE 0x02
|
|
#define TFA989X_REVISIONNUMBER 0x03
|
|
#define TFA989X_REVISIONNUMBER_REV_MSK GENMASK(7, 0) /* device revision */
|
|
#define TFA989X_I2SREG 0x04
|
|
#define TFA989X_I2SREG_RCV 2 /* receiver mode */
|
|
#define TFA989X_I2SREG_CHSA 6 /* amplifier input select */
|
|
#define TFA989X_I2SREG_CHSA_MSK GENMASK(7, 6)
|
|
#define TFA989X_I2SREG_I2SSR 12 /* sample rate */
|
|
#define TFA989X_I2SREG_I2SSR_MSK GENMASK(15, 12)
|
|
#define TFA989X_BAT_PROT 0x05
|
|
#define TFA989X_AUDIO_CTR 0x06
|
|
#define TFA989X_DCDCBOOST 0x07
|
|
#define TFA989X_SPKR_CALIBRATION 0x08
|
|
#define TFA989X_SYS_CTRL 0x09
|
|
#define TFA989X_SYS_CTRL_PWDN 0 /* power down */
|
|
#define TFA989X_SYS_CTRL_I2CR 1 /* I2C reset */
|
|
#define TFA989X_SYS_CTRL_CFE 2 /* enable CoolFlux DSP */
|
|
#define TFA989X_SYS_CTRL_AMPE 3 /* enable amplifier */
|
|
#define TFA989X_SYS_CTRL_DCA 4 /* enable boost */
|
|
#define TFA989X_SYS_CTRL_SBSL 5 /* DSP configured */
|
|
#define TFA989X_SYS_CTRL_AMPC 6 /* amplifier enabled by DSP */
|
|
#define TFA989X_I2S_SEL_REG 0x0a
|
|
#define TFA989X_I2S_SEL_REG_SPKR_MSK GENMASK(10, 9) /* speaker impedance */
|
|
#define TFA989X_I2S_SEL_REG_DCFG_MSK GENMASK(14, 11) /* DCDC compensation */
|
|
#define TFA989X_PWM_CONTROL 0x41
|
|
#define TFA989X_CURRENTSENSE1 0x46
|
|
#define TFA989X_CURRENTSENSE2 0x47
|
|
#define TFA989X_CURRENTSENSE3 0x48
|
|
#define TFA989X_CURRENTSENSE4 0x49
|
|
|
|
#define TFA9895_REVISION 0x12
|
|
#define TFA9897_REVISION 0x97
|
|
|
|
struct tfa989x_rev {
|
|
unsigned int rev;
|
|
int (*init)(struct regmap *regmap);
|
|
};
|
|
|
|
struct tfa989x {
|
|
const struct tfa989x_rev *rev;
|
|
struct regulator *vddd_supply;
|
|
};
|
|
|
|
static bool tfa989x_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg > TFA989X_REVISIONNUMBER;
|
|
}
|
|
|
|
static bool tfa989x_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg < TFA989X_REVISIONNUMBER;
|
|
}
|
|
|
|
static const struct regmap_config tfa989x_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
|
|
.writeable_reg = tfa989x_writeable_reg,
|
|
.volatile_reg = tfa989x_volatile_reg,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static const char * const chsa_text[] = { "Left", "Right", /* "DSP" */ };
|
|
static SOC_ENUM_SINGLE_DECL(chsa_enum, TFA989X_I2SREG, TFA989X_I2SREG_CHSA, chsa_text);
|
|
static const struct snd_kcontrol_new chsa_mux = SOC_DAPM_ENUM("Amp Input", chsa_enum);
|
|
|
|
static const struct snd_soc_dapm_widget tfa989x_dapm_widgets[] = {
|
|
SND_SOC_DAPM_OUTPUT("OUT"),
|
|
SND_SOC_DAPM_SUPPLY("POWER", TFA989X_SYS_CTRL, TFA989X_SYS_CTRL_PWDN, 1, NULL, 0),
|
|
SND_SOC_DAPM_OUT_DRV("AMPE", TFA989X_SYS_CTRL, TFA989X_SYS_CTRL_AMPE, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MUX("Amp Input", SND_SOC_NOPM, 0, 0, &chsa_mux),
|
|
SND_SOC_DAPM_AIF_IN("AIFINL", "HiFi Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_IN("AIFINR", "HiFi Playback", 1, SND_SOC_NOPM, 0, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route tfa989x_dapm_routes[] = {
|
|
{"OUT", NULL, "AMPE"},
|
|
{"AMPE", NULL, "POWER"},
|
|
{"AMPE", NULL, "Amp Input"},
|
|
{"Amp Input", "Left", "AIFINL"},
|
|
{"Amp Input", "Right", "AIFINR"},
|
|
};
|
|
|
|
static const char * const mode_text[] = { "Speaker", "Receiver" };
|
|
static SOC_ENUM_SINGLE_DECL(mode_enum, TFA989X_I2SREG, TFA989X_I2SREG_RCV, mode_text);
|
|
static const struct snd_kcontrol_new tfa989x_mode_controls[] = {
|
|
SOC_ENUM("Mode", mode_enum),
|
|
};
|
|
|
|
static int tfa989x_probe(struct snd_soc_component *component)
|
|
{
|
|
struct tfa989x *tfa989x = snd_soc_component_get_drvdata(component);
|
|
|
|
if (tfa989x->rev->rev == TFA9897_REVISION)
|
|
return snd_soc_add_component_controls(component, tfa989x_mode_controls,
|
|
ARRAY_SIZE(tfa989x_mode_controls));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_component_driver tfa989x_component = {
|
|
.probe = tfa989x_probe,
|
|
.dapm_widgets = tfa989x_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(tfa989x_dapm_widgets),
|
|
.dapm_routes = tfa989x_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(tfa989x_dapm_routes),
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static const unsigned int tfa989x_rates[] = {
|
|
8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000
|
|
};
|
|
|
|
static int tfa989x_find_sample_rate(unsigned int rate)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tfa989x_rates); ++i)
|
|
if (tfa989x_rates[i] == rate)
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int tfa989x_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
int sr;
|
|
|
|
sr = tfa989x_find_sample_rate(params_rate(params));
|
|
if (sr < 0)
|
|
return sr;
|
|
|
|
return snd_soc_component_update_bits(component, TFA989X_I2SREG,
|
|
TFA989X_I2SREG_I2SSR_MSK,
|
|
sr << TFA989X_I2SREG_I2SSR);
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops tfa989x_dai_ops = {
|
|
.hw_params = tfa989x_hw_params,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver tfa989x_dai = {
|
|
.name = "tfa989x-hifi",
|
|
.playback = {
|
|
.stream_name = "HiFi Playback",
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
.rate_min = 8000,
|
|
.rate_max = 48000,
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
},
|
|
.ops = &tfa989x_dai_ops,
|
|
};
|
|
|
|
static const struct reg_sequence tfa9895_reg_init[] = {
|
|
/* some other registers must be set for optimal amplifier behaviour */
|
|
{ TFA989X_BAT_PROT, 0x13ab },
|
|
{ TFA989X_AUDIO_CTR, 0x001f },
|
|
|
|
/* peak voltage protection is always on, but may be written */
|
|
{ TFA989X_SPKR_CALIBRATION, 0x3c4e },
|
|
|
|
/* TFA989X_SYSCTRL_DCA = 0 */
|
|
{ TFA989X_SYS_CTRL, 0x024d },
|
|
{ TFA989X_PWM_CONTROL, 0x0308 },
|
|
{ TFA989X_CURRENTSENSE4, 0x0e82 },
|
|
};
|
|
|
|
static int tfa9895_init(struct regmap *regmap)
|
|
{
|
|
return regmap_multi_reg_write(regmap, tfa9895_reg_init,
|
|
ARRAY_SIZE(tfa9895_reg_init));
|
|
}
|
|
|
|
static const struct tfa989x_rev tfa9895_rev = {
|
|
.rev = TFA9895_REVISION,
|
|
.init = tfa9895_init,
|
|
};
|
|
|
|
static int tfa9897_init(struct regmap *regmap)
|
|
{
|
|
int ret;
|
|
|
|
/* Reduce slewrate by clearing iddqtestbst to avoid booster damage */
|
|
ret = regmap_write(regmap, TFA989X_CURRENTSENSE3, 0x0300);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable clipping */
|
|
ret = regmap_clear_bits(regmap, TFA989X_CURRENTSENSE4, 0x1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set required TDM configuration */
|
|
return regmap_write(regmap, 0x14, 0x0);
|
|
}
|
|
|
|
static const struct tfa989x_rev tfa9897_rev = {
|
|
.rev = TFA9897_REVISION,
|
|
.init = tfa9897_init,
|
|
};
|
|
|
|
/*
|
|
* Note: At the moment this driver bypasses the "CoolFlux DSP" built into the
|
|
* TFA989X amplifiers. Unfortunately, there seems to be absolutely
|
|
* no documentation for it - the public "short datasheets" do not provide
|
|
* any information about the DSP or available registers.
|
|
*
|
|
* Usually the TFA989X amplifiers are configured through proprietary userspace
|
|
* libraries. There are also some (rather complex) kernel drivers but even those
|
|
* rely on obscure firmware blobs for configuration (so-called "containers").
|
|
* They seem to contain different "profiles" with tuned speaker settings, sample
|
|
* rates and volume steps (which would be better exposed as separate ALSA mixers).
|
|
*
|
|
* Bypassing the DSP disables volume control (and perhaps some speaker
|
|
* optimization?), but at least allows using the speaker without obscure
|
|
* kernel drivers and firmware.
|
|
*
|
|
* Ideally NXP (or now Goodix) should release proper documentation for these
|
|
* amplifiers so that support for the "CoolFlux DSP" can be implemented properly.
|
|
*/
|
|
static int tfa989x_dsp_bypass(struct regmap *regmap)
|
|
{
|
|
int ret;
|
|
|
|
/* Clear CHSA to bypass DSP and take input from I2S 1 left channel */
|
|
ret = regmap_clear_bits(regmap, TFA989X_I2SREG, TFA989X_I2SREG_CHSA_MSK);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set DCDC compensation to off and speaker impedance to 8 ohm */
|
|
ret = regmap_update_bits(regmap, TFA989X_I2S_SEL_REG,
|
|
TFA989X_I2S_SEL_REG_DCFG_MSK |
|
|
TFA989X_I2S_SEL_REG_SPKR_MSK,
|
|
TFA989X_I2S_SEL_REG_SPKR_MSK);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Set DCDC to follower mode and disable CoolFlux DSP */
|
|
return regmap_clear_bits(regmap, TFA989X_SYS_CTRL,
|
|
BIT(TFA989X_SYS_CTRL_DCA) |
|
|
BIT(TFA989X_SYS_CTRL_CFE) |
|
|
BIT(TFA989X_SYS_CTRL_AMPC));
|
|
}
|
|
|
|
static void tfa989x_regulator_disable(void *data)
|
|
{
|
|
struct tfa989x *tfa989x = data;
|
|
|
|
regulator_disable(tfa989x->vddd_supply);
|
|
}
|
|
|
|
static int tfa989x_i2c_probe(struct i2c_client *i2c)
|
|
{
|
|
struct device *dev = &i2c->dev;
|
|
const struct tfa989x_rev *rev;
|
|
struct tfa989x *tfa989x;
|
|
struct regmap *regmap;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
rev = device_get_match_data(dev);
|
|
if (!rev) {
|
|
dev_err(dev, "unknown device revision\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
tfa989x = devm_kzalloc(dev, sizeof(*tfa989x), GFP_KERNEL);
|
|
if (!tfa989x)
|
|
return -ENOMEM;
|
|
|
|
tfa989x->rev = rev;
|
|
i2c_set_clientdata(i2c, tfa989x);
|
|
|
|
tfa989x->vddd_supply = devm_regulator_get(dev, "vddd");
|
|
if (IS_ERR(tfa989x->vddd_supply))
|
|
return dev_err_probe(dev, PTR_ERR(tfa989x->vddd_supply),
|
|
"Failed to get vddd regulator\n");
|
|
|
|
regmap = devm_regmap_init_i2c(i2c, &tfa989x_regmap);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
ret = regulator_enable(tfa989x->vddd_supply);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable vddd regulator: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(dev, tfa989x_regulator_disable, tfa989x);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Bypass regcache for reset and init sequence */
|
|
regcache_cache_bypass(regmap, true);
|
|
|
|
/* Dummy read to generate i2c clocks, required on some devices */
|
|
regmap_read(regmap, TFA989X_REVISIONNUMBER, &val);
|
|
|
|
ret = regmap_read(regmap, TFA989X_REVISIONNUMBER, &val);
|
|
if (ret) {
|
|
dev_err(dev, "failed to read revision number: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
val &= TFA989X_REVISIONNUMBER_REV_MSK;
|
|
if (val != rev->rev) {
|
|
dev_err(dev, "invalid revision number, expected %#x, got %#x\n",
|
|
rev->rev, val);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = regmap_write(regmap, TFA989X_SYS_CTRL, BIT(TFA989X_SYS_CTRL_I2CR));
|
|
if (ret) {
|
|
dev_err(dev, "failed to reset I2C registers: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rev->init(regmap);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize registers: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = tfa989x_dsp_bypass(regmap);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable DSP bypass: %d\n", ret);
|
|
return ret;
|
|
}
|
|
regcache_cache_bypass(regmap, false);
|
|
|
|
return devm_snd_soc_register_component(dev, &tfa989x_component,
|
|
&tfa989x_dai, 1);
|
|
}
|
|
|
|
static const struct of_device_id tfa989x_of_match[] = {
|
|
{ .compatible = "nxp,tfa9895", .data = &tfa9895_rev },
|
|
{ .compatible = "nxp,tfa9897", .data = &tfa9897_rev },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tfa989x_of_match);
|
|
|
|
static struct i2c_driver tfa989x_i2c_driver = {
|
|
.driver = {
|
|
.name = "tfa989x",
|
|
.of_match_table = tfa989x_of_match,
|
|
},
|
|
.probe_new = tfa989x_i2c_probe,
|
|
};
|
|
module_i2c_driver(tfa989x_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC NXP/Goodix TFA989X (TFA1) driver");
|
|
MODULE_AUTHOR("Stephan Gerhold <stephan@gerhold.net>");
|
|
MODULE_LICENSE("GPL");
|