mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Guenter Roeck](/assets/img/avatar_default.png)
Add support for Texas Instruments TMP464 and TMP468 temperature sensor ICs. TI's TMP464 is an I2C temperature sensor chip. This chip is similar to TI's TMP421 chip, but with 16bit-wide registers (instead of 8bit-wide registers). The chip has one local sensor and four remote sensors. TMP468 is similar to TMP464 but has one local and eight remote sensors. Originally-from: Agathe Porte <agathe.porte@nokia.com> Cc: Agathe Porte <agathe.porte@nokia.com> Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com> Tested-by: Agathe Porte <agathe.porte@nokia.com> Link: https://lore.kernel.org/r/20220222223610.23098-2-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
73 lines
1.6 KiB
ReStructuredText
73 lines
1.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
Kernel driver tmp464
|
|
====================
|
|
|
|
Supported chips:
|
|
|
|
* Texas Instruments TMP464
|
|
|
|
Prefix: 'tmp464'
|
|
|
|
Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
|
|
|
|
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp464.html
|
|
|
|
* Texas Instruments TMP468
|
|
|
|
Prefix: 'tmp468'
|
|
|
|
Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
|
|
|
|
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp468.html
|
|
|
|
Authors:
|
|
|
|
Agathe Porte <agathe.porte@nokia.com>
|
|
Guenter Roeck <linux@roeck-us.net>
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements support for Texas Instruments TMP464 and TMP468
|
|
temperature sensor chips. TMP464 provides one local and four remote
|
|
sensors. TMP468 provides one local and eight remote sensors.
|
|
Temperature is measured in degrees Celsius. The chips are wired over
|
|
I2C/SMBus and specified over a temperature range of -40 to +125 degrees
|
|
Celsius. Resolution for both the local and remote channels is 0.0625
|
|
degree C.
|
|
|
|
The chips support only temperature measurements. The driver exports
|
|
temperature values, limits, and alarms via the following sysfs files:
|
|
|
|
**temp[1-9]_input**
|
|
|
|
**temp[1-9]_max**
|
|
|
|
**temp[1-9]_max_hyst**
|
|
|
|
**temp[1-9]_max_alarm**
|
|
|
|
**temp[1-9]_crit**
|
|
|
|
**temp[1-9]_crit_alarm**
|
|
|
|
**temp[1-9]_crit_hyst**
|
|
|
|
**temp[2-9]_offset**
|
|
|
|
**temp[2-9]_fault**
|
|
|
|
Each sensor can be individually disabled via Devicetree or from sysfs
|
|
via:
|
|
|
|
**temp[1-9]_enable**
|
|
|
|
If labels were specified in Devicetree, additional sysfs files will
|
|
be present:
|
|
|
|
**temp[1-9]_label**
|
|
|
|
The update interval is configurable with the following sysfs attribute.
|
|
|
|
**update_interval**
|