linux-stable/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
Alexander Shiyan c14ceb4298 ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash
This patch adds name for NOR flash. This keeps compatibility for
commandline partitions parsing from old bootloaders and make name
of device same for DT and non-DT boot.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutonix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:31 +08:00

179 lines
3.4 KiB
Text

/*
* Copyright 2012 Sascha Hauer, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx27.dtsi"
/ {
model = "Phytec pcm038";
compatible = "phytec,imx27-pcm038", "fsl,imx27";
memory {
reg = <0x0 0x0>;
};
soc {
aipi@10000000 { /* aipi1 */
serial@1000a000 {
status = "okay";
};
i2c@1001d000 {
clock-frequency = <400000>;
status = "okay";
at24@52 {
compatible = "at,24c32";
pagesize = <32>;
reg = <0x52>;
};
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
lm75@4a {
compatible = "national,lm75";
reg = <0x4a>;
};
};
};
aipi@10020000 { /* aipi2 */
ethernet@1002b000 {
phy-reset-gpios = <&gpio3 30 0>;
status = "okay";
};
};
};
nor_flash@c0000000 {
compatible = "cfi-flash";
bank-width = <2>;
reg = <0xc0000000 0x02000000>;
linux,mtd-name = "physmap-flash.0";
#address-cells = <1>;
#size-cells = <1>;
};
};
&cspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 28 0>;
status = "okay";
pmic: mc13783@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mc13783";
spi-max-frequency = <20000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <23 0x4>;
fsl,mc13xxx-uses-adc;
fsl,mc13xxx-uses-rtc;
regulators {
sw1a_reg: sw1a {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
sw1b_reg: sw1b {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
sw2a_reg: sw2a {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
sw2b_reg: sw2b {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
sw3_reg: sw3 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vaudio_reg: vaudio {
regulator-always-on;
regulator-boot-on;
};
violo_reg: violo {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
viohi_reg: viohi {
regulator-always-on;
regulator-boot-on;
};
vgen_reg: vgen {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
vcam_reg: vcam {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vrf1_reg: vrf1 {
regulator-min-microvolt = <2775000>;
regulator-max-microvolt = <2775000>;
regulator-always-on;
regulator-boot-on;
};
vrf2_reg: vrf2 {
regulator-min-microvolt = <2775000>;
regulator-max-microvolt = <2775000>;
regulator-always-on;
regulator-boot-on;
};
vmmc1_reg: vmmc1 {
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3000000>;
};
gpo1_reg: gpo1 { };
pwgt1spi_reg: pwgt1spi {
regulator-always-on;
};
};
};
};
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
status = "okay";
};