mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits) PCI: update for owner removal from struct device_attribute PCI: Fix warnings when CONFIG_DMI unset PCI: Do not run NVidia quirks related to MSI with MSI disabled x86/PCI: use for_each_pci_dev() PCI: use for_each_pci_dev() PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc() PCI: export SMBIOS provided firmware instance and label to sysfs PCI: Allow read/write access to sysfs I/O port resources x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY} PCI: disable mmio during bar sizing PCI: MSI: Remove unsafe and unnecessary hardware access PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable PCI: kernel oops on access to pci proc file while hot-removal PCI: pci-sysfs: remove casts from void* ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe PCI hotplug: make sure child bridges are enabled at hotplug time PCI hotplug: shpchp: Removed check for hotplug of display devices PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device PCI: Don't enable aspm before drivers have had a chance to veto it ...
3061 lines
78 KiB
C
3061 lines
78 KiB
C
/*
|
|
* PCI Bus Services, see include/linux/pci.h for further explanation.
|
|
*
|
|
* Copyright 1993 -- 1997 Drew Eckhardt, Frederic Potter,
|
|
* David Mosberger-Tang
|
|
*
|
|
* Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/string.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/pci-aspm.h>
|
|
#include <linux/pm_wakeup.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <asm/setup.h>
|
|
#include "pci.h"
|
|
|
|
const char *pci_power_names[] = {
|
|
"error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
|
|
};
|
|
EXPORT_SYMBOL_GPL(pci_power_names);
|
|
|
|
int isa_dma_bridge_buggy;
|
|
EXPORT_SYMBOL(isa_dma_bridge_buggy);
|
|
|
|
int pci_pci_problems;
|
|
EXPORT_SYMBOL(pci_pci_problems);
|
|
|
|
unsigned int pci_pm_d3_delay;
|
|
|
|
static void pci_dev_d3_sleep(struct pci_dev *dev)
|
|
{
|
|
unsigned int delay = dev->d3_delay;
|
|
|
|
if (delay < pci_pm_d3_delay)
|
|
delay = pci_pm_d3_delay;
|
|
|
|
msleep(delay);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_DOMAINS
|
|
int pci_domains_supported = 1;
|
|
#endif
|
|
|
|
#define DEFAULT_CARDBUS_IO_SIZE (256)
|
|
#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
|
|
/* pci=cbmemsize=nnM,cbiosize=nn can override this */
|
|
unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
|
|
unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
|
|
|
|
#define DEFAULT_HOTPLUG_IO_SIZE (256)
|
|
#define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024)
|
|
/* pci=hpmemsize=nnM,hpiosize=nn can override this */
|
|
unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
|
|
unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
|
|
|
|
/*
|
|
* The default CLS is used if arch didn't set CLS explicitly and not
|
|
* all pci devices agree on the same value. Arch can override either
|
|
* the dfl or actual value as it sees fit. Don't forget this is
|
|
* measured in 32-bit words, not bytes.
|
|
*/
|
|
u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2;
|
|
u8 pci_cache_line_size;
|
|
|
|
/**
|
|
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
|
|
* @bus: pointer to PCI bus structure to search
|
|
*
|
|
* Given a PCI bus, returns the highest PCI bus number present in the set
|
|
* including the given PCI bus and its list of child PCI buses.
|
|
*/
|
|
unsigned char pci_bus_max_busnr(struct pci_bus* bus)
|
|
{
|
|
struct list_head *tmp;
|
|
unsigned char max, n;
|
|
|
|
max = bus->subordinate;
|
|
list_for_each(tmp, &bus->children) {
|
|
n = pci_bus_max_busnr(pci_bus_b(tmp));
|
|
if(n > max)
|
|
max = n;
|
|
}
|
|
return max;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
|
|
|
|
#ifdef CONFIG_HAS_IOMEM
|
|
void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
|
|
{
|
|
/*
|
|
* Make sure the BAR is actually a memory resource, not an IO resource
|
|
*/
|
|
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
|
|
WARN_ON(1);
|
|
return NULL;
|
|
}
|
|
return ioremap_nocache(pci_resource_start(pdev, bar),
|
|
pci_resource_len(pdev, bar));
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_ioremap_bar);
|
|
#endif
|
|
|
|
#if 0
|
|
/**
|
|
* pci_max_busnr - returns maximum PCI bus number
|
|
*
|
|
* Returns the highest PCI bus number present in the system global list of
|
|
* PCI buses.
|
|
*/
|
|
unsigned char __devinit
|
|
pci_max_busnr(void)
|
|
{
|
|
struct pci_bus *bus = NULL;
|
|
unsigned char max, n;
|
|
|
|
max = 0;
|
|
while ((bus = pci_find_next_bus(bus)) != NULL) {
|
|
n = pci_bus_max_busnr(bus);
|
|
if(n > max)
|
|
max = n;
|
|
}
|
|
return max;
|
|
}
|
|
|
|
#endif /* 0 */
|
|
|
|
#define PCI_FIND_CAP_TTL 48
|
|
|
|
static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
|
|
u8 pos, int cap, int *ttl)
|
|
{
|
|
u8 id;
|
|
|
|
while ((*ttl)--) {
|
|
pci_bus_read_config_byte(bus, devfn, pos, &pos);
|
|
if (pos < 0x40)
|
|
break;
|
|
pos &= ~3;
|
|
pci_bus_read_config_byte(bus, devfn, pos + PCI_CAP_LIST_ID,
|
|
&id);
|
|
if (id == 0xff)
|
|
break;
|
|
if (id == cap)
|
|
return pos;
|
|
pos += PCI_CAP_LIST_NEXT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __pci_find_next_cap(struct pci_bus *bus, unsigned int devfn,
|
|
u8 pos, int cap)
|
|
{
|
|
int ttl = PCI_FIND_CAP_TTL;
|
|
|
|
return __pci_find_next_cap_ttl(bus, devfn, pos, cap, &ttl);
|
|
}
|
|
|
|
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap)
|
|
{
|
|
return __pci_find_next_cap(dev->bus, dev->devfn,
|
|
pos + PCI_CAP_LIST_NEXT, cap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_find_next_capability);
|
|
|
|
static int __pci_bus_find_cap_start(struct pci_bus *bus,
|
|
unsigned int devfn, u8 hdr_type)
|
|
{
|
|
u16 status;
|
|
|
|
pci_bus_read_config_word(bus, devfn, PCI_STATUS, &status);
|
|
if (!(status & PCI_STATUS_CAP_LIST))
|
|
return 0;
|
|
|
|
switch (hdr_type) {
|
|
case PCI_HEADER_TYPE_NORMAL:
|
|
case PCI_HEADER_TYPE_BRIDGE:
|
|
return PCI_CAPABILITY_LIST;
|
|
case PCI_HEADER_TYPE_CARDBUS:
|
|
return PCI_CB_CAPABILITY_LIST;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_find_capability - query for devices' capabilities
|
|
* @dev: PCI device to query
|
|
* @cap: capability code
|
|
*
|
|
* Tell if a device supports a given PCI capability.
|
|
* Returns the address of the requested capability structure within the
|
|
* device's PCI configuration space or 0 in case the device does not
|
|
* support it. Possible values for @cap:
|
|
*
|
|
* %PCI_CAP_ID_PM Power Management
|
|
* %PCI_CAP_ID_AGP Accelerated Graphics Port
|
|
* %PCI_CAP_ID_VPD Vital Product Data
|
|
* %PCI_CAP_ID_SLOTID Slot Identification
|
|
* %PCI_CAP_ID_MSI Message Signalled Interrupts
|
|
* %PCI_CAP_ID_CHSWP CompactPCI HotSwap
|
|
* %PCI_CAP_ID_PCIX PCI-X
|
|
* %PCI_CAP_ID_EXP PCI Express
|
|
*/
|
|
int pci_find_capability(struct pci_dev *dev, int cap)
|
|
{
|
|
int pos;
|
|
|
|
pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
|
|
if (pos)
|
|
pos = __pci_find_next_cap(dev->bus, dev->devfn, pos, cap);
|
|
|
|
return pos;
|
|
}
|
|
|
|
/**
|
|
* pci_bus_find_capability - query for devices' capabilities
|
|
* @bus: the PCI bus to query
|
|
* @devfn: PCI device to query
|
|
* @cap: capability code
|
|
*
|
|
* Like pci_find_capability() but works for pci devices that do not have a
|
|
* pci_dev structure set up yet.
|
|
*
|
|
* Returns the address of the requested capability structure within the
|
|
* device's PCI configuration space or 0 in case the device does not
|
|
* support it.
|
|
*/
|
|
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
|
|
{
|
|
int pos;
|
|
u8 hdr_type;
|
|
|
|
pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type);
|
|
|
|
pos = __pci_bus_find_cap_start(bus, devfn, hdr_type & 0x7f);
|
|
if (pos)
|
|
pos = __pci_find_next_cap(bus, devfn, pos, cap);
|
|
|
|
return pos;
|
|
}
|
|
|
|
/**
|
|
* pci_find_ext_capability - Find an extended capability
|
|
* @dev: PCI device to query
|
|
* @cap: capability code
|
|
*
|
|
* Returns the address of the requested extended capability structure
|
|
* within the device's PCI configuration space or 0 if the device does
|
|
* not support it. Possible values for @cap:
|
|
*
|
|
* %PCI_EXT_CAP_ID_ERR Advanced Error Reporting
|
|
* %PCI_EXT_CAP_ID_VC Virtual Channel
|
|
* %PCI_EXT_CAP_ID_DSN Device Serial Number
|
|
* %PCI_EXT_CAP_ID_PWR Power Budgeting
|
|
*/
|
|
int pci_find_ext_capability(struct pci_dev *dev, int cap)
|
|
{
|
|
u32 header;
|
|
int ttl;
|
|
int pos = PCI_CFG_SPACE_SIZE;
|
|
|
|
/* minimum 8 bytes per capability */
|
|
ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
|
|
|
|
if (dev->cfg_size <= PCI_CFG_SPACE_SIZE)
|
|
return 0;
|
|
|
|
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
|
|
return 0;
|
|
|
|
/*
|
|
* If we have no capabilities, this is indicated by cap ID,
|
|
* cap version and next pointer all being 0.
|
|
*/
|
|
if (header == 0)
|
|
return 0;
|
|
|
|
while (ttl-- > 0) {
|
|
if (PCI_EXT_CAP_ID(header) == cap)
|
|
return pos;
|
|
|
|
pos = PCI_EXT_CAP_NEXT(header);
|
|
if (pos < PCI_CFG_SPACE_SIZE)
|
|
break;
|
|
|
|
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_find_ext_capability);
|
|
|
|
/**
|
|
* pci_bus_find_ext_capability - find an extended capability
|
|
* @bus: the PCI bus to query
|
|
* @devfn: PCI device to query
|
|
* @cap: capability code
|
|
*
|
|
* Like pci_find_ext_capability() but works for pci devices that do not have a
|
|
* pci_dev structure set up yet.
|
|
*
|
|
* Returns the address of the requested capability structure within the
|
|
* device's PCI configuration space or 0 in case the device does not
|
|
* support it.
|
|
*/
|
|
int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
|
|
int cap)
|
|
{
|
|
u32 header;
|
|
int ttl;
|
|
int pos = PCI_CFG_SPACE_SIZE;
|
|
|
|
/* minimum 8 bytes per capability */
|
|
ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
|
|
|
|
if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
|
|
return 0;
|
|
if (header == 0xffffffff || header == 0)
|
|
return 0;
|
|
|
|
while (ttl-- > 0) {
|
|
if (PCI_EXT_CAP_ID(header) == cap)
|
|
return pos;
|
|
|
|
pos = PCI_EXT_CAP_NEXT(header);
|
|
if (pos < PCI_CFG_SPACE_SIZE)
|
|
break;
|
|
|
|
if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
|
|
{
|
|
int rc, ttl = PCI_FIND_CAP_TTL;
|
|
u8 cap, mask;
|
|
|
|
if (ht_cap == HT_CAPTYPE_SLAVE || ht_cap == HT_CAPTYPE_HOST)
|
|
mask = HT_3BIT_CAP_MASK;
|
|
else
|
|
mask = HT_5BIT_CAP_MASK;
|
|
|
|
pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn, pos,
|
|
PCI_CAP_ID_HT, &ttl);
|
|
while (pos) {
|
|
rc = pci_read_config_byte(dev, pos + 3, &cap);
|
|
if (rc != PCIBIOS_SUCCESSFUL)
|
|
return 0;
|
|
|
|
if ((cap & mask) == ht_cap)
|
|
return pos;
|
|
|
|
pos = __pci_find_next_cap_ttl(dev->bus, dev->devfn,
|
|
pos + PCI_CAP_LIST_NEXT,
|
|
PCI_CAP_ID_HT, &ttl);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
/**
|
|
* pci_find_next_ht_capability - query a device's Hypertransport capabilities
|
|
* @dev: PCI device to query
|
|
* @pos: Position from which to continue searching
|
|
* @ht_cap: Hypertransport capability code
|
|
*
|
|
* To be used in conjunction with pci_find_ht_capability() to search for
|
|
* all capabilities matching @ht_cap. @pos should always be a value returned
|
|
* from pci_find_ht_capability().
|
|
*
|
|
* NB. To be 100% safe against broken PCI devices, the caller should take
|
|
* steps to avoid an infinite loop.
|
|
*/
|
|
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap)
|
|
{
|
|
return __pci_find_next_ht_cap(dev, pos + PCI_CAP_LIST_NEXT, ht_cap);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_find_next_ht_capability);
|
|
|
|
/**
|
|
* pci_find_ht_capability - query a device's Hypertransport capabilities
|
|
* @dev: PCI device to query
|
|
* @ht_cap: Hypertransport capability code
|
|
*
|
|
* Tell if a device supports a given Hypertransport capability.
|
|
* Returns an address within the device's PCI configuration space
|
|
* or 0 in case the device does not support the request capability.
|
|
* The address points to the PCI capability, of type PCI_CAP_ID_HT,
|
|
* which has a Hypertransport capability matching @ht_cap.
|
|
*/
|
|
int pci_find_ht_capability(struct pci_dev *dev, int ht_cap)
|
|
{
|
|
int pos;
|
|
|
|
pos = __pci_bus_find_cap_start(dev->bus, dev->devfn, dev->hdr_type);
|
|
if (pos)
|
|
pos = __pci_find_next_ht_cap(dev, pos, ht_cap);
|
|
|
|
return pos;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_find_ht_capability);
|
|
|
|
/**
|
|
* pci_find_parent_resource - return resource region of parent bus of given region
|
|
* @dev: PCI device structure contains resources to be searched
|
|
* @res: child resource record for which parent is sought
|
|
*
|
|
* For given resource region of given device, return the resource
|
|
* region of parent bus the given region is contained in or where
|
|
* it should be allocated from.
|
|
*/
|
|
struct resource *
|
|
pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
|
|
{
|
|
const struct pci_bus *bus = dev->bus;
|
|
int i;
|
|
struct resource *best = NULL, *r;
|
|
|
|
pci_bus_for_each_resource(bus, r, i) {
|
|
if (!r)
|
|
continue;
|
|
if (res->start && !(res->start >= r->start && res->end <= r->end))
|
|
continue; /* Not contained */
|
|
if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
|
|
continue; /* Wrong type */
|
|
if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH))
|
|
return r; /* Exact match */
|
|
/* We can't insert a non-prefetch resource inside a prefetchable parent .. */
|
|
if (r->flags & IORESOURCE_PREFETCH)
|
|
continue;
|
|
/* .. but we can put a prefetchable resource inside a non-prefetchable one */
|
|
if (!best)
|
|
best = r;
|
|
}
|
|
return best;
|
|
}
|
|
|
|
/**
|
|
* pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
|
|
* @dev: PCI device to have its BARs restored
|
|
*
|
|
* Restore the BAR values for a given device, so as to make it
|
|
* accessible by its driver.
|
|
*/
|
|
static void
|
|
pci_restore_bars(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_BRIDGE_RESOURCES; i++)
|
|
pci_update_resource(dev, i);
|
|
}
|
|
|
|
static struct pci_platform_pm_ops *pci_platform_pm;
|
|
|
|
int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
|
|
{
|
|
if (!ops->is_manageable || !ops->set_state || !ops->choose_state
|
|
|| !ops->sleep_wake || !ops->can_wakeup)
|
|
return -EINVAL;
|
|
pci_platform_pm = ops;
|
|
return 0;
|
|
}
|
|
|
|
static inline bool platform_pci_power_manageable(struct pci_dev *dev)
|
|
{
|
|
return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false;
|
|
}
|
|
|
|
static inline int platform_pci_set_power_state(struct pci_dev *dev,
|
|
pci_power_t t)
|
|
{
|
|
return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS;
|
|
}
|
|
|
|
static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev)
|
|
{
|
|
return pci_platform_pm ?
|
|
pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
|
|
}
|
|
|
|
static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
|
|
{
|
|
return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
|
|
}
|
|
|
|
static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
|
|
{
|
|
return pci_platform_pm ?
|
|
pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
|
|
}
|
|
|
|
static inline int platform_pci_run_wake(struct pci_dev *dev, bool enable)
|
|
{
|
|
return pci_platform_pm ?
|
|
pci_platform_pm->run_wake(dev, enable) : -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* pci_raw_set_power_state - Use PCI PM registers to set the power state of
|
|
* given PCI device
|
|
* @dev: PCI device to handle.
|
|
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
|
|
*
|
|
* RETURN VALUE:
|
|
* -EINVAL if the requested state is invalid.
|
|
* -EIO if device does not support PCI PM or its PM capabilities register has a
|
|
* wrong version, or device doesn't support the requested state.
|
|
* 0 if device already is in the requested state.
|
|
* 0 if device's power state has been successfully changed.
|
|
*/
|
|
static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
u16 pmcsr;
|
|
bool need_restore = false;
|
|
|
|
/* Check if we're already there */
|
|
if (dev->current_state == state)
|
|
return 0;
|
|
|
|
if (!dev->pm_cap)
|
|
return -EIO;
|
|
|
|
if (state < PCI_D0 || state > PCI_D3hot)
|
|
return -EINVAL;
|
|
|
|
/* Validate current state:
|
|
* Can enter D0 from any state, but if we can only go deeper
|
|
* to sleep if we're already in a low power state
|
|
*/
|
|
if (state != PCI_D0 && dev->current_state <= PCI_D3cold
|
|
&& dev->current_state > state) {
|
|
dev_err(&dev->dev, "invalid power transition "
|
|
"(from state %d to %d)\n", dev->current_state, state);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* check if this device supports the desired state */
|
|
if ((state == PCI_D1 && !dev->d1_support)
|
|
|| (state == PCI_D2 && !dev->d2_support))
|
|
return -EIO;
|
|
|
|
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
|
|
|
|
/* If we're (effectively) in D3, force entire word to 0.
|
|
* This doesn't affect PME_Status, disables PME_En, and
|
|
* sets PowerState to 0.
|
|
*/
|
|
switch (dev->current_state) {
|
|
case PCI_D0:
|
|
case PCI_D1:
|
|
case PCI_D2:
|
|
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
|
|
pmcsr |= state;
|
|
break;
|
|
case PCI_D3hot:
|
|
case PCI_D3cold:
|
|
case PCI_UNKNOWN: /* Boot-up */
|
|
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
|
|
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
|
|
need_restore = true;
|
|
/* Fall-through: force to D0 */
|
|
default:
|
|
pmcsr = 0;
|
|
break;
|
|
}
|
|
|
|
/* enter specified state */
|
|
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
|
|
|
|
/* Mandatory power management transition delays */
|
|
/* see PCI PM 1.1 5.6.1 table 18 */
|
|
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
|
|
pci_dev_d3_sleep(dev);
|
|
else if (state == PCI_D2 || dev->current_state == PCI_D2)
|
|
udelay(PCI_PM_D2_DELAY);
|
|
|
|
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
|
|
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
|
|
if (dev->current_state != state && printk_ratelimit())
|
|
dev_info(&dev->dev, "Refused to change power state, "
|
|
"currently in D%d\n", dev->current_state);
|
|
|
|
/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
|
|
* INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
|
|
* from D3hot to D0 _may_ perform an internal reset, thereby
|
|
* going to "D0 Uninitialized" rather than "D0 Initialized".
|
|
* For example, at least some versions of the 3c905B and the
|
|
* 3c556B exhibit this behaviour.
|
|
*
|
|
* At least some laptop BIOSen (e.g. the Thinkpad T21) leave
|
|
* devices in a D3hot state at boot. Consequently, we need to
|
|
* restore at least the BARs so that the device will be
|
|
* accessible to its driver.
|
|
*/
|
|
if (need_restore)
|
|
pci_restore_bars(dev);
|
|
|
|
if (dev->bus->self)
|
|
pcie_aspm_pm_state_change(dev->bus->self);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_update_current_state - Read PCI power state of given device from its
|
|
* PCI PM registers and cache it
|
|
* @dev: PCI device to handle.
|
|
* @state: State to cache in case the device doesn't have the PM capability
|
|
*/
|
|
void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
if (dev->pm_cap) {
|
|
u16 pmcsr;
|
|
|
|
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
|
|
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
|
|
} else {
|
|
dev->current_state = state;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* pci_platform_power_transition - Use platform to change device power state
|
|
* @dev: PCI device to handle.
|
|
* @state: State to put the device into.
|
|
*/
|
|
static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
int error;
|
|
|
|
if (platform_pci_power_manageable(dev)) {
|
|
error = platform_pci_set_power_state(dev, state);
|
|
if (!error)
|
|
pci_update_current_state(dev, state);
|
|
} else {
|
|
error = -ENODEV;
|
|
/* Fall back to PCI_D0 if native PM is not supported */
|
|
if (!dev->pm_cap)
|
|
dev->current_state = PCI_D0;
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* __pci_start_power_transition - Start power transition of a PCI device
|
|
* @dev: PCI device to handle.
|
|
* @state: State to put the device into.
|
|
*/
|
|
static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
if (state == PCI_D0)
|
|
pci_platform_power_transition(dev, PCI_D0);
|
|
}
|
|
|
|
/**
|
|
* __pci_complete_power_transition - Complete power transition of a PCI device
|
|
* @dev: PCI device to handle.
|
|
* @state: State to put the device into.
|
|
*
|
|
* This function should not be called directly by device drivers.
|
|
*/
|
|
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
return state >= PCI_D0 ?
|
|
pci_platform_power_transition(dev, state) : -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
|
|
|
|
/**
|
|
* pci_set_power_state - Set the power state of a PCI device
|
|
* @dev: PCI device to handle.
|
|
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
|
|
*
|
|
* Transition a device to a new power state, using the platform firmware and/or
|
|
* the device's PCI PM registers.
|
|
*
|
|
* RETURN VALUE:
|
|
* -EINVAL if the requested state is invalid.
|
|
* -EIO if device does not support PCI PM or its PM capabilities register has a
|
|
* wrong version, or device doesn't support the requested state.
|
|
* 0 if device already is in the requested state.
|
|
* 0 if device's power state has been successfully changed.
|
|
*/
|
|
int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
int error;
|
|
|
|
/* bound the state we're entering */
|
|
if (state > PCI_D3hot)
|
|
state = PCI_D3hot;
|
|
else if (state < PCI_D0)
|
|
state = PCI_D0;
|
|
else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
|
|
/*
|
|
* If the device or the parent bridge do not support PCI PM,
|
|
* ignore the request if we're doing anything other than putting
|
|
* it into D0 (which would only happen on boot).
|
|
*/
|
|
return 0;
|
|
|
|
__pci_start_power_transition(dev, state);
|
|
|
|
/* This device is quirked not to be put into D3, so
|
|
don't put it in D3 */
|
|
if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
|
|
return 0;
|
|
|
|
error = pci_raw_set_power_state(dev, state);
|
|
|
|
if (!__pci_complete_power_transition(dev, state))
|
|
error = 0;
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* pci_choose_state - Choose the power state of a PCI device
|
|
* @dev: PCI device to be suspended
|
|
* @state: target sleep state for the whole system. This is the value
|
|
* that is passed to suspend() function.
|
|
*
|
|
* Returns PCI power state suitable for given device and given system
|
|
* message.
|
|
*/
|
|
|
|
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
|
|
{
|
|
pci_power_t ret;
|
|
|
|
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
|
|
return PCI_D0;
|
|
|
|
ret = platform_pci_choose_state(dev);
|
|
if (ret != PCI_POWER_ERROR)
|
|
return ret;
|
|
|
|
switch (state.event) {
|
|
case PM_EVENT_ON:
|
|
return PCI_D0;
|
|
case PM_EVENT_FREEZE:
|
|
case PM_EVENT_PRETHAW:
|
|
/* REVISIT both freeze and pre-thaw "should" use D0 */
|
|
case PM_EVENT_SUSPEND:
|
|
case PM_EVENT_HIBERNATE:
|
|
return PCI_D3hot;
|
|
default:
|
|
dev_info(&dev->dev, "unrecognized suspend event %d\n",
|
|
state.event);
|
|
BUG();
|
|
}
|
|
return PCI_D0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_choose_state);
|
|
|
|
#define PCI_EXP_SAVE_REGS 7
|
|
|
|
#define pcie_cap_has_devctl(type, flags) 1
|
|
#define pcie_cap_has_lnkctl(type, flags) \
|
|
((flags & PCI_EXP_FLAGS_VERS) > 1 || \
|
|
(type == PCI_EXP_TYPE_ROOT_PORT || \
|
|
type == PCI_EXP_TYPE_ENDPOINT || \
|
|
type == PCI_EXP_TYPE_LEG_END))
|
|
#define pcie_cap_has_sltctl(type, flags) \
|
|
((flags & PCI_EXP_FLAGS_VERS) > 1 || \
|
|
((type == PCI_EXP_TYPE_ROOT_PORT) || \
|
|
(type == PCI_EXP_TYPE_DOWNSTREAM && \
|
|
(flags & PCI_EXP_FLAGS_SLOT))))
|
|
#define pcie_cap_has_rtctl(type, flags) \
|
|
((flags & PCI_EXP_FLAGS_VERS) > 1 || \
|
|
(type == PCI_EXP_TYPE_ROOT_PORT || \
|
|
type == PCI_EXP_TYPE_RC_EC))
|
|
#define pcie_cap_has_devctl2(type, flags) \
|
|
((flags & PCI_EXP_FLAGS_VERS) > 1)
|
|
#define pcie_cap_has_lnkctl2(type, flags) \
|
|
((flags & PCI_EXP_FLAGS_VERS) > 1)
|
|
#define pcie_cap_has_sltctl2(type, flags) \
|
|
((flags & PCI_EXP_FLAGS_VERS) > 1)
|
|
|
|
static int pci_save_pcie_state(struct pci_dev *dev)
|
|
{
|
|
int pos, i = 0;
|
|
struct pci_cap_saved_state *save_state;
|
|
u16 *cap;
|
|
u16 flags;
|
|
|
|
pos = pci_pcie_cap(dev);
|
|
if (!pos)
|
|
return 0;
|
|
|
|
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
|
|
if (!save_state) {
|
|
dev_err(&dev->dev, "buffer not found in %s\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
cap = (u16 *)&save_state->data[0];
|
|
|
|
pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
|
|
|
|
if (pcie_cap_has_devctl(dev->pcie_type, flags))
|
|
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
|
|
if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
|
|
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
|
|
if (pcie_cap_has_sltctl(dev->pcie_type, flags))
|
|
pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
|
|
if (pcie_cap_has_rtctl(dev->pcie_type, flags))
|
|
pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
|
|
if (pcie_cap_has_devctl2(dev->pcie_type, flags))
|
|
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
|
|
if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
|
|
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
|
|
if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
|
|
pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pci_restore_pcie_state(struct pci_dev *dev)
|
|
{
|
|
int i = 0, pos;
|
|
struct pci_cap_saved_state *save_state;
|
|
u16 *cap;
|
|
u16 flags;
|
|
|
|
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (!save_state || pos <= 0)
|
|
return;
|
|
cap = (u16 *)&save_state->data[0];
|
|
|
|
pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
|
|
|
|
if (pcie_cap_has_devctl(dev->pcie_type, flags))
|
|
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
|
|
if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
|
|
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
|
|
if (pcie_cap_has_sltctl(dev->pcie_type, flags))
|
|
pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
|
|
if (pcie_cap_has_rtctl(dev->pcie_type, flags))
|
|
pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
|
|
if (pcie_cap_has_devctl2(dev->pcie_type, flags))
|
|
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
|
|
if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
|
|
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
|
|
if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
|
|
pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
|
|
}
|
|
|
|
|
|
static int pci_save_pcix_state(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
struct pci_cap_saved_state *save_state;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
|
|
if (pos <= 0)
|
|
return 0;
|
|
|
|
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
|
|
if (!save_state) {
|
|
dev_err(&dev->dev, "buffer not found in %s\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pci_read_config_word(dev, pos + PCI_X_CMD, (u16 *)save_state->data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pci_restore_pcix_state(struct pci_dev *dev)
|
|
{
|
|
int i = 0, pos;
|
|
struct pci_cap_saved_state *save_state;
|
|
u16 *cap;
|
|
|
|
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
|
|
if (!save_state || pos <= 0)
|
|
return;
|
|
cap = (u16 *)&save_state->data[0];
|
|
|
|
pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
|
|
}
|
|
|
|
|
|
/**
|
|
* pci_save_state - save the PCI configuration space of a device before suspending
|
|
* @dev: - PCI device that we're dealing with
|
|
*/
|
|
int
|
|
pci_save_state(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
/* XXX: 100% dword access ok here? */
|
|
for (i = 0; i < 16; i++)
|
|
pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]);
|
|
dev->state_saved = true;
|
|
if ((i = pci_save_pcie_state(dev)) != 0)
|
|
return i;
|
|
if ((i = pci_save_pcix_state(dev)) != 0)
|
|
return i;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_restore_state - Restore the saved state of a PCI device
|
|
* @dev: - PCI device that we're dealing with
|
|
*/
|
|
int
|
|
pci_restore_state(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
if (!dev->state_saved)
|
|
return 0;
|
|
|
|
/* PCI Express register must be restored first */
|
|
pci_restore_pcie_state(dev);
|
|
|
|
/*
|
|
* The Base Address register should be programmed before the command
|
|
* register(s)
|
|
*/
|
|
for (i = 15; i >= 0; i--) {
|
|
pci_read_config_dword(dev, i * 4, &val);
|
|
if (val != dev->saved_config_space[i]) {
|
|
dev_printk(KERN_DEBUG, &dev->dev, "restoring config "
|
|
"space at offset %#x (was %#x, writing %#x)\n",
|
|
i, val, (int)dev->saved_config_space[i]);
|
|
pci_write_config_dword(dev,i * 4,
|
|
dev->saved_config_space[i]);
|
|
}
|
|
}
|
|
pci_restore_pcix_state(dev);
|
|
pci_restore_msi_state(dev);
|
|
pci_restore_iov_state(dev);
|
|
|
|
dev->state_saved = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int do_pci_enable_device(struct pci_dev *dev, int bars)
|
|
{
|
|
int err;
|
|
|
|
err = pci_set_power_state(dev, PCI_D0);
|
|
if (err < 0 && err != -EIO)
|
|
return err;
|
|
err = pcibios_enable_device(dev, bars);
|
|
if (err < 0)
|
|
return err;
|
|
pci_fixup_device(pci_fixup_enable, dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_reenable_device - Resume abandoned device
|
|
* @dev: PCI device to be resumed
|
|
*
|
|
* Note this function is a backend of pci_default_resume and is not supposed
|
|
* to be called by normal code, write proper resume handler and use it instead.
|
|
*/
|
|
int pci_reenable_device(struct pci_dev *dev)
|
|
{
|
|
if (pci_is_enabled(dev))
|
|
return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
|
|
return 0;
|
|
}
|
|
|
|
static int __pci_enable_device_flags(struct pci_dev *dev,
|
|
resource_size_t flags)
|
|
{
|
|
int err;
|
|
int i, bars = 0;
|
|
|
|
if (atomic_add_return(1, &dev->enable_cnt) > 1)
|
|
return 0; /* already enabled */
|
|
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
|
|
if (dev->resource[i].flags & flags)
|
|
bars |= (1 << i);
|
|
|
|
err = do_pci_enable_device(dev, bars);
|
|
if (err < 0)
|
|
atomic_dec(&dev->enable_cnt);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* pci_enable_device_io - Initialize a device for use with IO space
|
|
* @dev: PCI device to be initialized
|
|
*
|
|
* Initialize device before it's used by a driver. Ask low-level code
|
|
* to enable I/O resources. Wake up the device if it was suspended.
|
|
* Beware, this function can fail.
|
|
*/
|
|
int pci_enable_device_io(struct pci_dev *dev)
|
|
{
|
|
return __pci_enable_device_flags(dev, IORESOURCE_IO);
|
|
}
|
|
|
|
/**
|
|
* pci_enable_device_mem - Initialize a device for use with Memory space
|
|
* @dev: PCI device to be initialized
|
|
*
|
|
* Initialize device before it's used by a driver. Ask low-level code
|
|
* to enable Memory resources. Wake up the device if it was suspended.
|
|
* Beware, this function can fail.
|
|
*/
|
|
int pci_enable_device_mem(struct pci_dev *dev)
|
|
{
|
|
return __pci_enable_device_flags(dev, IORESOURCE_MEM);
|
|
}
|
|
|
|
/**
|
|
* pci_enable_device - Initialize device before it's used by a driver.
|
|
* @dev: PCI device to be initialized
|
|
*
|
|
* Initialize device before it's used by a driver. Ask low-level code
|
|
* to enable I/O and memory. Wake up the device if it was suspended.
|
|
* Beware, this function can fail.
|
|
*
|
|
* Note we don't actually enable the device many times if we call
|
|
* this function repeatedly (we just increment the count).
|
|
*/
|
|
int pci_enable_device(struct pci_dev *dev)
|
|
{
|
|
return __pci_enable_device_flags(dev, IORESOURCE_MEM | IORESOURCE_IO);
|
|
}
|
|
|
|
/*
|
|
* Managed PCI resources. This manages device on/off, intx/msi/msix
|
|
* on/off and BAR regions. pci_dev itself records msi/msix status, so
|
|
* there's no need to track it separately. pci_devres is initialized
|
|
* when a device is enabled using managed PCI device enable interface.
|
|
*/
|
|
struct pci_devres {
|
|
unsigned int enabled:1;
|
|
unsigned int pinned:1;
|
|
unsigned int orig_intx:1;
|
|
unsigned int restore_intx:1;
|
|
u32 region_mask;
|
|
};
|
|
|
|
static void pcim_release(struct device *gendev, void *res)
|
|
{
|
|
struct pci_dev *dev = container_of(gendev, struct pci_dev, dev);
|
|
struct pci_devres *this = res;
|
|
int i;
|
|
|
|
if (dev->msi_enabled)
|
|
pci_disable_msi(dev);
|
|
if (dev->msix_enabled)
|
|
pci_disable_msix(dev);
|
|
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
|
|
if (this->region_mask & (1 << i))
|
|
pci_release_region(dev, i);
|
|
|
|
if (this->restore_intx)
|
|
pci_intx(dev, this->orig_intx);
|
|
|
|
if (this->enabled && !this->pinned)
|
|
pci_disable_device(dev);
|
|
}
|
|
|
|
static struct pci_devres * get_pci_dr(struct pci_dev *pdev)
|
|
{
|
|
struct pci_devres *dr, *new_dr;
|
|
|
|
dr = devres_find(&pdev->dev, pcim_release, NULL, NULL);
|
|
if (dr)
|
|
return dr;
|
|
|
|
new_dr = devres_alloc(pcim_release, sizeof(*new_dr), GFP_KERNEL);
|
|
if (!new_dr)
|
|
return NULL;
|
|
return devres_get(&pdev->dev, new_dr, NULL, NULL);
|
|
}
|
|
|
|
static struct pci_devres * find_pci_dr(struct pci_dev *pdev)
|
|
{
|
|
if (pci_is_managed(pdev))
|
|
return devres_find(&pdev->dev, pcim_release, NULL, NULL);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* pcim_enable_device - Managed pci_enable_device()
|
|
* @pdev: PCI device to be initialized
|
|
*
|
|
* Managed pci_enable_device().
|
|
*/
|
|
int pcim_enable_device(struct pci_dev *pdev)
|
|
{
|
|
struct pci_devres *dr;
|
|
int rc;
|
|
|
|
dr = get_pci_dr(pdev);
|
|
if (unlikely(!dr))
|
|
return -ENOMEM;
|
|
if (dr->enabled)
|
|
return 0;
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (!rc) {
|
|
pdev->is_managed = 1;
|
|
dr->enabled = 1;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* pcim_pin_device - Pin managed PCI device
|
|
* @pdev: PCI device to pin
|
|
*
|
|
* Pin managed PCI device @pdev. Pinned device won't be disabled on
|
|
* driver detach. @pdev must have been enabled with
|
|
* pcim_enable_device().
|
|
*/
|
|
void pcim_pin_device(struct pci_dev *pdev)
|
|
{
|
|
struct pci_devres *dr;
|
|
|
|
dr = find_pci_dr(pdev);
|
|
WARN_ON(!dr || !dr->enabled);
|
|
if (dr)
|
|
dr->pinned = 1;
|
|
}
|
|
|
|
/**
|
|
* pcibios_disable_device - disable arch specific PCI resources for device dev
|
|
* @dev: the PCI device to disable
|
|
*
|
|
* Disables architecture specific PCI resources for the device. This
|
|
* is the default implementation. Architecture implementations can
|
|
* override this.
|
|
*/
|
|
void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
|
|
|
|
static void do_pci_disable_device(struct pci_dev *dev)
|
|
{
|
|
u16 pci_command;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
|
|
if (pci_command & PCI_COMMAND_MASTER) {
|
|
pci_command &= ~PCI_COMMAND_MASTER;
|
|
pci_write_config_word(dev, PCI_COMMAND, pci_command);
|
|
}
|
|
|
|
pcibios_disable_device(dev);
|
|
}
|
|
|
|
/**
|
|
* pci_disable_enabled_device - Disable device without updating enable_cnt
|
|
* @dev: PCI device to disable
|
|
*
|
|
* NOTE: This function is a backend of PCI power management routines and is
|
|
* not supposed to be called drivers.
|
|
*/
|
|
void pci_disable_enabled_device(struct pci_dev *dev)
|
|
{
|
|
if (pci_is_enabled(dev))
|
|
do_pci_disable_device(dev);
|
|
}
|
|
|
|
/**
|
|
* pci_disable_device - Disable PCI device after use
|
|
* @dev: PCI device to be disabled
|
|
*
|
|
* Signal to the system that the PCI device is not in use by the system
|
|
* anymore. This only involves disabling PCI bus-mastering, if active.
|
|
*
|
|
* Note we don't actually disable the device until all callers of
|
|
* pci_enable_device() have called pci_disable_device().
|
|
*/
|
|
void
|
|
pci_disable_device(struct pci_dev *dev)
|
|
{
|
|
struct pci_devres *dr;
|
|
|
|
dr = find_pci_dr(dev);
|
|
if (dr)
|
|
dr->enabled = 0;
|
|
|
|
if (atomic_sub_return(1, &dev->enable_cnt) != 0)
|
|
return;
|
|
|
|
do_pci_disable_device(dev);
|
|
|
|
dev->is_busmaster = 0;
|
|
}
|
|
|
|
/**
|
|
* pcibios_set_pcie_reset_state - set reset state for device dev
|
|
* @dev: the PCIe device reset
|
|
* @state: Reset state to enter into
|
|
*
|
|
*
|
|
* Sets the PCIe reset state for the device. This is the default
|
|
* implementation. Architecture implementations can override this.
|
|
*/
|
|
int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
|
|
enum pcie_reset_state state)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* pci_set_pcie_reset_state - set reset state for device dev
|
|
* @dev: the PCIe device reset
|
|
* @state: Reset state to enter into
|
|
*
|
|
*
|
|
* Sets the PCI reset state for the device.
|
|
*/
|
|
int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
|
|
{
|
|
return pcibios_set_pcie_reset_state(dev, state);
|
|
}
|
|
|
|
/**
|
|
* pci_check_pme_status - Check if given device has generated PME.
|
|
* @dev: Device to check.
|
|
*
|
|
* Check the PME status of the device and if set, clear it and clear PME enable
|
|
* (if set). Return 'true' if PME status and PME enable were both set or
|
|
* 'false' otherwise.
|
|
*/
|
|
bool pci_check_pme_status(struct pci_dev *dev)
|
|
{
|
|
int pmcsr_pos;
|
|
u16 pmcsr;
|
|
bool ret = false;
|
|
|
|
if (!dev->pm_cap)
|
|
return false;
|
|
|
|
pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
|
|
pci_read_config_word(dev, pmcsr_pos, &pmcsr);
|
|
if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
|
|
return false;
|
|
|
|
/* Clear PME status. */
|
|
pmcsr |= PCI_PM_CTRL_PME_STATUS;
|
|
if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
|
|
/* Disable PME to avoid interrupt flood. */
|
|
pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
|
|
ret = true;
|
|
}
|
|
|
|
pci_write_config_word(dev, pmcsr_pos, pmcsr);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Time to wait before the system can be put into a sleep state after reporting
|
|
* a wakeup event signaled by a PCI device.
|
|
*/
|
|
#define PCI_WAKEUP_COOLDOWN 100
|
|
|
|
/**
|
|
* pci_wakeup_event - Report a wakeup event related to a given PCI device.
|
|
* @dev: Device to report the wakeup event for.
|
|
*/
|
|
void pci_wakeup_event(struct pci_dev *dev)
|
|
{
|
|
if (device_may_wakeup(&dev->dev))
|
|
pm_wakeup_event(&dev->dev, PCI_WAKEUP_COOLDOWN);
|
|
}
|
|
|
|
/**
|
|
* pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set.
|
|
* @dev: Device to handle.
|
|
* @ign: Ignored.
|
|
*
|
|
* Check if @dev has generated PME and queue a resume request for it in that
|
|
* case.
|
|
*/
|
|
static int pci_pme_wakeup(struct pci_dev *dev, void *ign)
|
|
{
|
|
if (pci_check_pme_status(dev)) {
|
|
pm_request_resume(&dev->dev);
|
|
pci_wakeup_event(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_pme_wakeup_bus - Walk given bus and wake up devices on it, if necessary.
|
|
* @bus: Top bus of the subtree to walk.
|
|
*/
|
|
void pci_pme_wakeup_bus(struct pci_bus *bus)
|
|
{
|
|
if (bus)
|
|
pci_walk_bus(bus, pci_pme_wakeup, NULL);
|
|
}
|
|
|
|
/**
|
|
* pci_pme_capable - check the capability of PCI device to generate PME#
|
|
* @dev: PCI device to handle.
|
|
* @state: PCI state from which device will issue PME#.
|
|
*/
|
|
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
if (!dev->pm_cap)
|
|
return false;
|
|
|
|
return !!(dev->pme_support & (1 << state));
|
|
}
|
|
|
|
/**
|
|
* pci_pme_active - enable or disable PCI device's PME# function
|
|
* @dev: PCI device to handle.
|
|
* @enable: 'true' to enable PME# generation; 'false' to disable it.
|
|
*
|
|
* The caller must verify that the device is capable of generating PME# before
|
|
* calling this function with @enable equal to 'true'.
|
|
*/
|
|
void pci_pme_active(struct pci_dev *dev, bool enable)
|
|
{
|
|
u16 pmcsr;
|
|
|
|
if (!dev->pm_cap)
|
|
return;
|
|
|
|
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
|
|
/* Clear PME_Status by writing 1 to it and enable PME# */
|
|
pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
|
|
if (!enable)
|
|
pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
|
|
|
|
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "PME# %s\n",
|
|
enable ? "enabled" : "disabled");
|
|
}
|
|
|
|
/**
|
|
* __pci_enable_wake - enable PCI device as wakeup event source
|
|
* @dev: PCI device affected
|
|
* @state: PCI state from which device will issue wakeup events
|
|
* @runtime: True if the events are to be generated at run time
|
|
* @enable: True to enable event generation; false to disable
|
|
*
|
|
* This enables the device as a wakeup event source, or disables it.
|
|
* When such events involves platform-specific hooks, those hooks are
|
|
* called automatically by this routine.
|
|
*
|
|
* Devices with legacy power management (no standard PCI PM capabilities)
|
|
* always require such platform hooks.
|
|
*
|
|
* RETURN VALUE:
|
|
* 0 is returned on success
|
|
* -EINVAL is returned if device is not supposed to wake up the system
|
|
* Error code depending on the platform is returned if both the platform and
|
|
* the native mechanism fail to enable the generation of wake-up events
|
|
*/
|
|
int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
|
|
bool runtime, bool enable)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (enable && !runtime && !device_may_wakeup(&dev->dev))
|
|
return -EINVAL;
|
|
|
|
/* Don't do the same thing twice in a row for one device. */
|
|
if (!!enable == !!dev->wakeup_prepared)
|
|
return 0;
|
|
|
|
/*
|
|
* According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
|
|
* Anderson we should be doing PME# wake enable followed by ACPI wake
|
|
* enable. To disable wake-up we call the platform first, for symmetry.
|
|
*/
|
|
|
|
if (enable) {
|
|
int error;
|
|
|
|
if (pci_pme_capable(dev, state))
|
|
pci_pme_active(dev, true);
|
|
else
|
|
ret = 1;
|
|
error = runtime ? platform_pci_run_wake(dev, true) :
|
|
platform_pci_sleep_wake(dev, true);
|
|
if (ret)
|
|
ret = error;
|
|
if (!ret)
|
|
dev->wakeup_prepared = true;
|
|
} else {
|
|
if (runtime)
|
|
platform_pci_run_wake(dev, false);
|
|
else
|
|
platform_pci_sleep_wake(dev, false);
|
|
pci_pme_active(dev, false);
|
|
dev->wakeup_prepared = false;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(__pci_enable_wake);
|
|
|
|
/**
|
|
* pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
|
|
* @dev: PCI device to prepare
|
|
* @enable: True to enable wake-up event generation; false to disable
|
|
*
|
|
* Many drivers want the device to wake up the system from D3_hot or D3_cold
|
|
* and this function allows them to set that up cleanly - pci_enable_wake()
|
|
* should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
|
|
* ordering constraints.
|
|
*
|
|
* This function only returns error code if the device is not capable of
|
|
* generating PME# from both D3_hot and D3_cold, and the platform is unable to
|
|
* enable wake-up power for it.
|
|
*/
|
|
int pci_wake_from_d3(struct pci_dev *dev, bool enable)
|
|
{
|
|
return pci_pme_capable(dev, PCI_D3cold) ?
|
|
pci_enable_wake(dev, PCI_D3cold, enable) :
|
|
pci_enable_wake(dev, PCI_D3hot, enable);
|
|
}
|
|
|
|
/**
|
|
* pci_target_state - find an appropriate low power state for a given PCI dev
|
|
* @dev: PCI device
|
|
*
|
|
* Use underlying platform code to find a supported low power state for @dev.
|
|
* If the platform can't manage @dev, return the deepest state from which it
|
|
* can generate wake events, based on any available PME info.
|
|
*/
|
|
pci_power_t pci_target_state(struct pci_dev *dev)
|
|
{
|
|
pci_power_t target_state = PCI_D3hot;
|
|
|
|
if (platform_pci_power_manageable(dev)) {
|
|
/*
|
|
* Call the platform to choose the target state of the device
|
|
* and enable wake-up from this state if supported.
|
|
*/
|
|
pci_power_t state = platform_pci_choose_state(dev);
|
|
|
|
switch (state) {
|
|
case PCI_POWER_ERROR:
|
|
case PCI_UNKNOWN:
|
|
break;
|
|
case PCI_D1:
|
|
case PCI_D2:
|
|
if (pci_no_d1d2(dev))
|
|
break;
|
|
default:
|
|
target_state = state;
|
|
}
|
|
} else if (!dev->pm_cap) {
|
|
target_state = PCI_D0;
|
|
} else if (device_may_wakeup(&dev->dev)) {
|
|
/*
|
|
* Find the deepest state from which the device can generate
|
|
* wake-up events, make it the target state and enable device
|
|
* to generate PME#.
|
|
*/
|
|
if (dev->pme_support) {
|
|
while (target_state
|
|
&& !(dev->pme_support & (1 << target_state)))
|
|
target_state--;
|
|
}
|
|
}
|
|
|
|
return target_state;
|
|
}
|
|
|
|
/**
|
|
* pci_prepare_to_sleep - prepare PCI device for system-wide transition into a sleep state
|
|
* @dev: Device to handle.
|
|
*
|
|
* Choose the power state appropriate for the device depending on whether
|
|
* it can wake up the system and/or is power manageable by the platform
|
|
* (PCI_D3hot is the default) and put the device into that state.
|
|
*/
|
|
int pci_prepare_to_sleep(struct pci_dev *dev)
|
|
{
|
|
pci_power_t target_state = pci_target_state(dev);
|
|
int error;
|
|
|
|
if (target_state == PCI_POWER_ERROR)
|
|
return -EIO;
|
|
|
|
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
|
|
|
|
error = pci_set_power_state(dev, target_state);
|
|
|
|
if (error)
|
|
pci_enable_wake(dev, target_state, false);
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* pci_back_from_sleep - turn PCI device on during system-wide transition into working state
|
|
* @dev: Device to handle.
|
|
*
|
|
* Disable device's system wake-up capability and put it into D0.
|
|
*/
|
|
int pci_back_from_sleep(struct pci_dev *dev)
|
|
{
|
|
pci_enable_wake(dev, PCI_D0, false);
|
|
return pci_set_power_state(dev, PCI_D0);
|
|
}
|
|
|
|
/**
|
|
* pci_finish_runtime_suspend - Carry out PCI-specific part of runtime suspend.
|
|
* @dev: PCI device being suspended.
|
|
*
|
|
* Prepare @dev to generate wake-up events at run time and put it into a low
|
|
* power state.
|
|
*/
|
|
int pci_finish_runtime_suspend(struct pci_dev *dev)
|
|
{
|
|
pci_power_t target_state = pci_target_state(dev);
|
|
int error;
|
|
|
|
if (target_state == PCI_POWER_ERROR)
|
|
return -EIO;
|
|
|
|
__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
|
|
|
|
error = pci_set_power_state(dev, target_state);
|
|
|
|
if (error)
|
|
__pci_enable_wake(dev, target_state, true, false);
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* pci_dev_run_wake - Check if device can generate run-time wake-up events.
|
|
* @dev: Device to check.
|
|
*
|
|
* Return true if the device itself is cabable of generating wake-up events
|
|
* (through the platform or using the native PCIe PME) or if the device supports
|
|
* PME and one of its upstream bridges can generate wake-up events.
|
|
*/
|
|
bool pci_dev_run_wake(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *bus = dev->bus;
|
|
|
|
if (device_run_wake(&dev->dev))
|
|
return true;
|
|
|
|
if (!dev->pme_support)
|
|
return false;
|
|
|
|
while (bus->parent) {
|
|
struct pci_dev *bridge = bus->self;
|
|
|
|
if (device_run_wake(&bridge->dev))
|
|
return true;
|
|
|
|
bus = bus->parent;
|
|
}
|
|
|
|
/* We have reached the root bus. */
|
|
if (bus->bridge)
|
|
return device_run_wake(bus->bridge);
|
|
|
|
return false;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_dev_run_wake);
|
|
|
|
/**
|
|
* pci_pm_init - Initialize PM functions of given PCI device
|
|
* @dev: PCI device to handle.
|
|
*/
|
|
void pci_pm_init(struct pci_dev *dev)
|
|
{
|
|
int pm;
|
|
u16 pmc;
|
|
|
|
pm_runtime_forbid(&dev->dev);
|
|
device_enable_async_suspend(&dev->dev);
|
|
dev->wakeup_prepared = false;
|
|
|
|
dev->pm_cap = 0;
|
|
|
|
/* find PCI PM capability in list */
|
|
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
|
|
if (!pm)
|
|
return;
|
|
/* Check device's ability to generate PME# */
|
|
pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
|
|
|
|
if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
|
|
dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
|
|
pmc & PCI_PM_CAP_VER_MASK);
|
|
return;
|
|
}
|
|
|
|
dev->pm_cap = pm;
|
|
dev->d3_delay = PCI_PM_D3_WAIT;
|
|
|
|
dev->d1_support = false;
|
|
dev->d2_support = false;
|
|
if (!pci_no_d1d2(dev)) {
|
|
if (pmc & PCI_PM_CAP_D1)
|
|
dev->d1_support = true;
|
|
if (pmc & PCI_PM_CAP_D2)
|
|
dev->d2_support = true;
|
|
|
|
if (dev->d1_support || dev->d2_support)
|
|
dev_printk(KERN_DEBUG, &dev->dev, "supports%s%s\n",
|
|
dev->d1_support ? " D1" : "",
|
|
dev->d2_support ? " D2" : "");
|
|
}
|
|
|
|
pmc &= PCI_PM_CAP_PME_MASK;
|
|
if (pmc) {
|
|
dev_printk(KERN_DEBUG, &dev->dev,
|
|
"PME# supported from%s%s%s%s%s\n",
|
|
(pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
|
|
(pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
|
|
(pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
|
|
(pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
|
|
(pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
|
|
dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
|
|
/*
|
|
* Make device's PM flags reflect the wake-up capability, but
|
|
* let the user space enable it to wake up the system as needed.
|
|
*/
|
|
device_set_wakeup_capable(&dev->dev, true);
|
|
/* Disable the PME# generation functionality */
|
|
pci_pme_active(dev, false);
|
|
} else {
|
|
dev->pme_support = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* platform_pci_wakeup_init - init platform wakeup if present
|
|
* @dev: PCI device
|
|
*
|
|
* Some devices don't have PCI PM caps but can still generate wakeup
|
|
* events through platform methods (like ACPI events). If @dev supports
|
|
* platform wakeup events, set the device flag to indicate as much. This
|
|
* may be redundant if the device also supports PCI PM caps, but double
|
|
* initialization should be safe in that case.
|
|
*/
|
|
void platform_pci_wakeup_init(struct pci_dev *dev)
|
|
{
|
|
if (!platform_pci_can_wakeup(dev))
|
|
return;
|
|
|
|
device_set_wakeup_capable(&dev->dev, true);
|
|
platform_pci_sleep_wake(dev, false);
|
|
}
|
|
|
|
/**
|
|
* pci_add_save_buffer - allocate buffer for saving given capability registers
|
|
* @dev: the PCI device
|
|
* @cap: the capability to allocate the buffer for
|
|
* @size: requested size of the buffer
|
|
*/
|
|
static int pci_add_cap_save_buffer(
|
|
struct pci_dev *dev, char cap, unsigned int size)
|
|
{
|
|
int pos;
|
|
struct pci_cap_saved_state *save_state;
|
|
|
|
pos = pci_find_capability(dev, cap);
|
|
if (pos <= 0)
|
|
return 0;
|
|
|
|
save_state = kzalloc(sizeof(*save_state) + size, GFP_KERNEL);
|
|
if (!save_state)
|
|
return -ENOMEM;
|
|
|
|
save_state->cap_nr = cap;
|
|
pci_add_saved_cap(dev, save_state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_allocate_cap_save_buffers - allocate buffers for saving capabilities
|
|
* @dev: the PCI device
|
|
*/
|
|
void pci_allocate_cap_save_buffers(struct pci_dev *dev)
|
|
{
|
|
int error;
|
|
|
|
error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP,
|
|
PCI_EXP_SAVE_REGS * sizeof(u16));
|
|
if (error)
|
|
dev_err(&dev->dev,
|
|
"unable to preallocate PCI Express save buffer\n");
|
|
|
|
error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_PCIX, sizeof(u16));
|
|
if (error)
|
|
dev_err(&dev->dev,
|
|
"unable to preallocate PCI-X save buffer\n");
|
|
}
|
|
|
|
/**
|
|
* pci_enable_ari - enable ARI forwarding if hardware support it
|
|
* @dev: the PCI device
|
|
*/
|
|
void pci_enable_ari(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
u32 cap;
|
|
u16 ctrl;
|
|
struct pci_dev *bridge;
|
|
|
|
if (!pci_is_pcie(dev) || dev->devfn)
|
|
return;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
|
|
if (!pos)
|
|
return;
|
|
|
|
bridge = dev->bus->self;
|
|
if (!bridge || !pci_is_pcie(bridge))
|
|
return;
|
|
|
|
pos = pci_pcie_cap(bridge);
|
|
if (!pos)
|
|
return;
|
|
|
|
pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
|
|
if (!(cap & PCI_EXP_DEVCAP2_ARI))
|
|
return;
|
|
|
|
pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl);
|
|
ctrl |= PCI_EXP_DEVCTL2_ARI;
|
|
pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl);
|
|
|
|
bridge->ari_enabled = 1;
|
|
}
|
|
|
|
static int pci_acs_enable;
|
|
|
|
/**
|
|
* pci_request_acs - ask for ACS to be enabled if supported
|
|
*/
|
|
void pci_request_acs(void)
|
|
{
|
|
pci_acs_enable = 1;
|
|
}
|
|
|
|
/**
|
|
* pci_enable_acs - enable ACS if hardware support it
|
|
* @dev: the PCI device
|
|
*/
|
|
void pci_enable_acs(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
u16 cap;
|
|
u16 ctrl;
|
|
|
|
if (!pci_acs_enable)
|
|
return;
|
|
|
|
if (!pci_is_pcie(dev))
|
|
return;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
|
|
if (!pos)
|
|
return;
|
|
|
|
pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
|
|
pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
|
|
|
|
/* Source Validation */
|
|
ctrl |= (cap & PCI_ACS_SV);
|
|
|
|
/* P2P Request Redirect */
|
|
ctrl |= (cap & PCI_ACS_RR);
|
|
|
|
/* P2P Completion Redirect */
|
|
ctrl |= (cap & PCI_ACS_CR);
|
|
|
|
/* Upstream Forwarding */
|
|
ctrl |= (cap & PCI_ACS_UF);
|
|
|
|
pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
|
|
}
|
|
|
|
/**
|
|
* pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
|
|
* @dev: the PCI device
|
|
* @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
|
|
*
|
|
* Perform INTx swizzling for a device behind one level of bridge. This is
|
|
* required by section 9.1 of the PCI-to-PCI bridge specification for devices
|
|
* behind bridges on add-in cards. For devices with ARI enabled, the slot
|
|
* number is always 0 (see the Implementation Note in section 2.2.8.1 of
|
|
* the PCI Express Base Specification, Revision 2.1)
|
|
*/
|
|
u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
|
|
{
|
|
int slot;
|
|
|
|
if (pci_ari_enabled(dev->bus))
|
|
slot = 0;
|
|
else
|
|
slot = PCI_SLOT(dev->devfn);
|
|
|
|
return (((pin - 1) + slot) % 4) + 1;
|
|
}
|
|
|
|
int
|
|
pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
|
|
{
|
|
u8 pin;
|
|
|
|
pin = dev->pin;
|
|
if (!pin)
|
|
return -1;
|
|
|
|
while (!pci_is_root_bus(dev->bus)) {
|
|
pin = pci_swizzle_interrupt_pin(dev, pin);
|
|
dev = dev->bus->self;
|
|
}
|
|
*bridge = dev;
|
|
return pin;
|
|
}
|
|
|
|
/**
|
|
* pci_common_swizzle - swizzle INTx all the way to root bridge
|
|
* @dev: the PCI device
|
|
* @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
|
|
*
|
|
* Perform INTx swizzling for a device. This traverses through all PCI-to-PCI
|
|
* bridges all the way up to a PCI root bus.
|
|
*/
|
|
u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
|
|
{
|
|
u8 pin = *pinp;
|
|
|
|
while (!pci_is_root_bus(dev->bus)) {
|
|
pin = pci_swizzle_interrupt_pin(dev, pin);
|
|
dev = dev->bus->self;
|
|
}
|
|
*pinp = pin;
|
|
return PCI_SLOT(dev->devfn);
|
|
}
|
|
|
|
/**
|
|
* pci_release_region - Release a PCI bar
|
|
* @pdev: PCI device whose resources were previously reserved by pci_request_region
|
|
* @bar: BAR to release
|
|
*
|
|
* Releases the PCI I/O and memory resources previously reserved by a
|
|
* successful call to pci_request_region. Call this function only
|
|
* after all use of the PCI regions has ceased.
|
|
*/
|
|
void pci_release_region(struct pci_dev *pdev, int bar)
|
|
{
|
|
struct pci_devres *dr;
|
|
|
|
if (pci_resource_len(pdev, bar) == 0)
|
|
return;
|
|
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
|
|
release_region(pci_resource_start(pdev, bar),
|
|
pci_resource_len(pdev, bar));
|
|
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
|
|
release_mem_region(pci_resource_start(pdev, bar),
|
|
pci_resource_len(pdev, bar));
|
|
|
|
dr = find_pci_dr(pdev);
|
|
if (dr)
|
|
dr->region_mask &= ~(1 << bar);
|
|
}
|
|
|
|
/**
|
|
* __pci_request_region - Reserved PCI I/O and memory resource
|
|
* @pdev: PCI device whose resources are to be reserved
|
|
* @bar: BAR to be reserved
|
|
* @res_name: Name to be associated with resource.
|
|
* @exclusive: whether the region access is exclusive or not
|
|
*
|
|
* Mark the PCI region associated with PCI device @pdev BR @bar as
|
|
* being reserved by owner @res_name. Do not access any
|
|
* address inside the PCI regions unless this call returns
|
|
* successfully.
|
|
*
|
|
* If @exclusive is set, then the region is marked so that userspace
|
|
* is explicitly not allowed to map the resource via /dev/mem or
|
|
* sysfs MMIO access.
|
|
*
|
|
* Returns 0 on success, or %EBUSY on error. A warning
|
|
* message is also printed on failure.
|
|
*/
|
|
static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name,
|
|
int exclusive)
|
|
{
|
|
struct pci_devres *dr;
|
|
|
|
if (pci_resource_len(pdev, bar) == 0)
|
|
return 0;
|
|
|
|
if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
|
|
if (!request_region(pci_resource_start(pdev, bar),
|
|
pci_resource_len(pdev, bar), res_name))
|
|
goto err_out;
|
|
}
|
|
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
|
|
if (!__request_mem_region(pci_resource_start(pdev, bar),
|
|
pci_resource_len(pdev, bar), res_name,
|
|
exclusive))
|
|
goto err_out;
|
|
}
|
|
|
|
dr = find_pci_dr(pdev);
|
|
if (dr)
|
|
dr->region_mask |= 1 << bar;
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
dev_warn(&pdev->dev, "BAR %d: can't reserve %pR\n", bar,
|
|
&pdev->resource[bar]);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/**
|
|
* pci_request_region - Reserve PCI I/O and memory resource
|
|
* @pdev: PCI device whose resources are to be reserved
|
|
* @bar: BAR to be reserved
|
|
* @res_name: Name to be associated with resource
|
|
*
|
|
* Mark the PCI region associated with PCI device @pdev BAR @bar as
|
|
* being reserved by owner @res_name. Do not access any
|
|
* address inside the PCI regions unless this call returns
|
|
* successfully.
|
|
*
|
|
* Returns 0 on success, or %EBUSY on error. A warning
|
|
* message is also printed on failure.
|
|
*/
|
|
int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
|
|
{
|
|
return __pci_request_region(pdev, bar, res_name, 0);
|
|
}
|
|
|
|
/**
|
|
* pci_request_region_exclusive - Reserved PCI I/O and memory resource
|
|
* @pdev: PCI device whose resources are to be reserved
|
|
* @bar: BAR to be reserved
|
|
* @res_name: Name to be associated with resource.
|
|
*
|
|
* Mark the PCI region associated with PCI device @pdev BR @bar as
|
|
* being reserved by owner @res_name. Do not access any
|
|
* address inside the PCI regions unless this call returns
|
|
* successfully.
|
|
*
|
|
* Returns 0 on success, or %EBUSY on error. A warning
|
|
* message is also printed on failure.
|
|
*
|
|
* The key difference that _exclusive makes it that userspace is
|
|
* explicitly not allowed to map the resource via /dev/mem or
|
|
* sysfs.
|
|
*/
|
|
int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
|
|
{
|
|
return __pci_request_region(pdev, bar, res_name, IORESOURCE_EXCLUSIVE);
|
|
}
|
|
/**
|
|
* pci_release_selected_regions - Release selected PCI I/O and memory resources
|
|
* @pdev: PCI device whose resources were previously reserved
|
|
* @bars: Bitmask of BARs to be released
|
|
*
|
|
* Release selected PCI I/O and memory resources previously reserved.
|
|
* Call this function only after all use of the PCI regions has ceased.
|
|
*/
|
|
void pci_release_selected_regions(struct pci_dev *pdev, int bars)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
if (bars & (1 << i))
|
|
pci_release_region(pdev, i);
|
|
}
|
|
|
|
int __pci_request_selected_regions(struct pci_dev *pdev, int bars,
|
|
const char *res_name, int excl)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
if (bars & (1 << i))
|
|
if (__pci_request_region(pdev, i, res_name, excl))
|
|
goto err_out;
|
|
return 0;
|
|
|
|
err_out:
|
|
while(--i >= 0)
|
|
if (bars & (1 << i))
|
|
pci_release_region(pdev, i);
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
|
|
/**
|
|
* pci_request_selected_regions - Reserve selected PCI I/O and memory resources
|
|
* @pdev: PCI device whose resources are to be reserved
|
|
* @bars: Bitmask of BARs to be requested
|
|
* @res_name: Name to be associated with resource
|
|
*/
|
|
int pci_request_selected_regions(struct pci_dev *pdev, int bars,
|
|
const char *res_name)
|
|
{
|
|
return __pci_request_selected_regions(pdev, bars, res_name, 0);
|
|
}
|
|
|
|
int pci_request_selected_regions_exclusive(struct pci_dev *pdev,
|
|
int bars, const char *res_name)
|
|
{
|
|
return __pci_request_selected_regions(pdev, bars, res_name,
|
|
IORESOURCE_EXCLUSIVE);
|
|
}
|
|
|
|
/**
|
|
* pci_release_regions - Release reserved PCI I/O and memory resources
|
|
* @pdev: PCI device whose resources were previously reserved by pci_request_regions
|
|
*
|
|
* Releases all PCI I/O and memory resources previously reserved by a
|
|
* successful call to pci_request_regions. Call this function only
|
|
* after all use of the PCI regions has ceased.
|
|
*/
|
|
|
|
void pci_release_regions(struct pci_dev *pdev)
|
|
{
|
|
pci_release_selected_regions(pdev, (1 << 6) - 1);
|
|
}
|
|
|
|
/**
|
|
* pci_request_regions - Reserved PCI I/O and memory resources
|
|
* @pdev: PCI device whose resources are to be reserved
|
|
* @res_name: Name to be associated with resource.
|
|
*
|
|
* Mark all PCI regions associated with PCI device @pdev as
|
|
* being reserved by owner @res_name. Do not access any
|
|
* address inside the PCI regions unless this call returns
|
|
* successfully.
|
|
*
|
|
* Returns 0 on success, or %EBUSY on error. A warning
|
|
* message is also printed on failure.
|
|
*/
|
|
int pci_request_regions(struct pci_dev *pdev, const char *res_name)
|
|
{
|
|
return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
|
|
}
|
|
|
|
/**
|
|
* pci_request_regions_exclusive - Reserved PCI I/O and memory resources
|
|
* @pdev: PCI device whose resources are to be reserved
|
|
* @res_name: Name to be associated with resource.
|
|
*
|
|
* Mark all PCI regions associated with PCI device @pdev as
|
|
* being reserved by owner @res_name. Do not access any
|
|
* address inside the PCI regions unless this call returns
|
|
* successfully.
|
|
*
|
|
* pci_request_regions_exclusive() will mark the region so that
|
|
* /dev/mem and the sysfs MMIO access will not be allowed.
|
|
*
|
|
* Returns 0 on success, or %EBUSY on error. A warning
|
|
* message is also printed on failure.
|
|
*/
|
|
int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
|
|
{
|
|
return pci_request_selected_regions_exclusive(pdev,
|
|
((1 << 6) - 1), res_name);
|
|
}
|
|
|
|
static void __pci_set_master(struct pci_dev *dev, bool enable)
|
|
{
|
|
u16 old_cmd, cmd;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &old_cmd);
|
|
if (enable)
|
|
cmd = old_cmd | PCI_COMMAND_MASTER;
|
|
else
|
|
cmd = old_cmd & ~PCI_COMMAND_MASTER;
|
|
if (cmd != old_cmd) {
|
|
dev_dbg(&dev->dev, "%s bus mastering\n",
|
|
enable ? "enabling" : "disabling");
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
dev->is_busmaster = enable;
|
|
}
|
|
|
|
/**
|
|
* pci_set_master - enables bus-mastering for device dev
|
|
* @dev: the PCI device to enable
|
|
*
|
|
* Enables bus-mastering on the device and calls pcibios_set_master()
|
|
* to do the needed arch specific settings.
|
|
*/
|
|
void pci_set_master(struct pci_dev *dev)
|
|
{
|
|
__pci_set_master(dev, true);
|
|
pcibios_set_master(dev);
|
|
}
|
|
|
|
/**
|
|
* pci_clear_master - disables bus-mastering for device dev
|
|
* @dev: the PCI device to disable
|
|
*/
|
|
void pci_clear_master(struct pci_dev *dev)
|
|
{
|
|
__pci_set_master(dev, false);
|
|
}
|
|
|
|
/**
|
|
* pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
|
|
* @dev: the PCI device for which MWI is to be enabled
|
|
*
|
|
* Helper function for pci_set_mwi.
|
|
* Originally copied from drivers/net/acenic.c.
|
|
* Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int pci_set_cacheline_size(struct pci_dev *dev)
|
|
{
|
|
u8 cacheline_size;
|
|
|
|
if (!pci_cache_line_size)
|
|
return -EINVAL;
|
|
|
|
/* Validate current setting: the PCI_CACHE_LINE_SIZE must be
|
|
equal to or multiple of the right value. */
|
|
pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
|
|
if (cacheline_size >= pci_cache_line_size &&
|
|
(cacheline_size % pci_cache_line_size) == 0)
|
|
return 0;
|
|
|
|
/* Write the correct value. */
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
|
|
/* Read it back. */
|
|
pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &cacheline_size);
|
|
if (cacheline_size == pci_cache_line_size)
|
|
return 0;
|
|
|
|
dev_printk(KERN_DEBUG, &dev->dev, "cache line size of %d is not "
|
|
"supported\n", pci_cache_line_size << 2);
|
|
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_set_cacheline_size);
|
|
|
|
#ifdef PCI_DISABLE_MWI
|
|
int pci_set_mwi(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int pci_try_set_mwi(struct pci_dev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
void pci_clear_mwi(struct pci_dev *dev)
|
|
{
|
|
}
|
|
|
|
#else
|
|
|
|
/**
|
|
* pci_set_mwi - enables memory-write-invalidate PCI transaction
|
|
* @dev: the PCI device for which MWI is enabled
|
|
*
|
|
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int
|
|
pci_set_mwi(struct pci_dev *dev)
|
|
{
|
|
int rc;
|
|
u16 cmd;
|
|
|
|
rc = pci_set_cacheline_size(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
|
|
dev_dbg(&dev->dev, "enabling Mem-Wr-Inval\n");
|
|
cmd |= PCI_COMMAND_INVALIDATE;
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_try_set_mwi - enables memory-write-invalidate PCI transaction
|
|
* @dev: the PCI device for which MWI is enabled
|
|
*
|
|
* Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
|
|
* Callers are not required to check the return value.
|
|
*
|
|
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
|
|
*/
|
|
int pci_try_set_mwi(struct pci_dev *dev)
|
|
{
|
|
int rc = pci_set_mwi(dev);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* pci_clear_mwi - disables Memory-Write-Invalidate for device dev
|
|
* @dev: the PCI device to disable
|
|
*
|
|
* Disables PCI Memory-Write-Invalidate transaction on the device
|
|
*/
|
|
void
|
|
pci_clear_mwi(struct pci_dev *dev)
|
|
{
|
|
u16 cmd;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
if (cmd & PCI_COMMAND_INVALIDATE) {
|
|
cmd &= ~PCI_COMMAND_INVALIDATE;
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
}
|
|
#endif /* ! PCI_DISABLE_MWI */
|
|
|
|
/**
|
|
* pci_intx - enables/disables PCI INTx for device dev
|
|
* @pdev: the PCI device to operate on
|
|
* @enable: boolean: whether to enable or disable PCI INTx
|
|
*
|
|
* Enables/disables PCI INTx for device dev
|
|
*/
|
|
void
|
|
pci_intx(struct pci_dev *pdev, int enable)
|
|
{
|
|
u16 pci_command, new;
|
|
|
|
pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
|
|
|
|
if (enable) {
|
|
new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
|
|
} else {
|
|
new = pci_command | PCI_COMMAND_INTX_DISABLE;
|
|
}
|
|
|
|
if (new != pci_command) {
|
|
struct pci_devres *dr;
|
|
|
|
pci_write_config_word(pdev, PCI_COMMAND, new);
|
|
|
|
dr = find_pci_dr(pdev);
|
|
if (dr && !dr->restore_intx) {
|
|
dr->restore_intx = 1;
|
|
dr->orig_intx = !enable;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* pci_msi_off - disables any msi or msix capabilities
|
|
* @dev: the PCI device to operate on
|
|
*
|
|
* If you want to use msi see pci_enable_msi and friends.
|
|
* This is a lower level primitive that allows us to disable
|
|
* msi operation at the device level.
|
|
*/
|
|
void pci_msi_off(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
u16 control;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
|
|
if (pos) {
|
|
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
|
|
control &= ~PCI_MSI_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
|
|
}
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
if (pos) {
|
|
pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
|
|
control &= ~PCI_MSIX_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_msi_off);
|
|
|
|
int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
|
|
{
|
|
return dma_set_max_seg_size(&dev->dev, size);
|
|
}
|
|
EXPORT_SYMBOL(pci_set_dma_max_seg_size);
|
|
|
|
int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
|
|
{
|
|
return dma_set_seg_boundary(&dev->dev, mask);
|
|
}
|
|
EXPORT_SYMBOL(pci_set_dma_seg_boundary);
|
|
|
|
static int pcie_flr(struct pci_dev *dev, int probe)
|
|
{
|
|
int i;
|
|
int pos;
|
|
u32 cap;
|
|
u16 status, control;
|
|
|
|
pos = pci_pcie_cap(dev);
|
|
if (!pos)
|
|
return -ENOTTY;
|
|
|
|
pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
|
|
if (!(cap & PCI_EXP_DEVCAP_FLR))
|
|
return -ENOTTY;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
/* Wait for Transaction Pending bit clean */
|
|
for (i = 0; i < 4; i++) {
|
|
if (i)
|
|
msleep((1 << (i - 1)) * 100);
|
|
|
|
pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
|
|
if (!(status & PCI_EXP_DEVSTA_TRPND))
|
|
goto clear;
|
|
}
|
|
|
|
dev_err(&dev->dev, "transaction is not cleared; "
|
|
"proceeding with reset anyway\n");
|
|
|
|
clear:
|
|
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &control);
|
|
control |= PCI_EXP_DEVCTL_BCR_FLR;
|
|
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, control);
|
|
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_af_flr(struct pci_dev *dev, int probe)
|
|
{
|
|
int i;
|
|
int pos;
|
|
u8 cap;
|
|
u8 status;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_AF);
|
|
if (!pos)
|
|
return -ENOTTY;
|
|
|
|
pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
|
|
if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
|
|
return -ENOTTY;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
/* Wait for Transaction Pending bit clean */
|
|
for (i = 0; i < 4; i++) {
|
|
if (i)
|
|
msleep((1 << (i - 1)) * 100);
|
|
|
|
pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
|
|
if (!(status & PCI_AF_STATUS_TP))
|
|
goto clear;
|
|
}
|
|
|
|
dev_err(&dev->dev, "transaction is not cleared; "
|
|
"proceeding with reset anyway\n");
|
|
|
|
clear:
|
|
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_pm_reset(struct pci_dev *dev, int probe)
|
|
{
|
|
u16 csr;
|
|
|
|
if (!dev->pm_cap)
|
|
return -ENOTTY;
|
|
|
|
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
|
|
if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
|
|
return -ENOTTY;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
if (dev->current_state != PCI_D0)
|
|
return -EINVAL;
|
|
|
|
csr &= ~PCI_PM_CTRL_STATE_MASK;
|
|
csr |= PCI_D3hot;
|
|
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
|
|
pci_dev_d3_sleep(dev);
|
|
|
|
csr &= ~PCI_PM_CTRL_STATE_MASK;
|
|
csr |= PCI_D0;
|
|
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
|
|
pci_dev_d3_sleep(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
|
|
{
|
|
u16 ctrl;
|
|
struct pci_dev *pdev;
|
|
|
|
if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
|
|
return -ENOTTY;
|
|
|
|
list_for_each_entry(pdev, &dev->bus->devices, bus_list)
|
|
if (pdev != dev)
|
|
return -ENOTTY;
|
|
|
|
if (probe)
|
|
return 0;
|
|
|
|
pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
|
|
ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
|
|
pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
|
|
msleep(100);
|
|
|
|
ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
|
|
pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_dev_reset(struct pci_dev *dev, int probe)
|
|
{
|
|
int rc;
|
|
|
|
might_sleep();
|
|
|
|
if (!probe) {
|
|
pci_block_user_cfg_access(dev);
|
|
/* block PM suspend, driver probe, etc. */
|
|
device_lock(&dev->dev);
|
|
}
|
|
|
|
rc = pci_dev_specific_reset(dev, probe);
|
|
if (rc != -ENOTTY)
|
|
goto done;
|
|
|
|
rc = pcie_flr(dev, probe);
|
|
if (rc != -ENOTTY)
|
|
goto done;
|
|
|
|
rc = pci_af_flr(dev, probe);
|
|
if (rc != -ENOTTY)
|
|
goto done;
|
|
|
|
rc = pci_pm_reset(dev, probe);
|
|
if (rc != -ENOTTY)
|
|
goto done;
|
|
|
|
rc = pci_parent_bus_reset(dev, probe);
|
|
done:
|
|
if (!probe) {
|
|
device_unlock(&dev->dev);
|
|
pci_unblock_user_cfg_access(dev);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* __pci_reset_function - reset a PCI device function
|
|
* @dev: PCI device to reset
|
|
*
|
|
* Some devices allow an individual function to be reset without affecting
|
|
* other functions in the same device. The PCI device must be responsive
|
|
* to PCI config space in order to use this function.
|
|
*
|
|
* The device function is presumed to be unused when this function is called.
|
|
* Resetting the device will make the contents of PCI configuration space
|
|
* random, so any caller of this must be prepared to reinitialise the
|
|
* device including MSI, bus mastering, BARs, decoding IO and memory spaces,
|
|
* etc.
|
|
*
|
|
* Returns 0 if the device function was successfully reset or negative if the
|
|
* device doesn't support resetting a single function.
|
|
*/
|
|
int __pci_reset_function(struct pci_dev *dev)
|
|
{
|
|
return pci_dev_reset(dev, 0);
|
|
}
|
|
EXPORT_SYMBOL_GPL(__pci_reset_function);
|
|
|
|
/**
|
|
* pci_probe_reset_function - check whether the device can be safely reset
|
|
* @dev: PCI device to reset
|
|
*
|
|
* Some devices allow an individual function to be reset without affecting
|
|
* other functions in the same device. The PCI device must be responsive
|
|
* to PCI config space in order to use this function.
|
|
*
|
|
* Returns 0 if the device function can be reset or negative if the
|
|
* device doesn't support resetting a single function.
|
|
*/
|
|
int pci_probe_reset_function(struct pci_dev *dev)
|
|
{
|
|
return pci_dev_reset(dev, 1);
|
|
}
|
|
|
|
/**
|
|
* pci_reset_function - quiesce and reset a PCI device function
|
|
* @dev: PCI device to reset
|
|
*
|
|
* Some devices allow an individual function to be reset without affecting
|
|
* other functions in the same device. The PCI device must be responsive
|
|
* to PCI config space in order to use this function.
|
|
*
|
|
* This function does not just reset the PCI portion of a device, but
|
|
* clears all the state associated with the device. This function differs
|
|
* from __pci_reset_function in that it saves and restores device state
|
|
* over the reset.
|
|
*
|
|
* Returns 0 if the device function was successfully reset or negative if the
|
|
* device doesn't support resetting a single function.
|
|
*/
|
|
int pci_reset_function(struct pci_dev *dev)
|
|
{
|
|
int rc;
|
|
|
|
rc = pci_dev_reset(dev, 1);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pci_save_state(dev);
|
|
|
|
/*
|
|
* both INTx and MSI are disabled after the Interrupt Disable bit
|
|
* is set and the Bus Master bit is cleared.
|
|
*/
|
|
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
|
|
|
|
rc = pci_dev_reset(dev, 0);
|
|
|
|
pci_restore_state(dev);
|
|
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_reset_function);
|
|
|
|
/**
|
|
* pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
|
|
* @dev: PCI device to query
|
|
*
|
|
* Returns mmrbc: maximum designed memory read count in bytes
|
|
* or appropriate error value.
|
|
*/
|
|
int pcix_get_max_mmrbc(struct pci_dev *dev)
|
|
{
|
|
int cap;
|
|
u32 stat;
|
|
|
|
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
|
|
if (!cap)
|
|
return -EINVAL;
|
|
|
|
if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
|
|
return -EINVAL;
|
|
|
|
return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21);
|
|
}
|
|
EXPORT_SYMBOL(pcix_get_max_mmrbc);
|
|
|
|
/**
|
|
* pcix_get_mmrbc - get PCI-X maximum memory read byte count
|
|
* @dev: PCI device to query
|
|
*
|
|
* Returns mmrbc: maximum memory read count in bytes
|
|
* or appropriate error value.
|
|
*/
|
|
int pcix_get_mmrbc(struct pci_dev *dev)
|
|
{
|
|
int cap;
|
|
u16 cmd;
|
|
|
|
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
|
|
if (!cap)
|
|
return -EINVAL;
|
|
|
|
if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
|
|
return -EINVAL;
|
|
|
|
return 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
|
|
}
|
|
EXPORT_SYMBOL(pcix_get_mmrbc);
|
|
|
|
/**
|
|
* pcix_set_mmrbc - set PCI-X maximum memory read byte count
|
|
* @dev: PCI device to query
|
|
* @mmrbc: maximum memory read count in bytes
|
|
* valid values are 512, 1024, 2048, 4096
|
|
*
|
|
* If possible sets maximum memory read byte count, some bridges have erratas
|
|
* that prevent this.
|
|
*/
|
|
int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
|
|
{
|
|
int cap;
|
|
u32 stat, v, o;
|
|
u16 cmd;
|
|
|
|
if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc))
|
|
return -EINVAL;
|
|
|
|
v = ffs(mmrbc) - 10;
|
|
|
|
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
|
|
if (!cap)
|
|
return -EINVAL;
|
|
|
|
if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
|
|
return -EINVAL;
|
|
|
|
if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
|
|
return -E2BIG;
|
|
|
|
if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
|
|
return -EINVAL;
|
|
|
|
o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
|
|
if (o != v) {
|
|
if (v > o && dev->bus &&
|
|
(dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
|
|
return -EIO;
|
|
|
|
cmd &= ~PCI_X_CMD_MAX_READ;
|
|
cmd |= v << 2;
|
|
if (pci_write_config_word(dev, cap + PCI_X_CMD, cmd))
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(pcix_set_mmrbc);
|
|
|
|
/**
|
|
* pcie_get_readrq - get PCI Express read request size
|
|
* @dev: PCI device to query
|
|
*
|
|
* Returns maximum memory read request in bytes
|
|
* or appropriate error value.
|
|
*/
|
|
int pcie_get_readrq(struct pci_dev *dev)
|
|
{
|
|
int ret, cap;
|
|
u16 ctl;
|
|
|
|
cap = pci_pcie_cap(dev);
|
|
if (!cap)
|
|
return -EINVAL;
|
|
|
|
ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
|
|
if (!ret)
|
|
ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(pcie_get_readrq);
|
|
|
|
/**
|
|
* pcie_set_readrq - set PCI Express maximum memory read request
|
|
* @dev: PCI device to query
|
|
* @rq: maximum memory read count in bytes
|
|
* valid values are 128, 256, 512, 1024, 2048, 4096
|
|
*
|
|
* If possible sets maximum read byte count
|
|
*/
|
|
int pcie_set_readrq(struct pci_dev *dev, int rq)
|
|
{
|
|
int cap, err = -EINVAL;
|
|
u16 ctl, v;
|
|
|
|
if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
|
|
goto out;
|
|
|
|
v = (ffs(rq) - 8) << 12;
|
|
|
|
cap = pci_pcie_cap(dev);
|
|
if (!cap)
|
|
goto out;
|
|
|
|
err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
|
|
if (err)
|
|
goto out;
|
|
|
|
if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
|
|
ctl &= ~PCI_EXP_DEVCTL_READRQ;
|
|
ctl |= v;
|
|
err = pci_write_config_dword(dev, cap + PCI_EXP_DEVCTL, ctl);
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL(pcie_set_readrq);
|
|
|
|
/**
|
|
* pci_select_bars - Make BAR mask from the type of resource
|
|
* @dev: the PCI device for which BAR mask is made
|
|
* @flags: resource type mask to be selected
|
|
*
|
|
* This helper routine makes bar mask from the type of resource.
|
|
*/
|
|
int pci_select_bars(struct pci_dev *dev, unsigned long flags)
|
|
{
|
|
int i, bars = 0;
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++)
|
|
if (pci_resource_flags(dev, i) & flags)
|
|
bars |= (1 << i);
|
|
return bars;
|
|
}
|
|
|
|
/**
|
|
* pci_resource_bar - get position of the BAR associated with a resource
|
|
* @dev: the PCI device
|
|
* @resno: the resource number
|
|
* @type: the BAR type to be filled in
|
|
*
|
|
* Returns BAR position in config space, or 0 if the BAR is invalid.
|
|
*/
|
|
int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
|
|
{
|
|
int reg;
|
|
|
|
if (resno < PCI_ROM_RESOURCE) {
|
|
*type = pci_bar_unknown;
|
|
return PCI_BASE_ADDRESS_0 + 4 * resno;
|
|
} else if (resno == PCI_ROM_RESOURCE) {
|
|
*type = pci_bar_mem32;
|
|
return dev->rom_base_reg;
|
|
} else if (resno < PCI_BRIDGE_RESOURCES) {
|
|
/* device specific resource */
|
|
reg = pci_iov_resource_bar(dev, resno, type);
|
|
if (reg)
|
|
return reg;
|
|
}
|
|
|
|
dev_err(&dev->dev, "BAR %d: invalid resource\n", resno);
|
|
return 0;
|
|
}
|
|
|
|
/* Some architectures require additional programming to enable VGA */
|
|
static arch_set_vga_state_t arch_set_vga_state;
|
|
|
|
void __init pci_register_set_vga_state(arch_set_vga_state_t func)
|
|
{
|
|
arch_set_vga_state = func; /* NULL disables */
|
|
}
|
|
|
|
static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
|
|
unsigned int command_bits, bool change_bridge)
|
|
{
|
|
if (arch_set_vga_state)
|
|
return arch_set_vga_state(dev, decode, command_bits,
|
|
change_bridge);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_set_vga_state - set VGA decode state on device and parents if requested
|
|
* @dev: the PCI device
|
|
* @decode: true = enable decoding, false = disable decoding
|
|
* @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
|
|
* @change_bridge: traverse ancestors and change bridges
|
|
*/
|
|
int pci_set_vga_state(struct pci_dev *dev, bool decode,
|
|
unsigned int command_bits, bool change_bridge)
|
|
{
|
|
struct pci_bus *bus;
|
|
struct pci_dev *bridge;
|
|
u16 cmd;
|
|
int rc;
|
|
|
|
WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
|
|
|
|
/* ARCH specific VGA enables */
|
|
rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
if (decode == true)
|
|
cmd |= command_bits;
|
|
else
|
|
cmd &= ~command_bits;
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
|
|
if (change_bridge == false)
|
|
return 0;
|
|
|
|
bus = dev->bus;
|
|
while (bus) {
|
|
bridge = bus->self;
|
|
if (bridge) {
|
|
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
|
|
&cmd);
|
|
if (decode == true)
|
|
cmd |= PCI_BRIDGE_CTL_VGA;
|
|
else
|
|
cmd &= ~PCI_BRIDGE_CTL_VGA;
|
|
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL,
|
|
cmd);
|
|
}
|
|
bus = bus->parent;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
|
|
static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
|
|
static DEFINE_SPINLOCK(resource_alignment_lock);
|
|
|
|
/**
|
|
* pci_specified_resource_alignment - get resource alignment specified by user.
|
|
* @dev: the PCI device to get
|
|
*
|
|
* RETURNS: Resource alignment if it is specified.
|
|
* Zero if it is not specified.
|
|
*/
|
|
resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
|
|
{
|
|
int seg, bus, slot, func, align_order, count;
|
|
resource_size_t align = 0;
|
|
char *p;
|
|
|
|
spin_lock(&resource_alignment_lock);
|
|
p = resource_alignment_param;
|
|
while (*p) {
|
|
count = 0;
|
|
if (sscanf(p, "%d%n", &align_order, &count) == 1 &&
|
|
p[count] == '@') {
|
|
p += count + 1;
|
|
} else {
|
|
align_order = -1;
|
|
}
|
|
if (sscanf(p, "%x:%x:%x.%x%n",
|
|
&seg, &bus, &slot, &func, &count) != 4) {
|
|
seg = 0;
|
|
if (sscanf(p, "%x:%x.%x%n",
|
|
&bus, &slot, &func, &count) != 3) {
|
|
/* Invalid format */
|
|
printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
|
|
p);
|
|
break;
|
|
}
|
|
}
|
|
p += count;
|
|
if (seg == pci_domain_nr(dev->bus) &&
|
|
bus == dev->bus->number &&
|
|
slot == PCI_SLOT(dev->devfn) &&
|
|
func == PCI_FUNC(dev->devfn)) {
|
|
if (align_order == -1) {
|
|
align = PAGE_SIZE;
|
|
} else {
|
|
align = 1 << align_order;
|
|
}
|
|
/* Found */
|
|
break;
|
|
}
|
|
if (*p != ';' && *p != ',') {
|
|
/* End of param or invalid format */
|
|
break;
|
|
}
|
|
p++;
|
|
}
|
|
spin_unlock(&resource_alignment_lock);
|
|
return align;
|
|
}
|
|
|
|
/**
|
|
* pci_is_reassigndev - check if specified PCI is target device to reassign
|
|
* @dev: the PCI device to check
|
|
*
|
|
* RETURNS: non-zero for PCI device is a target device to reassign,
|
|
* or zero is not.
|
|
*/
|
|
int pci_is_reassigndev(struct pci_dev *dev)
|
|
{
|
|
return (pci_specified_resource_alignment(dev) != 0);
|
|
}
|
|
|
|
ssize_t pci_set_resource_alignment_param(const char *buf, size_t count)
|
|
{
|
|
if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1)
|
|
count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1;
|
|
spin_lock(&resource_alignment_lock);
|
|
strncpy(resource_alignment_param, buf, count);
|
|
resource_alignment_param[count] = '\0';
|
|
spin_unlock(&resource_alignment_lock);
|
|
return count;
|
|
}
|
|
|
|
ssize_t pci_get_resource_alignment_param(char *buf, size_t size)
|
|
{
|
|
size_t count;
|
|
spin_lock(&resource_alignment_lock);
|
|
count = snprintf(buf, size, "%s", resource_alignment_param);
|
|
spin_unlock(&resource_alignment_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf)
|
|
{
|
|
return pci_get_resource_alignment_param(buf, PAGE_SIZE);
|
|
}
|
|
|
|
static ssize_t pci_resource_alignment_store(struct bus_type *bus,
|
|
const char *buf, size_t count)
|
|
{
|
|
return pci_set_resource_alignment_param(buf, count);
|
|
}
|
|
|
|
BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
|
|
pci_resource_alignment_store);
|
|
|
|
static int __init pci_resource_alignment_sysfs_init(void)
|
|
{
|
|
return bus_create_file(&pci_bus_type,
|
|
&bus_attr_resource_alignment);
|
|
}
|
|
|
|
late_initcall(pci_resource_alignment_sysfs_init);
|
|
|
|
static void __devinit pci_no_domains(void)
|
|
{
|
|
#ifdef CONFIG_PCI_DOMAINS
|
|
pci_domains_supported = 0;
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* pci_ext_cfg_enabled - can we access extended PCI config space?
|
|
* @dev: The PCI device of the root bridge.
|
|
*
|
|
* Returns 1 if we can access PCI extended config space (offsets
|
|
* greater than 0xff). This is the default implementation. Architecture
|
|
* implementations can override this.
|
|
*/
|
|
int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
void __weak pci_fixup_cardbus(struct pci_bus *bus)
|
|
{
|
|
}
|
|
EXPORT_SYMBOL(pci_fixup_cardbus);
|
|
|
|
static int __init pci_setup(char *str)
|
|
{
|
|
while (str) {
|
|
char *k = strchr(str, ',');
|
|
if (k)
|
|
*k++ = 0;
|
|
if (*str && (str = pcibios_setup(str)) && *str) {
|
|
if (!strcmp(str, "nomsi")) {
|
|
pci_no_msi();
|
|
} else if (!strcmp(str, "noaer")) {
|
|
pci_no_aer();
|
|
} else if (!strcmp(str, "nodomains")) {
|
|
pci_no_domains();
|
|
} else if (!strncmp(str, "cbiosize=", 9)) {
|
|
pci_cardbus_io_size = memparse(str + 9, &str);
|
|
} else if (!strncmp(str, "cbmemsize=", 10)) {
|
|
pci_cardbus_mem_size = memparse(str + 10, &str);
|
|
} else if (!strncmp(str, "resource_alignment=", 19)) {
|
|
pci_set_resource_alignment_param(str + 19,
|
|
strlen(str + 19));
|
|
} else if (!strncmp(str, "ecrc=", 5)) {
|
|
pcie_ecrc_get_policy(str + 5);
|
|
} else if (!strncmp(str, "hpiosize=", 9)) {
|
|
pci_hotplug_io_size = memparse(str + 9, &str);
|
|
} else if (!strncmp(str, "hpmemsize=", 10)) {
|
|
pci_hotplug_mem_size = memparse(str + 10, &str);
|
|
} else {
|
|
printk(KERN_ERR "PCI: Unknown option `%s'\n",
|
|
str);
|
|
}
|
|
}
|
|
str = k;
|
|
}
|
|
return 0;
|
|
}
|
|
early_param("pci", pci_setup);
|
|
|
|
EXPORT_SYMBOL(pci_reenable_device);
|
|
EXPORT_SYMBOL(pci_enable_device_io);
|
|
EXPORT_SYMBOL(pci_enable_device_mem);
|
|
EXPORT_SYMBOL(pci_enable_device);
|
|
EXPORT_SYMBOL(pcim_enable_device);
|
|
EXPORT_SYMBOL(pcim_pin_device);
|
|
EXPORT_SYMBOL(pci_disable_device);
|
|
EXPORT_SYMBOL(pci_find_capability);
|
|
EXPORT_SYMBOL(pci_bus_find_capability);
|
|
EXPORT_SYMBOL(pci_release_regions);
|
|
EXPORT_SYMBOL(pci_request_regions);
|
|
EXPORT_SYMBOL(pci_request_regions_exclusive);
|
|
EXPORT_SYMBOL(pci_release_region);
|
|
EXPORT_SYMBOL(pci_request_region);
|
|
EXPORT_SYMBOL(pci_request_region_exclusive);
|
|
EXPORT_SYMBOL(pci_release_selected_regions);
|
|
EXPORT_SYMBOL(pci_request_selected_regions);
|
|
EXPORT_SYMBOL(pci_request_selected_regions_exclusive);
|
|
EXPORT_SYMBOL(pci_set_master);
|
|
EXPORT_SYMBOL(pci_clear_master);
|
|
EXPORT_SYMBOL(pci_set_mwi);
|
|
EXPORT_SYMBOL(pci_try_set_mwi);
|
|
EXPORT_SYMBOL(pci_clear_mwi);
|
|
EXPORT_SYMBOL_GPL(pci_intx);
|
|
EXPORT_SYMBOL(pci_assign_resource);
|
|
EXPORT_SYMBOL(pci_find_parent_resource);
|
|
EXPORT_SYMBOL(pci_select_bars);
|
|
|
|
EXPORT_SYMBOL(pci_set_power_state);
|
|
EXPORT_SYMBOL(pci_save_state);
|
|
EXPORT_SYMBOL(pci_restore_state);
|
|
EXPORT_SYMBOL(pci_pme_capable);
|
|
EXPORT_SYMBOL(pci_pme_active);
|
|
EXPORT_SYMBOL(pci_wake_from_d3);
|
|
EXPORT_SYMBOL(pci_target_state);
|
|
EXPORT_SYMBOL(pci_prepare_to_sleep);
|
|
EXPORT_SYMBOL(pci_back_from_sleep);
|
|
EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state);
|