mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Marek Vasut](/assets/img/avatar_default.png)
This regulator/backlight driver handles the ATTINY88 present on the RPi 7" touchscreen panel and exposes the power/backlight interfaces. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Brown <broonie@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> To: dri-devel@lists.freedesktop.org Link: https://lore.kernel.org/r/20200809105938.6388-2-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
214 lines
5 KiB
C
214 lines
5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
|
*
|
|
* Based on rpi_touchscreen.c by Eric Anholt <eric@anholt.net>
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* I2C registers of the Atmel microcontroller. */
|
|
#define REG_ID 0x80
|
|
#define REG_PORTA 0x81
|
|
#define REG_PORTA_HF BIT(2)
|
|
#define REG_PORTA_VF BIT(3)
|
|
#define REG_PORTB 0x82
|
|
#define REG_POWERON 0x85
|
|
#define REG_PWM 0x86
|
|
|
|
static const struct regmap_config attiny_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = REG_PWM,
|
|
.cache_type = REGCACHE_NONE,
|
|
};
|
|
|
|
static int attiny_lcd_power_enable(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int data;
|
|
|
|
regmap_write(rdev->regmap, REG_POWERON, 1);
|
|
/* Wait for nPWRDWN to go low to indicate poweron is done. */
|
|
regmap_read_poll_timeout(rdev->regmap, REG_PORTB, data,
|
|
data & BIT(0), 10, 1000000);
|
|
|
|
/* Default to the same orientation as the closed source
|
|
* firmware used for the panel. Runtime rotation
|
|
* configuration will be supported using VC4's plane
|
|
* orientation bits.
|
|
*/
|
|
regmap_write(rdev->regmap, REG_PORTA, BIT(2));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int attiny_lcd_power_disable(struct regulator_dev *rdev)
|
|
{
|
|
regmap_write(rdev->regmap, REG_PWM, 0);
|
|
regmap_write(rdev->regmap, REG_POWERON, 0);
|
|
udelay(1);
|
|
return 0;
|
|
}
|
|
|
|
static int attiny_lcd_power_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, REG_POWERON, &data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(data & BIT(0)))
|
|
return 0;
|
|
|
|
ret = regmap_read(rdev->regmap, REG_PORTB, &data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return data & BIT(0);
|
|
}
|
|
|
|
static const struct regulator_init_data attiny_regulator_default = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static const struct regulator_ops attiny_regulator_ops = {
|
|
.enable = attiny_lcd_power_enable,
|
|
.disable = attiny_lcd_power_disable,
|
|
.is_enabled = attiny_lcd_power_is_enabled,
|
|
};
|
|
|
|
static const struct regulator_desc attiny_regulator = {
|
|
.name = "tc358762-power",
|
|
.ops = &attiny_regulator_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int attiny_update_status(struct backlight_device *bl)
|
|
{
|
|
struct regmap *regmap = bl_get_data(bl);
|
|
int brightness = bl->props.brightness;
|
|
|
|
if (bl->props.power != FB_BLANK_UNBLANK ||
|
|
bl->props.fb_blank != FB_BLANK_UNBLANK)
|
|
brightness = 0;
|
|
|
|
return regmap_write(regmap, REG_PWM, brightness);
|
|
}
|
|
|
|
static int attiny_get_brightness(struct backlight_device *bl)
|
|
{
|
|
struct regmap *regmap = bl_get_data(bl);
|
|
int ret, brightness;
|
|
|
|
ret = regmap_read(regmap, REG_PWM, &brightness);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return brightness;
|
|
}
|
|
|
|
static const struct backlight_ops attiny_bl = {
|
|
.update_status = attiny_update_status,
|
|
.get_brightness = attiny_get_brightness,
|
|
};
|
|
|
|
/*
|
|
* I2C driver interface functions
|
|
*/
|
|
static int attiny_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct backlight_properties props = { };
|
|
struct regulator_config config = { };
|
|
struct backlight_device *bl;
|
|
struct regulator_dev *rdev;
|
|
struct regmap *regmap;
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
regmap = devm_regmap_init_i2c(i2c, &attiny_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
ret = PTR_ERR(regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(regmap, REG_ID, &data);
|
|
if (ret < 0) {
|
|
dev_err(&i2c->dev, "Failed to read REG_ID reg: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
switch (data) {
|
|
case 0xde: /* ver 1 */
|
|
case 0xc3: /* ver 2 */
|
|
break;
|
|
default:
|
|
dev_err(&i2c->dev, "Unknown Atmel firmware revision: 0x%02x\n", data);
|
|
return -ENODEV;
|
|
}
|
|
|
|
regmap_write(regmap, REG_POWERON, 0);
|
|
mdelay(1);
|
|
|
|
config.dev = &i2c->dev;
|
|
config.regmap = regmap;
|
|
config.of_node = i2c->dev.of_node;
|
|
config.init_data = &attiny_regulator_default;
|
|
|
|
rdev = devm_regulator_register(&i2c->dev, &attiny_regulator, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&i2c->dev, "Failed to register ATTINY regulator\n");
|
|
return PTR_ERR(rdev);
|
|
}
|
|
|
|
props.type = BACKLIGHT_RAW;
|
|
props.max_brightness = 0xff;
|
|
bl = devm_backlight_device_register(&i2c->dev,
|
|
"7inch-touchscreen-panel-bl",
|
|
&i2c->dev, regmap, &attiny_bl,
|
|
&props);
|
|
if (IS_ERR(bl))
|
|
return PTR_ERR(bl);
|
|
|
|
bl->props.brightness = 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id attiny_dt_ids[] = {
|
|
{ .compatible = "raspberrypi,7inch-touchscreen-panel-regulator" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, attiny_dt_ids);
|
|
|
|
static struct i2c_driver attiny_regulator_driver = {
|
|
.driver = {
|
|
.name = "rpi_touchscreen_attiny",
|
|
.of_match_table = of_match_ptr(attiny_dt_ids),
|
|
},
|
|
.probe = attiny_i2c_probe,
|
|
};
|
|
|
|
module_i2c_driver(attiny_regulator_driver);
|
|
|
|
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
|
|
MODULE_DESCRIPTION("Regulator device driver for Raspberry Pi 7-inch touchscreen");
|
|
MODULE_LICENSE("GPL v2");
|