mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
![Mattias Nilsson](/assets/img/avatar_default.png)
This updates the DB8500 PRCMU driver to the latest version available internally. Nominally we would update the dependent CPUfreq driver at the same time but since that is being moved around in this patch set we postpone that by simply deactivating it for the time being. This is a snapshot of the current PRCMU firmware API as it looks right now. The PRCMU firmware is still subject to change. This also updates the CPUfreq driver to a newer version that will utilize the new API. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Sebastien Rault <sebastien.rault@stericsson.com> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1890 lines
49 KiB
C
1890 lines
49 KiB
C
/*
|
|
* Copyright (C) STMicroelectronics 2009
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License v2
|
|
* Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
|
|
* Author: Sundar Iyer <sundar.iyer@stericsson.com>
|
|
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
|
|
*
|
|
* U8500 PRCM Unit interface driver
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/db8500-prcmu.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/db8500-regs.h>
|
|
#include <mach/id.h>
|
|
#include "db8500-prcmu-regs.h"
|
|
|
|
/* Offset for the firmware version within the TCPM */
|
|
#define PRCMU_FW_VERSION_OFFSET 0xA4
|
|
|
|
/* PRCMU project numbers, defined by PRCMU FW */
|
|
#define PRCMU_PROJECT_ID_8500V1_0 1
|
|
#define PRCMU_PROJECT_ID_8500V2_0 2
|
|
#define PRCMU_PROJECT_ID_8400V2_0 3
|
|
|
|
/* Index of different voltages to be used when accessing AVSData */
|
|
#define PRCM_AVS_BASE 0x2FC
|
|
#define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0)
|
|
#define PRCM_AVS_VBB_MAX_OPP (PRCM_AVS_BASE + 0x1)
|
|
#define PRCM_AVS_VBB_100_OPP (PRCM_AVS_BASE + 0x2)
|
|
#define PRCM_AVS_VBB_50_OPP (PRCM_AVS_BASE + 0x3)
|
|
#define PRCM_AVS_VARM_MAX_OPP (PRCM_AVS_BASE + 0x4)
|
|
#define PRCM_AVS_VARM_100_OPP (PRCM_AVS_BASE + 0x5)
|
|
#define PRCM_AVS_VARM_50_OPP (PRCM_AVS_BASE + 0x6)
|
|
#define PRCM_AVS_VARM_RET (PRCM_AVS_BASE + 0x7)
|
|
#define PRCM_AVS_VAPE_100_OPP (PRCM_AVS_BASE + 0x8)
|
|
#define PRCM_AVS_VAPE_50_OPP (PRCM_AVS_BASE + 0x9)
|
|
#define PRCM_AVS_VMOD_100_OPP (PRCM_AVS_BASE + 0xA)
|
|
#define PRCM_AVS_VMOD_50_OPP (PRCM_AVS_BASE + 0xB)
|
|
#define PRCM_AVS_VSAFE (PRCM_AVS_BASE + 0xC)
|
|
|
|
#define PRCM_AVS_VOLTAGE 0
|
|
#define PRCM_AVS_VOLTAGE_MASK 0x3f
|
|
#define PRCM_AVS_ISSLOWSTARTUP 6
|
|
#define PRCM_AVS_ISSLOWSTARTUP_MASK (1 << PRCM_AVS_ISSLOWSTARTUP)
|
|
#define PRCM_AVS_ISMODEENABLE 7
|
|
#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE)
|
|
|
|
#define PRCM_BOOT_STATUS 0xFFF
|
|
#define PRCM_ROMCODE_A2P 0xFFE
|
|
#define PRCM_ROMCODE_P2A 0xFFD
|
|
#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */
|
|
|
|
#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
|
|
|
|
#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */
|
|
#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0)
|
|
#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1)
|
|
#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2)
|
|
#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3)
|
|
#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4)
|
|
#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5)
|
|
#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8)
|
|
|
|
/* Req Mailboxes */
|
|
#define PRCM_REQ_MB0 0xFDC /* 12 bytes */
|
|
#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */
|
|
#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */
|
|
#define PRCM_REQ_MB3 0xE4C /* 372 bytes */
|
|
#define PRCM_REQ_MB4 0xE48 /* 4 bytes */
|
|
#define PRCM_REQ_MB5 0xE44 /* 4 bytes */
|
|
|
|
/* Ack Mailboxes */
|
|
#define PRCM_ACK_MB0 0xE08 /* 52 bytes */
|
|
#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
|
|
#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
|
|
#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
|
|
#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
|
|
#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
|
|
|
|
/* Mailbox 0 headers */
|
|
#define MB0H_POWER_STATE_TRANS 0
|
|
#define MB0H_CONFIG_WAKEUPS_EXE 1
|
|
#define MB0H_READ_WAKEUP_ACK 3
|
|
#define MB0H_CONFIG_WAKEUPS_SLEEP 4
|
|
|
|
#define MB0H_WAKEUP_EXE 2
|
|
#define MB0H_WAKEUP_SLEEP 5
|
|
|
|
/* Mailbox 0 REQs */
|
|
#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0)
|
|
#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1)
|
|
#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2)
|
|
#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3)
|
|
#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4)
|
|
#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8)
|
|
|
|
/* Mailbox 0 ACKs */
|
|
#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0)
|
|
#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1)
|
|
#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4)
|
|
#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8)
|
|
#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C)
|
|
#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20)
|
|
#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20
|
|
|
|
/* Mailbox 1 headers */
|
|
#define MB1H_ARM_APE_OPP 0x0
|
|
#define MB1H_RESET_MODEM 0x2
|
|
#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
|
|
#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
|
|
#define MB1H_RELEASE_USB_WAKEUP 0x5
|
|
|
|
/* Mailbox 1 Requests */
|
|
#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
|
|
#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
|
|
#define PRCM_REQ_MB1_APE_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x4)
|
|
#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x8)
|
|
|
|
/* Mailbox 1 ACKs */
|
|
#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
|
|
#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1)
|
|
#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2)
|
|
#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3)
|
|
|
|
/* Mailbox 2 headers */
|
|
#define MB2H_DPS 0x0
|
|
#define MB2H_AUTO_PWR 0x1
|
|
|
|
/* Mailbox 2 REQs */
|
|
#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0)
|
|
#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1)
|
|
#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2)
|
|
#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3)
|
|
#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4)
|
|
#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5)
|
|
#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6)
|
|
#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7)
|
|
#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8)
|
|
#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC)
|
|
|
|
/* Mailbox 2 ACKs */
|
|
#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
|
|
#define HWACC_PWR_ST_OK 0xFE
|
|
|
|
/* Mailbox 3 headers */
|
|
#define MB3H_ANC 0x0
|
|
#define MB3H_SIDETONE 0x1
|
|
#define MB3H_SYSCLK 0xE
|
|
|
|
/* Mailbox 3 Requests */
|
|
#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0)
|
|
#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20)
|
|
#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60)
|
|
#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64)
|
|
#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68)
|
|
#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C)
|
|
#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C)
|
|
|
|
/* Mailbox 4 headers */
|
|
#define MB4H_DDR_INIT 0x0
|
|
#define MB4H_MEM_ST 0x1
|
|
#define MB4H_HOTDOG 0x12
|
|
#define MB4H_HOTMON 0x13
|
|
#define MB4H_HOT_PERIOD 0x14
|
|
|
|
/* Mailbox 4 Requests */
|
|
#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
|
|
#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1)
|
|
#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3)
|
|
#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0)
|
|
#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0)
|
|
#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1)
|
|
#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2)
|
|
#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
|
|
#define HOTMON_CONFIG_LOW BIT(0)
|
|
#define HOTMON_CONFIG_HIGH BIT(1)
|
|
|
|
/* Mailbox 5 Requests */
|
|
#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
|
|
#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1)
|
|
#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2)
|
|
#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3)
|
|
#define PRCMU_I2C_WRITE(slave) \
|
|
(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
|
|
#define PRCMU_I2C_READ(slave) \
|
|
(((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
|
|
#define PRCMU_I2C_STOP_EN BIT(3)
|
|
|
|
/* Mailbox 5 ACKs */
|
|
#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1)
|
|
#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3)
|
|
#define I2C_WR_OK 0x1
|
|
#define I2C_RD_OK 0x2
|
|
|
|
#define NUM_MB 8
|
|
#define MBOX_BIT BIT
|
|
#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
|
|
|
|
/*
|
|
* Wakeups/IRQs
|
|
*/
|
|
|
|
#define WAKEUP_BIT_RTC BIT(0)
|
|
#define WAKEUP_BIT_RTT0 BIT(1)
|
|
#define WAKEUP_BIT_RTT1 BIT(2)
|
|
#define WAKEUP_BIT_HSI0 BIT(3)
|
|
#define WAKEUP_BIT_HSI1 BIT(4)
|
|
#define WAKEUP_BIT_CA_WAKE BIT(5)
|
|
#define WAKEUP_BIT_USB BIT(6)
|
|
#define WAKEUP_BIT_ABB BIT(7)
|
|
#define WAKEUP_BIT_ABB_FIFO BIT(8)
|
|
#define WAKEUP_BIT_SYSCLK_OK BIT(9)
|
|
#define WAKEUP_BIT_CA_SLEEP BIT(10)
|
|
#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
|
|
#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
|
|
#define WAKEUP_BIT_ANC_OK BIT(13)
|
|
#define WAKEUP_BIT_SW_ERROR BIT(14)
|
|
#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
|
|
#define WAKEUP_BIT_ARM BIT(17)
|
|
#define WAKEUP_BIT_HOTMON_LOW BIT(18)
|
|
#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
|
|
#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
|
|
#define WAKEUP_BIT_GPIO0 BIT(23)
|
|
#define WAKEUP_BIT_GPIO1 BIT(24)
|
|
#define WAKEUP_BIT_GPIO2 BIT(25)
|
|
#define WAKEUP_BIT_GPIO3 BIT(26)
|
|
#define WAKEUP_BIT_GPIO4 BIT(27)
|
|
#define WAKEUP_BIT_GPIO5 BIT(28)
|
|
#define WAKEUP_BIT_GPIO6 BIT(29)
|
|
#define WAKEUP_BIT_GPIO7 BIT(30)
|
|
#define WAKEUP_BIT_GPIO8 BIT(31)
|
|
|
|
/*
|
|
* This vector maps irq numbers to the bits in the bit field used in
|
|
* communication with the PRCMU firmware.
|
|
*
|
|
* The reason for having this is to keep the irq numbers contiguous even though
|
|
* the bits in the bit field are not. (The bits also have a tendency to move
|
|
* around, to further complicate matters.)
|
|
*/
|
|
#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE)
|
|
#define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
|
|
static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
|
|
IRQ_ENTRY(RTC),
|
|
IRQ_ENTRY(RTT0),
|
|
IRQ_ENTRY(RTT1),
|
|
IRQ_ENTRY(HSI0),
|
|
IRQ_ENTRY(HSI1),
|
|
IRQ_ENTRY(CA_WAKE),
|
|
IRQ_ENTRY(USB),
|
|
IRQ_ENTRY(ABB),
|
|
IRQ_ENTRY(ABB_FIFO),
|
|
IRQ_ENTRY(CA_SLEEP),
|
|
IRQ_ENTRY(ARM),
|
|
IRQ_ENTRY(HOTMON_LOW),
|
|
IRQ_ENTRY(HOTMON_HIGH),
|
|
IRQ_ENTRY(MODEM_SW_RESET_REQ),
|
|
IRQ_ENTRY(GPIO0),
|
|
IRQ_ENTRY(GPIO1),
|
|
IRQ_ENTRY(GPIO2),
|
|
IRQ_ENTRY(GPIO3),
|
|
IRQ_ENTRY(GPIO4),
|
|
IRQ_ENTRY(GPIO5),
|
|
IRQ_ENTRY(GPIO6),
|
|
IRQ_ENTRY(GPIO7),
|
|
IRQ_ENTRY(GPIO8)
|
|
};
|
|
|
|
#define VALID_WAKEUPS (BIT(NUM_PRCMU_WAKEUP_INDICES) - 1)
|
|
#define WAKEUP_ENTRY(_name)[PRCMU_WAKEUP_INDEX_##_name] = (WAKEUP_BIT_##_name)
|
|
static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
|
|
WAKEUP_ENTRY(RTC),
|
|
WAKEUP_ENTRY(RTT0),
|
|
WAKEUP_ENTRY(RTT1),
|
|
WAKEUP_ENTRY(HSI0),
|
|
WAKEUP_ENTRY(HSI1),
|
|
WAKEUP_ENTRY(USB),
|
|
WAKEUP_ENTRY(ABB),
|
|
WAKEUP_ENTRY(ABB_FIFO),
|
|
WAKEUP_ENTRY(ARM)
|
|
};
|
|
|
|
/*
|
|
* mb0_transfer - state needed for mailbox 0 communication.
|
|
* @lock: The transaction lock.
|
|
* @dbb_events_lock: A lock used to handle concurrent access to (parts of)
|
|
* the request data.
|
|
* @mask_work: Work structure used for (un)masking wakeup interrupts.
|
|
* @req: Request data that need to persist between requests.
|
|
*/
|
|
static struct {
|
|
spinlock_t lock;
|
|
spinlock_t dbb_irqs_lock;
|
|
struct work_struct mask_work;
|
|
struct mutex ac_wake_lock;
|
|
struct completion ac_wake_work;
|
|
struct {
|
|
u32 dbb_irqs;
|
|
u32 dbb_wakeups;
|
|
u32 abb_events;
|
|
} req;
|
|
} mb0_transfer;
|
|
|
|
/*
|
|
* mb1_transfer - state needed for mailbox 1 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
* @ack: Reply ("acknowledge") data.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
struct {
|
|
u8 header;
|
|
u8 arm_opp;
|
|
u8 ape_opp;
|
|
u8 ape_voltage_status;
|
|
} ack;
|
|
} mb1_transfer;
|
|
|
|
/*
|
|
* mb2_transfer - state needed for mailbox 2 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
* @auto_pm_lock: The autonomous power management configuration lock.
|
|
* @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
|
|
* @req: Request data that need to persist between requests.
|
|
* @ack: Reply ("acknowledge") data.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
spinlock_t auto_pm_lock;
|
|
bool auto_pm_enabled;
|
|
struct {
|
|
u8 status;
|
|
} ack;
|
|
} mb2_transfer;
|
|
|
|
/*
|
|
* mb3_transfer - state needed for mailbox 3 communication.
|
|
* @lock: The request lock.
|
|
* @sysclk_lock: A lock used to handle concurrent sysclk requests.
|
|
* @sysclk_work: Work structure used for sysclk requests.
|
|
*/
|
|
static struct {
|
|
spinlock_t lock;
|
|
struct mutex sysclk_lock;
|
|
struct completion sysclk_work;
|
|
} mb3_transfer;
|
|
|
|
/*
|
|
* mb4_transfer - state needed for mailbox 4 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
} mb4_transfer;
|
|
|
|
/*
|
|
* mb5_transfer - state needed for mailbox 5 communication.
|
|
* @lock: The transaction lock.
|
|
* @work: The transaction completion structure.
|
|
* @ack: Reply ("acknowledge") data.
|
|
*/
|
|
static struct {
|
|
struct mutex lock;
|
|
struct completion work;
|
|
struct {
|
|
u8 status;
|
|
u8 value;
|
|
} ack;
|
|
} mb5_transfer;
|
|
|
|
static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
|
|
|
|
/* Spinlocks */
|
|
static DEFINE_SPINLOCK(clkout_lock);
|
|
static DEFINE_SPINLOCK(gpiocr_lock);
|
|
|
|
/* Global var to runtime determine TCDM base for v2 or v1 */
|
|
static __iomem void *tcdm_base;
|
|
|
|
struct clk_mgt {
|
|
unsigned int offset;
|
|
u32 pllsw;
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(clk_mgt_lock);
|
|
|
|
#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
|
|
struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
|
|
CLK_MGT_ENTRY(SGACLK),
|
|
CLK_MGT_ENTRY(UARTCLK),
|
|
CLK_MGT_ENTRY(MSP02CLK),
|
|
CLK_MGT_ENTRY(MSP1CLK),
|
|
CLK_MGT_ENTRY(I2CCLK),
|
|
CLK_MGT_ENTRY(SDMMCCLK),
|
|
CLK_MGT_ENTRY(SLIMCLK),
|
|
CLK_MGT_ENTRY(PER1CLK),
|
|
CLK_MGT_ENTRY(PER2CLK),
|
|
CLK_MGT_ENTRY(PER3CLK),
|
|
CLK_MGT_ENTRY(PER5CLK),
|
|
CLK_MGT_ENTRY(PER6CLK),
|
|
CLK_MGT_ENTRY(PER7CLK),
|
|
CLK_MGT_ENTRY(LCDCLK),
|
|
CLK_MGT_ENTRY(BMLCLK),
|
|
CLK_MGT_ENTRY(HSITXCLK),
|
|
CLK_MGT_ENTRY(HSIRXCLK),
|
|
CLK_MGT_ENTRY(HDMICLK),
|
|
CLK_MGT_ENTRY(APEATCLK),
|
|
CLK_MGT_ENTRY(APETRACECLK),
|
|
CLK_MGT_ENTRY(MCDECLK),
|
|
CLK_MGT_ENTRY(IPI2CCLK),
|
|
CLK_MGT_ENTRY(DSIALTCLK),
|
|
CLK_MGT_ENTRY(DMACLK),
|
|
CLK_MGT_ENTRY(B2R2CLK),
|
|
CLK_MGT_ENTRY(TVCLK),
|
|
CLK_MGT_ENTRY(SSPCLK),
|
|
CLK_MGT_ENTRY(RNGCLK),
|
|
CLK_MGT_ENTRY(UICCCLK),
|
|
};
|
|
|
|
/*
|
|
* Used by MCDE to setup all necessary PRCMU registers
|
|
*/
|
|
#define PRCMU_RESET_DSIPLL 0x00004000
|
|
#define PRCMU_UNCLAMP_DSIPLL 0x00400800
|
|
|
|
#define PRCMU_CLK_PLL_DIV_SHIFT 0
|
|
#define PRCMU_CLK_PLL_SW_SHIFT 5
|
|
#define PRCMU_CLK_38 (1 << 9)
|
|
#define PRCMU_CLK_38_SRC (1 << 10)
|
|
#define PRCMU_CLK_38_DIV (1 << 11)
|
|
|
|
/* PLLDIV=12, PLLSW=4 (PLLDDR) */
|
|
#define PRCMU_DSI_CLOCK_SETTING 0x0000008C
|
|
|
|
/* PLLDIV=8, PLLSW=4 (PLLDDR) */
|
|
#define PRCMU_DSI_CLOCK_SETTING_U8400 0x00000088
|
|
|
|
/* DPI 50000000 Hz */
|
|
#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
|
|
(16 << PRCMU_CLK_PLL_DIV_SHIFT))
|
|
#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00
|
|
|
|
/* D=101, N=1, R=4, SELDIV2=0 */
|
|
#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165
|
|
|
|
/* D=70, N=1, R=3, SELDIV2=0 */
|
|
#define PRCMU_PLLDSI_FREQ_SETTING_U8400 0x00030146
|
|
|
|
#define PRCMU_ENABLE_PLLDSI 0x00000001
|
|
#define PRCMU_DISABLE_PLLDSI 0x00000000
|
|
#define PRCMU_RELEASE_RESET_DSS 0x0000400C
|
|
#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202
|
|
/* ESC clk, div0=1, div1=1, div2=3 */
|
|
#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101
|
|
#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101
|
|
#define PRCMU_DSI_RESET_SW 0x00000007
|
|
|
|
#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
|
|
|
|
static struct {
|
|
u8 project_number;
|
|
u8 api_version;
|
|
u8 func_version;
|
|
u8 errata;
|
|
} prcmu_version;
|
|
|
|
|
|
int prcmu_enable_dsipll(void)
|
|
{
|
|
int i;
|
|
unsigned int plldsifreq;
|
|
|
|
/* Clear DSIPLL_RESETN */
|
|
writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
|
|
/* Unclamp DSIPLL in/out */
|
|
writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
|
|
|
|
if (prcmu_is_u8400())
|
|
plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
|
|
else
|
|
plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
|
|
/* Set DSI PLL FREQ */
|
|
writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
|
|
writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
|
|
(_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
|
|
/* Enable Escape clocks */
|
|
writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
|
|
(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
|
|
|
|
/* Start DSI PLL */
|
|
writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
|
|
/* Reset DSI PLL */
|
|
writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
|
|
for (i = 0; i < 10; i++) {
|
|
if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
|
|
PRCMU_PLLDSI_LOCKP_LOCKED)
|
|
== PRCMU_PLLDSI_LOCKP_LOCKED)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
/* Set DSIPLL_RESETN */
|
|
writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
|
|
return 0;
|
|
}
|
|
|
|
int prcmu_disable_dsipll(void)
|
|
{
|
|
/* Disable dsi pll */
|
|
writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
|
|
/* Disable escapeclock */
|
|
writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
|
|
(_PRCMU_BASE + PRCM_DSITVCLK_DIV));
|
|
return 0;
|
|
}
|
|
|
|
int prcmu_set_display_clocks(void)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int dsiclk;
|
|
|
|
if (prcmu_is_u8400())
|
|
dsiclk = PRCMU_DSI_CLOCK_SETTING_U8400;
|
|
else
|
|
dsiclk = PRCMU_DSI_CLOCK_SETTING;
|
|
|
|
spin_lock_irqsave(&clk_mgt_lock, flags);
|
|
|
|
/* Grab the HW semaphore. */
|
|
while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
|
|
cpu_relax();
|
|
|
|
writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
|
|
writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
|
|
writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
|
|
|
|
/* Release the HW semaphore. */
|
|
writel(0, (_PRCMU_BASE + PRCM_SEM));
|
|
|
|
spin_unlock_irqrestore(&clk_mgt_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
|
|
*/
|
|
void prcmu_enable_spi2(void)
|
|
{
|
|
u32 reg;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpiocr_lock, flags);
|
|
reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
|
|
writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
|
|
spin_unlock_irqrestore(&gpiocr_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
|
|
*/
|
|
void prcmu_disable_spi2(void)
|
|
{
|
|
u32 reg;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpiocr_lock, flags);
|
|
reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
|
|
writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
|
|
spin_unlock_irqrestore(&gpiocr_lock, flags);
|
|
}
|
|
|
|
bool prcmu_has_arm_maxopp(void)
|
|
{
|
|
return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) &
|
|
PRCM_AVS_ISMODEENABLE_MASK) == PRCM_AVS_ISMODEENABLE_MASK;
|
|
}
|
|
|
|
bool prcmu_is_u8400(void)
|
|
{
|
|
return prcmu_version.project_number == PRCMU_PROJECT_ID_8400V2_0;
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_boot_status - PRCMU boot status checking
|
|
* Returns: the current PRCMU boot status
|
|
*/
|
|
int prcmu_get_boot_status(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_BOOT_STATUS);
|
|
}
|
|
|
|
/**
|
|
* prcmu_set_rc_a2p - This function is used to run few power state sequences
|
|
* @val: Value to be set, i.e. transition requested
|
|
* Returns: 0 on success, -EINVAL on invalid argument
|
|
*
|
|
* This function is used to run the following power state sequences -
|
|
* any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
|
|
*/
|
|
int prcmu_set_rc_a2p(enum romcode_write val)
|
|
{
|
|
if (val < RDY_2_DS || val > RDY_2_XP70_RST)
|
|
return -EINVAL;
|
|
writeb(val, (tcdm_base + PRCM_ROMCODE_A2P));
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_rc_p2a - This function is used to get power state sequences
|
|
* Returns: the power transition that has last happened
|
|
*
|
|
* This function can return the following transitions-
|
|
* any state to ApReset, ApDeepSleep to ApExecute, ApExecute to ApDeepSleep
|
|
*/
|
|
enum romcode_read prcmu_get_rc_p2a(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_ROMCODE_P2A);
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_current_mode - Return the current XP70 power mode
|
|
* Returns: Returns the current AP(ARM) power mode: init,
|
|
* apBoot, apExecute, apDeepSleep, apSleep, apIdle, apReset
|
|
*/
|
|
enum ap_pwrst prcmu_get_xp70_current_state(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_XP70_CUR_PWR_STATE);
|
|
}
|
|
|
|
/**
|
|
* prcmu_config_clkout - Configure one of the programmable clock outputs.
|
|
* @clkout: The CLKOUT number (0 or 1).
|
|
* @source: The clock to be used (one of the PRCMU_CLKSRC_*).
|
|
* @div: The divider to be applied.
|
|
*
|
|
* Configures one of the programmable clock outputs (CLKOUTs).
|
|
* @div should be in the range [1,63] to request a configuration, or 0 to
|
|
* inform that the configuration is no longer requested.
|
|
*/
|
|
int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
|
|
{
|
|
static int requests[2];
|
|
int r = 0;
|
|
unsigned long flags;
|
|
u32 val;
|
|
u32 bits;
|
|
u32 mask;
|
|
u32 div_mask;
|
|
|
|
BUG_ON(clkout > 1);
|
|
BUG_ON(div > 63);
|
|
BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
|
|
|
|
if (!div && !requests[clkout])
|
|
return -EINVAL;
|
|
|
|
switch (clkout) {
|
|
case 0:
|
|
div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
|
|
mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
|
|
bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
|
|
(div << PRCM_CLKOCR_CLKODIV0_SHIFT));
|
|
break;
|
|
case 1:
|
|
div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
|
|
mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
|
|
PRCM_CLKOCR_CLK1TYPE);
|
|
bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
|
|
(div << PRCM_CLKOCR_CLKODIV1_SHIFT));
|
|
break;
|
|
}
|
|
bits &= mask;
|
|
|
|
spin_lock_irqsave(&clkout_lock, flags);
|
|
|
|
val = readl(_PRCMU_BASE + PRCM_CLKOCR);
|
|
if (val & div_mask) {
|
|
if (div) {
|
|
if ((val & mask) != bits) {
|
|
r = -EBUSY;
|
|
goto unlock_and_return;
|
|
}
|
|
} else {
|
|
if ((val & mask & ~div_mask) != bits) {
|
|
r = -EINVAL;
|
|
goto unlock_and_return;
|
|
}
|
|
}
|
|
}
|
|
writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
|
|
requests[clkout] += (div ? 1 : -1);
|
|
|
|
unlock_and_return:
|
|
spin_unlock_irqrestore(&clkout_lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
|
|
{
|
|
unsigned long flags;
|
|
|
|
BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
|
|
cpu_relax();
|
|
|
|
writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
|
|
writeb(state, (tcdm_base + PRCM_REQ_MB0_AP_POWER_STATE));
|
|
writeb((keep_ap_pll ? 1 : 0), (tcdm_base + PRCM_REQ_MB0_AP_PLL_STATE));
|
|
writeb((keep_ulp_clk ? 1 : 0),
|
|
(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
|
|
writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
|
|
writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function should only be called while mb0_transfer.lock is held. */
|
|
static void config_wakeups(void)
|
|
{
|
|
const u8 header[2] = {
|
|
MB0H_CONFIG_WAKEUPS_EXE,
|
|
MB0H_CONFIG_WAKEUPS_SLEEP
|
|
};
|
|
static u32 last_dbb_events;
|
|
static u32 last_abb_events;
|
|
u32 dbb_events;
|
|
u32 abb_events;
|
|
unsigned int i;
|
|
|
|
dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
|
|
dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
|
|
|
|
abb_events = mb0_transfer.req.abb_events;
|
|
|
|
if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
|
|
return;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
|
|
cpu_relax();
|
|
writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
|
|
writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
|
|
writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
|
|
writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
}
|
|
last_dbb_events = dbb_events;
|
|
last_abb_events = abb_events;
|
|
}
|
|
|
|
void prcmu_enable_wakeups(u32 wakeups)
|
|
{
|
|
unsigned long flags;
|
|
u32 bits;
|
|
int i;
|
|
|
|
BUG_ON(wakeups != (wakeups & VALID_WAKEUPS));
|
|
|
|
for (i = 0, bits = 0; i < NUM_PRCMU_WAKEUP_INDICES; i++) {
|
|
if (wakeups & BIT(i))
|
|
bits |= prcmu_wakeup_bit[i];
|
|
}
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
mb0_transfer.req.dbb_wakeups = bits;
|
|
config_wakeups();
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
void prcmu_config_abb_event_readout(u32 abb_events)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
mb0_transfer.req.abb_events = abb_events;
|
|
config_wakeups();
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
void prcmu_get_abb_event_buffer(void __iomem **buf)
|
|
{
|
|
if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
|
|
*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
|
|
else
|
|
*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_0_4500);
|
|
}
|
|
|
|
/**
|
|
* prcmu_set_arm_opp - set the appropriate ARM OPP
|
|
* @opp: The new ARM operating point to which transition is to be made
|
|
* Returns: 0 on success, non-zero on failure
|
|
*
|
|
* This function sets the the operating point of the ARM.
|
|
*/
|
|
int prcmu_set_arm_opp(u8 opp)
|
|
{
|
|
int r;
|
|
|
|
if (opp < ARM_NO_CHANGE || opp > ARM_EXTCLK)
|
|
return -EINVAL;
|
|
|
|
r = 0;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
|
|
writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
|
|
|
|
writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
|
|
(mb1_transfer.ack.arm_opp != opp))
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_arm_opp - get the current ARM OPP
|
|
*
|
|
* Returns: the current ARM OPP
|
|
*/
|
|
int prcmu_get_arm_opp(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_ddr_opp - get the current DDR OPP
|
|
*
|
|
* Returns: the current DDR OPP
|
|
*/
|
|
int prcmu_get_ddr_opp(void)
|
|
{
|
|
return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
|
|
}
|
|
|
|
/**
|
|
* set_ddr_opp - set the appropriate DDR OPP
|
|
* @opp: The new DDR operating point to which transition is to be made
|
|
* Returns: 0 on success, non-zero on failure
|
|
*
|
|
* This function sets the operating point of the DDR.
|
|
*/
|
|
int prcmu_set_ddr_opp(u8 opp)
|
|
{
|
|
if (opp < DDR_100_OPP || opp > DDR_25_OPP)
|
|
return -EINVAL;
|
|
/* Changing the DDR OPP can hang the hardware pre-v21 */
|
|
if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
|
|
writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
|
|
|
|
return 0;
|
|
}
|
|
/**
|
|
* set_ape_opp - set the appropriate APE OPP
|
|
* @opp: The new APE operating point to which transition is to be made
|
|
* Returns: 0 on success, non-zero on failure
|
|
*
|
|
* This function sets the operating point of the APE.
|
|
*/
|
|
int prcmu_set_ape_opp(u8 opp)
|
|
{
|
|
int r = 0;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
|
|
writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
|
|
|
|
writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
|
|
(mb1_transfer.ack.ape_opp != opp))
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_get_ape_opp - get the current APE OPP
|
|
*
|
|
* Returns: the current APE OPP
|
|
*/
|
|
int prcmu_get_ape_opp(void)
|
|
{
|
|
return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_APE_OPP);
|
|
}
|
|
|
|
/**
|
|
* prcmu_request_ape_opp_100_voltage - Request APE OPP 100% voltage
|
|
* @enable: true to request the higher voltage, false to drop a request.
|
|
*
|
|
* Calls to this function to enable and disable requests must be balanced.
|
|
*/
|
|
int prcmu_request_ape_opp_100_voltage(bool enable)
|
|
{
|
|
int r = 0;
|
|
u8 header;
|
|
static unsigned int requests;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
if (enable) {
|
|
if (0 != requests++)
|
|
goto unlock_and_return;
|
|
header = MB1H_REQUEST_APE_OPP_100_VOLT;
|
|
} else {
|
|
if (requests == 0) {
|
|
r = -EIO;
|
|
goto unlock_and_return;
|
|
} else if (1 != requests--) {
|
|
goto unlock_and_return;
|
|
}
|
|
header = MB1H_RELEASE_APE_OPP_100_VOLT;
|
|
}
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
|
|
writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != header) ||
|
|
((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
|
|
r = -EIO;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_release_usb_wakeup_state - release the state required by a USB wakeup
|
|
*
|
|
* This function releases the power state requirements of a USB wakeup.
|
|
*/
|
|
int prcmu_release_usb_wakeup_state(void)
|
|
{
|
|
int r = 0;
|
|
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_RELEASE_USB_WAKEUP,
|
|
(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
|
|
writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
|
|
((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
|
|
r = -EIO;
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_set_epod - set the state of a EPOD (power domain)
|
|
* @epod_id: The EPOD to set
|
|
* @epod_state: The new EPOD state
|
|
*
|
|
* This function sets the state of a EPOD (power domain). It may not be called
|
|
* from interrupt context.
|
|
*/
|
|
int prcmu_set_epod(u16 epod_id, u8 epod_state)
|
|
{
|
|
int r = 0;
|
|
bool ram_retention = false;
|
|
int i;
|
|
|
|
/* check argument */
|
|
BUG_ON(epod_id >= NUM_EPOD_ID);
|
|
|
|
/* set flag if retention is possible */
|
|
switch (epod_id) {
|
|
case EPOD_ID_SVAMMDSP:
|
|
case EPOD_ID_SIAMMDSP:
|
|
case EPOD_ID_ESRAM12:
|
|
case EPOD_ID_ESRAM34:
|
|
ram_retention = true;
|
|
break;
|
|
}
|
|
|
|
/* check argument */
|
|
BUG_ON(epod_state > EPOD_STATE_ON);
|
|
BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention);
|
|
|
|
/* get lock */
|
|
mutex_lock(&mb2_transfer.lock);
|
|
|
|
/* wait for mailbox */
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
|
|
cpu_relax();
|
|
|
|
/* fill in mailbox */
|
|
for (i = 0; i < NUM_EPOD_ID; i++)
|
|
writeb(EPOD_STATE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB2 + i));
|
|
writeb(epod_state, (tcdm_base + PRCM_REQ_MB2 + epod_id));
|
|
|
|
writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
|
|
|
|
writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
|
|
/*
|
|
* The current firmware version does not handle errors correctly,
|
|
* and we cannot recover if there is an error.
|
|
* This is expected to change when the firmware is updated.
|
|
*/
|
|
if (!wait_for_completion_timeout(&mb2_transfer.work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
if (mb2_transfer.ack.status != HWACC_PWR_ST_OK)
|
|
r = -EIO;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb2_transfer.lock);
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_configure_auto_pm - Configure autonomous power management.
|
|
* @sleep: Configuration for ApSleep.
|
|
* @idle: Configuration for ApIdle.
|
|
*/
|
|
void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
|
|
struct prcmu_auto_pm_config *idle)
|
|
{
|
|
u32 sleep_cfg;
|
|
u32 idle_cfg;
|
|
unsigned long flags;
|
|
|
|
BUG_ON((sleep == NULL) || (idle == NULL));
|
|
|
|
sleep_cfg = (sleep->sva_auto_pm_enable & 0xF);
|
|
sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_auto_pm_enable & 0xF));
|
|
sleep_cfg = ((sleep_cfg << 8) | (sleep->sva_power_on & 0xFF));
|
|
sleep_cfg = ((sleep_cfg << 8) | (sleep->sia_power_on & 0xFF));
|
|
sleep_cfg = ((sleep_cfg << 4) | (sleep->sva_policy & 0xF));
|
|
sleep_cfg = ((sleep_cfg << 4) | (sleep->sia_policy & 0xF));
|
|
|
|
idle_cfg = (idle->sva_auto_pm_enable & 0xF);
|
|
idle_cfg = ((idle_cfg << 4) | (idle->sia_auto_pm_enable & 0xF));
|
|
idle_cfg = ((idle_cfg << 8) | (idle->sva_power_on & 0xFF));
|
|
idle_cfg = ((idle_cfg << 8) | (idle->sia_power_on & 0xFF));
|
|
idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF));
|
|
idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF));
|
|
|
|
spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags);
|
|
|
|
/*
|
|
* The autonomous power management configuration is done through
|
|
* fields in mailbox 2, but these fields are only used as shared
|
|
* variables - i.e. there is no need to send a message.
|
|
*/
|
|
writel(sleep_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_SLEEP));
|
|
writel(idle_cfg, (tcdm_base + PRCM_REQ_MB2_AUTO_PM_IDLE));
|
|
|
|
mb2_transfer.auto_pm_enabled =
|
|
((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
|
|
(sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
|
|
(idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
|
|
(idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON));
|
|
|
|
spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags);
|
|
}
|
|
EXPORT_SYMBOL(prcmu_configure_auto_pm);
|
|
|
|
bool prcmu_is_auto_pm_enabled(void)
|
|
{
|
|
return mb2_transfer.auto_pm_enabled;
|
|
}
|
|
|
|
static int request_sysclk(bool enable)
|
|
{
|
|
int r;
|
|
unsigned long flags;
|
|
|
|
r = 0;
|
|
|
|
mutex_lock(&mb3_transfer.sysclk_lock);
|
|
|
|
spin_lock_irqsave(&mb3_transfer.lock, flags);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
|
|
cpu_relax();
|
|
|
|
writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
|
|
|
|
writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
|
|
writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
|
|
spin_unlock_irqrestore(&mb3_transfer.lock, flags);
|
|
|
|
/*
|
|
* The firmware only sends an ACK if we want to enable the
|
|
* SysClk, and it succeeds.
|
|
*/
|
|
if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
}
|
|
|
|
mutex_unlock(&mb3_transfer.sysclk_lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int request_timclk(bool enable)
|
|
{
|
|
u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK);
|
|
|
|
if (!enable)
|
|
val |= PRCM_TCR_STOP_TIMERS;
|
|
writel(val, (_PRCMU_BASE + PRCM_TCR));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int request_reg_clock(u8 clock, bool enable)
|
|
{
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&clk_mgt_lock, flags);
|
|
|
|
/* Grab the HW semaphore. */
|
|
while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
|
|
cpu_relax();
|
|
|
|
val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
|
|
if (enable) {
|
|
val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
|
|
} else {
|
|
clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
|
|
val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
|
|
}
|
|
writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
|
|
|
|
/* Release the HW semaphore. */
|
|
writel(0, (_PRCMU_BASE + PRCM_SEM));
|
|
|
|
spin_unlock_irqrestore(&clk_mgt_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* prcmu_request_clock() - Request for a clock to be enabled or disabled.
|
|
* @clock: The clock for which the request is made.
|
|
* @enable: Whether the clock should be enabled (true) or disabled (false).
|
|
*
|
|
* This function should only be used by the clock implementation.
|
|
* Do not use it from any other place!
|
|
*/
|
|
int prcmu_request_clock(u8 clock, bool enable)
|
|
{
|
|
if (clock < PRCMU_NUM_REG_CLOCKS)
|
|
return request_reg_clock(clock, enable);
|
|
else if (clock == PRCMU_TIMCLK)
|
|
return request_timclk(enable);
|
|
else if (clock == PRCMU_SYSCLK)
|
|
return request_sysclk(enable);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
int prcmu_config_esram0_deep_sleep(u8 state)
|
|
{
|
|
if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
|
|
(state < ESRAM0_DEEP_SLEEP_STATE_OFF))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
writeb(((DDR_PWR_STATE_OFFHIGHLAT << 4) | DDR_PWR_STATE_ON),
|
|
(tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE));
|
|
writeb(DDR_PWR_STATE_ON,
|
|
(tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
|
|
writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
|
|
|
|
writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int prcmu_config_hotdog(u8 threshold)
|
|
{
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
|
|
writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
|
|
writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int prcmu_config_hotmon(u8 low, u8 high)
|
|
{
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
|
|
writeb(high, (tcdm_base + PRCM_REQ_MB4_HOTMON_HIGH));
|
|
writeb((HOTMON_CONFIG_LOW | HOTMON_CONFIG_HIGH),
|
|
(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
|
|
writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
|
|
writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int config_hot_period(u16 val)
|
|
{
|
|
mutex_lock(&mb4_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
|
|
cpu_relax();
|
|
|
|
writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
|
|
writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
|
|
|
|
writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb4_transfer.work);
|
|
|
|
mutex_unlock(&mb4_transfer.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int prcmu_start_temp_sense(u16 cycles32k)
|
|
{
|
|
if (cycles32k == 0xFFFF)
|
|
return -EINVAL;
|
|
|
|
return config_hot_period(cycles32k);
|
|
}
|
|
|
|
int prcmu_stop_temp_sense(void)
|
|
{
|
|
return config_hot_period(0xFFFF);
|
|
}
|
|
|
|
/**
|
|
* prcmu_set_clock_divider() - Configure the clock divider.
|
|
* @clock: The clock for which the request is made.
|
|
* @divider: The clock divider. (< 32)
|
|
*
|
|
* This function should only be used by the clock implementation.
|
|
* Do not use it from any other place!
|
|
*/
|
|
int prcmu_set_clock_divider(u8 clock, u8 divider)
|
|
{
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&clk_mgt_lock, flags);
|
|
|
|
/* Grab the HW semaphore. */
|
|
while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
|
|
cpu_relax();
|
|
|
|
val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
|
|
val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK);
|
|
val |= (u32)divider;
|
|
writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
|
|
|
|
/* Release the HW semaphore. */
|
|
writel(0, (_PRCMU_BASE + PRCM_SEM));
|
|
|
|
spin_unlock_irqrestore(&clk_mgt_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* prcmu_abb_read() - Read register value(s) from the ABB.
|
|
* @slave: The I2C slave address.
|
|
* @reg: The (start) register address.
|
|
* @value: The read out value(s).
|
|
* @size: The number of registers to read.
|
|
*
|
|
* Reads register value(s) from the ABB.
|
|
* @size has to be 1 for the current firmware version.
|
|
*/
|
|
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
int r;
|
|
|
|
if (size != 1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb5_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
|
|
cpu_relax();
|
|
|
|
writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
|
|
writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
|
|
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
|
|
writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
|
|
|
|
writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
|
|
if (!wait_for_completion_timeout(&mb5_transfer.work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
} else {
|
|
r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
|
|
}
|
|
|
|
if (!r)
|
|
*value = mb5_transfer.ack.value;
|
|
|
|
mutex_unlock(&mb5_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_abb_write() - Write register value(s) to the ABB.
|
|
* @slave: The I2C slave address.
|
|
* @reg: The (start) register address.
|
|
* @value: The value(s) to write.
|
|
* @size: The number of registers to write.
|
|
*
|
|
* Reads register value(s) from the ABB.
|
|
* @size has to be 1 for the current firmware version.
|
|
*/
|
|
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
int r;
|
|
|
|
if (size != 1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&mb5_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
|
|
cpu_relax();
|
|
|
|
writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
|
|
writeb(PRCMU_I2C_STOP_EN, (tcdm_base + PRCM_REQ_MB5_I2C_HW_BITS));
|
|
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
|
|
writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
|
|
|
|
writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
|
|
if (!wait_for_completion_timeout(&mb5_transfer.work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
r = -EIO;
|
|
} else {
|
|
r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
|
|
}
|
|
|
|
mutex_unlock(&mb5_transfer.lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* prcmu_ac_wake_req - should be called whenever ARM wants to wakeup Modem
|
|
*/
|
|
void prcmu_ac_wake_req(void)
|
|
{
|
|
u32 val;
|
|
|
|
mutex_lock(&mb0_transfer.ac_wake_lock);
|
|
|
|
val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
|
|
if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
|
|
goto unlock_and_return;
|
|
|
|
atomic_set(&ac_wake_req_state, 1);
|
|
|
|
writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
|
|
(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
|
|
|
|
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
}
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb0_transfer.ac_wake_lock);
|
|
}
|
|
|
|
/**
|
|
* prcmu_ac_sleep_req - called when ARM no longer needs to talk to modem
|
|
*/
|
|
void prcmu_ac_sleep_req()
|
|
{
|
|
u32 val;
|
|
|
|
mutex_lock(&mb0_transfer.ac_wake_lock);
|
|
|
|
val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
|
|
if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
|
|
goto unlock_and_return;
|
|
|
|
writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
|
|
(_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
|
|
|
|
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
|
|
msecs_to_jiffies(20000))) {
|
|
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
|
|
__func__);
|
|
}
|
|
|
|
atomic_set(&ac_wake_req_state, 0);
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&mb0_transfer.ac_wake_lock);
|
|
}
|
|
|
|
bool prcmu_is_ac_wake_requested(void)
|
|
{
|
|
return (atomic_read(&ac_wake_req_state) != 0);
|
|
}
|
|
|
|
/**
|
|
* prcmu_system_reset - System reset
|
|
*
|
|
* Saves the reset reason code and then sets the APE_SOFRST register which
|
|
* fires interrupt to fw
|
|
*/
|
|
void prcmu_system_reset(u16 reset_code)
|
|
{
|
|
writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
|
|
writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
|
|
}
|
|
|
|
/**
|
|
* prcmu_reset_modem - ask the PRCMU to reset modem
|
|
*/
|
|
void prcmu_modem_reset(void)
|
|
{
|
|
mutex_lock(&mb1_transfer.lock);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
|
|
cpu_relax();
|
|
|
|
writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
|
|
writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
wait_for_completion(&mb1_transfer.work);
|
|
|
|
/*
|
|
* No need to check return from PRCMU as modem should go in reset state
|
|
* This state is already managed by upper layer
|
|
*/
|
|
|
|
mutex_unlock(&mb1_transfer.lock);
|
|
}
|
|
|
|
static void ack_dbb_wakeup(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
|
|
cpu_relax();
|
|
|
|
writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
|
|
writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
static inline void print_unknown_header_warning(u8 n, u8 header)
|
|
{
|
|
pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
|
|
header, n);
|
|
}
|
|
|
|
static bool read_mailbox_0(void)
|
|
{
|
|
bool r;
|
|
u32 ev;
|
|
unsigned int n;
|
|
u8 header;
|
|
|
|
header = readb(tcdm_base + PRCM_MBOX_HEADER_ACK_MB0);
|
|
switch (header) {
|
|
case MB0H_WAKEUP_EXE:
|
|
case MB0H_WAKEUP_SLEEP:
|
|
if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
|
|
ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_1_8500);
|
|
else
|
|
ev = readl(tcdm_base + PRCM_ACK_MB0_WAKEUP_0_8500);
|
|
|
|
if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK))
|
|
complete(&mb0_transfer.ac_wake_work);
|
|
if (ev & WAKEUP_BIT_SYSCLK_OK)
|
|
complete(&mb3_transfer.sysclk_work);
|
|
|
|
ev &= mb0_transfer.req.dbb_irqs;
|
|
|
|
for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
|
|
if (ev & prcmu_irq_bit[n])
|
|
generic_handle_irq(IRQ_PRCMU_BASE + n);
|
|
}
|
|
r = true;
|
|
break;
|
|
default:
|
|
print_unknown_header_warning(0, header);
|
|
r = false;
|
|
break;
|
|
}
|
|
writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
return r;
|
|
}
|
|
|
|
static bool read_mailbox_1(void)
|
|
{
|
|
mb1_transfer.ack.header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1);
|
|
mb1_transfer.ack.arm_opp = readb(tcdm_base +
|
|
PRCM_ACK_MB1_CURRENT_ARM_OPP);
|
|
mb1_transfer.ack.ape_opp = readb(tcdm_base +
|
|
PRCM_ACK_MB1_CURRENT_APE_OPP);
|
|
mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
|
|
PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
|
|
writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
complete(&mb1_transfer.work);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_2(void)
|
|
{
|
|
mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
|
|
writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
complete(&mb2_transfer.work);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_3(void)
|
|
{
|
|
writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_4(void)
|
|
{
|
|
u8 header;
|
|
bool do_complete = true;
|
|
|
|
header = readb(tcdm_base + PRCM_MBOX_HEADER_REQ_MB4);
|
|
switch (header) {
|
|
case MB4H_MEM_ST:
|
|
case MB4H_HOTDOG:
|
|
case MB4H_HOTMON:
|
|
case MB4H_HOT_PERIOD:
|
|
break;
|
|
default:
|
|
print_unknown_header_warning(4, header);
|
|
do_complete = false;
|
|
break;
|
|
}
|
|
|
|
writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
|
|
if (do_complete)
|
|
complete(&mb4_transfer.work);
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_5(void)
|
|
{
|
|
mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
|
|
mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
|
|
writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
complete(&mb5_transfer.work);
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_6(void)
|
|
{
|
|
writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
return false;
|
|
}
|
|
|
|
static bool read_mailbox_7(void)
|
|
{
|
|
writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
return false;
|
|
}
|
|
|
|
static bool (* const read_mailbox[NUM_MB])(void) = {
|
|
read_mailbox_0,
|
|
read_mailbox_1,
|
|
read_mailbox_2,
|
|
read_mailbox_3,
|
|
read_mailbox_4,
|
|
read_mailbox_5,
|
|
read_mailbox_6,
|
|
read_mailbox_7
|
|
};
|
|
|
|
static irqreturn_t prcmu_irq_handler(int irq, void *data)
|
|
{
|
|
u32 bits;
|
|
u8 n;
|
|
irqreturn_t r;
|
|
|
|
bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
|
|
if (unlikely(!bits))
|
|
return IRQ_NONE;
|
|
|
|
r = IRQ_HANDLED;
|
|
for (n = 0; bits; n++) {
|
|
if (bits & MBOX_BIT(n)) {
|
|
bits -= MBOX_BIT(n);
|
|
if (read_mailbox[n]())
|
|
r = IRQ_WAKE_THREAD;
|
|
}
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
|
|
{
|
|
ack_dbb_wakeup();
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void prcmu_mask_work(struct work_struct *work)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.lock, flags);
|
|
|
|
config_wakeups();
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
|
|
}
|
|
|
|
static void prcmu_irq_mask(struct irq_data *d)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
if (d->irq != IRQ_PRCMU_CA_SLEEP)
|
|
schedule_work(&mb0_transfer.mask_work);
|
|
}
|
|
|
|
static void prcmu_irq_unmask(struct irq_data *d)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
|
|
|
|
spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
|
|
|
|
if (d->irq != IRQ_PRCMU_CA_SLEEP)
|
|
schedule_work(&mb0_transfer.mask_work);
|
|
}
|
|
|
|
static void noop(struct irq_data *d)
|
|
{
|
|
}
|
|
|
|
static struct irq_chip prcmu_irq_chip = {
|
|
.name = "prcmu",
|
|
.irq_disable = prcmu_irq_mask,
|
|
.irq_ack = noop,
|
|
.irq_mask = prcmu_irq_mask,
|
|
.irq_unmask = prcmu_irq_unmask,
|
|
};
|
|
|
|
void __init prcmu_early_init(void)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (cpu_is_u8500v1()) {
|
|
tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
|
|
} else if (cpu_is_u8500v2()) {
|
|
void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
|
|
|
|
if (tcpm_base != NULL) {
|
|
int version;
|
|
version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
|
|
prcmu_version.project_number = version & 0xFF;
|
|
prcmu_version.api_version = (version >> 8) & 0xFF;
|
|
prcmu_version.func_version = (version >> 16) & 0xFF;
|
|
prcmu_version.errata = (version >> 24) & 0xFF;
|
|
pr_info("PRCMU firmware version %d.%d.%d\n",
|
|
(version >> 8) & 0xFF, (version >> 16) & 0xFF,
|
|
(version >> 24) & 0xFF);
|
|
iounmap(tcpm_base);
|
|
}
|
|
|
|
tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
|
|
} else {
|
|
pr_err("prcmu: Unsupported chip version\n");
|
|
BUG();
|
|
}
|
|
|
|
spin_lock_init(&mb0_transfer.lock);
|
|
spin_lock_init(&mb0_transfer.dbb_irqs_lock);
|
|
mutex_init(&mb0_transfer.ac_wake_lock);
|
|
init_completion(&mb0_transfer.ac_wake_work);
|
|
mutex_init(&mb1_transfer.lock);
|
|
init_completion(&mb1_transfer.work);
|
|
mutex_init(&mb2_transfer.lock);
|
|
init_completion(&mb2_transfer.work);
|
|
spin_lock_init(&mb2_transfer.auto_pm_lock);
|
|
spin_lock_init(&mb3_transfer.lock);
|
|
mutex_init(&mb3_transfer.sysclk_lock);
|
|
init_completion(&mb3_transfer.sysclk_work);
|
|
mutex_init(&mb4_transfer.lock);
|
|
init_completion(&mb4_transfer.work);
|
|
mutex_init(&mb5_transfer.lock);
|
|
init_completion(&mb5_transfer.work);
|
|
|
|
INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
|
|
|
|
/* Initalize irqs. */
|
|
for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) {
|
|
unsigned int irq;
|
|
|
|
irq = IRQ_PRCMU_BASE + i;
|
|
irq_set_chip_and_handler(irq, &prcmu_irq_chip,
|
|
handle_simple_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
}
|
|
|
|
static struct mfd_cell db8500_prcmu_devs[] = {
|
|
{
|
|
.name = "db8500-prcmu-regulators",
|
|
},
|
|
{
|
|
.name = "cpufreq-u8500",
|
|
},
|
|
};
|
|
|
|
/**
|
|
* prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
|
|
*
|
|
*/
|
|
static int __init db8500_prcmu_probe(struct platform_device *pdev)
|
|
{
|
|
int err = 0;
|
|
|
|
if (ux500_is_svp())
|
|
return -ENODEV;
|
|
|
|
/* Clean up the mailbox interrupts after pre-kernel code. */
|
|
writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
|
|
|
|
err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
|
|
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
|
|
if (err < 0) {
|
|
pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
|
|
err = -EBUSY;
|
|
goto no_irq_return;
|
|
}
|
|
|
|
if (cpu_is_u8500v20_or_later())
|
|
prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
|
|
|
|
err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
|
|
ARRAY_SIZE(db8500_prcmu_devs), NULL,
|
|
0);
|
|
|
|
if (err)
|
|
pr_err("prcmu: Failed to add subdevices\n");
|
|
else
|
|
pr_info("DB8500 PRCMU initialized\n");
|
|
|
|
no_irq_return:
|
|
return err;
|
|
}
|
|
|
|
static struct platform_driver db8500_prcmu_driver = {
|
|
.driver = {
|
|
.name = "db8500-prcmu",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init db8500_prcmu_init(void)
|
|
{
|
|
return platform_driver_probe(&db8500_prcmu_driver, db8500_prcmu_probe);
|
|
}
|
|
|
|
arch_initcall(db8500_prcmu_init);
|
|
|
|
MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com>");
|
|
MODULE_DESCRIPTION("DB8500 PRCM Unit driver");
|
|
MODULE_LICENSE("GPL v2");
|