522 lines
12 KiB
YAML
522 lines
12 KiB
YAML
# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
|
|
|
|
name: dpll
|
|
|
|
doc: DPLL subsystem.
|
|
|
|
definitions:
|
|
-
|
|
type: enum
|
|
name: mode
|
|
doc: |
|
|
working modes a dpll can support, differentiates if and how dpll selects
|
|
one of its inputs to syntonize with it, valid values for DPLL_A_MODE
|
|
attribute
|
|
entries:
|
|
-
|
|
name: manual
|
|
doc: input can be only selected by sending a request to dpll
|
|
value: 1
|
|
-
|
|
name: automatic
|
|
doc: highest prio input pin auto selected by dpll
|
|
render-max: true
|
|
-
|
|
type: enum
|
|
name: lock-status
|
|
doc: |
|
|
provides information of dpll device lock status, valid values for
|
|
DPLL_A_LOCK_STATUS attribute
|
|
entries:
|
|
-
|
|
name: unlocked
|
|
doc: |
|
|
dpll was not yet locked to any valid input (or forced by setting
|
|
DPLL_A_MODE to DPLL_MODE_DETACHED)
|
|
value: 1
|
|
-
|
|
name: locked
|
|
doc: |
|
|
dpll is locked to a valid signal, but no holdover available
|
|
-
|
|
name: locked-ho-acq
|
|
doc: |
|
|
dpll is locked and holdover acquired
|
|
-
|
|
name: holdover
|
|
doc: |
|
|
dpll is in holdover state - lost a valid lock or was forced
|
|
by disconnecting all the pins (latter possible only
|
|
when dpll lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ,
|
|
if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the
|
|
dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED)
|
|
render-max: true
|
|
-
|
|
type: const
|
|
name: temp-divider
|
|
value: 1000
|
|
doc: |
|
|
temperature divider allowing userspace to calculate the
|
|
temperature as float with three digit decimal precision.
|
|
Value of (DPLL_A_TEMP / DPLL_TEMP_DIVIDER) is integer part of
|
|
temperature value.
|
|
Value of (DPLL_A_TEMP % DPLL_TEMP_DIVIDER) is fractional part of
|
|
temperature value.
|
|
-
|
|
type: enum
|
|
name: type
|
|
doc: type of dpll, valid values for DPLL_A_TYPE attribute
|
|
entries:
|
|
-
|
|
name: pps
|
|
doc: dpll produces Pulse-Per-Second signal
|
|
value: 1
|
|
-
|
|
name: eec
|
|
doc: dpll drives the Ethernet Equipment Clock
|
|
render-max: true
|
|
-
|
|
type: enum
|
|
name: pin-type
|
|
doc: |
|
|
defines possible types of a pin, valid values for DPLL_A_PIN_TYPE
|
|
attribute
|
|
entries:
|
|
-
|
|
name: mux
|
|
doc: aggregates another layer of selectable pins
|
|
value: 1
|
|
-
|
|
name: ext
|
|
doc: external input
|
|
-
|
|
name: synce-eth-port
|
|
doc: ethernet port PHY's recovered clock
|
|
-
|
|
name: int-oscillator
|
|
doc: device internal oscillator
|
|
-
|
|
name: gnss
|
|
doc: GNSS recovered clock
|
|
render-max: true
|
|
-
|
|
type: enum
|
|
name: pin-direction
|
|
doc: |
|
|
defines possible direction of a pin, valid values for
|
|
DPLL_A_PIN_DIRECTION attribute
|
|
entries:
|
|
-
|
|
name: input
|
|
doc: pin used as a input of a signal
|
|
value: 1
|
|
-
|
|
name: output
|
|
doc: pin used to output the signal
|
|
render-max: true
|
|
-
|
|
type: const
|
|
name: pin-frequency-1-hz
|
|
value: 1
|
|
-
|
|
type: const
|
|
name: pin-frequency-10-khz
|
|
value: 10000
|
|
-
|
|
type: const
|
|
name: pin-frequency-77_5-khz
|
|
value: 77500
|
|
-
|
|
type: const
|
|
name: pin-frequency-10-mhz
|
|
value: 10000000
|
|
-
|
|
type: enum
|
|
name: pin-state
|
|
doc: |
|
|
defines possible states of a pin, valid values for
|
|
DPLL_A_PIN_STATE attribute
|
|
entries:
|
|
-
|
|
name: connected
|
|
doc: pin connected, active input of phase locked loop
|
|
value: 1
|
|
-
|
|
name: disconnected
|
|
doc: pin disconnected, not considered as a valid input
|
|
-
|
|
name: selectable
|
|
doc: pin enabled for automatic input selection
|
|
render-max: true
|
|
-
|
|
type: flags
|
|
name: pin-capabilities
|
|
doc: |
|
|
defines possible capabilities of a pin, valid flags on
|
|
DPLL_A_PIN_CAPABILITIES attribute
|
|
entries:
|
|
-
|
|
name: direction-can-change
|
|
doc: pin direction can be changed
|
|
-
|
|
name: priority-can-change
|
|
doc: pin priority can be changed
|
|
-
|
|
name: state-can-change
|
|
doc: pin state can be changed
|
|
-
|
|
type: const
|
|
name: phase-offset-divider
|
|
value: 1000
|
|
doc: |
|
|
phase offset divider allows userspace to calculate a value of
|
|
measured signal phase difference between a pin and dpll device
|
|
as a fractional value with three digit decimal precision.
|
|
Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an
|
|
integer part of a measured phase offset value.
|
|
Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a
|
|
fractional part of a measured phase offset value.
|
|
|
|
attribute-sets:
|
|
-
|
|
name: dpll
|
|
enum-name: dpll_a
|
|
attributes:
|
|
-
|
|
name: id
|
|
type: u32
|
|
-
|
|
name: module-name
|
|
type: string
|
|
-
|
|
name: pad
|
|
type: pad
|
|
-
|
|
name: clock-id
|
|
type: u64
|
|
-
|
|
name: mode
|
|
type: u32
|
|
enum: mode
|
|
-
|
|
name: mode-supported
|
|
type: u32
|
|
enum: mode
|
|
multi-attr: true
|
|
-
|
|
name: lock-status
|
|
type: u32
|
|
enum: lock-status
|
|
-
|
|
name: temp
|
|
type: s32
|
|
-
|
|
name: type
|
|
type: u32
|
|
enum: type
|
|
-
|
|
name: pin
|
|
enum-name: dpll_a_pin
|
|
attributes:
|
|
-
|
|
name: id
|
|
type: u32
|
|
-
|
|
name: parent-id
|
|
type: u32
|
|
-
|
|
name: module-name
|
|
type: string
|
|
-
|
|
name: pad
|
|
type: pad
|
|
-
|
|
name: clock-id
|
|
type: u64
|
|
-
|
|
name: board-label
|
|
type: string
|
|
-
|
|
name: panel-label
|
|
type: string
|
|
-
|
|
name: package-label
|
|
type: string
|
|
-
|
|
name: type
|
|
type: u32
|
|
enum: pin-type
|
|
-
|
|
name: direction
|
|
type: u32
|
|
enum: pin-direction
|
|
-
|
|
name: frequency
|
|
type: u64
|
|
-
|
|
name: frequency-supported
|
|
type: nest
|
|
multi-attr: true
|
|
nested-attributes: frequency-range
|
|
-
|
|
name: frequency-min
|
|
type: u64
|
|
-
|
|
name: frequency-max
|
|
type: u64
|
|
-
|
|
name: prio
|
|
type: u32
|
|
-
|
|
name: state
|
|
type: u32
|
|
enum: pin-state
|
|
-
|
|
name: capabilities
|
|
type: u32
|
|
-
|
|
name: parent-device
|
|
type: nest
|
|
multi-attr: true
|
|
nested-attributes: pin-parent-device
|
|
-
|
|
name: parent-pin
|
|
type: nest
|
|
multi-attr: true
|
|
nested-attributes: pin-parent-pin
|
|
-
|
|
name: phase-adjust-min
|
|
type: s32
|
|
-
|
|
name: phase-adjust-max
|
|
type: s32
|
|
-
|
|
name: phase-adjust
|
|
type: s32
|
|
-
|
|
name: phase-offset
|
|
type: s64
|
|
-
|
|
name: fractional-frequency-offset
|
|
type: sint
|
|
doc: |
|
|
The FFO (Fractional Frequency Offset) between the RX and TX
|
|
symbol rate on the media associated with the pin:
|
|
(rx_frequency-tx_frequency)/rx_frequency
|
|
Value is in PPM (parts per million).
|
|
This may be implemented for example for pin of type
|
|
PIN_TYPE_SYNCE_ETH_PORT.
|
|
-
|
|
name: pin-parent-device
|
|
subset-of: pin
|
|
attributes:
|
|
-
|
|
name: parent-id
|
|
-
|
|
name: direction
|
|
-
|
|
name: prio
|
|
-
|
|
name: state
|
|
-
|
|
name: phase-offset
|
|
-
|
|
name: pin-parent-pin
|
|
subset-of: pin
|
|
attributes:
|
|
-
|
|
name: parent-id
|
|
-
|
|
name: state
|
|
-
|
|
name: frequency-range
|
|
subset-of: pin
|
|
attributes:
|
|
-
|
|
name: frequency-min
|
|
-
|
|
name: frequency-max
|
|
|
|
operations:
|
|
enum-name: dpll_cmd
|
|
list:
|
|
-
|
|
name: device-id-get
|
|
doc: |
|
|
Get id of dpll device that matches given attributes
|
|
attribute-set: dpll
|
|
flags: [ admin-perm ]
|
|
|
|
do:
|
|
pre: dpll-lock-doit
|
|
post: dpll-unlock-doit
|
|
request:
|
|
attributes:
|
|
- module-name
|
|
- clock-id
|
|
- type
|
|
reply:
|
|
attributes:
|
|
- id
|
|
|
|
-
|
|
name: device-get
|
|
doc: |
|
|
Get list of DPLL devices (dump) or attributes of a single dpll device
|
|
attribute-set: dpll
|
|
flags: [ admin-perm ]
|
|
|
|
do:
|
|
pre: dpll-pre-doit
|
|
post: dpll-post-doit
|
|
request:
|
|
attributes:
|
|
- id
|
|
reply: &dev-attrs
|
|
attributes:
|
|
- id
|
|
- module-name
|
|
- mode
|
|
- mode-supported
|
|
- lock-status
|
|
- temp
|
|
- clock-id
|
|
- type
|
|
|
|
dump:
|
|
pre: dpll-lock-dumpit
|
|
post: dpll-unlock-dumpit
|
|
reply: *dev-attrs
|
|
|
|
-
|
|
name: device-set
|
|
doc: Set attributes for a DPLL device
|
|
attribute-set: dpll
|
|
flags: [ admin-perm ]
|
|
|
|
do:
|
|
pre: dpll-pre-doit
|
|
post: dpll-post-doit
|
|
request:
|
|
attributes:
|
|
- id
|
|
-
|
|
name: device-create-ntf
|
|
doc: Notification about device appearing
|
|
notify: device-get
|
|
mcgrp: monitor
|
|
-
|
|
name: device-delete-ntf
|
|
doc: Notification about device disappearing
|
|
notify: device-get
|
|
mcgrp: monitor
|
|
-
|
|
name: device-change-ntf
|
|
doc: Notification about device configuration being changed
|
|
notify: device-get
|
|
mcgrp: monitor
|
|
-
|
|
name: pin-id-get
|
|
doc: |
|
|
Get id of a pin that matches given attributes
|
|
attribute-set: pin
|
|
flags: [ admin-perm ]
|
|
|
|
do:
|
|
pre: dpll-lock-doit
|
|
post: dpll-unlock-doit
|
|
request:
|
|
attributes:
|
|
- module-name
|
|
- clock-id
|
|
- board-label
|
|
- panel-label
|
|
- package-label
|
|
- type
|
|
reply:
|
|
attributes:
|
|
- id
|
|
|
|
-
|
|
name: pin-get
|
|
doc: |
|
|
Get list of pins and its attributes.
|
|
- dump request without any attributes given - list all the pins in the
|
|
system
|
|
- dump request with target dpll - list all the pins registered with
|
|
a given dpll device
|
|
- do request with target dpll and target pin - single pin attributes
|
|
attribute-set: pin
|
|
flags: [ admin-perm ]
|
|
|
|
do:
|
|
pre: dpll-pin-pre-doit
|
|
post: dpll-pin-post-doit
|
|
request:
|
|
attributes:
|
|
- id
|
|
reply: &pin-attrs
|
|
attributes:
|
|
- id
|
|
- board-label
|
|
- panel-label
|
|
- package-label
|
|
- type
|
|
- frequency
|
|
- frequency-supported
|
|
- capabilities
|
|
- parent-device
|
|
- parent-pin
|
|
- phase-adjust-min
|
|
- phase-adjust-max
|
|
- phase-adjust
|
|
- fractional-frequency-offset
|
|
|
|
dump:
|
|
pre: dpll-lock-dumpit
|
|
post: dpll-unlock-dumpit
|
|
request:
|
|
attributes:
|
|
- id
|
|
reply: *pin-attrs
|
|
|
|
-
|
|
name: pin-set
|
|
doc: Set attributes of a target pin
|
|
attribute-set: pin
|
|
flags: [ admin-perm ]
|
|
|
|
do:
|
|
pre: dpll-pin-pre-doit
|
|
post: dpll-pin-post-doit
|
|
request:
|
|
attributes:
|
|
- id
|
|
- frequency
|
|
- direction
|
|
- prio
|
|
- state
|
|
- parent-device
|
|
- parent-pin
|
|
- phase-adjust
|
|
-
|
|
name: pin-create-ntf
|
|
doc: Notification about pin appearing
|
|
notify: pin-get
|
|
mcgrp: monitor
|
|
-
|
|
name: pin-delete-ntf
|
|
doc: Notification about pin disappearing
|
|
notify: pin-get
|
|
mcgrp: monitor
|
|
-
|
|
name: pin-change-ntf
|
|
doc: Notification about pin configuration being changed
|
|
notify: pin-get
|
|
mcgrp: monitor
|
|
|
|
mcast-groups:
|
|
list:
|
|
-
|
|
name: monitor
|