Bruce Allan 400484fa65 e1000e: do not schedule the Tx queue until ready ... Start the Tx queue when the interface is brought up in e1000e_up() but do not schedule the queue until link is up as detected in the watchdog task which sets netif_carrier_on. Also flush the descriptors and clean the Tx and Rx rings before resetting the hardware when bringing the interface down otherwise there is a small window where the watchdog task can be triggered with netif_carrier_off and the Tx ring not yet empty which causes an additional and unnecessary reset. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2011-06-09 20:33:08 -07:00
..
82571.c	e1000e: implement ethtool set_phys_id	2011-04-27 02:05:53 -07:00
defines.h	e1000e: disable jumbo frames on 82579 when MACsec enabled in EEPROM	2011-03-11 02:23:21 -08:00
e1000.h	e1000e: 82579 intermittently disabled during S0->Sx	2011-06-09 20:31:49 -07:00
es2lan.c	e1000e: disable far-end loopback mode on ESB2	2011-06-09 20:31:24 -07:00
ethtool.c	net: remove interrupt.h inclusion from netdevice.h	2011-06-06 22:55:11 -07:00
hw.h	e1000e: disable far-end loopback mode on ESB2	2011-06-09 20:31:24 -07:00
ich8lan.c	e1000e: log when swflag is cleared unexpectedly on ICH/PCH devices	2011-06-09 20:32:28 -07:00
lib.c	e1000e: minor comment cleanups	2011-05-14 17:50:01 -07:00
Makefile	e1000e: update Copyright for 2011	2011-01-14 02:04:01 -08:00
netdev.c	e1000e: do not schedule the Tx queue until ready	2011-06-09 20:33:08 -07:00
param.c	e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs	2011-01-14 02:06:23 -08:00
phy.c	e1000e: convert short duration msleep() to usleep_range()	2011-04-13 19:17:06 -07:00