mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 01:41:39 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
275 lines
5.7 KiB
C
275 lines
5.7 KiB
C
/*
|
|
* linux/drivers/mfd/mcp-sa11x0.c
|
|
*
|
|
* Copyright (C) 2001-2005 Russell King
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*
|
|
* SA11x0 MCP (Multimedia Communications Port) driver.
|
|
*
|
|
* MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/mcp.h>
|
|
|
|
#include <mach/dma.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/system.h>
|
|
#include <mach/mcp.h>
|
|
|
|
#include <mach/assabet.h>
|
|
|
|
|
|
struct mcp_sa11x0 {
|
|
u32 mccr0;
|
|
u32 mccr1;
|
|
};
|
|
|
|
#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
|
|
|
|
static void
|
|
mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
|
|
{
|
|
unsigned int mccr0;
|
|
|
|
divisor /= 32;
|
|
|
|
mccr0 = Ser4MCCR0 & ~0x00007f00;
|
|
mccr0 |= divisor << 8;
|
|
Ser4MCCR0 = mccr0;
|
|
}
|
|
|
|
static void
|
|
mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
|
|
{
|
|
unsigned int mccr0;
|
|
|
|
divisor /= 32;
|
|
|
|
mccr0 = Ser4MCCR0 & ~0x0000007f;
|
|
mccr0 |= divisor;
|
|
Ser4MCCR0 = mccr0;
|
|
}
|
|
|
|
/*
|
|
* Write data to the device. The bit should be set after 3 subframe
|
|
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
|
|
* We really should try doing something more productive while we
|
|
* wait.
|
|
*/
|
|
static void
|
|
mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
|
|
{
|
|
int ret = -ETIME;
|
|
int i;
|
|
|
|
Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
udelay(mcp->rw_timeout);
|
|
if (Ser4MCSR & MCSR_CWC) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret < 0)
|
|
printk(KERN_WARNING "mcp: write timed out\n");
|
|
}
|
|
|
|
/*
|
|
* Read data from the device. The bit should be set after 3 subframe
|
|
* times (each frame is 64 clocks). We wait a maximum of 6 subframes.
|
|
* We really should try doing something more productive while we
|
|
* wait.
|
|
*/
|
|
static unsigned int
|
|
mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
|
|
{
|
|
int ret = -ETIME;
|
|
int i;
|
|
|
|
Ser4MCDR2 = reg << 17 | MCDR2_Rd;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
udelay(mcp->rw_timeout);
|
|
if (Ser4MCSR & MCSR_CRC) {
|
|
ret = Ser4MCDR2 & 0xffff;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret < 0)
|
|
printk(KERN_WARNING "mcp: read timed out\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mcp_sa11x0_enable(struct mcp *mcp)
|
|
{
|
|
Ser4MCSR = -1;
|
|
Ser4MCCR0 |= MCCR0_MCE;
|
|
}
|
|
|
|
static void mcp_sa11x0_disable(struct mcp *mcp)
|
|
{
|
|
Ser4MCCR0 &= ~MCCR0_MCE;
|
|
}
|
|
|
|
/*
|
|
* Our methods.
|
|
*/
|
|
static struct mcp_ops mcp_sa11x0 = {
|
|
.set_telecom_divisor = mcp_sa11x0_set_telecom_divisor,
|
|
.set_audio_divisor = mcp_sa11x0_set_audio_divisor,
|
|
.reg_write = mcp_sa11x0_write,
|
|
.reg_read = mcp_sa11x0_read,
|
|
.enable = mcp_sa11x0_enable,
|
|
.disable = mcp_sa11x0_disable,
|
|
};
|
|
|
|
static int mcp_sa11x0_probe(struct platform_device *pdev)
|
|
{
|
|
struct mcp_plat_data *data = pdev->dev.platform_data;
|
|
struct mcp *mcp;
|
|
int ret;
|
|
|
|
if (!data)
|
|
return -ENODEV;
|
|
|
|
if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
|
|
return -EBUSY;
|
|
|
|
mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
|
|
if (!mcp) {
|
|
ret = -ENOMEM;
|
|
goto release;
|
|
}
|
|
|
|
mcp->owner = THIS_MODULE;
|
|
mcp->ops = &mcp_sa11x0;
|
|
mcp->sclk_rate = data->sclk_rate;
|
|
mcp->dma_audio_rd = DMA_Ser4MCP0Rd;
|
|
mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
|
|
mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
|
|
mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
|
|
mcp->gpio_base = data->gpio_base;
|
|
|
|
platform_set_drvdata(pdev, mcp);
|
|
|
|
if (machine_is_assabet()) {
|
|
ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
|
|
}
|
|
|
|
/*
|
|
* Setup the PPC unit correctly.
|
|
*/
|
|
PPDR &= ~PPC_RXD4;
|
|
PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
|
|
PSDR |= PPC_RXD4;
|
|
PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
|
|
PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
|
|
|
|
/*
|
|
* Initialise device. Note that we initially
|
|
* set the sampling rate to minimum.
|
|
*/
|
|
Ser4MCSR = -1;
|
|
Ser4MCCR1 = data->mccr1;
|
|
Ser4MCCR0 = data->mccr0 | 0x7f7f;
|
|
|
|
/*
|
|
* Calculate the read/write timeout (us) from the bit clock
|
|
* rate. This is the period for 3 64-bit frames. Always
|
|
* round this time up.
|
|
*/
|
|
mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
|
|
mcp->sclk_rate;
|
|
|
|
ret = mcp_host_register(mcp);
|
|
if (ret == 0)
|
|
goto out;
|
|
|
|
release:
|
|
release_mem_region(0x80060000, 0x60);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int mcp_sa11x0_remove(struct platform_device *dev)
|
|
{
|
|
struct mcp *mcp = platform_get_drvdata(dev);
|
|
|
|
platform_set_drvdata(dev, NULL);
|
|
mcp_host_unregister(mcp);
|
|
release_mem_region(0x80060000, 0x60);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct mcp *mcp = platform_get_drvdata(dev);
|
|
|
|
priv(mcp)->mccr0 = Ser4MCCR0;
|
|
priv(mcp)->mccr1 = Ser4MCCR1;
|
|
Ser4MCCR0 &= ~MCCR0_MCE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcp_sa11x0_resume(struct platform_device *dev)
|
|
{
|
|
struct mcp *mcp = platform_get_drvdata(dev);
|
|
|
|
Ser4MCCR1 = priv(mcp)->mccr1;
|
|
Ser4MCCR0 = priv(mcp)->mccr0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The driver for the SA11x0 MCP port.
|
|
*/
|
|
MODULE_ALIAS("platform:sa11x0-mcp");
|
|
|
|
static struct platform_driver mcp_sa11x0_driver = {
|
|
.probe = mcp_sa11x0_probe,
|
|
.remove = mcp_sa11x0_remove,
|
|
.suspend = mcp_sa11x0_suspend,
|
|
.resume = mcp_sa11x0_resume,
|
|
.driver = {
|
|
.name = "sa11x0-mcp",
|
|
},
|
|
};
|
|
|
|
/*
|
|
* This needs re-working
|
|
*/
|
|
static int __init mcp_sa11x0_init(void)
|
|
{
|
|
return platform_driver_register(&mcp_sa11x0_driver);
|
|
}
|
|
|
|
static void __exit mcp_sa11x0_exit(void)
|
|
{
|
|
platform_driver_unregister(&mcp_sa11x0_driver);
|
|
}
|
|
|
|
module_init(mcp_sa11x0_init);
|
|
module_exit(mcp_sa11x0_exit);
|
|
|
|
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
|
|
MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
|
|
MODULE_LICENSE("GPL");
|