mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Kishon Vijay Abraham I](/assets/img/avatar_default.png)
commita44623d927
upstream. It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. This patch has been added and reverted earier as it triggered a race in usb device enumeration. That race is now fixed in 5.16-rc3, and in stable back to 5.4 commit6cca13de26
("usb: hub: Fix locking issues with address0_mutex") commit6ae6dc22d2
("usb: hub: Fix usb enumeration issue due to address0 race") CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220510091630.16564-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
756 lines
27 KiB
C
756 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2001-2002 by David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef __USB_CORE_HCD_H
|
|
#define __USB_CORE_HCD_H
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/rwsem.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/idr.h>
|
|
|
|
#define MAX_TOPO_LEVEL 6
|
|
|
|
/* This file contains declarations of usbcore internals that are mostly
|
|
* used or exposed by Host Controller Drivers.
|
|
*/
|
|
|
|
/*
|
|
* USB Packet IDs (PIDs)
|
|
*/
|
|
#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
|
|
#define USB_PID_OUT 0xe1
|
|
#define USB_PID_ACK 0xd2
|
|
#define USB_PID_DATA0 0xc3
|
|
#define USB_PID_PING 0xb4 /* USB 2.0 */
|
|
#define USB_PID_SOF 0xa5
|
|
#define USB_PID_NYET 0x96 /* USB 2.0 */
|
|
#define USB_PID_DATA2 0x87 /* USB 2.0 */
|
|
#define USB_PID_SPLIT 0x78 /* USB 2.0 */
|
|
#define USB_PID_IN 0x69
|
|
#define USB_PID_NAK 0x5a
|
|
#define USB_PID_DATA1 0x4b
|
|
#define USB_PID_PREAMBLE 0x3c /* Token mode */
|
|
#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
|
|
#define USB_PID_SETUP 0x2d
|
|
#define USB_PID_STALL 0x1e
|
|
#define USB_PID_MDATA 0x0f /* USB 2.0 */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* USB Host Controller Driver (usb_hcd) framework
|
|
*
|
|
* Since "struct usb_bus" is so thin, you can't share much code in it.
|
|
* This framework is a layer over that, and should be more sharable.
|
|
*/
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
struct giveback_urb_bh {
|
|
bool running;
|
|
spinlock_t lock;
|
|
struct list_head head;
|
|
struct tasklet_struct bh;
|
|
struct usb_host_endpoint *completing_ep;
|
|
};
|
|
|
|
enum usb_dev_authorize_policy {
|
|
USB_DEVICE_AUTHORIZE_NONE = 0,
|
|
USB_DEVICE_AUTHORIZE_ALL = 1,
|
|
USB_DEVICE_AUTHORIZE_INTERNAL = 2,
|
|
};
|
|
|
|
struct usb_hcd {
|
|
|
|
/*
|
|
* housekeeping
|
|
*/
|
|
struct usb_bus self; /* hcd is-a bus */
|
|
struct kref kref; /* reference counter */
|
|
|
|
const char *product_desc; /* product/vendor string */
|
|
int speed; /* Speed for this roothub.
|
|
* May be different from
|
|
* hcd->driver->flags & HCD_MASK
|
|
*/
|
|
char irq_descr[24]; /* driver + bus # */
|
|
|
|
struct timer_list rh_timer; /* drives root-hub polling */
|
|
struct urb *status_urb; /* the current status urb */
|
|
#ifdef CONFIG_PM
|
|
struct work_struct wakeup_work; /* for remote wakeup */
|
|
#endif
|
|
struct work_struct died_work; /* for when the device dies */
|
|
|
|
/*
|
|
* hardware info/state
|
|
*/
|
|
const struct hc_driver *driver; /* hw-specific hooks */
|
|
|
|
/*
|
|
* OTG and some Host controllers need software interaction with phys;
|
|
* other external phys should be software-transparent
|
|
*/
|
|
struct usb_phy *usb_phy;
|
|
struct usb_phy_roothub *phy_roothub;
|
|
|
|
/* Flags that need to be manipulated atomically because they can
|
|
* change while the host controller is running. Always use
|
|
* set_bit() or clear_bit() to change their values.
|
|
*/
|
|
unsigned long flags;
|
|
#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
|
|
#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
|
|
#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
|
|
#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
|
|
#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
|
|
#define HCD_FLAG_DEAD 6 /* controller has died? */
|
|
#define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
|
|
#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */
|
|
|
|
/* The flags can be tested using these macros; they are likely to
|
|
* be slightly faster than test_bit().
|
|
*/
|
|
#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
|
|
#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
|
|
#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
|
|
#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
|
|
#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
|
|
#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
|
|
#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER))
|
|
|
|
/*
|
|
* Specifies if interfaces are authorized by default
|
|
* or they require explicit user space authorization; this bit is
|
|
* settable through /sys/class/usb_host/X/interface_authorized_default
|
|
*/
|
|
#define HCD_INTF_AUTHORIZED(hcd) \
|
|
((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED))
|
|
|
|
/*
|
|
* Specifies if devices are authorized by default
|
|
* or they require explicit user space authorization; this bit is
|
|
* settable through /sys/class/usb_host/X/authorized_default
|
|
*/
|
|
enum usb_dev_authorize_policy dev_policy;
|
|
|
|
/* Flags that get set only during HCD registration or removal. */
|
|
unsigned rh_registered:1;/* is root hub registered? */
|
|
unsigned rh_pollable:1; /* may we poll the root hub? */
|
|
unsigned msix_enabled:1; /* driver has MSI-X enabled? */
|
|
unsigned msi_enabled:1; /* driver has MSI enabled? */
|
|
/*
|
|
* do not manage the PHY state in the HCD core, instead let the driver
|
|
* handle this (for example if the PHY can only be turned on after a
|
|
* specific event)
|
|
*/
|
|
unsigned skip_phy_initialization:1;
|
|
|
|
/* The next flag is a stopgap, to be removed when all the HCDs
|
|
* support the new root-hub polling mechanism. */
|
|
unsigned uses_new_polling:1;
|
|
unsigned wireless:1; /* Wireless USB HCD */
|
|
unsigned has_tt:1; /* Integrated TT in root hub */
|
|
unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
|
|
unsigned can_do_streams:1; /* HC supports streams */
|
|
unsigned tpl_support:1; /* OTG & EH TPL support */
|
|
unsigned cant_recv_wakeups:1;
|
|
/* wakeup requests from downstream aren't received */
|
|
|
|
unsigned int irq; /* irq allocated */
|
|
void __iomem *regs; /* device memory/io */
|
|
resource_size_t rsrc_start; /* memory/io resource start */
|
|
resource_size_t rsrc_len; /* memory/io resource length */
|
|
unsigned power_budget; /* in mA, 0 = no limit */
|
|
|
|
struct giveback_urb_bh high_prio_bh;
|
|
struct giveback_urb_bh low_prio_bh;
|
|
|
|
/* bandwidth_mutex should be taken before adding or removing
|
|
* any new bus bandwidth constraints:
|
|
* 1. Before adding a configuration for a new device.
|
|
* 2. Before removing the configuration to put the device into
|
|
* the addressed state.
|
|
* 3. Before selecting a different configuration.
|
|
* 4. Before selecting an alternate interface setting.
|
|
*
|
|
* bandwidth_mutex should be dropped after a successful control message
|
|
* to the device, or resetting the bandwidth after a failed attempt.
|
|
*/
|
|
struct mutex *address0_mutex;
|
|
struct mutex *bandwidth_mutex;
|
|
struct usb_hcd *shared_hcd;
|
|
struct usb_hcd *primary_hcd;
|
|
|
|
|
|
#define HCD_BUFFER_POOLS 4
|
|
struct dma_pool *pool[HCD_BUFFER_POOLS];
|
|
|
|
int state;
|
|
# define __ACTIVE 0x01
|
|
# define __SUSPEND 0x04
|
|
# define __TRANSIENT 0x80
|
|
|
|
# define HC_STATE_HALT 0
|
|
# define HC_STATE_RUNNING (__ACTIVE)
|
|
# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
|
|
# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
|
|
# define HC_STATE_SUSPENDED (__SUSPEND)
|
|
|
|
#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
|
|
#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
|
|
|
|
/* memory pool for HCs having local memory, or %NULL */
|
|
struct gen_pool *localmem_pool;
|
|
|
|
/* more shared queuing code would be good; it should support
|
|
* smarter scheduling, handle transaction translators, etc;
|
|
* input size of periodic table to an interrupt scheduler.
|
|
* (ohci 32, uhci 1024, ehci 256/512/1024).
|
|
*/
|
|
|
|
/* The HC driver's private data is stored at the end of
|
|
* this structure.
|
|
*/
|
|
unsigned long hcd_priv[]
|
|
__attribute__ ((aligned(sizeof(s64))));
|
|
};
|
|
|
|
/* 2.4 does this a bit differently ... */
|
|
static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
|
|
{
|
|
return &hcd->self;
|
|
}
|
|
|
|
static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
|
|
{
|
|
return container_of(bus, struct usb_hcd, self);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
struct hc_driver {
|
|
const char *description; /* "ehci-hcd" etc */
|
|
const char *product_desc; /* product/vendor string */
|
|
size_t hcd_priv_size; /* size of private data */
|
|
|
|
/* irq handler */
|
|
irqreturn_t (*irq) (struct usb_hcd *hcd);
|
|
|
|
int flags;
|
|
#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
|
|
#define HCD_DMA 0x0002 /* HC uses DMA */
|
|
#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
|
|
#define HCD_USB11 0x0010 /* USB 1.1 */
|
|
#define HCD_USB2 0x0020 /* USB 2.0 */
|
|
#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/
|
|
#define HCD_USB3 0x0040 /* USB 3.0 */
|
|
#define HCD_USB31 0x0050 /* USB 3.1 */
|
|
#define HCD_USB32 0x0060 /* USB 3.2 */
|
|
#define HCD_MASK 0x0070
|
|
#define HCD_BH 0x0100 /* URB complete in BH context */
|
|
|
|
/* called to init HCD and root hub */
|
|
int (*reset) (struct usb_hcd *hcd);
|
|
int (*start) (struct usb_hcd *hcd);
|
|
|
|
/* NOTE: these suspend/resume calls relate to the HC as
|
|
* a whole, not just the root hub; they're for PCI bus glue.
|
|
*/
|
|
/* called after suspending the hub, before entering D3 etc */
|
|
int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
|
|
|
|
/* called after entering D0 (etc), before resuming the hub */
|
|
int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
|
|
|
|
/* cleanly make HCD stop writing memory and doing I/O */
|
|
void (*stop) (struct usb_hcd *hcd);
|
|
|
|
/* shutdown HCD */
|
|
void (*shutdown) (struct usb_hcd *hcd);
|
|
|
|
/* return current frame number */
|
|
int (*get_frame_number) (struct usb_hcd *hcd);
|
|
|
|
/* manage i/o requests, device state */
|
|
int (*urb_enqueue)(struct usb_hcd *hcd,
|
|
struct urb *urb, gfp_t mem_flags);
|
|
int (*urb_dequeue)(struct usb_hcd *hcd,
|
|
struct urb *urb, int status);
|
|
|
|
/*
|
|
* (optional) these hooks allow an HCD to override the default DMA
|
|
* mapping and unmapping routines. In general, they shouldn't be
|
|
* necessary unless the host controller has special DMA requirements,
|
|
* such as alignment contraints. If these are not specified, the
|
|
* general usb_hcd_(un)?map_urb_for_dma functions will be used instead
|
|
* (and it may be a good idea to call these functions in your HCD
|
|
* implementation)
|
|
*/
|
|
int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
|
|
gfp_t mem_flags);
|
|
void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
|
|
|
|
/* hw synch, freeing endpoint resources that urb_dequeue can't */
|
|
void (*endpoint_disable)(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep);
|
|
|
|
/* (optional) reset any endpoint state such as sequence number
|
|
and current window */
|
|
void (*endpoint_reset)(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep);
|
|
|
|
/* root hub support */
|
|
int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
|
|
int (*hub_control) (struct usb_hcd *hcd,
|
|
u16 typeReq, u16 wValue, u16 wIndex,
|
|
char *buf, u16 wLength);
|
|
int (*bus_suspend)(struct usb_hcd *);
|
|
int (*bus_resume)(struct usb_hcd *);
|
|
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
|
|
unsigned long (*get_resuming_ports)(struct usb_hcd *);
|
|
|
|
/* force handover of high-speed port to full-speed companion */
|
|
void (*relinquish_port)(struct usb_hcd *, int);
|
|
/* has a port been handed over to a companion? */
|
|
int (*port_handed_over)(struct usb_hcd *, int);
|
|
|
|
/* CLEAR_TT_BUFFER completion callback */
|
|
void (*clear_tt_buffer_complete)(struct usb_hcd *,
|
|
struct usb_host_endpoint *);
|
|
|
|
/* xHCI specific functions */
|
|
/* Called by usb_alloc_dev to alloc HC device structures */
|
|
int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
|
|
/* Called by usb_disconnect to free HC device structures */
|
|
void (*free_dev)(struct usb_hcd *, struct usb_device *);
|
|
/* Change a group of bulk endpoints to support multiple stream IDs */
|
|
int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps,
|
|
unsigned int num_streams, gfp_t mem_flags);
|
|
/* Reverts a group of bulk endpoints back to not using stream IDs.
|
|
* Can fail if we run out of memory.
|
|
*/
|
|
int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps,
|
|
gfp_t mem_flags);
|
|
|
|
/* Bandwidth computation functions */
|
|
/* Note that add_endpoint() can only be called once per endpoint before
|
|
* check_bandwidth() or reset_bandwidth() must be called.
|
|
* drop_endpoint() can only be called once per endpoint also.
|
|
* A call to xhci_drop_endpoint() followed by a call to
|
|
* xhci_add_endpoint() will add the endpoint to the schedule with
|
|
* possibly new parameters denoted by a different endpoint descriptor
|
|
* in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
|
|
* call to xhci_drop_endpoint() is not allowed.
|
|
*/
|
|
/* Allocate endpoint resources and add them to a new schedule */
|
|
int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
|
|
struct usb_host_endpoint *);
|
|
/* Drop an endpoint from a new schedule */
|
|
int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
|
|
struct usb_host_endpoint *);
|
|
/* Check that a new hardware configuration, set using
|
|
* endpoint_enable and endpoint_disable, does not exceed bus
|
|
* bandwidth. This must be called before any set configuration
|
|
* or set interface requests are sent to the device.
|
|
*/
|
|
int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
|
|
/* Reset the device schedule to the last known good schedule,
|
|
* which was set from a previous successful call to
|
|
* check_bandwidth(). This reverts any add_endpoint() and
|
|
* drop_endpoint() calls since that last successful call.
|
|
* Used for when a check_bandwidth() call fails due to resource
|
|
* or bandwidth constraints.
|
|
*/
|
|
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
|
|
/* Returns the hardware-chosen device address */
|
|
int (*address_device)(struct usb_hcd *, struct usb_device *udev);
|
|
/* prepares the hardware to send commands to the device */
|
|
int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
|
|
/* Notifies the HCD after a hub descriptor is fetched.
|
|
* Will block.
|
|
*/
|
|
int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
|
|
struct usb_tt *tt, gfp_t mem_flags);
|
|
int (*reset_device)(struct usb_hcd *, struct usb_device *);
|
|
/* Notifies the HCD after a device is connected and its
|
|
* address is set
|
|
*/
|
|
int (*update_device)(struct usb_hcd *, struct usb_device *);
|
|
int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
|
|
/* USB 3.0 Link Power Management */
|
|
/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
|
|
int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
|
|
struct usb_device *, enum usb3_link_state state);
|
|
/* The xHCI host controller can still fail the command to
|
|
* disable the LPM timeouts, so this can return an error code.
|
|
*/
|
|
int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
|
|
struct usb_device *, enum usb3_link_state state);
|
|
int (*find_raw_port_number)(struct usb_hcd *, int);
|
|
/* Call for power on/off the port if necessary */
|
|
int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
|
|
|
|
};
|
|
|
|
static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
|
|
{
|
|
return hcd->driver->flags & HCD_BH;
|
|
}
|
|
|
|
static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
return hcd->high_prio_bh.completing_ep == ep;
|
|
}
|
|
|
|
static inline bool hcd_uses_dma(struct usb_hcd *hcd)
|
|
{
|
|
return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA);
|
|
}
|
|
|
|
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
|
|
extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
|
|
int status);
|
|
extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
|
|
|
|
extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
|
|
extern int usb_hcd_unlink_urb(struct urb *urb, int status);
|
|
extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
|
|
int status);
|
|
extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
|
|
gfp_t mem_flags);
|
|
extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
|
|
extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
|
|
extern void usb_hcd_flush_endpoint(struct usb_device *udev,
|
|
struct usb_host_endpoint *ep);
|
|
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
|
|
struct usb_host_endpoint *ep);
|
|
extern void usb_hcd_reset_endpoint(struct usb_device *udev,
|
|
struct usb_host_endpoint *ep);
|
|
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
|
|
extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
|
|
struct usb_host_config *new_config,
|
|
struct usb_host_interface *old_alt,
|
|
struct usb_host_interface *new_alt);
|
|
extern int usb_hcd_get_frame_number(struct usb_device *udev);
|
|
|
|
struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
|
|
struct device *sysdev, struct device *dev, const char *bus_name,
|
|
struct usb_hcd *primary_hcd);
|
|
extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
|
|
struct device *dev, const char *bus_name);
|
|
extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
|
|
struct device *dev, const char *bus_name,
|
|
struct usb_hcd *shared_hcd);
|
|
extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
|
|
extern void usb_put_hcd(struct usb_hcd *hcd);
|
|
extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
|
|
extern int usb_add_hcd(struct usb_hcd *hcd,
|
|
unsigned int irqnum, unsigned long irqflags);
|
|
extern void usb_remove_hcd(struct usb_hcd *hcd);
|
|
extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
|
|
int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
|
|
dma_addr_t dma, size_t size);
|
|
|
|
struct platform_device;
|
|
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
|
|
|
|
#ifdef CONFIG_USB_PCI
|
|
struct pci_dev;
|
|
struct pci_device_id;
|
|
extern int usb_hcd_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id,
|
|
const struct hc_driver *driver);
|
|
extern void usb_hcd_pci_remove(struct pci_dev *dev);
|
|
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
|
|
|
|
extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
|
|
|
|
#ifdef CONFIG_PM
|
|
extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
|
|
#endif
|
|
#endif /* CONFIG_USB_PCI */
|
|
|
|
/* pci-ish (pdev null is ok) buffer alloc/mapping support */
|
|
void usb_init_pool_max(void);
|
|
int hcd_buffer_create(struct usb_hcd *hcd);
|
|
void hcd_buffer_destroy(struct usb_hcd *hcd);
|
|
|
|
void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
|
|
gfp_t mem_flags, dma_addr_t *dma);
|
|
void hcd_buffer_free(struct usb_bus *bus, size_t size,
|
|
void *addr, dma_addr_t dma);
|
|
|
|
/* generic bus glue, needed for host controllers that don't use PCI */
|
|
extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
|
|
|
|
extern void usb_hc_died(struct usb_hcd *hcd);
|
|
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
|
|
extern void usb_wakeup_notification(struct usb_device *hdev,
|
|
unsigned int portnum);
|
|
|
|
extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
|
|
extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
|
|
|
|
/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
|
|
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
|
|
#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
|
|
#define usb_settoggle(dev, ep, out, bit) \
|
|
((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
|
|
((bit) << (ep)))
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
/* Enumeration is only for the hub driver, or HCD virtual root hubs */
|
|
extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
|
|
struct usb_bus *, unsigned port);
|
|
extern int usb_new_device(struct usb_device *dev);
|
|
extern void usb_disconnect(struct usb_device **);
|
|
|
|
extern int usb_get_configuration(struct usb_device *dev);
|
|
extern void usb_destroy_configuration(struct usb_device *dev);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* HCD Root Hub support
|
|
*/
|
|
|
|
#include <linux/usb/ch11.h>
|
|
|
|
/*
|
|
* As of USB 2.0, full/low speed devices are segregated into trees.
|
|
* One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
|
|
* The other type grows from high speed hubs when they connect to
|
|
* full/low speed devices using "Transaction Translators" (TTs).
|
|
*
|
|
* TTs should only be known to the hub driver, and high speed bus
|
|
* drivers (only EHCI for now). They affect periodic scheduling and
|
|
* sometimes control/bulk error recovery.
|
|
*/
|
|
|
|
struct usb_device;
|
|
|
|
struct usb_tt {
|
|
struct usb_device *hub; /* upstream highspeed hub */
|
|
int multi; /* true means one TT per port */
|
|
unsigned think_time; /* think time in ns */
|
|
void *hcpriv; /* HCD private data */
|
|
|
|
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
|
|
spinlock_t lock;
|
|
struct list_head clear_list; /* of usb_tt_clear */
|
|
struct work_struct clear_work;
|
|
};
|
|
|
|
struct usb_tt_clear {
|
|
struct list_head clear_list;
|
|
unsigned tt;
|
|
u16 devinfo;
|
|
struct usb_hcd *hcd;
|
|
struct usb_host_endpoint *ep;
|
|
};
|
|
|
|
extern int usb_hub_clear_tt_buffer(struct urb *urb);
|
|
extern void usb_ep0_reinit(struct usb_device *);
|
|
|
|
/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
|
|
#define DeviceRequest \
|
|
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
|
|
#define DeviceOutRequest \
|
|
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
|
|
|
|
#define InterfaceRequest \
|
|
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
|
|
|
|
#define EndpointRequest \
|
|
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
|
|
#define EndpointOutRequest \
|
|
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
|
|
|
|
/* class requests from the USB 2.0 hub spec, table 11-15 */
|
|
#define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request))
|
|
/* GetBusState and SetHubDescriptor are optional, omitted */
|
|
#define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_CLEAR_FEATURE)
|
|
#define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_CLEAR_FEATURE)
|
|
#define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_DESCRIPTOR)
|
|
#define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_STATUS)
|
|
#define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS)
|
|
#define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE)
|
|
#define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE)
|
|
#define ClearTTBuffer HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_CLEAR_TT_BUFFER)
|
|
#define ResetTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_RESET_TT)
|
|
#define GetTTState HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_TT_STATE)
|
|
#define StopTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_STOP_TT)
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* class requests from USB 3.1 hub spec, table 10-7 */
|
|
#define SetHubDepth HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, HUB_SET_DEPTH)
|
|
#define GetPortErrorCount HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_PORT_ERR_COUNT)
|
|
|
|
/*
|
|
* Generic bandwidth allocation constants/support
|
|
*/
|
|
#define FRAME_TIME_USECS 1000L
|
|
#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
|
|
/* Trying not to use worst-case bit-stuffing
|
|
* of (7/6 * 8 * bytecount) = 9.33 * bytecount */
|
|
/* bytecount = data payload byte count */
|
|
|
|
#define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L)
|
|
/* convert nanoseconds to microseconds, rounding up */
|
|
|
|
/*
|
|
* Full/low speed bandwidth allocation constants/support.
|
|
*/
|
|
#define BW_HOST_DELAY 1000L /* nanoseconds */
|
|
#define BW_HUB_LS_SETUP 333L /* nanoseconds */
|
|
/* 4 full-speed bit times (est.) */
|
|
|
|
#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
|
|
#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
|
|
#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
|
|
|
|
/*
|
|
* Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
|
|
* ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
|
|
* to preallocate bandwidth)
|
|
*/
|
|
#define USB2_HOST_DELAY 5 /* nsec, guess */
|
|
#define HS_NSECS(bytes) (((55 * 8 * 2083) \
|
|
+ (2083UL * (3 + BitTime(bytes))))/1000 \
|
|
+ USB2_HOST_DELAY)
|
|
#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
|
|
+ (2083UL * (3 + BitTime(bytes))))/1000 \
|
|
+ USB2_HOST_DELAY)
|
|
#define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
|
|
#define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
|
|
|
|
extern long usb_calc_bus_time(int speed, int is_input,
|
|
int isoc, int bytecount);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
extern void usb_set_device_state(struct usb_device *udev,
|
|
enum usb_device_state new_state);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* exported only within usbcore */
|
|
|
|
extern struct idr usb_bus_idr;
|
|
extern struct mutex usb_bus_idr_lock;
|
|
extern wait_queue_head_t usb_kill_urb_queue;
|
|
|
|
|
|
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
|
|
|
|
#ifdef CONFIG_PM
|
|
extern unsigned usb_wakeup_enabled_descendants(struct usb_device *udev);
|
|
extern void usb_root_hub_lost_power(struct usb_device *rhdev);
|
|
extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
|
|
extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
|
|
extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
|
|
#else
|
|
static inline unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
|
|
{
|
|
return;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
|
|
|
|
struct usb_mon_operations {
|
|
void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
|
|
void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
|
|
void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
|
|
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
|
|
};
|
|
|
|
extern const struct usb_mon_operations *mon_ops;
|
|
|
|
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
|
|
{
|
|
if (bus->monitored)
|
|
(*mon_ops->urb_submit)(bus, urb);
|
|
}
|
|
|
|
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
|
|
int error)
|
|
{
|
|
if (bus->monitored)
|
|
(*mon_ops->urb_submit_error)(bus, urb, error);
|
|
}
|
|
|
|
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
|
|
int status)
|
|
{
|
|
if (bus->monitored)
|
|
(*mon_ops->urb_complete)(bus, urb, status);
|
|
}
|
|
|
|
int usb_mon_register(const struct usb_mon_operations *ops);
|
|
void usb_mon_deregister(void);
|
|
|
|
#else
|
|
|
|
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
|
|
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
|
|
int error) {}
|
|
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
|
|
int status) {}
|
|
|
|
#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* random stuff */
|
|
|
|
#define RUN_CONTEXT (in_irq() ? "in_irq" \
|
|
: (in_interrupt() ? "in_interrupt" : "can sleep"))
|
|
|
|
|
|
/* This rwsem is for use only by the hub driver and ehci-hcd.
|
|
* Nobody else should touch it.
|
|
*/
|
|
extern struct rw_semaphore ehci_cf_port_reset_rwsem;
|
|
|
|
/* Keep track of which host controller drivers are loaded */
|
|
#define USB_UHCI_LOADED 0
|
|
#define USB_OHCI_LOADED 1
|
|
#define USB_EHCI_LOADED 2
|
|
extern unsigned long usb_hcds_loaded;
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* __USB_CORE_HCD_H */
|