linux-stable/tools
Daniel Sneddon 509c2c9fe7 x86/speculation: Add RSB VM Exit protections
commit 2b12993220 upstream.

tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as
documented for RET instructions after VM exits. Mitigate it with a new
one-entry RSB stuffing mechanism and a new LFENCE.

== Background ==

Indirect Branch Restricted Speculation (IBRS) was designed to help
mitigate Branch Target Injection and Speculative Store Bypass, i.e.
Spectre, attacks. IBRS prevents software run in less privileged modes
from affecting branch prediction in more privileged modes. IBRS requires
the MSR to be written on every privilege level change.

To overcome some of the performance issues of IBRS, Enhanced IBRS was
introduced.  eIBRS is an "always on" IBRS, in other words, just turn
it on once instead of writing the MSR on every privilege level change.
When eIBRS is enabled, more privileged modes should be protected from
less privileged modes, including protecting VMMs from guests.

== Problem ==

Here's a simplification of how guests are run on Linux' KVM:

void run_kvm_guest(void)
{
	// Prepare to run guest
	VMRESUME();
	// Clean up after guest runs
}

The execution flow for that would look something like this to the
processor:

1. Host-side: call run_kvm_guest()
2. Host-side: VMRESUME
3. Guest runs, does "CALL guest_function"
4. VM exit, host runs again
5. Host might make some "cleanup" function calls
6. Host-side: RET from run_kvm_guest()

Now, when back on the host, there are a couple of possible scenarios of
post-guest activity the host needs to do before executing host code:

* on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not
touched and Linux has to do a 32-entry stuffing.

* on eIBRS hardware, VM exit with IBRS enabled, or restoring the host
IBRS=1 shortly after VM exit, has a documented side effect of flushing
the RSB except in this PBRSB situation where the software needs to stuff
the last RSB entry "by hand".

IOW, with eIBRS supported, host RET instructions should no longer be
influenced by guest behavior after the host retires a single CALL
instruction.

However, if the RET instructions are "unbalanced" with CALLs after a VM
exit as is the RET in #6, it might speculatively use the address for the
instruction after the CALL in #3 as an RSB prediction. This is a problem
since the (untrusted) guest controls this address.

Balanced CALL/RET instruction pairs such as in step #5 are not affected.

== Solution ==

The PBRSB issue affects a wide variety of Intel processors which
support eIBRS. But not all of them need mitigation. Today,
X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates
PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e.,
eIBRS systems which enable legacy IBRS explicitly.

However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT
and most of them need a new mitigation.

Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE
which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT.

The lighter-weight mitigation performs a CALL instruction which is
immediately followed by a speculative execution barrier (INT3). This
steers speculative execution to the barrier -- just like a retpoline
-- which ensures that speculation can never reach an unbalanced RET.
Then, ensure this CALL is retired before continuing execution with an
LFENCE.

In other words, the window of exposure is opened at VM exit where RET
behavior is troublesome. While the window is open, force RSB predictions
sampling for RET targets to a dead end at the INT3. Close the window
with the LFENCE.

There is a subset of eIBRS systems which are not vulnerable to PBRSB.
Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB.
Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO.

  [ bp: Massage, incorporate review comments from Andy Cooper. ]

Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-11 13:06:47 +02:00
..
accounting
arch x86/speculation: Add RSB VM Exit protections 2022-08-11 13:06:47 +02:00
bootconfig tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh 2021-09-26 14:08:59 +02:00
bpf tools/resolve_btfids: Do not print any commands when building silently 2022-02-08 18:30:39 +01:00
build tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts 2022-04-13 21:01:10 +02:00
cgroup tools/cgroup/slabinfo.py: updated to work on current kernel 2021-05-07 11:04:31 +02:00
debugging
edid
firewire
firmware
gpio tools: gpio: fix %llu warning in gpio-watch.c 2021-01-27 11:55:20 +01:00
hv
iio
include selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads 2022-08-11 13:06:44 +02:00
io_uring tools/io_uring: fix compile breakage 2020-09-21 07:50:58 -06:00
kvm/kvm_stat tools/kvm_stat: fix display of error when multiple processes are found 2022-08-11 13:06:45 +02:00
laptop
leds
lib libbpf: Fix logic for finding matching program for CO-RE relocation 2022-06-09 10:21:03 +02:00
memory-model
objtool objtool: Fix elf_create_undef_symbol() endianness 2022-07-25 11:26:56 +02:00
pci
pcmcia
perf perf symbol: Correct address for bss symbols 2022-08-03 12:00:49 +02:00
power tools/power turbostat: fix ICX DRAM power numbers 2022-06-09 10:20:51 +02:00
scripts tools: Allow proper CC/CXX/... override with LLVM=1 in Makefile.include 2021-07-31 08:16:10 +02:00
spi
testing selftests: KVM: Handle compiler optimizations in ucall 2022-08-11 13:06:45 +02:00
thermal/tmon tools/thermal/tmon: Add cross compiling support 2021-09-18 13:40:07 +02:00
time
usb usb: testusb: Fix for showing the connection speed 2021-10-09 14:40:56 +02:00
virtio tools/virtio: compile with -pthread 2022-05-25 09:17:53 +02:00
vm tools/vm/page-types: remove dependency on opt_file for idle page tracking 2021-10-09 14:40:57 +02:00
wmi
Makefile