linux-stable/Documentation/hwmon/lm70.rst
Christian Lamparter cd929672a9 hwmon: (lm70) Add ti,tmp125 support
The TMP125 is a 2 degree Celsius accurate Digital
Temperature Sensor with a SPI interface.

The temperature register is a 16-bit, read-only register.
The MSB (Bit 15) is a leading zero and never set. Bits 14
to 5 are the 1+9 temperature data bits in a two's
complement format. Bits 4 to 0 are useless copies of
Bit 5 value and therefore ignored.

This was tested on a Aerohive HiveAP-350.

Bonus: lm70 supports TMP122/TMP124 as well.
I added them to the Kconfig module description.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27 17:03:19 -08:00

69 lines
2 KiB
ReStructuredText

Kernel driver lm70
==================
Supported chips:
* National Semiconductor LM70
Datasheet: http://www.national.com/pf/LM/LM70.html
* Texas Instruments TMP121/TMP123
Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html
* Texas Instruments TMP122/TMP124
Information: https://www.ti.com/product/tmp122
* Texas Instruments TMP125
Information: https://www.ti.com/product/tmp125
* National Semiconductor LM71
Datasheet: https://www.ti.com/product/LM71
* National Semiconductor LM74
Datasheet: https://www.ti.com/product/LM74
Author:
Kaiwan N Billimoria <kaiwan@designergraphix.com>
Description
-----------
This driver implements support for the National Semiconductor LM70
temperature sensor.
The LM70 temperature sensor chip supports a single temperature sensor.
It communicates with a host processor (or microcontroller) via an
SPI/Microwire Bus interface.
Communication with the LM70 is simple: when the temperature is to be sensed,
the driver accesses the LM70 using SPI communication: 16 SCLK cycles
comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
complement digital temperature (sent via the SIO line), is available in the
driver for interpretation. This driver makes use of the kernel's in-core
SPI support.
As a real (in-tree) example of this "SPI protocol driver" interfacing
with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c
and its associated documentation.
The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is
13-bit temperature data (0.0625 degrees celsius resolution).
The TMP122/TMP124 also feature configurable temperature thresholds.
The TMP125 is less accurate and provides 10-bit temperature data
with 0.25 degrees Celsius resolution.
The LM71 is also very similar; main difference is 14-bit temperature
data (0.03125 degrees celsius resolution).
Thanks to
---------
Jean Delvare <jdelvare@suse.de> for mentoring the hwmon-side driver
development.