linux-stable/drivers/rtc/rtc-mxc.c
Fabio Estevam f78e3d407a rtc: mxc: Silence a clang warning
Change the of_device_get_match_data() cast to (uintptr_t)
to silence the following clang warning:

drivers/rtc/rtc-mxc.c:315:19: warning: cast to smaller integer type 'enum imx_rtc_type' from 'const void *' [-Wvoid-pointer-to-enum-cast]

Reported-by: kernel test robot <lkp@intel.com>
Fixes: ba7aa63000 ("rtc: mxc: use of_device_get_match_data")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220526011459.1167197-1-festevam@gmail.com
2022-06-01 23:19:17 +02:00

428 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0+
//
// Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
#include <linux/io.h>
#include <linux/rtc.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeirq.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_device.h>
#define RTC_INPUT_CLK_32768HZ (0x00 << 5)
#define RTC_INPUT_CLK_32000HZ (0x01 << 5)
#define RTC_INPUT_CLK_38400HZ (0x02 << 5)
#define RTC_SW_BIT (1 << 0)
#define RTC_ALM_BIT (1 << 2)
#define RTC_1HZ_BIT (1 << 4)
#define RTC_2HZ_BIT (1 << 7)
#define RTC_SAM0_BIT (1 << 8)
#define RTC_SAM1_BIT (1 << 9)
#define RTC_SAM2_BIT (1 << 10)
#define RTC_SAM3_BIT (1 << 11)
#define RTC_SAM4_BIT (1 << 12)
#define RTC_SAM5_BIT (1 << 13)
#define RTC_SAM6_BIT (1 << 14)
#define RTC_SAM7_BIT (1 << 15)
#define PIT_ALL_ON (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
#define RTC_ENABLE_BIT (1 << 7)
#define MAX_PIE_NUM 9
#define MAX_PIE_FREQ 512
#define MXC_RTC_TIME 0
#define MXC_RTC_ALARM 1
#define RTC_HOURMIN 0x00 /* 32bit rtc hour/min counter reg */
#define RTC_SECOND 0x04 /* 32bit rtc seconds counter reg */
#define RTC_ALRM_HM 0x08 /* 32bit rtc alarm hour/min reg */
#define RTC_ALRM_SEC 0x0C /* 32bit rtc alarm seconds reg */
#define RTC_RTCCTL 0x10 /* 32bit rtc control reg */
#define RTC_RTCISR 0x14 /* 32bit rtc interrupt status reg */
#define RTC_RTCIENR 0x18 /* 32bit rtc interrupt enable reg */
#define RTC_STPWCH 0x1C /* 32bit rtc stopwatch min reg */
#define RTC_DAYR 0x20 /* 32bit rtc days counter reg */
#define RTC_DAYALARM 0x24 /* 32bit rtc day alarm reg */
#define RTC_TEST1 0x28 /* 32bit rtc test reg 1 */
#define RTC_TEST2 0x2C /* 32bit rtc test reg 2 */
#define RTC_TEST3 0x30 /* 32bit rtc test reg 3 */
enum imx_rtc_type {
IMX1_RTC,
IMX21_RTC,
};
struct rtc_plat_data {
struct rtc_device *rtc;
void __iomem *ioaddr;
int irq;
struct clk *clk_ref;
struct clk *clk_ipg;
struct rtc_time g_rtc_alarm;
enum imx_rtc_type devtype;
};
static const struct of_device_id imx_rtc_dt_ids[] = {
{ .compatible = "fsl,imx1-rtc", .data = (const void *)IMX1_RTC },
{ .compatible = "fsl,imx21-rtc", .data = (const void *)IMX21_RTC },
{}
};
MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
static inline int is_imx1_rtc(struct rtc_plat_data *data)
{
return data->devtype == IMX1_RTC;
}
/*
* This function is used to obtain the RTC time or the alarm value in
* second.
*/
static time64_t get_alarm_or_time(struct device *dev, int time_alarm)
{
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
void __iomem *ioaddr = pdata->ioaddr;
u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
switch (time_alarm) {
case MXC_RTC_TIME:
day = readw(ioaddr + RTC_DAYR);
hr_min = readw(ioaddr + RTC_HOURMIN);
sec = readw(ioaddr + RTC_SECOND);
break;
case MXC_RTC_ALARM:
day = readw(ioaddr + RTC_DAYALARM);
hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
sec = readw(ioaddr + RTC_ALRM_SEC);
break;
}
hr = hr_min >> 8;
min = hr_min & 0xff;
return ((((time64_t)day * 24 + hr) * 60) + min) * 60 + sec;
}
/*
* This function sets the RTC alarm value or the time value.
*/
static void set_alarm_or_time(struct device *dev, int time_alarm, time64_t time)
{
u32 tod, day, hr, min, sec, temp;
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
void __iomem *ioaddr = pdata->ioaddr;
day = div_s64_rem(time, 86400, &tod);
/* time is within a day now */
hr = tod / 3600;
tod -= hr * 3600;
/* time is within an hour now */
min = tod / 60;
sec = tod - min * 60;
temp = (hr << 8) + min;
switch (time_alarm) {
case MXC_RTC_TIME:
writew(day, ioaddr + RTC_DAYR);
writew(sec, ioaddr + RTC_SECOND);
writew(temp, ioaddr + RTC_HOURMIN);
break;
case MXC_RTC_ALARM:
writew(day, ioaddr + RTC_DAYALARM);
writew(sec, ioaddr + RTC_ALRM_SEC);
writew(temp, ioaddr + RTC_ALRM_HM);
break;
}
}
/*
* This function updates the RTC alarm registers and then clears all the
* interrupt status bits.
*/
static void rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
{
time64_t time;
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
void __iomem *ioaddr = pdata->ioaddr;
time = rtc_tm_to_time64(alrm);
/* clear all the interrupt status bits */
writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
set_alarm_or_time(dev, MXC_RTC_ALARM, time);
}
static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
unsigned int enabled)
{
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
void __iomem *ioaddr = pdata->ioaddr;
u32 reg;
unsigned long flags;
spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
reg = readw(ioaddr + RTC_RTCIENR);
if (enabled)
reg |= bit;
else
reg &= ~bit;
writew(reg, ioaddr + RTC_RTCIENR);
spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
}
/* This function is the RTC interrupt service routine. */
static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
u32 status;
u32 events = 0;
spin_lock(&pdata->rtc->irq_lock);
status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
/* clear interrupt sources */
writew(status, ioaddr + RTC_RTCISR);
/* update irq data & counter */
if (status & RTC_ALM_BIT) {
events |= (RTC_AF | RTC_IRQF);
/* RTC alarm should be one-shot */
mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0);
}
if (status & PIT_ALL_ON)
events |= (RTC_PF | RTC_IRQF);
rtc_update_irq(pdata->rtc, 1, events);
spin_unlock(&pdata->rtc->irq_lock);
return IRQ_HANDLED;
}
static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
return 0;
}
/*
* This function reads the current RTC time into tm in Gregorian date.
*/
static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
time64_t val;
/* Avoid roll-over from reading the different registers */
do {
val = get_alarm_or_time(dev, MXC_RTC_TIME);
} while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
rtc_time64_to_tm(val, tm);
return 0;
}
/*
* This function sets the internal RTC time based on tm in Gregorian date.
*/
static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
time64_t time = rtc_tm_to_time64(tm);
/* Avoid roll-over from reading the different registers */
do {
set_alarm_or_time(dev, MXC_RTC_TIME, time);
} while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
return 0;
}
/*
* This function reads the current alarm value into the passed in 'alrm'
* argument. It updates the alrm's pending field value based on the whether
* an alarm interrupt occurs or not.
*/
static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
void __iomem *ioaddr = pdata->ioaddr;
rtc_time64_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
return 0;
}
/*
* This function sets the RTC alarm based on passed in alrm.
*/
static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rtc_plat_data *pdata = dev_get_drvdata(dev);
rtc_update_alarm(dev, &alrm->time);
memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
return 0;
}
/* RTC layer */
static const struct rtc_class_ops mxc_rtc_ops = {
.read_time = mxc_rtc_read_time,
.set_time = mxc_rtc_set_time,
.read_alarm = mxc_rtc_read_alarm,
.set_alarm = mxc_rtc_set_alarm,
.alarm_irq_enable = mxc_rtc_alarm_irq_enable,
};
static void mxc_rtc_action(void *p)
{
struct rtc_plat_data *pdata = p;
clk_disable_unprepare(pdata->clk_ref);
clk_disable_unprepare(pdata->clk_ipg);
}
static int mxc_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct rtc_plat_data *pdata = NULL;
u32 reg;
unsigned long rate;
int ret;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
pdata->devtype = (uintptr_t)of_device_get_match_data(&pdev->dev);
pdata->ioaddr = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pdata->ioaddr))
return PTR_ERR(pdata->ioaddr);
rtc = devm_rtc_allocate_device(&pdev->dev);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
pdata->rtc = rtc;
rtc->ops = &mxc_rtc_ops;
if (is_imx1_rtc(pdata)) {
struct rtc_time tm;
/* 9bit days + hours minutes seconds */
rtc->range_max = (1 << 9) * 86400 - 1;
/*
* Set the start date as beginning of the current year. This can
* be overridden using device tree.
*/
rtc_time64_to_tm(ktime_get_real_seconds(), &tm);
rtc->start_secs = mktime64(tm.tm_year, 1, 1, 0, 0, 0);
rtc->set_start_time = true;
} else {
/* 16bit days + hours minutes seconds */
rtc->range_max = (1 << 16) * 86400ULL - 1;
}
pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(pdata->clk_ipg)) {
dev_err(&pdev->dev, "unable to get ipg clock!\n");
return PTR_ERR(pdata->clk_ipg);
}
ret = clk_prepare_enable(pdata->clk_ipg);
if (ret)
return ret;
pdata->clk_ref = devm_clk_get(&pdev->dev, "ref");
if (IS_ERR(pdata->clk_ref)) {
clk_disable_unprepare(pdata->clk_ipg);
dev_err(&pdev->dev, "unable to get ref clock!\n");
return PTR_ERR(pdata->clk_ref);
}
ret = clk_prepare_enable(pdata->clk_ref);
if (ret) {
clk_disable_unprepare(pdata->clk_ipg);
return ret;
}
ret = devm_add_action_or_reset(&pdev->dev, mxc_rtc_action, pdata);
if (ret)
return ret;
rate = clk_get_rate(pdata->clk_ref);
if (rate == 32768)
reg = RTC_INPUT_CLK_32768HZ;
else if (rate == 32000)
reg = RTC_INPUT_CLK_32000HZ;
else if (rate == 38400)
reg = RTC_INPUT_CLK_38400HZ;
else {
dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
return -EINVAL;
}
reg |= RTC_ENABLE_BIT;
writew(reg, (pdata->ioaddr + RTC_RTCCTL));
if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
dev_err(&pdev->dev, "hardware module can't be enabled!\n");
return -EIO;
}
platform_set_drvdata(pdev, pdata);
/* Configure and enable the RTC */
pdata->irq = platform_get_irq(pdev, 0);
if (pdata->irq >= 0 &&
devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
IRQF_SHARED, pdev->name, pdev) < 0) {
dev_warn(&pdev->dev, "interrupt not available.\n");
pdata->irq = -1;
}
if (pdata->irq >= 0) {
device_init_wakeup(&pdev->dev, 1);
ret = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
if (ret)
dev_err(&pdev->dev, "failed to enable irq wake\n");
}
ret = devm_rtc_register_device(rtc);
return ret;
}
static struct platform_driver mxc_rtc_driver = {
.driver = {
.name = "mxc_rtc",
.of_match_table = imx_rtc_dt_ids,
},
.probe = mxc_rtc_probe,
};
module_platform_driver(mxc_rtc_driver)
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
MODULE_DESCRIPTION("RTC driver for Freescale MXC");
MODULE_LICENSE("GPL");