Mark Brown 41609ff430 [ARM] 5449/1: S3C: Use disable_irq_nosync() to fix boot lockups ... With 2.6.30-rc1 on SMDK6410 I experience a soft lockup on bootup when the Samsung serial driver attempts to disable the transmit interrupt from within the transmit interrupt handler: it calls disable_irq() which locks up due to attempting to synchronise with the running handler. Fix this by using disable_irq_nosync(). Also make the same change in the recieve path. Backtrace: [<c002a914>] (__irq_svc+0x34/0x80) from [<c00696c0>] (synchr) [<c00696c0>] (synchronize_irq+0xc/0xcc) from [<c018d434>] (s) [<c018d434>] (s3c24xx_serial_stop_tx+0x1c/0x3c) from [<c018d) [<c018d54c>] (s3c24xx_serial_tx_chars+0xf8/0x104) from [<c00) [<c0068bcc>] (handle_IRQ_event+0x74/0x118) from [<c006ab04>]) [<c006ab04>] (handle_level_irq+0x100/0x118) from [<c00349c4>) [<c00349c4>] (s3c_irq_demux_uart+0x94/0xc4) from [<c002a050>) [<c002a050>] (_text+0x50/0x6c) from [<c002a914>] (__irq_svc+) Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2009-04-15 10:01:02 +01:00
..
cpm_uart	cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.	2009-04-06 09:09:33 -05:00
jsm	tty: jsm cleanups	2009-04-07 08:44:06 -07:00
8250.c	8250: fix boot hang with serial console when using with Serial Over Lan port	2009-02-20 17:57:50 -08:00
8250.h
8250_accent.c
8250_acorn.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c	make probe_serial_gsc() static	2008-10-20 08:52:36 -07:00
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c	8250: Fix warning	2009-04-06 14:36:43 -07:00
8250_pnp.c	serial: Update PNP IDs	2009-04-06 14:36:26 -07:00
21285.c	[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h	2009-03-25 10:21:35 +00:00
68328serial.c
68328serial.h
68360serial.c
amba-pl010.c	[ARM] amba drivers: don't pass a consumer clock name for devices with unique clocks	2008-11-30 17:38:14 +00:00
amba-pl011.c	[ARM] amba drivers: don't pass a consumer clock name for devices with unique clocks	2008-11-30 17:38:14 +00:00
atmel_serial.c	avr32: add hardware handshake support to atmel_serial	2009-04-01 16:13:51 +02:00
bfin_5xx.c	tty: Blackin CTS/RTS	2009-04-07 08:44:05 -07:00
bfin_sport_uart.c	__FUNCTION__ is gcc-specific, use __func__	2009-01-02 10:19:42 -08:00
bfin_sport_uart.h
clps711x.c	[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h	2009-03-25 10:21:35 +00:00
crisv10.c	tty: Use the generic RS485 ioctl on CRIS	2009-04-07 08:44:05 -07:00
crisv10.h	tty: Use the generic RS485 ioctl on CRIS	2009-04-07 08:44:05 -07:00
dz.c
dz.h
icom.c	icom: remove unused variables	2009-04-06 14:36:37 -07:00
icom.h
imx.c	[ARM] MXC: remove _clk suffix from clock names	2009-03-13 10:33:48 +01:00
ioc3_serial.c	[IA64] Fix section mismatch ioc3uart_init()/ioc3uart_submodule	2008-12-09 10:08:51 -08:00
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig	Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze	2009-04-13 08:17:52 -07:00
kgdboc.c
m32r_sio.c
m32r_sio.h
m32r_sio_reg.h
Makefile	Add support for the MAX3100 SPI UART.	2009-04-07 08:44:05 -07:00
max3100.c	tty: MAX3100	2009-04-08 14:33:38 -07:00
mcf.c	m68knommu: Fix support for console port other than ttyS0 on mcf.c	2009-03-24 15:17:43 +10:00
mpc52xx_uart.c	powerpc/5200: Don't specify IRQF_SHARED in PSC UART driver	2009-02-04 11:23:56 -07:00
mpsc.c
mux.c
netx-serial.c	[ARM] build fixes for netX serial driver	2008-10-30 09:41:59 +01:00
nwpserial.c	serial: Add driver for the Cell Network Processor serial port NWP device	2009-01-08 16:25:18 +11:00
of_serial.c	serial: Add 16850 uart type support to OF uart driver	2009-01-16 16:15:17 +11:00
pmac_zilog.c	powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook	2009-04-07 15:07:43 +10:00
pmac_zilog.h
pnx8xxx_uart.c	When a break signal is detected, the next character should be ignored.	2009-01-15 12:48:36 -08:00
pxa.c	[ARM] pxa: remove machine class specific stuffs from serial driver	2009-03-09 21:22:38 +08:00
s3c24a0.c	[ARM] S3C24A0: Serial port definitions and driver support.	2008-12-15 21:46:36 +00:00
s3c2400.c
s3c2410.c
s3c2412.c
s3c2440.c	drivers/serial/s3c2440.c: fix typo in MODULE_LICENSE	2008-12-10 08:01:53 -08:00
s3c6400.c	[ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCs	2008-12-15 21:58:11 +00:00
sa1100.c	[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h	2009-03-25 10:21:35 +00:00
samsung.c	[ARM] 5449/1: S3C: Use disable_irq_nosync() to fix boot lockups	2009-04-15 10:01:02 +01:00
samsung.h	[ARM] S3C: Update serial driver IRQ handling	2008-12-15 23:02:39 +00:00
sb1250-duart.c
sc26xx.c
serial_core.c	serial: fixup /proc/tty/driver/serial after proc_fops conversion	2009-04-01 14:50:48 -07:00
serial_cs.c
serial_ks8695.c
serial_lh7a40x.c	[ARM] lh7a40x: avoid polluting the kernel's namespace	2008-11-28 16:39:04 +00:00
serial_txx9.c	serial_txx9: use %lx for iobase	2008-10-20 08:50:24 -07:00
sh-sci.c	sh: Add support for SH7786 CPU subtype.	2009-03-03 15:40:25 +09:00
sh-sci.h	sh: Add support for SH7786 CPU subtype.	2009-03-03 15:40:25 +09:00
sn_console.c	Altix serial: fix	2008-10-20 08:52:36 -07:00
suncore.c
suncore.h
sunhv.c
sunsab.c
sunsab.h
sunsu.c	serial: sunsu: sunsu_kbd_ms_init needs to be __devinit	2009-04-08 03:29:03 -07:00
sunzilog.c	serial: struct device - replace bus_id with dev_name(), dev_set_name()	2009-03-24 16:38:21 -07:00
sunzilog.h
uartlite.c	powerpc/virtex: fix various format/casting printk mismatches	2008-11-14 09:59:48 -07:00
ucc_uart.c	ucc: Fix leaky error path	2009-04-06 14:36:32 -07:00
vr41xx_siu.c
zs.c
zs.h