linux-stable/drivers/media/tuners/qm1d1c0042.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

456 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Sharp QM1D1C0042 8PSK tuner driver
*
* Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com>
*/
/*
* NOTICE:
* As the disclosed information on the chip is very limited,
* this driver lacks some features, including chip config like IF freq.
* It assumes that users of this driver (such as a PCI bridge of
* DTV receiver cards) know the relevant info and
* configure the chip via I2C if necessary.
*
* Currently, PT3 driver is the only one that uses this driver,
* and contains init/config code in its firmware.
* Thus some part of the code might be dependent on PT3 specific config.
*/
#include <linux/kernel.h>
#include <linux/math64.h>
#include "qm1d1c0042.h"
#define QM1D1C0042_NUM_REGS 0x20
#define QM1D1C0042_NUM_REG_ROWS 2
static const u8
reg_initval[QM1D1C0042_NUM_REG_ROWS][QM1D1C0042_NUM_REGS] = { {
0x48, 0x1c, 0xa0, 0x10, 0xbc, 0xc5, 0x20, 0x33,
0x06, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
0x00, 0xff, 0xf3, 0x00, 0x2a, 0x64, 0xa6, 0x86,
0x8c, 0xcf, 0xb8, 0xf1, 0xa8, 0xf2, 0x89, 0x00
}, {
0x68, 0x1c, 0xc0, 0x10, 0xbc, 0xc1, 0x11, 0x33,
0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,
0x00, 0xff, 0xf3, 0x00, 0x3f, 0x25, 0x5c, 0xd6,
0x55, 0xcf, 0x95, 0xf6, 0x36, 0xf2, 0x09, 0x00
}
};
static int reg_index;
static const struct qm1d1c0042_config default_cfg = {
.xtal_freq = 16000,
.lpf = 1,
.fast_srch = 0,
.lpf_wait = 20,
.fast_srch_wait = 4,
.normal_srch_wait = 15,
};
struct qm1d1c0042_state {
struct qm1d1c0042_config cfg;
struct i2c_client *i2c;
u8 regs[QM1D1C0042_NUM_REGS];
};
static struct qm1d1c0042_state *cfg_to_state(struct qm1d1c0042_config *c)
{
return container_of(c, struct qm1d1c0042_state, cfg);
}
static int reg_write(struct qm1d1c0042_state *state, u8 reg, u8 val)
{
u8 wbuf[2] = { reg, val };
int ret;
ret = i2c_master_send(state->i2c, wbuf, sizeof(wbuf));
if (ret >= 0 && ret < sizeof(wbuf))
ret = -EIO;
return (ret == sizeof(wbuf)) ? 0 : ret;
}
static int reg_read(struct qm1d1c0042_state *state, u8 reg, u8 *val)
{
struct i2c_msg msgs[2] = {
{
.addr = state->i2c->addr,
.flags = 0,
.buf = &reg,
.len = 1,
},
{
.addr = state->i2c->addr,
.flags = I2C_M_RD,
.buf = val,
.len = 1,
},
};
int ret;
ret = i2c_transfer(state->i2c->adapter, msgs, ARRAY_SIZE(msgs));
if (ret >= 0 && ret < ARRAY_SIZE(msgs))
ret = -EIO;
return (ret == ARRAY_SIZE(msgs)) ? 0 : ret;
}
static int qm1d1c0042_set_srch_mode(struct qm1d1c0042_state *state, bool fast)
{
if (fast)
state->regs[0x03] |= 0x01; /* set fast search mode */
else
state->regs[0x03] &= ~0x01 & 0xff;
return reg_write(state, 0x03, state->regs[0x03]);
}
static int qm1d1c0042_wakeup(struct qm1d1c0042_state *state)
{
int ret;
state->regs[0x01] |= 1 << 3; /* BB_Reg_enable */
state->regs[0x01] &= (~(1 << 0)) & 0xff; /* NORMAL (wake-up) */
state->regs[0x05] &= (~(1 << 3)) & 0xff; /* pfd_rst NORMAL */
ret = reg_write(state, 0x01, state->regs[0x01]);
if (ret == 0)
ret = reg_write(state, 0x05, state->regs[0x05]);
if (ret < 0)
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
__func__, state->cfg.fe->dvb->num, state->cfg.fe->id);
return ret;
}
/* tuner_ops */
static int qm1d1c0042_set_config(struct dvb_frontend *fe, void *priv_cfg)
{
struct qm1d1c0042_state *state;
struct qm1d1c0042_config *cfg;
state = fe->tuner_priv;
cfg = priv_cfg;
if (cfg->fe)
state->cfg.fe = cfg->fe;
if (cfg->xtal_freq != QM1D1C0042_CFG_XTAL_DFLT)
dev_warn(&state->i2c->dev,
"(%s) changing xtal_freq not supported. ", __func__);
state->cfg.xtal_freq = default_cfg.xtal_freq;
state->cfg.lpf = cfg->lpf;
state->cfg.fast_srch = cfg->fast_srch;
if (cfg->lpf_wait != QM1D1C0042_CFG_WAIT_DFLT)
state->cfg.lpf_wait = cfg->lpf_wait;
else
state->cfg.lpf_wait = default_cfg.lpf_wait;
if (cfg->fast_srch_wait != QM1D1C0042_CFG_WAIT_DFLT)
state->cfg.fast_srch_wait = cfg->fast_srch_wait;
else
state->cfg.fast_srch_wait = default_cfg.fast_srch_wait;
if (cfg->normal_srch_wait != QM1D1C0042_CFG_WAIT_DFLT)
state->cfg.normal_srch_wait = cfg->normal_srch_wait;
else
state->cfg.normal_srch_wait = default_cfg.normal_srch_wait;
return 0;
}
/* divisor, vco_band parameters */
/* {maxfreq, param1(band?), param2(div?) */
static const u32 conv_table[9][3] = {
{ 2151000, 1, 7 },
{ 1950000, 1, 6 },
{ 1800000, 1, 5 },
{ 1600000, 1, 4 },
{ 1450000, 1, 3 },
{ 1250000, 1, 2 },
{ 1200000, 0, 7 },
{ 975000, 0, 6 },
{ 950000, 0, 0 }
};
static int qm1d1c0042_set_params(struct dvb_frontend *fe)
{
struct qm1d1c0042_state *state;
u32 freq;
int i, ret;
u8 val, mask;
u32 a, sd;
s32 b;
state = fe->tuner_priv;
freq = fe->dtv_property_cache.frequency;
state->regs[0x08] &= 0xf0;
state->regs[0x08] |= 0x09;
state->regs[0x13] &= 0x9f;
state->regs[0x13] |= 0x20;
/* div2/vco_band */
val = state->regs[0x02] & 0x0f;
for (i = 0; i < 8; i++)
if (freq < conv_table[i][0] && freq >= conv_table[i + 1][0]) {
val |= conv_table[i][1] << 7;
val |= conv_table[i][2] << 4;
break;
}
ret = reg_write(state, 0x02, val);
if (ret < 0)
return ret;
a = DIV_ROUND_CLOSEST(freq, state->cfg.xtal_freq);
state->regs[0x06] &= 0x40;
state->regs[0x06] |= (a - 12) / 4;
ret = reg_write(state, 0x06, state->regs[0x06]);
if (ret < 0)
return ret;
state->regs[0x07] &= 0xf0;
state->regs[0x07] |= (a - 4 * ((a - 12) / 4 + 1) - 5) & 0x0f;
ret = reg_write(state, 0x07, state->regs[0x07]);
if (ret < 0)
return ret;
/* LPF */
val = state->regs[0x08];
if (state->cfg.lpf) {
/* LPF_CLK, LPF_FC */
val &= 0xf0;
val |= 0x02;
}
ret = reg_write(state, 0x08, val);
if (ret < 0)
return ret;
/*
* b = (freq / state->cfg.xtal_freq - a) << 20;
* sd = b (b >= 0)
* 1<<22 + b (b < 0)
*/
b = (s32)div64_s64(((s64) freq) << 20, state->cfg.xtal_freq)
- (((s64) a) << 20);
if (b >= 0)
sd = b;
else
sd = (1 << 22) + b;
state->regs[0x09] &= 0xc0;
state->regs[0x09] |= (sd >> 16) & 0x3f;
state->regs[0x0a] = (sd >> 8) & 0xff;
state->regs[0x0b] = sd & 0xff;
ret = reg_write(state, 0x09, state->regs[0x09]);
if (ret == 0)
ret = reg_write(state, 0x0a, state->regs[0x0a]);
if (ret == 0)
ret = reg_write(state, 0x0b, state->regs[0x0b]);
if (ret != 0)
return ret;
if (!state->cfg.lpf) {
/* CSEL_Offset */
ret = reg_write(state, 0x13, state->regs[0x13]);
if (ret < 0)
return ret;
}
/* VCO_TM, LPF_TM */
mask = state->cfg.lpf ? 0x3f : 0x7f;
val = state->regs[0x0c] & mask;
ret = reg_write(state, 0x0c, val);
if (ret < 0)
return ret;
usleep_range(2000, 3000);
val = state->regs[0x0c] | ~mask;
ret = reg_write(state, 0x0c, val);
if (ret < 0)
return ret;
if (state->cfg.lpf)
msleep(state->cfg.lpf_wait);
else if (state->regs[0x03] & 0x01)
msleep(state->cfg.fast_srch_wait);
else
msleep(state->cfg.normal_srch_wait);
if (state->cfg.lpf) {
/* LPF_FC */
ret = reg_write(state, 0x08, 0x09);
if (ret < 0)
return ret;
/* CSEL_Offset */
ret = reg_write(state, 0x13, state->regs[0x13]);
if (ret < 0)
return ret;
}
return 0;
}
static int qm1d1c0042_sleep(struct dvb_frontend *fe)
{
struct qm1d1c0042_state *state;
int ret;
state = fe->tuner_priv;
state->regs[0x01] &= (~(1 << 3)) & 0xff; /* BB_Reg_disable */
state->regs[0x01] |= 1 << 0; /* STDBY */
state->regs[0x05] |= 1 << 3; /* pfd_rst STANDBY */
ret = reg_write(state, 0x05, state->regs[0x05]);
if (ret == 0)
ret = reg_write(state, 0x01, state->regs[0x01]);
if (ret < 0)
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
__func__, fe->dvb->num, fe->id);
return ret;
}
static int qm1d1c0042_init(struct dvb_frontend *fe)
{
struct qm1d1c0042_state *state;
u8 val;
int i, ret;
state = fe->tuner_priv;
reg_write(state, 0x01, 0x0c);
reg_write(state, 0x01, 0x0c);
ret = reg_write(state, 0x01, 0x0c); /* soft reset on */
if (ret < 0)
goto failed;
usleep_range(2000, 3000);
ret = reg_write(state, 0x01, 0x1c); /* soft reset off */
if (ret < 0)
goto failed;
/* check ID and choose initial registers corresponding ID */
ret = reg_read(state, 0x00, &val);
if (ret < 0)
goto failed;
for (reg_index = 0; reg_index < QM1D1C0042_NUM_REG_ROWS;
reg_index++) {
if (val == reg_initval[reg_index][0x00])
break;
}
if (reg_index >= QM1D1C0042_NUM_REG_ROWS) {
ret = -EINVAL;
goto failed;
}
memcpy(state->regs, reg_initval[reg_index], QM1D1C0042_NUM_REGS);
usleep_range(2000, 3000);
state->regs[0x0c] |= 0x40;
ret = reg_write(state, 0x0c, state->regs[0x0c]);
if (ret < 0)
goto failed;
msleep(state->cfg.lpf_wait);
/* set all writable registers */
for (i = 1; i <= 0x0c ; i++) {
ret = reg_write(state, i, state->regs[i]);
if (ret < 0)
goto failed;
}
for (i = 0x11; i < QM1D1C0042_NUM_REGS; i++) {
ret = reg_write(state, i, state->regs[i]);
if (ret < 0)
goto failed;
}
ret = qm1d1c0042_wakeup(state);
if (ret < 0)
goto failed;
ret = qm1d1c0042_set_srch_mode(state, state->cfg.fast_srch);
if (ret < 0)
goto failed;
return ret;
failed:
dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n",
__func__, fe->dvb->num, fe->id);
return ret;
}
/* I2C driver functions */
static const struct dvb_tuner_ops qm1d1c0042_ops = {
.info = {
.name = "Sharp QM1D1C0042",
.frequency_min_hz = 950 * MHz,
.frequency_max_hz = 2150 * MHz,
},
.init = qm1d1c0042_init,
.sleep = qm1d1c0042_sleep,
.set_config = qm1d1c0042_set_config,
.set_params = qm1d1c0042_set_params,
};
static int qm1d1c0042_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct qm1d1c0042_state *state;
struct qm1d1c0042_config *cfg;
struct dvb_frontend *fe;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
state->i2c = client;
cfg = client->dev.platform_data;
fe = cfg->fe;
fe->tuner_priv = state;
qm1d1c0042_set_config(fe, cfg);
memcpy(&fe->ops.tuner_ops, &qm1d1c0042_ops, sizeof(qm1d1c0042_ops));
i2c_set_clientdata(client, &state->cfg);
dev_info(&client->dev, "Sharp QM1D1C0042 attached.\n");
return 0;
}
static void qm1d1c0042_remove(struct i2c_client *client)
{
struct qm1d1c0042_state *state;
state = cfg_to_state(i2c_get_clientdata(client));
state->cfg.fe->tuner_priv = NULL;
kfree(state);
}
static const struct i2c_device_id qm1d1c0042_id[] = {
{"qm1d1c0042", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, qm1d1c0042_id);
static struct i2c_driver qm1d1c0042_driver = {
.driver = {
.name = "qm1d1c0042",
},
.probe = qm1d1c0042_probe,
.remove = qm1d1c0042_remove,
.id_table = qm1d1c0042_id,
};
module_i2c_driver(qm1d1c0042_driver);
MODULE_DESCRIPTION("Sharp QM1D1C0042 tuner");
MODULE_AUTHOR("Akihiro TSUKADA");
MODULE_LICENSE("GPL");