linux-stable/drivers/iio/humidity/hts221_buffer.c
Greg Kroah-Hartman 2a3c8f8a44 IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA
 safety alignment issue identified due to improved understanding of
 the restrictions as a result of Catalin Marinas' efforts in that area.
 
 One immutable branch in here due to MFD and SPMI elements needed for
 the qcom-rradc driver.
 
 Device support
 * bmi088
   - Add support for bmi085 (accelerometer part of IMU)
   - Add support for bmi090l (accelerometer part of IMU)
 * mcp4922
   - Add support for single channel device MCP4921
 * rzg2l-adc
   - Add compatible and minor tweaks to support RZ/G2UL ADC
 * sca3300
   - Add support for scl3300 including refactoring driver to support
     multiple device types and cleanup noticed whilst working on driver.
 * spmi-rradc
   - New driver for Qualcomm SPMI Round Robin ADC including necessary
     additional utility functions in SPMI core and related MFD driver.
 * ti-dac55781
   - Add compatible for DAC121C081 which is very similar to existing parts.
 
 Features
 * core
   - Warn on iio_trigger_get() on an unregistered IIO trigger.
 * bma400
   - Triggered buffer support
   - Activity and step counting
   - Misc driver improvements such as devm and header ordering
 * cm32181
   - Add PM support.
 * cros_ec
   - Sensor location support
 * sx9324
   - Add precharge resistor setting
   - Add internal compensation resistor setting
   - Add CS idle/sleep mode.
 * sx9360
   - Add precharge resistor setting
 * vl53l0x
   - Handle reset GPIO, regulator and relax handling of irq type.
 
 Cleanup and minor fixes:
 
 Treewide changes
 - Cleanup of error handling in remove functions in many drivers.
 - Update dt-binding maintainers for a number of ADI bindings.
 - Several sets of conversion of drivers from device tree specific to
   generic device properties. Includes fixing up various related
   header and Kconfig issues.
 - Drop include of of.h from iio.h and fix up drivers that need to include
   it directly.
 - More moves of clusters of drivers into appropriate IIO_XXX namespaces.
 - Tree wide fix of a long running bug around DMA safety requirements.
   IIO was using __cacheline_aligned to pad iio_priv() structures. This
   worked for a long time by coincidence, but correct alignment is
   ARCH_KMALLOC_MINALIGN.  As there is activity around this area, introduce
   an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
   than every driver in future. Note, there have been no reports of this
   bug in the wild, and it may not happen on any platforms supported by
   upstream, so no rush to backport these fixes.
 
 Other cleanup
 * core
   - Switch to ida_alloc()/free()
   - Drop unused iio_get_time_res()
   - Octal permissions and DEVICE_ATTR_* macros.
   - Cleanup bared unsigned usage.
 * MAINTAINERS
   - Add include/dt-bindings/iio/ to the main IIO entry.
 * ad5380
   - Comment syntax fix.
 * ad74413r
   - Call to for_each_set_bit_from(), with from value as 0 replaced.
 * ad7768-1
   - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
 * adxl345
   - Fix wrong address in dt-binding example.
 * adxl367
   - Drop extra update of FIFO watermark.
 * at91-sama5d2
   - Limit requested watermark to the hwfifo size.
 * bmg160, bme680
   - Typos
 * cio-dac
   - Switch to iomap rather than direct use of ioports
 * kxsd9
   - Replace CONFIG_PM guards with new PM macros that let the compiler
     cleanly remove the unused code and structures when !CONFIG_PM
 * lsm6dsx
   - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
     to Namespace.
 * meson_saradc - general cleanup.
   - Avoid attaching resources to iio_dev->dev
   - Use same struct device for all error messages
   - Convert to dev_err_probe() and use local struct device *dev to
     reduce code complexity.
   - Use devm_clk_get_optional() instead of hand rolling.
   - Use regmap_read_poll_timeout() instead of hand rolling.
 * mma7660
   - Drop ACPI_PTR() use that is unhelpful.
 * mpu3050
   - Stop exporting symbols not used outside of module
   - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
 * ping
   - Typo fix
 * qcom-spmi-rradc
   - Typo fix
 * sc27xx
   - Convert to generic struct u32_fract
 * srf08
   - Drop a redundant check on !val
 * st_lsm6dsx
   - Limit the requested watermark to the hwfifo size.
 * stm32-adc
   - Use generic_handle_domain_irq() instead of opencoding.
   - Fix handling of ADC disable.
 * stm32-dac
   - Use str_enabled_disable() instead of open coding.
 * stx104
   - Switch to iomap rather than direct use of ioports
 * tsc2046
   - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
 * tsl2563
   - Replace flush_scheduled_work() with cancel_delayed_work_sync()
   - Replace cancel_delayed_work() with cancel_delayed_work_sync()
 * vl53l0x
   - Make the VDD regulator optional by allowing a dummy regulator.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmLQBwARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FohMHRAAi3nPM3IchXe886olumRgX5ke75vU+FNT
 sqQjqlpl6X7j5yNLU+HF6lC7zg3QzDnfWJ3Uo4C7s2sW7zO0997lkFx4jvF3yW9y
 0nLDgYm1Y1te/qR84BE355pMEsYEJVZyPI/Z8UfuBh6IfnSDeTE5ZwCvlRMAchtp
 AX+j1114FQvZ8yfdIlFjlN4vYSxCGgEZzfWYhpch/Jv1y2Q0L17bpv/KWGt1AYaF
 VugmKoNTM3WzIABBNGWQ4l4ZVVuVpuiVUL90AKv6Qf+yDSqw94tuIM0NZpJ1rqLr
 7tH568m7Eewh7zBp88PRB9XDiZVERvzdVQaT22+wlX+Vhn/SKeoK8PPpdLWD1YyG
 hXB0p+FGKncoKKgK1w9L7qRRNmsQDHowNHYMSjnzeBuyGQyEqwAXzNvvbiCqHh8y
 7b8GW+CYo7//wIarg74Xl+/4LwdCGcMUJNuTm1efEgC7yGToY7JD63DNo3sylaII
 bfoT06/yogaay/rVLZs5n+MvDONaDt4AbTTErG48s0TzqD/O8Ys85AF0IvKwQ80N
 WMxe4y+gdJ6VuU+ww9+6WdUzxnx+5gt+ZA2iLxZFekOIUi3Tj+q47F+17Jvwyt7U
 2wQzdtvNhHPwD5CqYpxD4iH/z5YFCtIHKjmUsVyAWGVbeuSS/QvFzpf39YWxBWO+
 W1w6RStUbXo=
 =IcsE
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features and minor fixes for 5.20

Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.

One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.

Device support
* bmi088
  - Add support for bmi085 (accelerometer part of IMU)
  - Add support for bmi090l (accelerometer part of IMU)
* mcp4922
  - Add support for single channel device MCP4921
* rzg2l-adc
  - Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
  - Add support for scl3300 including refactoring driver to support
    multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
  - New driver for Qualcomm SPMI Round Robin ADC including necessary
    additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
  - Add compatible for DAC121C081 which is very similar to existing parts.

Features
* core
  - Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
  - Triggered buffer support
  - Activity and step counting
  - Misc driver improvements such as devm and header ordering
* cm32181
  - Add PM support.
* cros_ec
  - Sensor location support
* sx9324
  - Add precharge resistor setting
  - Add internal compensation resistor setting
  - Add CS idle/sleep mode.
* sx9360
  - Add precharge resistor setting
* vl53l0x
  - Handle reset GPIO, regulator and relax handling of irq type.

Cleanup and minor fixes:

Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
  generic device properties. Includes fixing up various related
  header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
  it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
  IIO was using __cacheline_aligned to pad iio_priv() structures. This
  worked for a long time by coincidence, but correct alignment is
  ARCH_KMALLOC_MINALIGN.  As there is activity around this area, introduce
  an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
  than every driver in future. Note, there have been no reports of this
  bug in the wild, and it may not happen on any platforms supported by
  upstream, so no rush to backport these fixes.

Other cleanup
* core
  - Switch to ida_alloc()/free()
  - Drop unused iio_get_time_res()
  - Octal permissions and DEVICE_ATTR_* macros.
  - Cleanup bared unsigned usage.
* MAINTAINERS
  - Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
  - Comment syntax fix.
* ad74413r
  - Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
  - Fix wrong address in dt-binding example.
* adxl367
  - Drop extra update of FIFO watermark.
* at91-sama5d2
  - Limit requested watermark to the hwfifo size.
* bmg160, bme680
  - Typos
* cio-dac
  - Switch to iomap rather than direct use of ioports
* kxsd9
  - Replace CONFIG_PM guards with new PM macros that let the compiler
    cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
  - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
    to Namespace.
* meson_saradc - general cleanup.
  - Avoid attaching resources to iio_dev->dev
  - Use same struct device for all error messages
  - Convert to dev_err_probe() and use local struct device *dev to
    reduce code complexity.
  - Use devm_clk_get_optional() instead of hand rolling.
  - Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
  - Drop ACPI_PTR() use that is unhelpful.
* mpu3050
  - Stop exporting symbols not used outside of module
  - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
  - Typo fix
* qcom-spmi-rradc
  - Typo fix
* sc27xx
  - Convert to generic struct u32_fract
* srf08
  - Drop a redundant check on !val
* st_lsm6dsx
  - Limit the requested watermark to the hwfifo size.
* stm32-adc
  - Use generic_handle_domain_irq() instead of opencoding.
  - Fix handling of ADC disable.
* stm32-dac
  - Use str_enabled_disable() instead of open coding.
* stx104
  - Switch to iomap rather than direct use of ioports
* tsc2046
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
  - Replace flush_scheduled_work() with cancel_delayed_work_sync()
  - Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
  - Make the VDD regulator optional by allowing a dummy regulator.

* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
  iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
  iio: adc: xilinx-xadc: Make use of device properties
  iio: light: cm32181: Add PM support
  iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: stm32-adc: disable adc before calibration
  iio: adc: stm32-adc: make safe adc disable
  iio: dac: ad5380: align '*' each line and drop unneeded blank line
  iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
  iio: Don't use bare "unsigned"
  dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
  iio: dac: mcp4922: add support to mcp4921
  iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
  iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
  iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
  iio: adc: stm32-adc: Use generic_handle_domain_irq()
  proximity: vl53l0x: Make VDD regulator actually optional
  MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
  dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
  iio: gyro: bmg160: Fix typo in comment
  ...
2022-07-14 15:04:49 +02:00

205 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* STMicroelectronics hts221 sensor driver
*
* Copyright 2016 STMicroelectronics Inc.
*
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/irqreturn.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/bitfield.h>
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
#include <linux/iio/events.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/buffer.h>
#include <linux/platform_data/st_sensors_pdata.h>
#include "hts221.h"
#define HTS221_REG_DRDY_HL_ADDR 0x22
#define HTS221_REG_DRDY_HL_MASK BIT(7)
#define HTS221_REG_DRDY_PP_OD_ADDR 0x22
#define HTS221_REG_DRDY_PP_OD_MASK BIT(6)
#define HTS221_REG_DRDY_EN_ADDR 0x22
#define HTS221_REG_DRDY_EN_MASK BIT(2)
#define HTS221_REG_STATUS_ADDR 0x27
#define HTS221_RH_DRDY_MASK BIT(1)
#define HTS221_TEMP_DRDY_MASK BIT(0)
static int hts221_trig_set_state(struct iio_trigger *trig, bool state)
{
struct iio_dev *iio_dev = iio_trigger_get_drvdata(trig);
struct hts221_hw *hw = iio_priv(iio_dev);
return regmap_update_bits(hw->regmap, HTS221_REG_DRDY_EN_ADDR,
HTS221_REG_DRDY_EN_MASK,
FIELD_PREP(HTS221_REG_DRDY_EN_MASK, state));
}
static const struct iio_trigger_ops hts221_trigger_ops = {
.set_trigger_state = hts221_trig_set_state,
};
static irqreturn_t hts221_trigger_handler_thread(int irq, void *private)
{
struct hts221_hw *hw = private;
int err, status;
err = regmap_read(hw->regmap, HTS221_REG_STATUS_ADDR, &status);
if (err < 0)
return IRQ_HANDLED;
/*
* H_DA bit (humidity data available) is routed to DRDY line.
* Humidity sample is computed after temperature one.
* Here we can assume data channels are both available if H_DA bit
* is set in status register
*/
if (!(status & HTS221_RH_DRDY_MASK))
return IRQ_NONE;
iio_trigger_poll_chained(hw->trig);
return IRQ_HANDLED;
}
int hts221_allocate_trigger(struct iio_dev *iio_dev)
{
struct hts221_hw *hw = iio_priv(iio_dev);
struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev);
bool irq_active_low = false, open_drain = false;
unsigned long irq_type;
int err;
irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
switch (irq_type) {
case IRQF_TRIGGER_HIGH:
case IRQF_TRIGGER_RISING:
break;
case IRQF_TRIGGER_LOW:
case IRQF_TRIGGER_FALLING:
irq_active_low = true;
break;
default:
dev_info(hw->dev,
"mode %lx unsupported, using IRQF_TRIGGER_RISING\n",
irq_type);
irq_type = IRQF_TRIGGER_RISING;
break;
}
err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_HL_ADDR,
HTS221_REG_DRDY_HL_MASK,
FIELD_PREP(HTS221_REG_DRDY_HL_MASK,
irq_active_low));
if (err < 0)
return err;
if (device_property_read_bool(hw->dev, "drive-open-drain") ||
(pdata && pdata->open_drain)) {
irq_type |= IRQF_SHARED;
open_drain = true;
}
err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_PP_OD_ADDR,
HTS221_REG_DRDY_PP_OD_MASK,
FIELD_PREP(HTS221_REG_DRDY_PP_OD_MASK,
open_drain));
if (err < 0)
return err;
err = devm_request_threaded_irq(hw->dev, hw->irq, NULL,
hts221_trigger_handler_thread,
irq_type | IRQF_ONESHOT,
hw->name, hw);
if (err) {
dev_err(hw->dev, "failed to request trigger irq %d\n",
hw->irq);
return err;
}
hw->trig = devm_iio_trigger_alloc(hw->dev, "%s-trigger",
iio_dev->name);
if (!hw->trig)
return -ENOMEM;
iio_trigger_set_drvdata(hw->trig, iio_dev);
hw->trig->ops = &hts221_trigger_ops;
err = devm_iio_trigger_register(hw->dev, hw->trig);
iio_dev->trig = iio_trigger_get(hw->trig);
return err;
}
static int hts221_buffer_preenable(struct iio_dev *iio_dev)
{
return hts221_set_enable(iio_priv(iio_dev), true);
}
static int hts221_buffer_postdisable(struct iio_dev *iio_dev)
{
return hts221_set_enable(iio_priv(iio_dev), false);
}
static const struct iio_buffer_setup_ops hts221_buffer_ops = {
.preenable = hts221_buffer_preenable,
.postdisable = hts221_buffer_postdisable,
};
static irqreturn_t hts221_buffer_handler_thread(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *iio_dev = pf->indio_dev;
struct hts221_hw *hw = iio_priv(iio_dev);
struct iio_chan_spec const *ch;
int err;
/* humidity data */
ch = &iio_dev->channels[HTS221_SENSOR_H];
err = regmap_bulk_read(hw->regmap, ch->address,
&hw->scan.channels[0],
sizeof(hw->scan.channels[0]));
if (err < 0)
goto out;
/* temperature data */
ch = &iio_dev->channels[HTS221_SENSOR_T];
err = regmap_bulk_read(hw->regmap, ch->address,
&hw->scan.channels[1],
sizeof(hw->scan.channels[1]));
if (err < 0)
goto out;
iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan,
iio_get_time_ns(iio_dev));
out:
iio_trigger_notify_done(hw->trig);
return IRQ_HANDLED;
}
int hts221_allocate_buffers(struct iio_dev *iio_dev)
{
struct hts221_hw *hw = iio_priv(iio_dev);
return devm_iio_triggered_buffer_setup(hw->dev, iio_dev,
NULL, hts221_buffer_handler_thread,
&hts221_buffer_ops);
}
MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
MODULE_DESCRIPTION("STMicroelectronics hts221 buffer driver");
MODULE_LICENSE("GPL v2");