..
am35x.c
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
blackfin.c
usb: musb: Pass fifo_mode in platform data
2014-11-25 08:47:07 -06:00
blackfin.h
cppi_dma.c
cppi_dma.h
da8xx.c
usb: musb: Pass fifo_mode in platform data
2014-11-25 08:47:07 -06:00
davinci.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
davinci.h
jz4740.c
usb: musb: Pass fifo_mode in platform data
2014-11-25 08:47:07 -06:00
Kconfig
usb: musb: Allow multiple glue layers to be built in
2014-11-25 08:47:07 -06:00
Makefile
usb: musb: add support for JZ4740 usb device controller
2013-12-20 09:53:24 -06:00
musb_am335x.c
usb: musb: Fix panic upon musb_am335x module removal
2014-06-27 10:53:06 -05:00
musb_core.c
Driver core patches for 3.19-rc1
2014-12-14 16:10:09 -08:00
musb_core.h
usb: musb: Use IS_ENABLED for tusb6010
2014-11-25 08:47:07 -06:00
musb_cppi41.c
usb: musb: musb_cppi41: recognize HS devices in hostmode
2014-11-18 09:35:14 -06:00
musb_debug.h
musb_debugfs.c
usb: musb: debugfs: cope with blackfin's oddities
2014-12-22 10:24:08 -06:00
musb_dma.h
usb: musb: introduce dma_channel.rx_packet_done
2014-06-30 14:26:24 -05:00
musb_dsps.c
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
musb_gadget.c
usb: musb: gadget: use udc-core's reset notifier
2014-11-10 17:19:34 -06:00
musb_gadget.h
musb_gadget_ep0.c
musb_host.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
musb_host.h
usb: musb: fix prototype for musb_port_reset
2013-12-20 15:05:43 -06:00
musb_io.h
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
musb_regs.h
usb: musb: Use IS_ENABLED for tusb6010
2014-11-25 08:47:07 -06:00
musb_virthub.c
usb: musb: try a race-free wakeup
2014-11-05 13:26:41 -06:00
musbhsdma.c
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
musbhsdma.h
omap2430.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
omap2430.h
tusb6010.c
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
tusb6010.h
usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.
2014-05-16 12:16:31 -05:00
tusb6010_omap.c
usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.
2014-05-16 12:16:31 -05:00
ux500.c
usb: musb: Pass fifo_mode in platform data
2014-11-25 08:47:07 -06:00
ux500_dma.c
usb: musb: Change to use new IO access
2014-11-25 08:47:06 -06:00