Ben Widawsky 472b1ce6e9 cxl/mem: Enable commands via CEL ... CXL devices identified by the memory-device class code must implement the Device Command Interface (described in 8.2.9 of the CXL 2.0 spec). While the driver already maintains a list of commands it supports, there is still a need to be able to distinguish between commands that the driver knows about from commands that are optionally supported by the hardware. The Command Effects Log (CEL) is specified in the CXL 2.0 specification. The CEL is one of two types of logs, the other being vendor specific. They are distinguished in hardware/spec via UUID. The CEL is useful for 2 things: 1. Determine which optional commands are supported by the CXL device. 2. Enumerate any vendor specific commands The CEL is used by the driver to determine which commands are available in the hardware and therefore which commands userspace is allowed to execute. The set of enabled commands might be a subset of commands which are advertised in UAPI via CXL_MEM_SEND_COMMAND IOCTL. With the CEL enabling comes a internal flag to indicate a base set of commands that are enabled regardless of CEL. Such commands are required for basic interaction with the hardware and thus can be useful in debug cases, for example if the CEL is corrupted. The implementation leaves the statically defined table of commands and supplements it with a bitmap to determine commands that are enabled. This organization was chosen for the following reasons: - Smaller memory footprint. Doesn't need a table per device. - Reduce memory allocation complexity. - Fixed command IDs to opcode mapping for all devices makes development and debugging easier. - Certain helpers are easily achievable, like cxl_for_each_cmd(). Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v3) Link: https://lore.kernel.org/r/20210217040958.1354670-7-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>		2021-02-16 20:36:38 -08:00
..
bus.c	cxl/mem: Register CXL memX devices	2021-02-16 20:36:38 -08:00
cxl.h	cxl/mem: Enable commands via CEL	2021-02-16 20:36:38 -08:00
Kconfig	cxl/mem: Add a "RAW" send command	2021-02-16 20:36:38 -08:00
Makefile	cxl/mem: Register CXL memX devices	2021-02-16 20:36:38 -08:00
mem.c	cxl/mem: Enable commands via CEL	2021-02-16 20:36:38 -08:00
pci.h