linux-stable/drivers/usb/host/ohci-exynos.c
Greg Kroah-Hartman 4811f53fad usb: xceiv: patches for v3.9 merge window
Two new PHY drivers coming here: one for Samsung,
 one for OMAP. Both architectures are adding USB3
 support to mainline kernel.
 
 The PHY layer now allows us to have mulitple PHYs
 of the same type, which is necessary for platforms
 which provide more than one USB peripheral port.
 
 There's also a few cleanups here: removal of __dev*
 annotations, conversion of a cast to to_delayed_work(),
 and mxs-phy learns about ->set_suspend.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRAqlWAAoJEIaOsuA1yqREo+0P/AnevihQnUfh1WlICZeHvQMR
 +XwSZGVlZYMTiThFldDOsV0ZpngMWW7y7iNc/YjCTyYr1skRjdYahRAc9YZtz2aR
 2aIdIbdt6gS4wthPhMUGdeGlGuXngmrFCKeo7xD8RQQgeJecGqrD/y629fAfnq0Z
 /bCOq+BKj3R9oLOVKtBCOE+j4KQKJSDkywz4GRaZ5yyOmn55Ci/FNJH6EAoGQC5Q
 D1j+PyhlVpqW/XESn9ceRdXIG9i4a9b3PwKFNbO3iCfaLh5JGTW67pTZ+A7+XNcz
 iT3+WibsZIAF6ya/Eu/1NcBgj8an6rhuRN/Nu7GTIOxwZNuKbqpYfuOXf1/StTiJ
 rwmPQ4mh3PzqbLSfe4+H3SIkj8IZCh6NuPiREAwge2HGxOSY7FSIdQSGV6jOqa7F
 7Qi3K9aFMqJYAkhEelPfNtZZhK1fVlQTn+t/q4Zr7r593xpV1Ur73Kn3EwGDBcM3
 5hyKo9DC1Gr1KXtf1B/hzojnMWqmT5BxJhFBSsw7Nj1F0fUaA3G15+vkanvUSWRV
 /wP8pjZD44T/bguion7LSdscX98S4fCTJSf571UYymmVGKejfpYI0wRWearVbrhm
 cwdONVyIt0EFqX2gd2pthx2SBTTOEetb5ssqSKXRBCTDiApjdAPdejVGk3iblw7C
 LOydELt71ER/o2RNVR+h
 =c796
 -----END PGP SIGNATURE-----

Merge tag 'xceiv-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:
	usb: xceiv: patches for v3.9 merge window

	Two new PHY drivers coming here: one for Samsung,
	one for OMAP. Both architectures are adding USB3
	support to mainline kernel.

	The PHY layer now allows us to have mulitple PHYs
	of the same type, which is necessary for platforms
	which provide more than one USB peripheral port.

	There's also a few cleanups here: removal of __dev*
	annotations, conversion of a cast to to_delayed_work(),
	and mxs-phy learns about ->set_suspend.
2013-01-25 09:09:46 -08:00

332 lines
7.8 KiB
C

/*
* SAMSUNG EXYNOS USB HOST OHCI Controller
*
* Copyright (C) 2011 Samsung Electronics Co.Ltd
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-exynos.h>
#include <linux/usb/phy.h>
#include <linux/usb/samsung_usb_phy.h>
#include <plat/usb-phy.h>
struct exynos_ohci_hcd {
struct device *dev;
struct usb_hcd *hcd;
struct clk *clk;
struct usb_phy *phy;
struct usb_otg *otg;
struct exynos4_ohci_platdata *pdata;
};
static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci)
{
struct platform_device *pdev = to_platform_device(exynos_ohci->dev);
if (exynos_ohci->phy)
usb_phy_init(exynos_ohci->phy);
else if (exynos_ohci->pdata->phy_init)
exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST);
}
static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci)
{
struct platform_device *pdev = to_platform_device(exynos_ohci->dev);
if (exynos_ohci->phy)
usb_phy_shutdown(exynos_ohci->phy);
else if (exynos_ohci->pdata->phy_exit)
exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST);
}
static int ohci_exynos_reset(struct usb_hcd *hcd)
{
return ohci_init(hcd_to_ohci(hcd));
}
static int ohci_exynos_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
ret = ohci_run(ohci);
if (ret < 0) {
dev_err(hcd->self.controller, "can't start %s\n",
hcd->self.bus_name);
ohci_stop(hcd);
return ret;
}
return 0;
}
static const struct hc_driver exynos_ohci_hc_driver = {
.description = hcd_name,
.product_desc = "EXYNOS OHCI Host Controller",
.hcd_priv_size = sizeof(struct ohci_hcd),
.irq = ohci_irq,
.flags = HCD_MEMORY|HCD_USB11,
.reset = ohci_exynos_reset,
.start = ohci_exynos_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
.get_frame_number = ohci_get_frame,
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
static int exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
struct exynos_ohci_hcd *exynos_ohci;
struct usb_hcd *hcd;
struct ohci_hcd *ohci;
struct resource *res;
struct usb_phy *phy;
int irq;
int err;
/*
* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &ohci_exynos_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
exynos_ohci = devm_kzalloc(&pdev->dev, sizeof(struct exynos_ohci_hcd),
GFP_KERNEL);
if (!exynos_ohci)
return -ENOMEM;
phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(phy)) {
/* Fallback to pdata */
if (!pdata) {
dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
return -EPROBE_DEFER;
} else {
exynos_ohci->pdata = pdata;
}
} else {
exynos_ohci->phy = phy;
exynos_ohci->otg = phy->otg;
}
exynos_ohci->dev = &pdev->dev;
hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
return -ENOMEM;
}
exynos_ohci->hcd = hcd;
exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost");
if (IS_ERR(exynos_ohci->clk)) {
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
err = PTR_ERR(exynos_ohci->clk);
goto fail_clk;
}
err = clk_prepare_enable(exynos_ohci->clk);
if (err)
goto fail_clk;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get I/O memory\n");
err = -ENXIO;
goto fail_io;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "Failed to remap I/O memory\n");
err = -ENOMEM;
goto fail_io;
}
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "Failed to get IRQ\n");
err = -ENODEV;
goto fail_io;
}
if (exynos_ohci->otg)
exynos_ohci->otg->set_host(exynos_ohci->otg,
&exynos_ohci->hcd->self);
exynos_ohci_phy_enable(exynos_ohci);
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");
goto fail_add_hcd;
}
platform_set_drvdata(pdev, exynos_ohci);
return 0;
fail_add_hcd:
exynos_ohci_phy_disable(exynos_ohci);
fail_io:
clk_disable_unprepare(exynos_ohci->clk);
fail_clk:
usb_put_hcd(hcd);
return err;
}
static int exynos_ohci_remove(struct platform_device *pdev)
{
struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = exynos_ohci->hcd;
usb_remove_hcd(hcd);
if (exynos_ohci->otg)
exynos_ohci->otg->set_host(exynos_ohci->otg,
&exynos_ohci->hcd->self);
exynos_ohci_phy_disable(exynos_ohci);
clk_disable_unprepare(exynos_ohci->clk);
usb_put_hcd(hcd);
return 0;
}
static void exynos_ohci_shutdown(struct platform_device *pdev)
{
struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = exynos_ohci->hcd;
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
#ifdef CONFIG_PM
static int exynos_ohci_suspend(struct device *dev)
{
struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
struct usb_hcd *hcd = exynos_ohci->hcd;
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
unsigned long flags;
int rc = 0;
/*
* Root hub was already suspended. Disable irq emission and
* mark HW unaccessible, bail out if RH has been resumed. Use
* the spinlock to properly synchronize with possible pending
* RH suspend or resume activity.
*/
spin_lock_irqsave(&ohci->lock, flags);
if (ohci->rh_state != OHCI_RH_SUSPENDED &&
ohci->rh_state != OHCI_RH_HALTED) {
rc = -EINVAL;
goto fail;
}
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
if (exynos_ohci->otg)
exynos_ohci->otg->set_host(exynos_ohci->otg,
&exynos_ohci->hcd->self);
exynos_ohci_phy_disable(exynos_ohci);
clk_disable_unprepare(exynos_ohci->clk);
fail:
spin_unlock_irqrestore(&ohci->lock, flags);
return rc;
}
static int exynos_ohci_resume(struct device *dev)
{
struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
struct usb_hcd *hcd = exynos_ohci->hcd;
clk_prepare_enable(exynos_ohci->clk);
if (exynos_ohci->otg)
exynos_ohci->otg->set_host(exynos_ohci->otg,
&exynos_ohci->hcd->self);
exynos_ohci_phy_enable(exynos_ohci);
ohci_resume(hcd, false);
return 0;
}
#else
#define exynos_ohci_suspend NULL
#define exynos_ohci_resume NULL
#endif
static const struct dev_pm_ops exynos_ohci_pm_ops = {
.suspend = exynos_ohci_suspend,
.resume = exynos_ohci_resume,
};
#ifdef CONFIG_OF
static const struct of_device_id exynos_ohci_match[] = {
{ .compatible = "samsung,exynos4210-ohci" },
{},
};
MODULE_DEVICE_TABLE(of, exynos_ohci_match);
#endif
static struct platform_driver exynos_ohci_driver = {
.probe = exynos_ohci_probe,
.remove = exynos_ohci_remove,
.shutdown = exynos_ohci_shutdown,
.driver = {
.name = "exynos-ohci",
.owner = THIS_MODULE,
.pm = &exynos_ohci_pm_ops,
.of_match_table = of_match_ptr(exynos_ohci_match),
}
};
MODULE_ALIAS("platform:exynos-ohci");
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");