linux-stable/drivers/tty
Peter Collingbourne b8073c069a serial: Lock console when calling into driver before registration
[ Upstream commit 801410b26a ]

During the handoff from earlycon to the real console driver, we have
two separate drivers operating on the same device concurrently. In the
case of the 8250 driver these concurrent accesses cause problems due
to the driver's use of banked registers, controlled by LCR.DLAB. It is
possible for the setup(), config_port(), pm() and set_mctrl() callbacks
to set DLAB, which can cause the earlycon code that intends to access
TX to instead access DLL, leading to missed output and corruption on
the serial line due to unintended modifications to the baud rate.

In particular, for setup() we have:

univ8250_console_setup()
-> serial8250_console_setup()
-> uart_set_options()
-> serial8250_set_termios()
-> serial8250_do_set_termios()
-> serial8250_do_set_divisor()

For config_port() we have:

serial8250_config_port()
-> autoconfig()

For pm() we have:

serial8250_pm()
-> serial8250_do_pm()
-> serial8250_set_sleep()

For set_mctrl() we have (for some devices):

serial8250_set_mctrl()
-> omap8250_set_mctrl()
-> __omap8250_set_mctrl()

To avoid such problems, let's make it so that the console is locked
during pre-registration calls to these callbacks, which will prevent
the earlycon driver from running concurrently.

Remove the partial solution to this problem in the 8250 driver
that locked the console only during autoconfig_irq(), as this would
result in a deadlock with the new approach. The console continues
to be locked during autoconfig_irq() because it can only be called
through uart_configure_port().

Although this patch introduces more locking than strictly necessary
(and in particular it also locks during the call to rs485_config()
which is not affected by this issue as far as I can tell), it follows
the principle that it is the responsibility of the generic console
code to manage the earlycon handoff by ensuring that earlycon and real
console driver code cannot run concurrently, and not the individual
drivers.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://linux-review.googlesource.com/id/I7cf8124dcebf8618e6b2ee543fa5b25532de55d8
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240304214350.501253-1-pcc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03 15:19:31 +02:00
..
hvc hvc/xen: fix event channel handling for secondary consoles 2023-11-28 17:07:08 +00:00
ipwireless
serdev
serial serial: Lock console when calling into driver before registration 2024-04-03 15:19:31 +02:00
vt tty: vt: fix 20 vs 0x20 typo in EScsiignore 2024-03-26 18:20:57 -04:00
amiserial.c
ehv_bytechan.c
goldfish.c
Kconfig
Makefile
mips_ejtag_fdc.c
moxa.c
mxser.c
n_gsm.c tty: n_gsm: fix race condition in status line change on dead connections 2023-11-08 14:11:03 +01:00
n_hdlc.c
n_null.c
n_tty.c
nozomi.c
pty.c
rpmsg_tty.c
synclink_gt.c
sysrq.c tty/sysrq: replace smp_processor_id() with get_cpu() 2023-11-28 17:07:08 +00:00
tty.h tty: change tty_write_lock()'s ndelay parameter to bool 2024-01-25 15:27:47 -08:00
tty_audit.c
tty_baudrate.c
tty_buffer.c
tty_io.c usb: cdc-acm: return correct error code on unsupported break 2024-01-25 15:27:47 -08:00
tty_ioctl.c tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE 2024-02-05 20:12:58 +00:00
tty_jobctrl.c tty: tty_jobctrl: fix pid memleak in disassociate_ctty() 2023-11-20 11:52:09 +01:00
tty_ldisc.c
tty_ldsem.c
tty_mutex.c
tty_port.c
ttynull.c
vcc.c tty: vcc: Add check for kstrdup() in vcc_probe() 2023-11-28 17:07:01 +00:00