mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-04 01:49:36 +00:00
![Michael Buesch](/assets/img/avatar_default.png)
SSB is an SoC bus used in a number of embedded devices. The most well-known of these devices is probably the Linksys WRT54G, but there are others as well. The bus is also used internally on the BCM43xx and BCM44xx devices from Broadcom. This patch also includes support for SSB ID tables in modules, so that SSB drivers can be loaded automatically. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
292 lines
14 KiB
C
292 lines
14 KiB
C
#ifndef LINUX_SSB_REGS_H_
|
|
#define LINUX_SSB_REGS_H_
|
|
|
|
|
|
/* SiliconBackplane Address Map.
|
|
* All regions may not exist on all chips.
|
|
*/
|
|
#define SSB_SDRAM_BASE 0x00000000U /* Physical SDRAM */
|
|
#define SSB_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */
|
|
#define SSB_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */
|
|
#define SSB_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */
|
|
#define SSB_ENUM_BASE 0x18000000U /* Enumeration space base */
|
|
#define SSB_ENUM_LIMIT 0x18010000U /* Enumeration space limit */
|
|
|
|
#define SSB_FLASH2 0x1c000000U /* Flash Region 2 (region 1 shadowed here) */
|
|
#define SSB_FLASH2_SZ 0x02000000U /* Size of Flash Region 2 */
|
|
|
|
#define SSB_EXTIF_BASE 0x1f000000U /* External Interface region base address */
|
|
#define SSB_FLASH1 0x1fc00000U /* Flash Region 1 */
|
|
#define SSB_FLASH1_SZ 0x00400000U /* Size of Flash Region 1 */
|
|
|
|
#define SSB_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */
|
|
#define SSB_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */
|
|
#define SSB_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
|
|
#define SSB_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
|
|
#define SSB_EUART (SSB_EXTIF_BASE + 0x00800000)
|
|
#define SSB_LED (SSB_EXTIF_BASE + 0x00900000)
|
|
|
|
|
|
/* Enumeration space constants */
|
|
#define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */
|
|
#define SSB_MAX_NR_CORES ((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
|
|
|
|
|
|
/* mips address */
|
|
#define SSB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */
|
|
|
|
|
|
/* SSB PCI config space registers. */
|
|
#define SSB_PMCSR 0x44
|
|
#define SSB_PE 0x100
|
|
#define SSB_BAR0_WIN 0x80 /* Backplane address space 0 */
|
|
#define SSB_BAR1_WIN 0x84 /* Backplane address space 1 */
|
|
#define SSB_SPROMCTL 0x88 /* SPROM control */
|
|
#define SSB_SPROMCTL_WE 0x10 /* SPROM write enable */
|
|
#define SSB_BAR1_CONTROL 0x8c /* Address space 1 burst control */
|
|
#define SSB_PCI_IRQS 0x90 /* PCI interrupts */
|
|
#define SSB_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
|
|
#define SSB_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
|
|
#define SSB_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
|
|
#define SSB_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
|
|
#define SSB_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
|
|
#define SSB_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
|
|
#define SSB_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
|
|
#define SSB_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
|
|
#define SSB_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
|
|
|
|
|
|
#define SSB_BAR0_MAX_RETRIES 50
|
|
|
|
/* Silicon backplane configuration register definitions */
|
|
#define SSB_IPSFLAG 0x0F08
|
|
#define SSB_IPSFLAG_IRQ1 0x0000003F /* which sbflags get routed to mips interrupt 1 */
|
|
#define SSB_IPSFLAG_IRQ1_SHIFT 0
|
|
#define SSB_IPSFLAG_IRQ2 0x00003F00 /* which sbflags get routed to mips interrupt 2 */
|
|
#define SSB_IPSFLAG_IRQ2_SHIFT 8
|
|
#define SSB_IPSFLAG_IRQ3 0x003F0000 /* which sbflags get routed to mips interrupt 3 */
|
|
#define SSB_IPSFLAG_IRQ3_SHIFT 16
|
|
#define SSB_IPSFLAG_IRQ4 0x3F000000 /* which sbflags get routed to mips interrupt 4 */
|
|
#define SSB_IPSFLAG_IRQ4_SHIFT 24
|
|
#define SSB_TPSFLAG 0x0F18
|
|
#define SSB_TPSFLAG_BPFLAG 0x0000003F /* Backplane flag # */
|
|
#define SSB_TPSFLAG_ALWAYSIRQ 0x00000040 /* IRQ is always sent on the Backplane */
|
|
#define SSB_TMERRLOGA 0x0F48
|
|
#define SSB_TMERRLOG 0x0F50
|
|
#define SSB_ADMATCH3 0x0F60
|
|
#define SSB_ADMATCH2 0x0F68
|
|
#define SSB_ADMATCH1 0x0F70
|
|
#define SSB_IMSTATE 0x0F90 /* SB Initiator Agent State */
|
|
#define SSB_IMSTATE_PC 0x0000000f /* Pipe Count */
|
|
#define SSB_IMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */
|
|
#define SSB_IMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */
|
|
#define SSB_IMSTATE_AP_TS 0x00000010 /* Use timeslices only */
|
|
#define SSB_IMSTATE_AP_TK 0x00000020 /* Use token only */
|
|
#define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */
|
|
#define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */
|
|
#define SSB_IMSTATE_TO 0x00040000 /* Timeout */
|
|
#define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */
|
|
#define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
|
|
#define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
|
|
#define SSB_INTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
|
|
#define SSB_INTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
|
|
#define SSB_INTVEC_USB 0x00000010 /* Enable interrupts for usb */
|
|
#define SSB_INTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
|
|
#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
|
|
#define SSB_TMSLOW 0x0F98 /* SB Target State Low */
|
|
#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
|
|
#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
|
|
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
|
|
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
|
|
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
|
|
#define SSB_TMSLOW_PE 0x40000000 /* Power Management Enable */
|
|
#define SSB_TMSLOW_BE 0x80000000 /* BIST Enable */
|
|
#define SSB_TMSHIGH 0x0F9C /* SB Target State High */
|
|
#define SSB_TMSHIGH_SERR 0x00000001 /* S-error */
|
|
#define SSB_TMSHIGH_INT 0x00000002 /* Interrupt */
|
|
#define SSB_TMSHIGH_BUSY 0x00000004 /* Busy */
|
|
#define SSB_TMSHIGH_TO 0x00000020 /* Timeout. Backplane rev >= 2.3 only */
|
|
#define SSB_TMSHIGH_COREFL 0x1FFF0000 /* Core specific flags */
|
|
#define SSB_TMSHIGH_COREFL_SHIFT 16
|
|
#define SSB_TMSHIGH_DMA64 0x10000000 /* 64bit DMA supported */
|
|
#define SSB_TMSHIGH_GCR 0x20000000 /* Gated Clock Request */
|
|
#define SSB_TMSHIGH_BISTF 0x40000000 /* BIST Failed */
|
|
#define SSB_TMSHIGH_BISTD 0x80000000 /* BIST Done */
|
|
#define SSB_BWA0 0x0FA0
|
|
#define SSB_IMCFGLO 0x0FA8
|
|
#define SSB_IMCFGLO_SERTO 0x00000007 /* Service timeout */
|
|
#define SSB_IMCFGLO_REQTO 0x00000070 /* Request timeout */
|
|
#define SSB_IMCFGLO_REQTO_SHIFT 4
|
|
#define SSB_IMCFGLO_CONNID 0x00FF0000 /* Connection ID */
|
|
#define SSB_IMCFGLO_CONNID_SHIFT 16
|
|
#define SSB_IMCFGHI 0x0FAC
|
|
#define SSB_ADMATCH0 0x0FB0
|
|
#define SSB_TMCFGLO 0x0FB8
|
|
#define SSB_TMCFGHI 0x0FBC
|
|
#define SSB_BCONFIG 0x0FC0
|
|
#define SSB_BSTATE 0x0FC8
|
|
#define SSB_ACTCFG 0x0FD8
|
|
#define SSB_FLAGST 0x0FE8
|
|
#define SSB_IDLOW 0x0FF8
|
|
#define SSB_IDLOW_CFGSP 0x00000003 /* Config Space */
|
|
#define SSB_IDLOW_ADDRNGE 0x00000038 /* Address Ranges supported */
|
|
#define SSB_IDLOW_ADDRNGE_SHIFT 3
|
|
#define SSB_IDLOW_SYNC 0x00000040
|
|
#define SSB_IDLOW_INITIATOR 0x00000080
|
|
#define SSB_IDLOW_MIBL 0x00000F00 /* Minimum Backplane latency */
|
|
#define SSB_IDLOW_MIBL_SHIFT 8
|
|
#define SSB_IDLOW_MABL 0x0000F000 /* Maximum Backplane latency */
|
|
#define SSB_IDLOW_MABL_SHIFT 12
|
|
#define SSB_IDLOW_TIF 0x00010000 /* This Initiator is first */
|
|
#define SSB_IDLOW_CCW 0x000C0000 /* Cycle counter width */
|
|
#define SSB_IDLOW_CCW_SHIFT 18
|
|
#define SSB_IDLOW_TPT 0x00F00000 /* Target ports */
|
|
#define SSB_IDLOW_TPT_SHIFT 20
|
|
#define SSB_IDLOW_INITP 0x0F000000 /* Initiator ports */
|
|
#define SSB_IDLOW_INITP_SHIFT 24
|
|
#define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */
|
|
#define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */
|
|
#define SSB_IDLOW_SSBREV_23 0x10000000 /* 2.3 */
|
|
#define SSB_IDHIGH 0x0FFC /* SB Identification High */
|
|
#define SSB_IDHIGH_RCLO 0x0000000F /* Revision Code (low part) */
|
|
#define SSB_IDHIGH_CC 0x00008FF0 /* Core Code */
|
|
#define SSB_IDHIGH_CC_SHIFT 4
|
|
#define SSB_IDHIGH_RCHI 0x00007000 /* Revision Code (high part) */
|
|
#define SSB_IDHIGH_RCHI_SHIFT 8 /* yes, shift 8 is right */
|
|
#define SSB_IDHIGH_VC 0xFFFF0000 /* Vendor Code */
|
|
#define SSB_IDHIGH_VC_SHIFT 16
|
|
|
|
/* SPROM shadow area. If not otherwise noted, fields are
|
|
* two bytes wide. Note that the SPROM can _only_ be read
|
|
* in two-byte quantinies.
|
|
*/
|
|
#define SSB_SPROMSIZE_WORDS 64
|
|
#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
|
|
#define SSB_SPROM_BASE 0x1000
|
|
#define SSB_SPROM_REVISION 0x107E
|
|
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
|
|
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
|
|
#define SSB_SPROM_REVISION_CRC_SHIFT 8
|
|
/* SPROM Revision 1 */
|
|
#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
|
|
#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
|
|
#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */
|
|
#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */
|
|
#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */
|
|
#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */
|
|
#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */
|
|
#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
|
|
#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
|
|
#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5
|
|
#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
|
|
#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
|
|
#define SSB_SPROM1_BINF 0x105C /* Board info */
|
|
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
|
|
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
|
|
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
|
|
#define SSB_SPROM1_BINF_ANTA 0x3000 /* Available A-PHY antennas */
|
|
#define SSB_SPROM1_BINF_ANTA_SHIFT 12
|
|
#define SSB_SPROM1_BINF_ANTBG 0xC000 /* Available B-PHY antennas */
|
|
#define SSB_SPROM1_BINF_ANTBG_SHIFT 14
|
|
#define SSB_SPROM1_PA0B0 0x105E
|
|
#define SSB_SPROM1_PA0B1 0x1060
|
|
#define SSB_SPROM1_PA0B2 0x1062
|
|
#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */
|
|
#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */
|
|
#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */
|
|
#define SSB_SPROM1_GPIOA_P1_SHIFT 8
|
|
#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */
|
|
#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */
|
|
#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */
|
|
#define SSB_SPROM1_GPIOB_P3_SHIFT 8
|
|
#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */
|
|
#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */
|
|
#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */
|
|
#define SSB_SPROM1_MAXPWR_A_SHIFT 8
|
|
#define SSB_SPROM1_PA1B0 0x106A
|
|
#define SSB_SPROM1_PA1B1 0x106C
|
|
#define SSB_SPROM1_PA1B2 0x106E
|
|
#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */
|
|
#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/
|
|
#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */
|
|
#define SSB_SPROM1_ITSSI_A_SHIFT 8
|
|
#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
|
|
#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
|
|
#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */
|
|
#define SSB_SPROM1_AGAIN_BG 0xFF00 /* B-PHY and G-PHY */
|
|
#define SSB_SPROM1_AGAIN_BG_SHIFT 8
|
|
#define SSB_SPROM1_OEM 0x1076 /* 8 bytes OEM string (rev 1 only) */
|
|
/* SPROM Revision 2 (inherits from rev 1) */
|
|
#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
|
|
#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
|
|
#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */
|
|
#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */
|
|
#define SSB_SPROM2_MAXP_A_LO_SHIFT 8
|
|
#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */
|
|
#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */
|
|
#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */
|
|
#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */
|
|
#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */
|
|
#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */
|
|
#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */
|
|
#define SSB_SPROM2_OPO_VALUE 0x00FF
|
|
#define SSB_SPROM2_OPO_UNUSED 0xFF00
|
|
#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
|
|
/* SPROM Revision 3 (inherits from rev 2) */
|
|
#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
|
|
#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
|
|
#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
|
|
#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
|
|
#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */
|
|
#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8
|
|
#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */
|
|
#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16
|
|
#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */
|
|
#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */
|
|
#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */
|
|
#define SSB_SPROM3_CCKPO_2M_SHIFT 4
|
|
#define SSB_SPROM3_CCKPO_55M 0x0F00 /* 5.5M Rate PO */
|
|
#define SSB_SPROM3_CCKPO_55M_SHIFT 8
|
|
#define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */
|
|
#define SSB_SPROM3_CCKPO_11M_SHIFT 12
|
|
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
|
|
|
|
/* Values for SSB_SPROM1_BINF_CCODE */
|
|
enum {
|
|
SSB_SPROM1CCODE_WORLD = 0,
|
|
SSB_SPROM1CCODE_THAILAND,
|
|
SSB_SPROM1CCODE_ISRAEL,
|
|
SSB_SPROM1CCODE_JORDAN,
|
|
SSB_SPROM1CCODE_CHINA,
|
|
SSB_SPROM1CCODE_JAPAN,
|
|
SSB_SPROM1CCODE_USA_CANADA_ANZ,
|
|
SSB_SPROM1CCODE_EUROPE,
|
|
SSB_SPROM1CCODE_USA_LOW,
|
|
SSB_SPROM1CCODE_JAPAN_HIGH,
|
|
SSB_SPROM1CCODE_ALL,
|
|
SSB_SPROM1CCODE_NONE,
|
|
};
|
|
|
|
/* Address-Match values and masks (SSB_ADMATCHxxx) */
|
|
#define SSB_ADM_TYPE 0x00000003 /* Address type */
|
|
#define SSB_ADM_TYPE0 0
|
|
#define SSB_ADM_TYPE1 1
|
|
#define SSB_ADM_TYPE2 2
|
|
#define SSB_ADM_AD64 0x00000004
|
|
#define SSB_ADM_SZ0 0x000000F8 /* Type0 size */
|
|
#define SSB_ADM_SZ0_SHIFT 3
|
|
#define SSB_ADM_SZ1 0x000001F8 /* Type1 size */
|
|
#define SSB_ADM_SZ1_SHIFT 3
|
|
#define SSB_ADM_SZ2 0x000001F8 /* Type2 size */
|
|
#define SSB_ADM_SZ2_SHIFT 3
|
|
#define SSB_ADM_EN 0x00000400 /* Enable */
|
|
#define SSB_ADM_NEG 0x00000800 /* Negative decode */
|
|
#define SSB_ADM_BASE0 0xFFFFFF00 /* Type0 base address */
|
|
#define SSB_ADM_BASE0_SHIFT 8
|
|
#define SSB_ADM_BASE1 0xFFFFF000 /* Type1 base address for the core */
|
|
#define SSB_ADM_BASE1_SHIFT 12
|
|
#define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */
|
|
#define SSB_ADM_BASE2_SHIFT 16
|
|
|
|
|
|
#endif /* LINUX_SSB_REGS_H_ */
|