mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Jean Delvare](/assets/img/avatar_default.png)
I wrote this explanation to answer a question on the i2c mailing list, and thought it would be good to have in the kernel documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org>
214 lines
8.7 KiB
Text
214 lines
8.7 KiB
Text
Usually, i2c devices are controlled by a kernel driver. But it is also
|
|
possible to access all devices on an adapter from userspace, through
|
|
the /dev interface. You need to load module i2c-dev for this.
|
|
|
|
Each registered i2c adapter gets a number, counting from 0. You can
|
|
examine /sys/class/i2c-dev/ to see what number corresponds to which adapter.
|
|
Alternatively, you can run "i2cdetect -l" to obtain a formated list of all
|
|
i2c adapters present on your system at a given time. i2cdetect is part of
|
|
the i2c-tools package.
|
|
|
|
I2C device files are character device files with major device number 89
|
|
and a minor device number corresponding to the number assigned as
|
|
explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ...,
|
|
i2c-10, ...). All 256 minor device numbers are reserved for i2c.
|
|
|
|
|
|
C example
|
|
=========
|
|
|
|
So let's say you want to access an i2c adapter from a C program. The
|
|
first thing to do is "#include <linux/i2c-dev.h>". Please note that
|
|
there are two files named "i2c-dev.h" out there, one is distributed
|
|
with the Linux kernel and is meant to be included from kernel
|
|
driver code, the other one is distributed with i2c-tools and is
|
|
meant to be included from user-space programs. You obviously want
|
|
the second one here.
|
|
|
|
Now, you have to decide which adapter you want to access. You should
|
|
inspect /sys/class/i2c-dev/ or run "i2cdetect -l" to decide this.
|
|
Adapter numbers are assigned somewhat dynamically, so you can not
|
|
assume much about them. They can even change from one boot to the next.
|
|
|
|
Next thing, open the device file, as follows:
|
|
|
|
int file;
|
|
int adapter_nr = 2; /* probably dynamically determined */
|
|
char filename[20];
|
|
|
|
snprintf(filename, 19, "/dev/i2c-%d", adapter_nr);
|
|
file = open(filename, O_RDWR);
|
|
if (file < 0) {
|
|
/* ERROR HANDLING; you can check errno to see what went wrong */
|
|
exit(1);
|
|
}
|
|
|
|
When you have opened the device, you must specify with what device
|
|
address you want to communicate:
|
|
|
|
int addr = 0x40; /* The I2C address */
|
|
|
|
if (ioctl(file, I2C_SLAVE, addr) < 0) {
|
|
/* ERROR HANDLING; you can check errno to see what went wrong */
|
|
exit(1);
|
|
}
|
|
|
|
Well, you are all set up now. You can now use SMBus commands or plain
|
|
I2C to communicate with your device. SMBus commands are preferred if
|
|
the device supports them. Both are illustrated below.
|
|
|
|
__u8 register = 0x10; /* Device register to access */
|
|
__s32 res;
|
|
char buf[10];
|
|
|
|
/* Using SMBus commands */
|
|
res = i2c_smbus_read_word_data(file, register);
|
|
if (res < 0) {
|
|
/* ERROR HANDLING: i2c transaction failed */
|
|
} else {
|
|
/* res contains the read word */
|
|
}
|
|
|
|
/* Using I2C Write, equivalent of
|
|
i2c_smbus_write_word_data(file, register, 0x6543) */
|
|
buf[0] = register;
|
|
buf[1] = 0x43;
|
|
buf[2] = 0x65;
|
|
if (write(file, buf, 3) ! =3) {
|
|
/* ERROR HANDLING: i2c transaction failed */
|
|
}
|
|
|
|
/* Using I2C Read, equivalent of i2c_smbus_read_byte(file) */
|
|
if (read(file, buf, 1) != 1) {
|
|
/* ERROR HANDLING: i2c transaction failed */
|
|
} else {
|
|
/* buf[0] contains the read byte */
|
|
}
|
|
|
|
Note that only a subset of the I2C and SMBus protocols can be achieved by
|
|
the means of read() and write() calls. In particular, so-called combined
|
|
transactions (mixing read and write messages in the same transaction)
|
|
aren't supported. For this reason, this interface is almost never used by
|
|
user-space programs.
|
|
|
|
IMPORTANT: because of the use of inline functions, you *have* to use
|
|
'-O' or some variation when you compile your program!
|
|
|
|
|
|
Full interface description
|
|
==========================
|
|
|
|
The following IOCTLs are defined:
|
|
|
|
ioctl(file, I2C_SLAVE, long addr)
|
|
Change slave address. The address is passed in the 7 lower bits of the
|
|
argument (except for 10 bit addresses, passed in the 10 lower bits in this
|
|
case).
|
|
|
|
ioctl(file, I2C_TENBIT, long select)
|
|
Selects ten bit addresses if select not equals 0, selects normal 7 bit
|
|
addresses if select equals 0. Default 0. This request is only valid
|
|
if the adapter has I2C_FUNC_10BIT_ADDR.
|
|
|
|
ioctl(file, I2C_PEC, long select)
|
|
Selects SMBus PEC (packet error checking) generation and verification
|
|
if select not equals 0, disables if select equals 0. Default 0.
|
|
Used only for SMBus transactions. This request only has an effect if the
|
|
the adapter has I2C_FUNC_SMBUS_PEC; it is still safe if not, it just
|
|
doesn't have any effect.
|
|
|
|
ioctl(file, I2C_FUNCS, unsigned long *funcs)
|
|
Gets the adapter functionality and puts it in *funcs.
|
|
|
|
ioctl(file, I2C_RDWR, struct i2c_rdwr_ioctl_data *msgset)
|
|
Do combined read/write transaction without stop in between.
|
|
Only valid if the adapter has I2C_FUNC_I2C. The argument is
|
|
a pointer to a
|
|
|
|
struct i2c_rdwr_ioctl_data {
|
|
struct i2c_msg *msgs; /* ptr to array of simple messages */
|
|
int nmsgs; /* number of messages to exchange */
|
|
}
|
|
|
|
The msgs[] themselves contain further pointers into data buffers.
|
|
The function will write or read data to or from that buffers depending
|
|
on whether the I2C_M_RD flag is set in a particular message or not.
|
|
The slave address and whether to use ten bit address mode has to be
|
|
set in each message, overriding the values set with the above ioctl's.
|
|
|
|
ioctl(file, I2C_SMBUS, struct i2c_smbus_ioctl_data *args)
|
|
Not meant to be called directly; instead, use the access functions
|
|
below.
|
|
|
|
You can do plain i2c transactions by using read(2) and write(2) calls.
|
|
You do not need to pass the address byte; instead, set it through
|
|
ioctl I2C_SLAVE before you try to access the device.
|
|
|
|
You can do SMBus level transactions (see documentation file smbus-protocol
|
|
for details) through the following functions:
|
|
__s32 i2c_smbus_write_quick(int file, __u8 value);
|
|
__s32 i2c_smbus_read_byte(int file);
|
|
__s32 i2c_smbus_write_byte(int file, __u8 value);
|
|
__s32 i2c_smbus_read_byte_data(int file, __u8 command);
|
|
__s32 i2c_smbus_write_byte_data(int file, __u8 command, __u8 value);
|
|
__s32 i2c_smbus_read_word_data(int file, __u8 command);
|
|
__s32 i2c_smbus_write_word_data(int file, __u8 command, __u16 value);
|
|
__s32 i2c_smbus_process_call(int file, __u8 command, __u16 value);
|
|
__s32 i2c_smbus_read_block_data(int file, __u8 command, __u8 *values);
|
|
__s32 i2c_smbus_write_block_data(int file, __u8 command, __u8 length,
|
|
__u8 *values);
|
|
All these transactions return -1 on failure; you can read errno to see
|
|
what happened. The 'write' transactions return 0 on success; the
|
|
'read' transactions return the read value, except for read_block, which
|
|
returns the number of values read. The block buffers need not be longer
|
|
than 32 bytes.
|
|
|
|
The above functions are all inline functions, that resolve to calls to
|
|
the i2c_smbus_access function, that on its turn calls a specific ioctl
|
|
with the data in a specific format. Read the source code if you
|
|
want to know what happens behind the screens.
|
|
|
|
|
|
Implementation details
|
|
======================
|
|
|
|
For the interested, here's the code flow which happens inside the kernel
|
|
when you use the /dev interface to I2C:
|
|
|
|
1* Your program opens /dev/i2c-N and calls ioctl() on it, as described in
|
|
section "C example" above.
|
|
|
|
2* These open() and ioctl() calls are handled by the i2c-dev kernel
|
|
driver: see i2c-dev.c:i2cdev_open() and i2c-dev.c:i2cdev_ioctl(),
|
|
respectively. You can think of i2c-dev as a generic I2C chip driver
|
|
that can be programmed from user-space.
|
|
|
|
3* Some ioctl() calls are for administrative tasks and are handled by
|
|
i2c-dev directly. Examples include I2C_SLAVE (set the address of the
|
|
device you want to access) and I2C_PEC (enable or disable SMBus error
|
|
checking on future transactions.)
|
|
|
|
4* Other ioctl() calls are converted to in-kernel function calls by
|
|
i2c-dev. Examples include I2C_FUNCS, which queries the I2C adapter
|
|
functionality using i2c.h:i2c_get_functionality(), and I2C_SMBUS, which
|
|
performs an SMBus transaction using i2c-core.c:i2c_smbus_xfer().
|
|
|
|
The i2c-dev driver is responsible for checking all the parameters that
|
|
come from user-space for validity. After this point, there is no
|
|
difference between these calls that came from user-space through i2c-dev
|
|
and calls that would have been performed by kernel I2C chip drivers
|
|
directly. This means that I2C bus drivers don't need to implement
|
|
anything special to support access from user-space.
|
|
|
|
5* These i2c-core.c/i2c.h functions are wrappers to the actual
|
|
implementation of your I2C bus driver. Each adapter must declare
|
|
callback functions implementing these standard calls.
|
|
i2c.h:i2c_get_functionality() calls i2c_adapter.algo->functionality(),
|
|
while i2c-core.c:i2c_smbus_xfer() calls either
|
|
adapter.algo->smbus_xfer() if it is implemented, or if not,
|
|
i2c-core.c:i2c_smbus_xfer_emulated() which in turn calls
|
|
i2c_adapter.algo->master_xfer().
|
|
|
|
After your I2C bus driver has processed these requests, execution runs
|
|
up the call chain, with almost no processing done, except by i2c-dev to
|
|
package the returned data, if any, in suitable format for the ioctl.
|