linux-stable/drivers/dma/dw/platform.c
Andy Shevchenko f27c22736d dmaengine: dw: platform: Mark 'hclk' clock optional
On some platforms the clock can be fixed rate, always running one and
there is no need to do anything with it.

In order to support those platforms, switch to use optional clock.

Fixes: f8d9ddbc28 ("dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake")
Depends-on: 60b8f0ddf1 ("clk: Add (devm_)clk_get_optional() functions")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20190924085116.83683-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-14 13:51:44 +05:30

219 lines
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Platform driver for the Synopsys DesignWare DMA Controller
*
* Copyright (C) 2007-2008 Atmel Corporation
* Copyright (C) 2010-2011 ST Microelectronics
* Copyright (C) 2013 Intel Corporation
*
* Some parts of this driver are derived from the original dw_dmac.
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/acpi.h>
#include "internal.h"
#define DRV_NAME "dw_dmac"
static int dw_probe(struct platform_device *pdev)
{
const struct dw_dma_chip_pdata *match;
struct dw_dma_chip_pdata *data;
struct dw_dma_chip *chip;
struct device *dev = &pdev->dev;
int err;
match = device_get_match_data(dev);
if (!match)
return -ENODEV;
data = devm_kmemdup(&pdev->dev, match, sizeof(*match), GFP_KERNEL);
if (!data)
return -ENOMEM;
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->irq = platform_get_irq(pdev, 0);
if (chip->irq < 0)
return chip->irq;
chip->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(chip->regs))
return PTR_ERR(chip->regs);
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err)
return err;
if (!data->pdata)
data->pdata = dev_get_platdata(dev);
if (!data->pdata)
data->pdata = dw_dma_parse_dt(pdev);
chip->dev = dev;
chip->id = pdev->id;
chip->pdata = data->pdata;
data->chip = chip;
chip->clk = devm_clk_get_optional(chip->dev, "hclk");
if (IS_ERR(chip->clk))
return PTR_ERR(chip->clk);
err = clk_prepare_enable(chip->clk);
if (err)
return err;
pm_runtime_enable(&pdev->dev);
err = data->probe(chip);
if (err)
goto err_dw_dma_probe;
platform_set_drvdata(pdev, data);
dw_dma_of_controller_register(chip->dw);
dw_dma_acpi_controller_register(chip->dw);
return 0;
err_dw_dma_probe:
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(chip->clk);
return err;
}
static int dw_remove(struct platform_device *pdev)
{
struct dw_dma_chip_pdata *data = platform_get_drvdata(pdev);
struct dw_dma_chip *chip = data->chip;
int ret;
dw_dma_acpi_controller_free(chip->dw);
dw_dma_of_controller_free(chip->dw);
ret = data->remove(chip);
if (ret)
dev_warn(chip->dev, "can't remove device properly: %d\n", ret);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(chip->clk);
return 0;
}
static void dw_shutdown(struct platform_device *pdev)
{
struct dw_dma_chip_pdata *data = platform_get_drvdata(pdev);
struct dw_dma_chip *chip = data->chip;
/*
* We have to call do_dw_dma_disable() to stop any ongoing transfer. On
* some platforms we can't do that since DMA device is powered off.
* Moreover we have no possibility to check if the platform is affected
* or not. That's why we call pm_runtime_get_sync() / pm_runtime_put()
* unconditionally. On the other hand we can't use
* pm_runtime_suspended() because runtime PM framework is not fully
* used by the driver.
*/
pm_runtime_get_sync(chip->dev);
do_dw_dma_disable(chip);
pm_runtime_put_sync_suspend(chip->dev);
clk_disable_unprepare(chip->clk);
}
#ifdef CONFIG_OF
static const struct of_device_id dw_dma_of_id_table[] = {
{ .compatible = "snps,dma-spear1340", .data = &dw_dma_chip_pdata },
{}
};
MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
#endif
#ifdef CONFIG_ACPI
static const struct acpi_device_id dw_dma_acpi_id_table[] = {
{ "INTL9C60", (kernel_ulong_t)&dw_dma_chip_pdata },
{ "80862286", (kernel_ulong_t)&dw_dma_chip_pdata },
{ "808622C0", (kernel_ulong_t)&dw_dma_chip_pdata },
/* Elkhart Lake iDMA 32-bit (PSE DMA) */
{ "80864BB4", (kernel_ulong_t)&idma32_chip_pdata },
{ "80864BB5", (kernel_ulong_t)&idma32_chip_pdata },
{ "80864BB6", (kernel_ulong_t)&idma32_chip_pdata },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table);
#endif
#ifdef CONFIG_PM_SLEEP
static int dw_suspend_late(struct device *dev)
{
struct dw_dma_chip_pdata *data = dev_get_drvdata(dev);
struct dw_dma_chip *chip = data->chip;
do_dw_dma_disable(chip);
clk_disable_unprepare(chip->clk);
return 0;
}
static int dw_resume_early(struct device *dev)
{
struct dw_dma_chip_pdata *data = dev_get_drvdata(dev);
struct dw_dma_chip *chip = data->chip;
int ret;
ret = clk_prepare_enable(chip->clk);
if (ret)
return ret;
return do_dw_dma_enable(chip);
}
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dw_dev_pm_ops = {
SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_suspend_late, dw_resume_early)
};
static struct platform_driver dw_driver = {
.probe = dw_probe,
.remove = dw_remove,
.shutdown = dw_shutdown,
.driver = {
.name = DRV_NAME,
.pm = &dw_dev_pm_ops,
.of_match_table = of_match_ptr(dw_dma_of_id_table),
.acpi_match_table = ACPI_PTR(dw_dma_acpi_id_table),
},
};
static int __init dw_init(void)
{
return platform_driver_register(&dw_driver);
}
subsys_initcall(dw_init);
static void __exit dw_exit(void)
{
platform_driver_unregister(&dw_driver);
}
module_exit(dw_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller platform driver");
MODULE_ALIAS("platform:" DRV_NAME);