mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Michael Hennerich](/assets/img/avatar_default.png)
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
349 lines
11 KiB
C
349 lines
11 KiB
C
/*
|
|
* include/linux/input/adxl34x.h
|
|
*
|
|
* Digital Accelerometer characteristics are highly application specific
|
|
* and may vary between boards and models. The platform_data for the
|
|
* device's "struct device" holds this information.
|
|
*
|
|
* Copyright 2009 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#ifndef __LINUX_INPUT_ADXL34X_H__
|
|
#define __LINUX_INPUT_ADXL34X_H__
|
|
|
|
struct adxl34x_platform_data {
|
|
|
|
/*
|
|
* X,Y,Z Axis Offset:
|
|
* offer user offset adjustments in twoscompliment
|
|
* form with a scale factor of 15.6 mg/LSB (i.e. 0x7F = +2 g)
|
|
*/
|
|
|
|
s8 x_axis_offset;
|
|
s8 y_axis_offset;
|
|
s8 z_axis_offset;
|
|
|
|
/*
|
|
* TAP_X/Y/Z Enable: Setting TAP_X, Y, or Z Enable enables X,
|
|
* Y, or Z participation in Tap detection. A '0' excludes the
|
|
* selected axis from participation in Tap detection.
|
|
* Setting the SUPPRESS bit suppresses Double Tap detection if
|
|
* acceleration greater than tap_threshold is present between
|
|
* taps.
|
|
*/
|
|
|
|
#define ADXL_SUPPRESS (1 << 3)
|
|
#define ADXL_TAP_X_EN (1 << 2)
|
|
#define ADXL_TAP_Y_EN (1 << 1)
|
|
#define ADXL_TAP_Z_EN (1 << 0)
|
|
|
|
u8 tap_axis_control;
|
|
|
|
/*
|
|
* tap_threshold:
|
|
* holds the threshold value for tap detection/interrupts.
|
|
* The data format is unsigned. The scale factor is 62.5 mg/LSB
|
|
* (i.e. 0xFF = +16 g). A zero value may result in undesirable
|
|
* behavior if Tap/Double Tap is enabled.
|
|
*/
|
|
|
|
u8 tap_threshold;
|
|
|
|
/*
|
|
* tap_duration:
|
|
* is an unsigned time value representing the maximum
|
|
* time that an event must be above the tap_threshold threshold
|
|
* to qualify as a tap event. The scale factor is 625 us/LSB. A zero
|
|
* value will prevent Tap/Double Tap functions from working.
|
|
*/
|
|
|
|
u8 tap_duration;
|
|
|
|
/*
|
|
* tap_latency:
|
|
* is an unsigned time value representing the wait time
|
|
* from the detection of a tap event to the opening of the time
|
|
* window tap_window for a possible second tap event. The scale
|
|
* factor is 1.25 ms/LSB. A zero value will disable the Double Tap
|
|
* function.
|
|
*/
|
|
|
|
u8 tap_latency;
|
|
|
|
/*
|
|
* tap_window:
|
|
* is an unsigned time value representing the amount
|
|
* of time after the expiration of tap_latency during which a second
|
|
* tap can begin. The scale factor is 1.25 ms/LSB. A zero value will
|
|
* disable the Double Tap function.
|
|
*/
|
|
|
|
u8 tap_window;
|
|
|
|
/*
|
|
* act_axis_control:
|
|
* X/Y/Z Enable: A '1' enables X, Y, or Z participation in activity
|
|
* or inactivity detection. A '0' excludes the selected axis from
|
|
* participation. If all of the axes are excluded, the function is
|
|
* disabled.
|
|
* AC/DC: A '0' = DC coupled operation and a '1' = AC coupled
|
|
* operation. In DC coupled operation, the current acceleration is
|
|
* compared with activity_threshold and inactivity_threshold directly
|
|
* to determine whether activity or inactivity is detected. In AC
|
|
* coupled operation for activity detection, the acceleration value
|
|
* at the start of activity detection is taken as a reference value.
|
|
* New samples of acceleration are then compared to this
|
|
* reference value and if the magnitude of the difference exceeds
|
|
* activity_threshold the device will trigger an activity interrupt. In
|
|
* AC coupled operation for inactivity detection, a reference value
|
|
* is used again for comparison and is updated whenever the
|
|
* device exceeds the inactivity threshold. Once the reference
|
|
* value is selected, the device compares the magnitude of the
|
|
* difference between the reference value and the current
|
|
* acceleration with inactivity_threshold. If the difference is below
|
|
* inactivity_threshold for a total of inactivity_time, the device is
|
|
* considered inactive and the inactivity interrupt is triggered.
|
|
*/
|
|
|
|
#define ADXL_ACT_ACDC (1 << 7)
|
|
#define ADXL_ACT_X_EN (1 << 6)
|
|
#define ADXL_ACT_Y_EN (1 << 5)
|
|
#define ADXL_ACT_Z_EN (1 << 4)
|
|
#define ADXL_INACT_ACDC (1 << 3)
|
|
#define ADXL_INACT_X_EN (1 << 2)
|
|
#define ADXL_INACT_Y_EN (1 << 1)
|
|
#define ADXL_INACT_Z_EN (1 << 0)
|
|
|
|
u8 act_axis_control;
|
|
|
|
/*
|
|
* activity_threshold:
|
|
* holds the threshold value for activity detection.
|
|
* The data format is unsigned. The scale factor is
|
|
* 62.5 mg/LSB. A zero value may result in undesirable behavior if
|
|
* Activity interrupt is enabled.
|
|
*/
|
|
|
|
u8 activity_threshold;
|
|
|
|
/*
|
|
* inactivity_threshold:
|
|
* holds the threshold value for inactivity
|
|
* detection. The data format is unsigned. The scale
|
|
* factor is 62.5 mg/LSB. A zero value may result in undesirable
|
|
* behavior if Inactivity interrupt is enabled.
|
|
*/
|
|
|
|
u8 inactivity_threshold;
|
|
|
|
/*
|
|
* inactivity_time:
|
|
* is an unsigned time value representing the
|
|
* amount of time that acceleration must be below the value in
|
|
* inactivity_threshold for inactivity to be declared. The scale factor
|
|
* is 1 second/LSB. Unlike the other interrupt functions, which
|
|
* operate on unfiltered data, the inactivity function operates on the
|
|
* filtered output data. At least one output sample must be
|
|
* generated for the inactivity interrupt to be triggered. This will
|
|
* result in the function appearing un-responsive if the
|
|
* inactivity_time register is set with a value less than the time
|
|
* constant of the Output Data Rate. A zero value will result in an
|
|
* interrupt when the output data is below inactivity_threshold.
|
|
*/
|
|
|
|
u8 inactivity_time;
|
|
|
|
/*
|
|
* free_fall_threshold:
|
|
* holds the threshold value for Free-Fall detection.
|
|
* The data format is unsigned. The root-sum-square(RSS) value
|
|
* of all axes is calculated and compared to the value in
|
|
* free_fall_threshold to determine if a free fall event may be
|
|
* occurring. The scale factor is 62.5 mg/LSB. A zero value may
|
|
* result in undesirable behavior if Free-Fall interrupt is
|
|
* enabled. Values between 300 and 600 mg (0x05 to 0x09) are
|
|
* recommended.
|
|
*/
|
|
|
|
u8 free_fall_threshold;
|
|
|
|
/*
|
|
* free_fall_time:
|
|
* is an unsigned time value representing the minimum
|
|
* time that the RSS value of all axes must be less than
|
|
* free_fall_threshold to generate a Free-Fall interrupt. The
|
|
* scale factor is 5 ms/LSB. A zero value may result in
|
|
* undesirable behavior if Free-Fall interrupt is enabled.
|
|
* Values between 100 to 350 ms (0x14 to 0x46) are recommended.
|
|
*/
|
|
|
|
u8 free_fall_time;
|
|
|
|
/*
|
|
* data_rate:
|
|
* Selects device bandwidth and output data rate.
|
|
* RATE = 3200 Hz / (2^(15 - x)). Default value is 0x0A, or 100 Hz
|
|
* Output Data Rate. An Output Data Rate should be selected that
|
|
* is appropriate for the communication protocol and frequency
|
|
* selected. Selecting too high of an Output Data Rate with a low
|
|
* communication speed will result in samples being discarded.
|
|
*/
|
|
|
|
u8 data_rate;
|
|
|
|
/*
|
|
* data_range:
|
|
* FULL_RES: When this bit is set with the device is
|
|
* in Full-Resolution Mode, where the output resolution increases
|
|
* with RANGE to maintain a 4 mg/LSB scale factor. When this
|
|
* bit is cleared the device is in 10-bit Mode and RANGE determine the
|
|
* maximum g-Range and scale factor.
|
|
*/
|
|
|
|
#define ADXL_FULL_RES (1 << 3)
|
|
#define ADXL_RANGE_PM_2g 0
|
|
#define ADXL_RANGE_PM_4g 1
|
|
#define ADXL_RANGE_PM_8g 2
|
|
#define ADXL_RANGE_PM_16g 3
|
|
|
|
u8 data_range;
|
|
|
|
/*
|
|
* low_power_mode:
|
|
* A '0' = Normal operation and a '1' = Reduced
|
|
* power operation with somewhat higher noise.
|
|
*/
|
|
|
|
u8 low_power_mode;
|
|
|
|
/*
|
|
* power_mode:
|
|
* LINK: A '1' with both the activity and inactivity functions
|
|
* enabled will delay the start of the activity function until
|
|
* inactivity is detected. Once activity is detected, inactivity
|
|
* detection will begin and prevent the detection of activity. This
|
|
* bit serially links the activity and inactivity functions. When '0'
|
|
* the inactivity and activity functions are concurrent. Additional
|
|
* information can be found in the Application section under Link
|
|
* Mode.
|
|
* AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode
|
|
* when inactivity (acceleration has been below inactivity_threshold
|
|
* for at least inactivity_time) is detected and the LINK bit is set.
|
|
* A '0' disables automatic switching to Sleep Mode. See SLEEP
|
|
* for further description.
|
|
*/
|
|
|
|
#define ADXL_LINK (1 << 5)
|
|
#define ADXL_AUTO_SLEEP (1 << 4)
|
|
|
|
u8 power_mode;
|
|
|
|
/*
|
|
* fifo_mode:
|
|
* BYPASS The FIFO is bypassed
|
|
* FIFO FIFO collects up to 32 values then stops collecting data
|
|
* STREAM FIFO holds the last 32 data values. Once full, the FIFO's
|
|
* oldest data is lost as it is replaced with newer data
|
|
*
|
|
* DEFAULT should be ADXL_FIFO_STREAM
|
|
*/
|
|
|
|
#define ADXL_FIFO_BYPASS 0
|
|
#define ADXL_FIFO_FIFO 1
|
|
#define ADXL_FIFO_STREAM 2
|
|
|
|
u8 fifo_mode;
|
|
|
|
/*
|
|
* watermark:
|
|
* The Watermark feature can be used to reduce the interrupt load
|
|
* of the system. The FIFO fills up to the value stored in watermark
|
|
* [1..32] and then generates an interrupt.
|
|
* A '0' disables the watermark feature.
|
|
*/
|
|
|
|
u8 watermark;
|
|
|
|
u32 ev_type; /* EV_ABS or EV_REL */
|
|
|
|
u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */
|
|
u32 ev_code_y; /* ABS_X,Y,Z or REL_X,Y,Z */
|
|
u32 ev_code_z; /* ABS_X,Y,Z or REL_X,Y,Z */
|
|
|
|
/*
|
|
* A valid BTN or KEY Code; use tap_axis_control to disable
|
|
* event reporting
|
|
*/
|
|
|
|
u32 ev_code_tap[3]; /* EV_KEY {X-Axis, Y-Axis, Z-Axis} */
|
|
|
|
/*
|
|
* A valid BTN or KEY Code for Free-Fall or Activity enables
|
|
* input event reporting. A '0' disables the Free-Fall or
|
|
* Activity reporting.
|
|
*/
|
|
|
|
u32 ev_code_ff; /* EV_KEY */
|
|
u32 ev_code_act_inactivity; /* EV_KEY */
|
|
|
|
/*
|
|
* Use ADXL34x INT2 instead of INT1
|
|
*/
|
|
u8 use_int2;
|
|
|
|
/*
|
|
* ADXL346 only ORIENTATION SENSING feature
|
|
* The orientation function of the ADXL346 reports both 2-D and
|
|
* 3-D orientation concurrently.
|
|
*/
|
|
|
|
#define ADXL_EN_ORIENTATION_2D 1
|
|
#define ADXL_EN_ORIENTATION_3D 2
|
|
#define ADXL_EN_ORIENTATION_2D_3D 3
|
|
|
|
u8 orientation_enable;
|
|
|
|
/*
|
|
* The width of the deadzone region between two or more
|
|
* orientation positions is determined by setting the Deadzone
|
|
* value. The deadzone region size can be specified with a
|
|
* resolution of 3.6deg. The deadzone angle represents the total
|
|
* angle where the orientation is considered invalid.
|
|
*/
|
|
|
|
#define ADXL_DEADZONE_ANGLE_0p0 0 /* !!!0.0 [deg] */
|
|
#define ADXL_DEADZONE_ANGLE_3p6 1 /* 3.6 [deg] */
|
|
#define ADXL_DEADZONE_ANGLE_7p2 2 /* 7.2 [deg] */
|
|
#define ADXL_DEADZONE_ANGLE_10p8 3 /* 10.8 [deg] */
|
|
#define ADXL_DEADZONE_ANGLE_14p4 4 /* 14.4 [deg] */
|
|
#define ADXL_DEADZONE_ANGLE_18p0 5 /* 18.0 [deg] */
|
|
#define ADXL_DEADZONE_ANGLE_21p6 6 /* 21.6 [deg] */
|
|
#define ADXL_DEADZONE_ANGLE_25p2 7 /* 25.2 [deg] */
|
|
|
|
u8 deadzone_angle;
|
|
|
|
/*
|
|
* To eliminate most human motion such as walking or shaking,
|
|
* a Divisor value should be selected to effectively limit the
|
|
* orientation bandwidth. Set the depth of the filter used to
|
|
* low-pass filter the measured acceleration for stable
|
|
* orientation sensing
|
|
*/
|
|
|
|
#define ADXL_LP_FILTER_DIVISOR_2 0
|
|
#define ADXL_LP_FILTER_DIVISOR_4 1
|
|
#define ADXL_LP_FILTER_DIVISOR_8 2
|
|
#define ADXL_LP_FILTER_DIVISOR_16 3
|
|
#define ADXL_LP_FILTER_DIVISOR_32 4
|
|
#define ADXL_LP_FILTER_DIVISOR_64 5
|
|
#define ADXL_LP_FILTER_DIVISOR_128 6
|
|
#define ADXL_LP_FILTER_DIVISOR_256 7
|
|
|
|
u8 divisor_length;
|
|
|
|
u32 ev_codes_orient_2d[4]; /* EV_KEY {+X, -X, +Y, -Y} */
|
|
u32 ev_codes_orient_3d[6]; /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
|
|
};
|
|
#endif
|