mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-03 17:40:04 +00:00
![Michael Ellerman](/assets/img/avatar_default.png)
Prior to commit2337d20728
("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts"), the branch from hmi_exception_early() to hmi_exception_realmode() was just a bl hmi_exception_realmode, which the linker would turn into a bl to the local entry point of hmi_exception_realmode. This was broken when CONFIG_RELOCATABLE=y because hmi_exception_realmode() is not in the low part of the kernel text that is copied down to 0x0. But in fixing that, we added a new bug on little endian kernels. Because the branch is now a bctrl when CONFIG_RELOCATABLE=y, we branch to the global entry point of hmi_exception_realmode(). The global entry point must be called with r12 containing the address of hmi_exception_realmode(), because it uses that value to calculate the TOC value (r2). This may manifest as a checkstop, because we take a junk value from r12 which came from HSRR1, add a small constant to it and then use that as the TOC pointer. The HSRR1 value will have 0x9 as the top nibble, which puts it above RAM and somewhere in MMIO space. Fix it by changing the BRANCH_LINK_TO_FAR() macro to always use r12 to load the label we're branching to. This means r12 will be setup correctly on LE, fixing this bug, and r12 is also volatile across function calls on BE so it's a good choice anyway. Fixes:2337d20728
("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts") Reported-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
1602 lines
45 KiB
ArmAsm
1602 lines
45 KiB
ArmAsm
/*
|
|
* This file contains the 64-bit "server" PowerPC variant
|
|
* of the low level exception handling including exception
|
|
* vectors, exception return, part of the slb and stab
|
|
* handling and other fixed offset specific things.
|
|
*
|
|
* This file is meant to be #included from head_64.S due to
|
|
* position dependent assembly.
|
|
*
|
|
* Most of this originates from head_64.S and thus has the same
|
|
* copyright history.
|
|
*
|
|
*/
|
|
|
|
#include <asm/hw_irq.h>
|
|
#include <asm/exception-64s.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/cpuidle.h>
|
|
#include <asm/head-64.h>
|
|
|
|
/*
|
|
* There are a few constraints to be concerned with.
|
|
* - Real mode exceptions code/data must be located at their physical location.
|
|
* - Virtual mode exceptions must be mapped at their 0xc000... location.
|
|
* - Fixed location code must not call directly beyond the __end_interrupts
|
|
* area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence
|
|
* must be used.
|
|
* - LOAD_HANDLER targets must be within first 64K of physical 0 /
|
|
* virtual 0xc00...
|
|
* - Conditional branch targets must be within +/-32K of caller.
|
|
*
|
|
* "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and
|
|
* therefore don't have to run in physically located code or rfid to
|
|
* virtual mode kernel code. However on relocatable kernels they do have
|
|
* to branch to KERNELBASE offset because the rest of the kernel (outside
|
|
* the exception vectors) may be located elsewhere.
|
|
*
|
|
* Virtual exceptions correspond with physical, except their entry points
|
|
* are offset by 0xc000000000000000 and also tend to get an added 0x4000
|
|
* offset applied. Virtual exceptions are enabled with the Alternate
|
|
* Interrupt Location (AIL) bit set in the LPCR. However this does not
|
|
* guarantee they will be delivered virtually. Some conditions (see the ISA)
|
|
* cause exceptions to be delivered in real mode.
|
|
*
|
|
* It's impossible to receive interrupts below 0x300 via AIL.
|
|
*
|
|
* KVM: None of the virtual exceptions are from the guest. Anything that
|
|
* escalated to HV=1 from HV=0 is delivered via real mode handlers.
|
|
*
|
|
*
|
|
* We layout physical memory as follows:
|
|
* 0x0000 - 0x00ff : Secondary processor spin code
|
|
* 0x0100 - 0x18ff : Real mode pSeries interrupt vectors
|
|
* 0x1900 - 0x3fff : Real mode trampolines
|
|
* 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors
|
|
* 0x5900 - 0x6fff : Relon mode trampolines
|
|
* 0x7000 - 0x7fff : FWNMI data area
|
|
* 0x8000 - .... : Common interrupt handlers, remaining early
|
|
* setup code, rest of kernel.
|
|
*
|
|
* We could reclaim 0x4000-0x42ff for real mode trampolines if the space
|
|
* is necessary. Until then it's more consistent to explicitly put VIRT_NONE
|
|
* vectors there.
|
|
*/
|
|
OPEN_FIXED_SECTION(real_vectors, 0x0100, 0x1900)
|
|
OPEN_FIXED_SECTION(real_trampolines, 0x1900, 0x4000)
|
|
OPEN_FIXED_SECTION(virt_vectors, 0x4000, 0x5900)
|
|
OPEN_FIXED_SECTION(virt_trampolines, 0x5900, 0x7000)
|
|
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
|
|
/*
|
|
* Data area reserved for FWNMI option.
|
|
* This address (0x7000) is fixed by the RPA.
|
|
* pseries and powernv need to keep the whole page from
|
|
* 0x7000 to 0x8000 free for use by the firmware
|
|
*/
|
|
ZERO_FIXED_SECTION(fwnmi_page, 0x7000, 0x8000)
|
|
OPEN_TEXT_SECTION(0x8000)
|
|
#else
|
|
OPEN_TEXT_SECTION(0x7000)
|
|
#endif
|
|
|
|
USE_FIXED_SECTION(real_vectors)
|
|
|
|
/*
|
|
* This is the start of the interrupt handlers for pSeries
|
|
* This code runs with relocation off.
|
|
* Code from here to __end_interrupts gets copied down to real
|
|
* address 0x100 when we are running a relocatable kernel.
|
|
* Therefore any relative branches in this section must only
|
|
* branch to labels in this section.
|
|
*/
|
|
.globl __start_interrupts
|
|
__start_interrupts:
|
|
|
|
/* No virt vectors corresponding with 0x0..0x100 */
|
|
EXC_VIRT_NONE(0x4000, 0x100)
|
|
|
|
|
|
#ifdef CONFIG_PPC_P7_NAP
|
|
/*
|
|
* If running native on arch 2.06 or later, check if we are waking up
|
|
* from nap/sleep/winkle, and branch to idle handler.
|
|
*/
|
|
#define IDLETEST(n) \
|
|
BEGIN_FTR_SECTION ; \
|
|
mfspr r10,SPRN_SRR1 ; \
|
|
rlwinm. r10,r10,47-31,30,31 ; \
|
|
beq- 1f ; \
|
|
cmpwi cr3,r10,2 ; \
|
|
BRANCH_TO_COMMON(r10, system_reset_idle_common) ; \
|
|
1: \
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
|
|
#else
|
|
#define IDLETEST NOTEST
|
|
#endif
|
|
|
|
EXC_REAL_BEGIN(system_reset, 0x100, 0x100)
|
|
SET_SCRATCH0(r13)
|
|
GET_PACA(r13)
|
|
clrrdi r13,r13,1 /* Last bit of HSPRG0 is set if waking from winkle */
|
|
EXCEPTION_PROLOG_PSERIES_PACA(PACA_EXGEN, system_reset_common, EXC_STD,
|
|
IDLETEST, 0x100)
|
|
|
|
EXC_REAL_END(system_reset, 0x100, 0x100)
|
|
EXC_VIRT_NONE(0x4100, 0x100)
|
|
|
|
#ifdef CONFIG_PPC_P7_NAP
|
|
EXC_COMMON_BEGIN(system_reset_idle_common)
|
|
BEGIN_FTR_SECTION
|
|
GET_PACA(r13) /* Restore HSPRG0 to get the winkle bit in r13 */
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
|
|
bl pnv_restore_hyp_resource
|
|
|
|
li r0,PNV_THREAD_RUNNING
|
|
stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
|
|
li r0,KVM_HWTHREAD_IN_KERNEL
|
|
stb r0,HSTATE_HWTHREAD_STATE(r13)
|
|
/* Order setting hwthread_state vs. testing hwthread_req */
|
|
sync
|
|
lbz r0,HSTATE_HWTHREAD_REQ(r13)
|
|
cmpwi r0,0
|
|
beq 1f
|
|
BRANCH_TO_KVM(r10, kvm_start_guest)
|
|
1:
|
|
#endif
|
|
|
|
/* Return SRR1 from power7_nap() */
|
|
mfspr r3,SPRN_SRR1
|
|
blt cr3,2f
|
|
b pnv_wakeup_loss
|
|
2: b pnv_wakeup_noloss
|
|
#endif
|
|
|
|
EXC_COMMON(system_reset_common, 0x100, system_reset_exception)
|
|
|
|
#ifdef CONFIG_PPC_PSERIES
|
|
/*
|
|
* Vectors for the FWNMI option. Share common code.
|
|
*/
|
|
TRAMP_REAL_BEGIN(system_reset_fwnmi)
|
|
SET_SCRATCH0(r13) /* save r13 */
|
|
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
|
|
NOTEST, 0x100)
|
|
#endif /* CONFIG_PPC_PSERIES */
|
|
|
|
|
|
EXC_REAL_BEGIN(machine_check, 0x200, 0x100)
|
|
/* This is moved out of line as it can be patched by FW, but
|
|
* some code path might still want to branch into the original
|
|
* vector
|
|
*/
|
|
SET_SCRATCH0(r13) /* save r13 */
|
|
/*
|
|
* Running native on arch 2.06 or later, we may wakeup from winkle
|
|
* inside machine check. If yes, then last bit of HSPRG0 would be set
|
|
* to 1. Hence clear it unconditionally.
|
|
*/
|
|
GET_PACA(r13)
|
|
clrrdi r13,r13,1
|
|
SET_PACA(r13)
|
|
EXCEPTION_PROLOG_0(PACA_EXMC)
|
|
BEGIN_FTR_SECTION
|
|
b machine_check_powernv_early
|
|
FTR_SECTION_ELSE
|
|
b machine_check_pSeries_0
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
|
|
EXC_REAL_END(machine_check, 0x200, 0x100)
|
|
EXC_VIRT_NONE(0x4200, 0x100)
|
|
TRAMP_REAL_BEGIN(machine_check_powernv_early)
|
|
BEGIN_FTR_SECTION
|
|
EXCEPTION_PROLOG_1(PACA_EXMC, NOTEST, 0x200)
|
|
/*
|
|
* Register contents:
|
|
* R13 = PACA
|
|
* R9 = CR
|
|
* Original R9 to R13 is saved on PACA_EXMC
|
|
*
|
|
* Switch to mc_emergency stack and handle re-entrancy (we limit
|
|
* the nested MCE upto level 4 to avoid stack overflow).
|
|
* Save MCE registers srr1, srr0, dar and dsisr and then set ME=1
|
|
*
|
|
* We use paca->in_mce to check whether this is the first entry or
|
|
* nested machine check. We increment paca->in_mce to track nested
|
|
* machine checks.
|
|
*
|
|
* If this is the first entry then set stack pointer to
|
|
* paca->mc_emergency_sp, otherwise r1 is already pointing to
|
|
* stack frame on mc_emergency stack.
|
|
*
|
|
* NOTE: We are here with MSR_ME=0 (off), which means we risk a
|
|
* checkstop if we get another machine check exception before we do
|
|
* rfid with MSR_ME=1.
|
|
*/
|
|
mr r11,r1 /* Save r1 */
|
|
lhz r10,PACA_IN_MCE(r13)
|
|
cmpwi r10,0 /* Are we in nested machine check */
|
|
bne 0f /* Yes, we are. */
|
|
/* First machine check entry */
|
|
ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */
|
|
0: subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
|
|
addi r10,r10,1 /* increment paca->in_mce */
|
|
sth r10,PACA_IN_MCE(r13)
|
|
/* Limit nested MCE to level 4 to avoid stack overflow */
|
|
cmpwi r10,4
|
|
bgt 2f /* Check if we hit limit of 4 */
|
|
std r11,GPR1(r1) /* Save r1 on the stack. */
|
|
std r11,0(r1) /* make stack chain pointer */
|
|
mfspr r11,SPRN_SRR0 /* Save SRR0 */
|
|
std r11,_NIP(r1)
|
|
mfspr r11,SPRN_SRR1 /* Save SRR1 */
|
|
std r11,_MSR(r1)
|
|
mfspr r11,SPRN_DAR /* Save DAR */
|
|
std r11,_DAR(r1)
|
|
mfspr r11,SPRN_DSISR /* Save DSISR */
|
|
std r11,_DSISR(r1)
|
|
std r9,_CCR(r1) /* Save CR in stackframe */
|
|
/* Save r9 through r13 from EXMC save area to stack frame. */
|
|
EXCEPTION_PROLOG_COMMON_2(PACA_EXMC)
|
|
mfmsr r11 /* get MSR value */
|
|
ori r11,r11,MSR_ME /* turn on ME bit */
|
|
ori r11,r11,MSR_RI /* turn on RI bit */
|
|
LOAD_HANDLER(r12, machine_check_handle_early)
|
|
1: mtspr SPRN_SRR0,r12
|
|
mtspr SPRN_SRR1,r11
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
2:
|
|
/* Stack overflow. Stay on emergency stack and panic.
|
|
* Keep the ME bit off while panic-ing, so that if we hit
|
|
* another machine check we checkstop.
|
|
*/
|
|
addi r1,r1,INT_FRAME_SIZE /* go back to previous stack frame */
|
|
ld r11,PACAKMSR(r13)
|
|
LOAD_HANDLER(r12, unrecover_mce)
|
|
li r10,MSR_ME
|
|
andc r11,r11,r10 /* Turn off MSR_ME */
|
|
b 1b
|
|
b . /* prevent speculative execution */
|
|
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
|
|
|
|
TRAMP_REAL_BEGIN(machine_check_pSeries)
|
|
.globl machine_check_fwnmi
|
|
machine_check_fwnmi:
|
|
SET_SCRATCH0(r13) /* save r13 */
|
|
EXCEPTION_PROLOG_0(PACA_EXMC)
|
|
machine_check_pSeries_0:
|
|
EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST_PR, 0x200)
|
|
/*
|
|
* The following is essentially EXCEPTION_PROLOG_PSERIES_1 with the
|
|
* difference that MSR_RI is not enabled, because PACA_EXMC is being
|
|
* used, so nested machine check corrupts it. machine_check_common
|
|
* enables MSR_RI.
|
|
*/
|
|
ld r10,PACAKMSR(r13)
|
|
xori r10,r10,MSR_RI
|
|
mfspr r11,SPRN_SRR0
|
|
LOAD_HANDLER(r12, machine_check_common)
|
|
mtspr SPRN_SRR0,r12
|
|
mfspr r12,SPRN_SRR1
|
|
mtspr SPRN_SRR1,r10
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
TRAMP_KVM_SKIP(PACA_EXMC, 0x200)
|
|
|
|
EXC_COMMON_BEGIN(machine_check_common)
|
|
/*
|
|
* Machine check is different because we use a different
|
|
* save area: PACA_EXMC instead of PACA_EXGEN.
|
|
*/
|
|
mfspr r10,SPRN_DAR
|
|
std r10,PACA_EXMC+EX_DAR(r13)
|
|
mfspr r10,SPRN_DSISR
|
|
stw r10,PACA_EXMC+EX_DSISR(r13)
|
|
EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
|
|
FINISH_NAP
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
ld r3,PACA_EXMC+EX_DAR(r13)
|
|
lwz r4,PACA_EXMC+EX_DSISR(r13)
|
|
/* Enable MSR_RI when finished with PACA_EXMC */
|
|
li r10,MSR_RI
|
|
mtmsrd r10,1
|
|
std r3,_DAR(r1)
|
|
std r4,_DSISR(r1)
|
|
bl save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl machine_check_exception
|
|
b ret_from_except
|
|
|
|
#define MACHINE_CHECK_HANDLER_WINDUP \
|
|
/* Clear MSR_RI before setting SRR0 and SRR1. */\
|
|
li r0,MSR_RI; \
|
|
mfmsr r9; /* get MSR value */ \
|
|
andc r9,r9,r0; \
|
|
mtmsrd r9,1; /* Clear MSR_RI */ \
|
|
/* Move original SRR0 and SRR1 into the respective regs */ \
|
|
ld r9,_MSR(r1); \
|
|
mtspr SPRN_SRR1,r9; \
|
|
ld r3,_NIP(r1); \
|
|
mtspr SPRN_SRR0,r3; \
|
|
ld r9,_CTR(r1); \
|
|
mtctr r9; \
|
|
ld r9,_XER(r1); \
|
|
mtxer r9; \
|
|
ld r9,_LINK(r1); \
|
|
mtlr r9; \
|
|
REST_GPR(0, r1); \
|
|
REST_8GPRS(2, r1); \
|
|
REST_GPR(10, r1); \
|
|
ld r11,_CCR(r1); \
|
|
mtcr r11; \
|
|
/* Decrement paca->in_mce. */ \
|
|
lhz r12,PACA_IN_MCE(r13); \
|
|
subi r12,r12,1; \
|
|
sth r12,PACA_IN_MCE(r13); \
|
|
REST_GPR(11, r1); \
|
|
REST_2GPRS(12, r1); \
|
|
/* restore original r1. */ \
|
|
ld r1,GPR1(r1)
|
|
|
|
/*
|
|
* Handle machine check early in real mode. We come here with
|
|
* ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
|
|
*/
|
|
EXC_COMMON_BEGIN(machine_check_handle_early)
|
|
std r0,GPR0(r1) /* Save r0 */
|
|
EXCEPTION_PROLOG_COMMON_3(0x200)
|
|
bl save_nvgprs
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl machine_check_early
|
|
std r3,RESULT(r1) /* Save result */
|
|
ld r12,_MSR(r1)
|
|
#ifdef CONFIG_PPC_P7_NAP
|
|
/*
|
|
* Check if thread was in power saving mode. We come here when any
|
|
* of the following is true:
|
|
* a. thread wasn't in power saving mode
|
|
* b. thread was in power saving mode with no state loss,
|
|
* supervisor state loss or hypervisor state loss.
|
|
*
|
|
* Go back to nap/sleep/winkle mode again if (b) is true.
|
|
*/
|
|
rlwinm. r11,r12,47-31,30,31 /* Was it in power saving mode? */
|
|
beq 4f /* No, it wasn;t */
|
|
/* Thread was in power saving mode. Go back to nap again. */
|
|
cmpwi r11,2
|
|
blt 3f
|
|
/* Supervisor/Hypervisor state loss */
|
|
li r0,1
|
|
stb r0,PACA_NAPSTATELOST(r13)
|
|
3: bl machine_check_queue_event
|
|
MACHINE_CHECK_HANDLER_WINDUP
|
|
GET_PACA(r13)
|
|
ld r1,PACAR1(r13)
|
|
/*
|
|
* Check what idle state this CPU was in and go back to same mode
|
|
* again.
|
|
*/
|
|
lbz r3,PACA_THREAD_IDLE_STATE(r13)
|
|
cmpwi r3,PNV_THREAD_NAP
|
|
bgt 10f
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
|
|
/* No return */
|
|
10:
|
|
cmpwi r3,PNV_THREAD_SLEEP
|
|
bgt 2f
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
|
|
/* No return */
|
|
|
|
2:
|
|
/*
|
|
* Go back to winkle. Please note that this thread was woken up in
|
|
* machine check from winkle and have not restored the per-subcore
|
|
* state. Hence before going back to winkle, set last bit of HSPRG0
|
|
* to 1. This will make sure that if this thread gets woken up
|
|
* again at reset vector 0x100 then it will get chance to restore
|
|
* the subcore state.
|
|
*/
|
|
ori r13,r13,1
|
|
SET_PACA(r13)
|
|
IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
|
|
/* No return */
|
|
4:
|
|
#endif
|
|
/*
|
|
* Check if we are coming from hypervisor userspace. If yes then we
|
|
* continue in host kernel in V mode to deliver the MC event.
|
|
*/
|
|
rldicl. r11,r12,4,63 /* See if MC hit while in HV mode. */
|
|
beq 5f
|
|
andi. r11,r12,MSR_PR /* See if coming from user. */
|
|
bne 9f /* continue in V mode if we are. */
|
|
|
|
5:
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
|
/*
|
|
* We are coming from kernel context. Check if we are coming from
|
|
* guest. if yes, then we can continue. We will fall through
|
|
* do_kvm_200->kvmppc_interrupt to deliver the MC event to guest.
|
|
*/
|
|
lbz r11,HSTATE_IN_GUEST(r13)
|
|
cmpwi r11,0 /* Check if coming from guest */
|
|
bne 9f /* continue if we are. */
|
|
#endif
|
|
/*
|
|
* At this point we are not sure about what context we come from.
|
|
* Queue up the MCE event and return from the interrupt.
|
|
* But before that, check if this is an un-recoverable exception.
|
|
* If yes, then stay on emergency stack and panic.
|
|
*/
|
|
andi. r11,r12,MSR_RI
|
|
bne 2f
|
|
1: mfspr r11,SPRN_SRR0
|
|
LOAD_HANDLER(r10,unrecover_mce)
|
|
mtspr SPRN_SRR0,r10
|
|
ld r10,PACAKMSR(r13)
|
|
/*
|
|
* We are going down. But there are chances that we might get hit by
|
|
* another MCE during panic path and we may run into unstable state
|
|
* with no way out. Hence, turn ME bit off while going down, so that
|
|
* when another MCE is hit during panic path, system will checkstop
|
|
* and hypervisor will get restarted cleanly by SP.
|
|
*/
|
|
li r3,MSR_ME
|
|
andc r10,r10,r3 /* Turn off MSR_ME */
|
|
mtspr SPRN_SRR1,r10
|
|
rfid
|
|
b .
|
|
2:
|
|
/*
|
|
* Check if we have successfully handled/recovered from error, if not
|
|
* then stay on emergency stack and panic.
|
|
*/
|
|
ld r3,RESULT(r1) /* Load result */
|
|
cmpdi r3,0 /* see if we handled MCE successfully */
|
|
|
|
beq 1b /* if !handled then panic */
|
|
/*
|
|
* Return from MC interrupt.
|
|
* Queue up the MCE event so that we can log it later, while
|
|
* returning from kernel or opal call.
|
|
*/
|
|
bl machine_check_queue_event
|
|
MACHINE_CHECK_HANDLER_WINDUP
|
|
rfid
|
|
9:
|
|
/* Deliver the machine check to host kernel in V mode. */
|
|
MACHINE_CHECK_HANDLER_WINDUP
|
|
b machine_check_pSeries
|
|
|
|
EXC_COMMON_BEGIN(unrecover_mce)
|
|
/* Invoke machine_check_exception to print MCE event and panic. */
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl machine_check_exception
|
|
/*
|
|
* We will not reach here. Even if we did, there is no way out. Call
|
|
* unrecoverable_exception and die.
|
|
*/
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl unrecoverable_exception
|
|
b 1b
|
|
|
|
|
|
EXC_REAL(data_access, 0x300, 0x80)
|
|
EXC_VIRT(data_access, 0x4300, 0x80, 0x300)
|
|
TRAMP_KVM_SKIP(PACA_EXGEN, 0x300)
|
|
|
|
EXC_COMMON_BEGIN(data_access_common)
|
|
/*
|
|
* Here r13 points to the paca, r9 contains the saved CR,
|
|
* SRR0 and SRR1 are saved in r11 and r12,
|
|
* r9 - r13 are saved in paca->exgen.
|
|
*/
|
|
mfspr r10,SPRN_DAR
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
mfspr r10,SPRN_DSISR
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
ld r12,_MSR(r1)
|
|
ld r3,PACA_EXGEN+EX_DAR(r13)
|
|
lwz r4,PACA_EXGEN+EX_DSISR(r13)
|
|
li r5,0x300
|
|
std r3,_DAR(r1)
|
|
std r4,_DSISR(r1)
|
|
BEGIN_MMU_FTR_SECTION
|
|
b do_hash_page /* Try to handle as hpte fault */
|
|
MMU_FTR_SECTION_ELSE
|
|
b handle_page_fault
|
|
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
|
|
|
|
|
|
EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
|
|
SET_SCRATCH0(r13)
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x380)
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
mfspr r3,SPRN_DAR
|
|
mfspr r12,SPRN_SRR1
|
|
crset 4*cr6+eq
|
|
#ifndef CONFIG_RELOCATABLE
|
|
b slb_miss_realmode
|
|
#else
|
|
/*
|
|
* We can't just use a direct branch to slb_miss_realmode
|
|
* because the distance from here to there depends on where
|
|
* the kernel ends up being put.
|
|
*/
|
|
mfctr r11
|
|
LOAD_HANDLER(r10, slb_miss_realmode)
|
|
mtctr r10
|
|
bctr
|
|
#endif
|
|
EXC_REAL_END(data_access_slb, 0x380, 0x80)
|
|
|
|
EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80)
|
|
SET_SCRATCH0(r13)
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
mfspr r3,SPRN_DAR
|
|
mfspr r12,SPRN_SRR1
|
|
crset 4*cr6+eq
|
|
#ifndef CONFIG_RELOCATABLE
|
|
b slb_miss_realmode
|
|
#else
|
|
/*
|
|
* We can't just use a direct branch to slb_miss_realmode
|
|
* because the distance from here to there depends on where
|
|
* the kernel ends up being put.
|
|
*/
|
|
mfctr r11
|
|
LOAD_HANDLER(r10, slb_miss_realmode)
|
|
mtctr r10
|
|
bctr
|
|
#endif
|
|
EXC_VIRT_END(data_access_slb, 0x4380, 0x80)
|
|
TRAMP_KVM_SKIP(PACA_EXSLB, 0x380)
|
|
|
|
|
|
EXC_REAL(instruction_access, 0x400, 0x80)
|
|
EXC_VIRT(instruction_access, 0x4400, 0x80, 0x400)
|
|
TRAMP_KVM(PACA_EXGEN, 0x400)
|
|
|
|
EXC_COMMON_BEGIN(instruction_access_common)
|
|
EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
ld r12,_MSR(r1)
|
|
ld r3,_NIP(r1)
|
|
andis. r4,r12,0x5820
|
|
li r5,0x400
|
|
std r3,_DAR(r1)
|
|
std r4,_DSISR(r1)
|
|
BEGIN_MMU_FTR_SECTION
|
|
b do_hash_page /* Try to handle as hpte fault */
|
|
MMU_FTR_SECTION_ELSE
|
|
b handle_page_fault
|
|
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
|
|
|
|
|
|
EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80)
|
|
SET_SCRATCH0(r13)
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480)
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
|
|
mfspr r12,SPRN_SRR1
|
|
crclr 4*cr6+eq
|
|
#ifndef CONFIG_RELOCATABLE
|
|
b slb_miss_realmode
|
|
#else
|
|
mfctr r11
|
|
LOAD_HANDLER(r10, slb_miss_realmode)
|
|
mtctr r10
|
|
bctr
|
|
#endif
|
|
EXC_REAL_END(instruction_access_slb, 0x480, 0x80)
|
|
|
|
EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80)
|
|
SET_SCRATCH0(r13)
|
|
EXCEPTION_PROLOG_0(PACA_EXSLB)
|
|
EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
|
|
std r3,PACA_EXSLB+EX_R3(r13)
|
|
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
|
|
mfspr r12,SPRN_SRR1
|
|
crclr 4*cr6+eq
|
|
#ifndef CONFIG_RELOCATABLE
|
|
b slb_miss_realmode
|
|
#else
|
|
mfctr r11
|
|
LOAD_HANDLER(r10, slb_miss_realmode)
|
|
mtctr r10
|
|
bctr
|
|
#endif
|
|
EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80)
|
|
TRAMP_KVM(PACA_EXSLB, 0x480)
|
|
|
|
|
|
/* This handler is used by both 0x380 and 0x480 slb miss interrupts */
|
|
EXC_COMMON_BEGIN(slb_miss_realmode)
|
|
/*
|
|
* r13 points to the PACA, r9 contains the saved CR,
|
|
* r12 contain the saved SRR1, SRR0 is still ready for return
|
|
* r3 has the faulting address
|
|
* r9 - r13 are saved in paca->exslb.
|
|
* r3 is saved in paca->slb_r3
|
|
* cr6.eq is set for a D-SLB miss, clear for a I-SLB miss
|
|
* We assume we aren't going to take any exceptions during this
|
|
* procedure.
|
|
*/
|
|
mflr r10
|
|
#ifdef CONFIG_RELOCATABLE
|
|
mtctr r11
|
|
#endif
|
|
|
|
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
|
|
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
|
|
std r3,PACA_EXSLB+EX_DAR(r13)
|
|
|
|
crset 4*cr0+eq
|
|
#ifdef CONFIG_PPC_STD_MMU_64
|
|
BEGIN_MMU_FTR_SECTION
|
|
bl slb_allocate_realmode
|
|
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
|
|
#endif
|
|
|
|
ld r10,PACA_EXSLB+EX_LR(r13)
|
|
ld r3,PACA_EXSLB+EX_R3(r13)
|
|
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
|
|
mtlr r10
|
|
|
|
beq 8f /* if bad address, make full stack frame */
|
|
|
|
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
|
|
beq- 2f
|
|
|
|
/* All done -- return from exception. */
|
|
|
|
.machine push
|
|
.machine "power4"
|
|
mtcrf 0x80,r9
|
|
mtcrf 0x02,r9 /* I/D indication is in cr6 */
|
|
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
|
|
.machine pop
|
|
|
|
RESTORE_PPR_PACA(PACA_EXSLB, r9)
|
|
ld r9,PACA_EXSLB+EX_R9(r13)
|
|
ld r10,PACA_EXSLB+EX_R10(r13)
|
|
ld r11,PACA_EXSLB+EX_R11(r13)
|
|
ld r12,PACA_EXSLB+EX_R12(r13)
|
|
ld r13,PACA_EXSLB+EX_R13(r13)
|
|
rfid
|
|
b . /* prevent speculative execution */
|
|
|
|
2: mfspr r11,SPRN_SRR0
|
|
LOAD_HANDLER(r10,unrecov_slb)
|
|
mtspr SPRN_SRR0,r10
|
|
ld r10,PACAKMSR(r13)
|
|
mtspr SPRN_SRR1,r10
|
|
rfid
|
|
b .
|
|
|
|
8: mfspr r11,SPRN_SRR0
|
|
LOAD_HANDLER(r10,bad_addr_slb)
|
|
mtspr SPRN_SRR0,r10
|
|
ld r10,PACAKMSR(r13)
|
|
mtspr SPRN_SRR1,r10
|
|
rfid
|
|
b .
|
|
|
|
EXC_COMMON_BEGIN(unrecov_slb)
|
|
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
bl save_nvgprs
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl unrecoverable_exception
|
|
b 1b
|
|
|
|
EXC_COMMON_BEGIN(bad_addr_slb)
|
|
EXCEPTION_PROLOG_COMMON(0x380, PACA_EXSLB)
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
ld r3, PACA_EXSLB+EX_DAR(r13)
|
|
std r3, _DAR(r1)
|
|
beq cr6, 2f
|
|
li r10, 0x480 /* fix trap number for I-SLB miss */
|
|
std r10, _TRAP(r1)
|
|
2: bl save_nvgprs
|
|
addi r3, r1, STACK_FRAME_OVERHEAD
|
|
bl slb_miss_bad_addr
|
|
b ret_from_except
|
|
|
|
EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100)
|
|
.globl hardware_interrupt_hv;
|
|
hardware_interrupt_hv:
|
|
BEGIN_FTR_SECTION
|
|
_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt_common,
|
|
EXC_HV, SOFTEN_TEST_HV)
|
|
FTR_SECTION_ELSE
|
|
_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt_common,
|
|
EXC_STD, SOFTEN_TEST_PR)
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
|
|
EXC_REAL_END(hardware_interrupt, 0x500, 0x100)
|
|
|
|
EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
|
|
.globl hardware_interrupt_relon_hv;
|
|
hardware_interrupt_relon_hv:
|
|
BEGIN_FTR_SECTION
|
|
_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt_common, EXC_HV, SOFTEN_TEST_HV)
|
|
FTR_SECTION_ELSE
|
|
_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt_common, EXC_STD, SOFTEN_TEST_PR)
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
|
|
EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
|
|
|
|
TRAMP_KVM(PACA_EXGEN, 0x500)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0x500)
|
|
EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ)
|
|
|
|
|
|
EXC_REAL(alignment, 0x600, 0x100)
|
|
EXC_VIRT(alignment, 0x4600, 0x100, 0x600)
|
|
TRAMP_KVM(PACA_EXGEN, 0x600)
|
|
EXC_COMMON_BEGIN(alignment_common)
|
|
mfspr r10,SPRN_DAR
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
mfspr r10,SPRN_DSISR
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
|
|
ld r3,PACA_EXGEN+EX_DAR(r13)
|
|
lwz r4,PACA_EXGEN+EX_DSISR(r13)
|
|
std r3,_DAR(r1)
|
|
std r4,_DSISR(r1)
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl alignment_exception
|
|
b ret_from_except
|
|
|
|
|
|
EXC_REAL(program_check, 0x700, 0x100)
|
|
EXC_VIRT(program_check, 0x4700, 0x100, 0x700)
|
|
TRAMP_KVM(PACA_EXGEN, 0x700)
|
|
EXC_COMMON_BEGIN(program_check_common)
|
|
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl program_check_exception
|
|
b ret_from_except
|
|
|
|
|
|
EXC_REAL(fp_unavailable, 0x800, 0x100)
|
|
EXC_VIRT(fp_unavailable, 0x4800, 0x100, 0x800)
|
|
TRAMP_KVM(PACA_EXGEN, 0x800)
|
|
EXC_COMMON_BEGIN(fp_unavailable_common)
|
|
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
|
|
bne 1f /* if from user, just load it up */
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl kernel_fp_unavailable_exception
|
|
BUG_OPCODE
|
|
1:
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
BEGIN_FTR_SECTION
|
|
/* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
|
|
* transaction), go do TM stuff
|
|
*/
|
|
rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
|
|
bne- 2f
|
|
END_FTR_SECTION_IFSET(CPU_FTR_TM)
|
|
#endif
|
|
bl load_up_fpu
|
|
b fast_exception_return
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
2: /* User process was in a transaction */
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl fp_unavailable_tm
|
|
b ret_from_except
|
|
#endif
|
|
|
|
|
|
EXC_REAL_MASKABLE(decrementer, 0x900, 0x80)
|
|
EXC_VIRT_MASKABLE(decrementer, 0x4900, 0x80, 0x900)
|
|
TRAMP_KVM(PACA_EXGEN, 0x900)
|
|
EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
|
|
|
|
|
|
EXC_REAL_HV(hdecrementer, 0x980, 0x80)
|
|
EXC_VIRT_HV(hdecrementer, 0x4980, 0x80, 0x980)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0x980)
|
|
EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt)
|
|
|
|
|
|
EXC_REAL_MASKABLE(doorbell_super, 0xa00, 0x100)
|
|
EXC_VIRT_MASKABLE(doorbell_super, 0x4a00, 0x100, 0xa00)
|
|
TRAMP_KVM(PACA_EXGEN, 0xa00)
|
|
#ifdef CONFIG_PPC_DOORBELL
|
|
EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception)
|
|
#else
|
|
EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception)
|
|
#endif
|
|
|
|
|
|
EXC_REAL(trap_0b, 0xb00, 0x100)
|
|
EXC_VIRT(trap_0b, 0x4b00, 0x100, 0xb00)
|
|
TRAMP_KVM(PACA_EXGEN, 0xb00)
|
|
EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
|
/*
|
|
* If CONFIG_KVM_BOOK3S_64_HANDLER is set, save the PPR (on systems
|
|
* that support it) before changing to HMT_MEDIUM. That allows the KVM
|
|
* code to save that value into the guest state (it is the guest's PPR
|
|
* value). Otherwise just change to HMT_MEDIUM as userspace has
|
|
* already saved the PPR.
|
|
*/
|
|
#define SYSCALL_KVMTEST \
|
|
SET_SCRATCH0(r13); \
|
|
GET_PACA(r13); \
|
|
std r9,PACA_EXGEN+EX_R9(r13); \
|
|
OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR); \
|
|
HMT_MEDIUM; \
|
|
std r10,PACA_EXGEN+EX_R10(r13); \
|
|
OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r9, CPU_FTR_HAS_PPR); \
|
|
mfcr r9; \
|
|
KVMTEST_PR(0xc00); \
|
|
GET_SCRATCH0(r13)
|
|
|
|
#else
|
|
#define SYSCALL_KVMTEST \
|
|
HMT_MEDIUM
|
|
#endif
|
|
|
|
#define LOAD_SYSCALL_HANDLER(reg) \
|
|
__LOAD_HANDLER(reg, system_call_common)
|
|
|
|
/* Syscall routine is used twice, in reloc-off and reloc-on paths */
|
|
#define SYSCALL_PSERIES_1 \
|
|
BEGIN_FTR_SECTION \
|
|
cmpdi r0,0x1ebe ; \
|
|
beq- 1f ; \
|
|
END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
|
|
mr r9,r13 ; \
|
|
GET_PACA(r13) ; \
|
|
mfspr r11,SPRN_SRR0 ; \
|
|
0:
|
|
|
|
#define SYSCALL_PSERIES_2_RFID \
|
|
mfspr r12,SPRN_SRR1 ; \
|
|
LOAD_SYSCALL_HANDLER(r10) ; \
|
|
mtspr SPRN_SRR0,r10 ; \
|
|
ld r10,PACAKMSR(r13) ; \
|
|
mtspr SPRN_SRR1,r10 ; \
|
|
rfid ; \
|
|
b . ; /* prevent speculative execution */
|
|
|
|
#define SYSCALL_PSERIES_3 \
|
|
/* Fast LE/BE switch system call */ \
|
|
1: mfspr r12,SPRN_SRR1 ; \
|
|
xori r12,r12,MSR_LE ; \
|
|
mtspr SPRN_SRR1,r12 ; \
|
|
rfid ; /* return to userspace */ \
|
|
b . ; /* prevent speculative execution */
|
|
|
|
#if defined(CONFIG_RELOCATABLE)
|
|
/*
|
|
* We can't branch directly so we do it via the CTR which
|
|
* is volatile across system calls.
|
|
*/
|
|
#define SYSCALL_PSERIES_2_DIRECT \
|
|
LOAD_SYSCALL_HANDLER(r12) ; \
|
|
mtctr r12 ; \
|
|
mfspr r12,SPRN_SRR1 ; \
|
|
li r10,MSR_RI ; \
|
|
mtmsrd r10,1 ; \
|
|
bctr ;
|
|
#else
|
|
/* We can branch directly */
|
|
#define SYSCALL_PSERIES_2_DIRECT \
|
|
mfspr r12,SPRN_SRR1 ; \
|
|
li r10,MSR_RI ; \
|
|
mtmsrd r10,1 ; /* Set RI (EE=0) */ \
|
|
b system_call_common ;
|
|
#endif
|
|
|
|
EXC_REAL_BEGIN(system_call, 0xc00, 0x100)
|
|
SYSCALL_KVMTEST
|
|
SYSCALL_PSERIES_1
|
|
SYSCALL_PSERIES_2_RFID
|
|
SYSCALL_PSERIES_3
|
|
EXC_REAL_END(system_call, 0xc00, 0x100)
|
|
|
|
EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100)
|
|
SYSCALL_KVMTEST
|
|
SYSCALL_PSERIES_1
|
|
SYSCALL_PSERIES_2_DIRECT
|
|
SYSCALL_PSERIES_3
|
|
EXC_VIRT_END(system_call, 0x4c00, 0x100)
|
|
|
|
TRAMP_KVM(PACA_EXGEN, 0xc00)
|
|
|
|
|
|
EXC_REAL(single_step, 0xd00, 0x100)
|
|
EXC_VIRT(single_step, 0x4d00, 0x100, 0xd00)
|
|
TRAMP_KVM(PACA_EXGEN, 0xd00)
|
|
EXC_COMMON(single_step_common, 0xd00, single_step_exception)
|
|
|
|
EXC_REAL_OOL_HV(h_data_storage, 0xe00, 0x20)
|
|
EXC_VIRT_OOL_HV(h_data_storage, 0x4e00, 0x20, 0xe00)
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0xe00)
|
|
EXC_COMMON_BEGIN(h_data_storage_common)
|
|
mfspr r10,SPRN_HDAR
|
|
std r10,PACA_EXGEN+EX_DAR(r13)
|
|
mfspr r10,SPRN_HDSISR
|
|
stw r10,PACA_EXGEN+EX_DSISR(r13)
|
|
EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl unknown_exception
|
|
b ret_from_except
|
|
|
|
|
|
EXC_REAL_OOL_HV(h_instr_storage, 0xe20, 0x20)
|
|
EXC_VIRT_OOL_HV(h_instr_storage, 0x4e20, 0x20, 0xe20)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe20)
|
|
EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception)
|
|
|
|
|
|
EXC_REAL_OOL_HV(emulation_assist, 0xe40, 0x20)
|
|
EXC_VIRT_OOL_HV(emulation_assist, 0x4e40, 0x20, 0xe40)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe40)
|
|
EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt)
|
|
|
|
|
|
/*
|
|
* hmi_exception trampoline is a special case. It jumps to hmi_exception_early
|
|
* first, and then eventaully from there to the trampoline to get into virtual
|
|
* mode.
|
|
*/
|
|
__EXC_REAL_OOL_HV_DIRECT(hmi_exception, 0xe60, 0x20, hmi_exception_early)
|
|
__TRAMP_REAL_OOL_MASKABLE_HV(hmi_exception, 0xe60)
|
|
EXC_VIRT_NONE(0x4e60, 0x20)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe60)
|
|
TRAMP_REAL_BEGIN(hmi_exception_early)
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, 0xe60)
|
|
mr r10,r1 /* Save r1 */
|
|
ld r1,PACAEMERGSP(r13) /* Use emergency stack */
|
|
subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
|
|
std r9,_CCR(r1) /* save CR in stackframe */
|
|
mfspr r11,SPRN_HSRR0 /* Save HSRR0 */
|
|
std r11,_NIP(r1) /* save HSRR0 in stackframe */
|
|
mfspr r12,SPRN_HSRR1 /* Save SRR1 */
|
|
std r12,_MSR(r1) /* save SRR1 in stackframe */
|
|
std r10,0(r1) /* make stack chain pointer */
|
|
std r0,GPR0(r1) /* save r0 in stackframe */
|
|
std r10,GPR1(r1) /* save r1 in stackframe */
|
|
EXCEPTION_PROLOG_COMMON_2(PACA_EXGEN)
|
|
EXCEPTION_PROLOG_COMMON_3(0xe60)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
BRANCH_LINK_TO_FAR(hmi_exception_realmode) /* Function call ABI */
|
|
/* Windup the stack. */
|
|
/* Move original HSRR0 and HSRR1 into the respective regs */
|
|
ld r9,_MSR(r1)
|
|
mtspr SPRN_HSRR1,r9
|
|
ld r3,_NIP(r1)
|
|
mtspr SPRN_HSRR0,r3
|
|
ld r9,_CTR(r1)
|
|
mtctr r9
|
|
ld r9,_XER(r1)
|
|
mtxer r9
|
|
ld r9,_LINK(r1)
|
|
mtlr r9
|
|
REST_GPR(0, r1)
|
|
REST_8GPRS(2, r1)
|
|
REST_GPR(10, r1)
|
|
ld r11,_CCR(r1)
|
|
mtcr r11
|
|
REST_GPR(11, r1)
|
|
REST_2GPRS(12, r1)
|
|
/* restore original r1. */
|
|
ld r1,GPR1(r1)
|
|
|
|
/*
|
|
* Go to virtual mode and pull the HMI event information from
|
|
* firmware.
|
|
*/
|
|
.globl hmi_exception_after_realmode
|
|
hmi_exception_after_realmode:
|
|
SET_SCRATCH0(r13)
|
|
EXCEPTION_PROLOG_0(PACA_EXGEN)
|
|
b tramp_real_hmi_exception
|
|
|
|
EXC_COMMON_ASYNC(hmi_exception_common, 0xe60, handle_hmi_exception)
|
|
|
|
|
|
EXC_REAL_OOL_MASKABLE_HV(h_doorbell, 0xe80, 0x20)
|
|
EXC_VIRT_OOL_MASKABLE_HV(h_doorbell, 0x4e80, 0x20, 0xe80)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xe80)
|
|
#ifdef CONFIG_PPC_DOORBELL
|
|
EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception)
|
|
#else
|
|
EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception)
|
|
#endif
|
|
|
|
|
|
EXC_REAL_OOL_MASKABLE_HV(h_virt_irq, 0xea0, 0x20)
|
|
EXC_VIRT_OOL_MASKABLE_HV(h_virt_irq, 0x4ea0, 0x20, 0xea0)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xea0)
|
|
EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ)
|
|
|
|
|
|
EXC_REAL_NONE(0xec0, 0x20)
|
|
EXC_VIRT_NONE(0x4ec0, 0x20)
|
|
EXC_REAL_NONE(0xee0, 0x20)
|
|
EXC_VIRT_NONE(0x4ee0, 0x20)
|
|
|
|
|
|
EXC_REAL_OOL(performance_monitor, 0xf00, 0x20)
|
|
EXC_VIRT_OOL(performance_monitor, 0x4f00, 0x20, 0xf00)
|
|
TRAMP_KVM(PACA_EXGEN, 0xf00)
|
|
EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception)
|
|
|
|
|
|
EXC_REAL_OOL(altivec_unavailable, 0xf20, 0x20)
|
|
EXC_VIRT_OOL(altivec_unavailable, 0x4f20, 0x20, 0xf20)
|
|
TRAMP_KVM(PACA_EXGEN, 0xf20)
|
|
EXC_COMMON_BEGIN(altivec_unavailable_common)
|
|
EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
|
|
#ifdef CONFIG_ALTIVEC
|
|
BEGIN_FTR_SECTION
|
|
beq 1f
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
BEGIN_FTR_SECTION_NESTED(69)
|
|
/* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
|
|
* transaction), go do TM stuff
|
|
*/
|
|
rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
|
|
bne- 2f
|
|
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
|
|
#endif
|
|
bl load_up_altivec
|
|
b fast_exception_return
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
2: /* User process was in a transaction */
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl altivec_unavailable_tm
|
|
b ret_from_except
|
|
#endif
|
|
1:
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
|
|
#endif
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl altivec_unavailable_exception
|
|
b ret_from_except
|
|
|
|
|
|
EXC_REAL_OOL(vsx_unavailable, 0xf40, 0x20)
|
|
EXC_VIRT_OOL(vsx_unavailable, 0x4f40, 0x20, 0xf40)
|
|
TRAMP_KVM(PACA_EXGEN, 0xf40)
|
|
EXC_COMMON_BEGIN(vsx_unavailable_common)
|
|
EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
|
|
#ifdef CONFIG_VSX
|
|
BEGIN_FTR_SECTION
|
|
beq 1f
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
BEGIN_FTR_SECTION_NESTED(69)
|
|
/* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
|
|
* transaction), go do TM stuff
|
|
*/
|
|
rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
|
|
bne- 2f
|
|
END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
|
|
#endif
|
|
b load_up_vsx
|
|
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
|
|
2: /* User process was in a transaction */
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl vsx_unavailable_tm
|
|
b ret_from_except
|
|
#endif
|
|
1:
|
|
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
|
|
#endif
|
|
bl save_nvgprs
|
|
RECONCILE_IRQ_STATE(r10, r11)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl vsx_unavailable_exception
|
|
b ret_from_except
|
|
|
|
|
|
EXC_REAL_OOL(facility_unavailable, 0xf60, 0x20)
|
|
EXC_VIRT_OOL(facility_unavailable, 0x4f60, 0x20, 0xf60)
|
|
TRAMP_KVM(PACA_EXGEN, 0xf60)
|
|
EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
|
|
|
|
|
|
EXC_REAL_OOL_HV(h_facility_unavailable, 0xf80, 0x20)
|
|
EXC_VIRT_OOL_HV(h_facility_unavailable, 0x4f80, 0x20, 0xf80)
|
|
TRAMP_KVM_HV(PACA_EXGEN, 0xf80)
|
|
EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
|
|
|
|
|
|
EXC_REAL_NONE(0xfa0, 0x20)
|
|
EXC_VIRT_NONE(0x4fa0, 0x20)
|
|
EXC_REAL_NONE(0xfc0, 0x20)
|
|
EXC_VIRT_NONE(0x4fc0, 0x20)
|
|
EXC_REAL_NONE(0xfe0, 0x20)
|
|
EXC_VIRT_NONE(0x4fe0, 0x20)
|
|
|
|
EXC_REAL_NONE(0x1000, 0x100)
|
|
EXC_VIRT_NONE(0x5000, 0x100)
|
|
EXC_REAL_NONE(0x1100, 0x100)
|
|
EXC_VIRT_NONE(0x5100, 0x100)
|
|
|
|
#ifdef CONFIG_CBE_RAS
|
|
EXC_REAL_HV(cbe_system_error, 0x1200, 0x100)
|
|
EXC_VIRT_NONE(0x5200, 0x100)
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1200)
|
|
EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception)
|
|
#else /* CONFIG_CBE_RAS */
|
|
EXC_REAL_NONE(0x1200, 0x100)
|
|
EXC_VIRT_NONE(0x5200, 0x100)
|
|
#endif
|
|
|
|
|
|
EXC_REAL(instruction_breakpoint, 0x1300, 0x100)
|
|
EXC_VIRT(instruction_breakpoint, 0x5300, 0x100, 0x1300)
|
|
TRAMP_KVM_SKIP(PACA_EXGEN, 0x1300)
|
|
EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception)
|
|
|
|
EXC_REAL_NONE(0x1400, 0x100)
|
|
EXC_VIRT_NONE(0x5400, 0x100)
|
|
|
|
EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100)
|
|
mtspr SPRN_SPRG_HSCRATCH0,r13
|
|
EXCEPTION_PROLOG_0(PACA_EXGEN)
|
|
EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
|
|
|
|
#ifdef CONFIG_PPC_DENORMALISATION
|
|
mfspr r10,SPRN_HSRR1
|
|
mfspr r11,SPRN_HSRR0 /* save HSRR0 */
|
|
andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */
|
|
addi r11,r11,-4 /* HSRR0 is next instruction */
|
|
bne+ denorm_assist
|
|
#endif
|
|
|
|
KVMTEST_PR(0x1500)
|
|
EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
|
|
EXC_REAL_END(denorm_exception_hv, 0x1500, 0x100)
|
|
|
|
#ifdef CONFIG_PPC_DENORMALISATION
|
|
EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100)
|
|
b exc_real_0x1500_denorm_exception_hv
|
|
EXC_VIRT_END(denorm_exception, 0x5500, 0x100)
|
|
#else
|
|
EXC_VIRT_NONE(0x5500, 0x100)
|
|
#endif
|
|
|
|
TRAMP_KVM_SKIP(PACA_EXGEN, 0x1500)
|
|
|
|
#ifdef CONFIG_PPC_DENORMALISATION
|
|
TRAMP_REAL_BEGIN(denorm_assist)
|
|
BEGIN_FTR_SECTION
|
|
/*
|
|
* To denormalise we need to move a copy of the register to itself.
|
|
* For POWER6 do that here for all FP regs.
|
|
*/
|
|
mfmsr r10
|
|
ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
|
|
xori r10,r10,(MSR_FE0|MSR_FE1)
|
|
mtmsrd r10
|
|
sync
|
|
|
|
#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1
|
|
#define FMR4(n) FMR2(n) ; FMR2(n+2)
|
|
#define FMR8(n) FMR4(n) ; FMR4(n+4)
|
|
#define FMR16(n) FMR8(n) ; FMR8(n+8)
|
|
#define FMR32(n) FMR16(n) ; FMR16(n+16)
|
|
FMR32(0)
|
|
|
|
FTR_SECTION_ELSE
|
|
/*
|
|
* To denormalise we need to move a copy of the register to itself.
|
|
* For POWER7 do that here for the first 32 VSX registers only.
|
|
*/
|
|
mfmsr r10
|
|
oris r10,r10,MSR_VSX@h
|
|
mtmsrd r10
|
|
sync
|
|
|
|
#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1)
|
|
#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2)
|
|
#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4)
|
|
#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8)
|
|
#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16)
|
|
XVCPSGNDP32(0)
|
|
|
|
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
|
|
|
|
BEGIN_FTR_SECTION
|
|
b denorm_done
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
|
|
/*
|
|
* To denormalise we need to move a copy of the register to itself.
|
|
* For POWER8 we need to do that for all 64 VSX registers
|
|
*/
|
|
XVCPSGNDP32(32)
|
|
denorm_done:
|
|
mtspr SPRN_HSRR0,r11
|
|
mtcrf 0x80,r9
|
|
ld r9,PACA_EXGEN+EX_R9(r13)
|
|
RESTORE_PPR_PACA(PACA_EXGEN, r10)
|
|
BEGIN_FTR_SECTION
|
|
ld r10,PACA_EXGEN+EX_CFAR(r13)
|
|
mtspr SPRN_CFAR,r10
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
|
|
ld r10,PACA_EXGEN+EX_R10(r13)
|
|
ld r11,PACA_EXGEN+EX_R11(r13)
|
|
ld r12,PACA_EXGEN+EX_R12(r13)
|
|
ld r13,PACA_EXGEN+EX_R13(r13)
|
|
HRFID
|
|
b .
|
|
#endif
|
|
|
|
EXC_COMMON_HV(denorm_common, 0x1500, unknown_exception)
|
|
|
|
|
|
#ifdef CONFIG_CBE_RAS
|
|
EXC_REAL_HV(cbe_maintenance, 0x1600, 0x100)
|
|
EXC_VIRT_NONE(0x5600, 0x100)
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1600)
|
|
EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception)
|
|
#else /* CONFIG_CBE_RAS */
|
|
EXC_REAL_NONE(0x1600, 0x100)
|
|
EXC_VIRT_NONE(0x5600, 0x100)
|
|
#endif
|
|
|
|
|
|
EXC_REAL(altivec_assist, 0x1700, 0x100)
|
|
EXC_VIRT(altivec_assist, 0x5700, 0x100, 0x1700)
|
|
TRAMP_KVM(PACA_EXGEN, 0x1700)
|
|
#ifdef CONFIG_ALTIVEC
|
|
EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception)
|
|
#else
|
|
EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception)
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_CBE_RAS
|
|
EXC_REAL_HV(cbe_thermal, 0x1800, 0x100)
|
|
EXC_VIRT_NONE(0x5800, 0x100)
|
|
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1800)
|
|
EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
|
|
#else /* CONFIG_CBE_RAS */
|
|
EXC_REAL_NONE(0x1800, 0x100)
|
|
EXC_VIRT_NONE(0x5800, 0x100)
|
|
#endif
|
|
|
|
|
|
/*
|
|
* An interrupt came in while soft-disabled. We set paca->irq_happened, then:
|
|
* - If it was a decrementer interrupt, we bump the dec to max and and return.
|
|
* - If it was a doorbell we return immediately since doorbells are edge
|
|
* triggered and won't automatically refire.
|
|
* - If it was a HMI we return immediately since we handled it in realmode
|
|
* and it won't refire.
|
|
* - else we hard disable and return.
|
|
* This is called with r10 containing the value to OR to the paca field.
|
|
*/
|
|
#define MASKED_INTERRUPT(_H) \
|
|
masked_##_H##interrupt: \
|
|
std r11,PACA_EXGEN+EX_R11(r13); \
|
|
lbz r11,PACAIRQHAPPENED(r13); \
|
|
or r11,r11,r10; \
|
|
stb r11,PACAIRQHAPPENED(r13); \
|
|
cmpwi r10,PACA_IRQ_DEC; \
|
|
bne 1f; \
|
|
lis r10,0x7fff; \
|
|
ori r10,r10,0xffff; \
|
|
mtspr SPRN_DEC,r10; \
|
|
b 2f; \
|
|
1: cmpwi r10,PACA_IRQ_DBELL; \
|
|
beq 2f; \
|
|
cmpwi r10,PACA_IRQ_HMI; \
|
|
beq 2f; \
|
|
mfspr r10,SPRN_##_H##SRR1; \
|
|
rldicl r10,r10,48,1; /* clear MSR_EE */ \
|
|
rotldi r10,r10,16; \
|
|
mtspr SPRN_##_H##SRR1,r10; \
|
|
2: mtcrf 0x80,r9; \
|
|
ld r9,PACA_EXGEN+EX_R9(r13); \
|
|
ld r10,PACA_EXGEN+EX_R10(r13); \
|
|
ld r11,PACA_EXGEN+EX_R11(r13); \
|
|
GET_SCRATCH0(r13); \
|
|
##_H##rfid; \
|
|
b .
|
|
|
|
/*
|
|
* Real mode exceptions actually use this too, but alternate
|
|
* instruction code patches (which end up in the common .text area)
|
|
* cannot reach these if they are put there.
|
|
*/
|
|
USE_FIXED_SECTION(virt_trampolines)
|
|
MASKED_INTERRUPT()
|
|
MASKED_INTERRUPT(H)
|
|
|
|
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
|
|
TRAMP_REAL_BEGIN(kvmppc_skip_interrupt)
|
|
/*
|
|
* Here all GPRs are unchanged from when the interrupt happened
|
|
* except for r13, which is saved in SPRG_SCRATCH0.
|
|
*/
|
|
mfspr r13, SPRN_SRR0
|
|
addi r13, r13, 4
|
|
mtspr SPRN_SRR0, r13
|
|
GET_SCRATCH0(r13)
|
|
rfid
|
|
b .
|
|
|
|
TRAMP_REAL_BEGIN(kvmppc_skip_Hinterrupt)
|
|
/*
|
|
* Here all GPRs are unchanged from when the interrupt happened
|
|
* except for r13, which is saved in SPRG_SCRATCH0.
|
|
*/
|
|
mfspr r13, SPRN_HSRR0
|
|
addi r13, r13, 4
|
|
mtspr SPRN_HSRR0, r13
|
|
GET_SCRATCH0(r13)
|
|
hrfid
|
|
b .
|
|
#endif
|
|
|
|
/*
|
|
* Ensure that any handlers that get invoked from the exception prologs
|
|
* above are below the first 64KB (0x10000) of the kernel image because
|
|
* the prologs assemble the addresses of these handlers using the
|
|
* LOAD_HANDLER macro, which uses an ori instruction.
|
|
*/
|
|
|
|
/*** Common interrupt handlers ***/
|
|
|
|
|
|
/*
|
|
* Relocation-on interrupts: A subset of the interrupts can be delivered
|
|
* with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
|
|
* it. Addresses are the same as the original interrupt addresses, but
|
|
* offset by 0xc000000000004000.
|
|
* It's impossible to receive interrupts below 0x300 via this mechanism.
|
|
* KVM: None of these traps are from the guest ; anything that escalated
|
|
* to HV=1 from HV=0 is delivered via real mode handlers.
|
|
*/
|
|
|
|
/*
|
|
* This uses the standard macro, since the original 0x300 vector
|
|
* only has extra guff for STAB-based processors -- which never
|
|
* come here.
|
|
*/
|
|
|
|
EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline)
|
|
b __ppc64_runlatch_on
|
|
|
|
USE_FIXED_SECTION(virt_trampolines)
|
|
/*
|
|
* The __end_interrupts marker must be past the out-of-line (OOL)
|
|
* handlers, so that they are copied to real address 0x100 when running
|
|
* a relocatable kernel. This ensures they can be reached from the short
|
|
* trampoline handlers (like 0x4f00, 0x4f20, etc.) which branch
|
|
* directly, without using LOAD_HANDLER().
|
|
*/
|
|
.align 7
|
|
.globl __end_interrupts
|
|
__end_interrupts:
|
|
DEFINE_FIXED_SYMBOL(__end_interrupts)
|
|
|
|
#ifdef CONFIG_PPC_970_NAP
|
|
EXC_COMMON_BEGIN(power4_fixup_nap)
|
|
andc r9,r9,r10
|
|
std r9,TI_LOCAL_FLAGS(r11)
|
|
ld r10,_LINK(r1) /* make idle task do the */
|
|
std r10,_NIP(r1) /* equivalent of a blr */
|
|
blr
|
|
#endif
|
|
|
|
CLOSE_FIXED_SECTION(real_vectors);
|
|
CLOSE_FIXED_SECTION(real_trampolines);
|
|
CLOSE_FIXED_SECTION(virt_vectors);
|
|
CLOSE_FIXED_SECTION(virt_trampolines);
|
|
|
|
USE_TEXT_SECTION()
|
|
|
|
/*
|
|
* Hash table stuff
|
|
*/
|
|
.balign IFETCH_ALIGN_BYTES
|
|
do_hash_page:
|
|
#ifdef CONFIG_PPC_STD_MMU_64
|
|
andis. r0,r4,0xa410 /* weird error? */
|
|
bne- handle_page_fault /* if not, try to insert a HPTE */
|
|
andis. r0,r4,DSISR_DABRMATCH@h
|
|
bne- handle_dabr_fault
|
|
CURRENT_THREAD_INFO(r11, r1)
|
|
lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
|
|
andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */
|
|
bne 77f /* then don't call hash_page now */
|
|
|
|
/*
|
|
* r3 contains the faulting address
|
|
* r4 msr
|
|
* r5 contains the trap number
|
|
* r6 contains dsisr
|
|
*
|
|
* at return r3 = 0 for success, 1 for page fault, negative for error
|
|
*/
|
|
mr r4,r12
|
|
ld r6,_DSISR(r1)
|
|
bl __hash_page /* build HPTE if possible */
|
|
cmpdi r3,0 /* see if __hash_page succeeded */
|
|
|
|
/* Success */
|
|
beq fast_exc_return_irq /* Return from exception on success */
|
|
|
|
/* Error */
|
|
blt- 13f
|
|
#endif /* CONFIG_PPC_STD_MMU_64 */
|
|
|
|
/* Here we have a page fault that hash_page can't handle. */
|
|
handle_page_fault:
|
|
11: ld r4,_DAR(r1)
|
|
ld r5,_DSISR(r1)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl do_page_fault
|
|
cmpdi r3,0
|
|
beq+ 12f
|
|
bl save_nvgprs
|
|
mr r5,r3
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
lwz r4,_DAR(r1)
|
|
bl bad_page_fault
|
|
b ret_from_except
|
|
|
|
/* We have a data breakpoint exception - handle it */
|
|
handle_dabr_fault:
|
|
bl save_nvgprs
|
|
ld r4,_DAR(r1)
|
|
ld r5,_DSISR(r1)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl do_break
|
|
12: b ret_from_except_lite
|
|
|
|
|
|
#ifdef CONFIG_PPC_STD_MMU_64
|
|
/* We have a page fault that hash_page could handle but HV refused
|
|
* the PTE insertion
|
|
*/
|
|
13: bl save_nvgprs
|
|
mr r5,r3
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
ld r4,_DAR(r1)
|
|
bl low_hash_fault
|
|
b ret_from_except
|
|
#endif
|
|
|
|
/*
|
|
* We come here as a result of a DSI at a point where we don't want
|
|
* to call hash_page, such as when we are accessing memory (possibly
|
|
* user memory) inside a PMU interrupt that occurred while interrupts
|
|
* were soft-disabled. We want to invoke the exception handler for
|
|
* the access, or panic if there isn't a handler.
|
|
*/
|
|
77: bl save_nvgprs
|
|
mr r4,r3
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
li r5,SIGSEGV
|
|
bl bad_page_fault
|
|
b ret_from_except
|
|
|
|
/*
|
|
* Here we have detected that the kernel stack pointer is bad.
|
|
* R9 contains the saved CR, r13 points to the paca,
|
|
* r10 contains the (bad) kernel stack pointer,
|
|
* r11 and r12 contain the saved SRR0 and SRR1.
|
|
* We switch to using an emergency stack, save the registers there,
|
|
* and call kernel_bad_stack(), which panics.
|
|
*/
|
|
bad_stack:
|
|
ld r1,PACAEMERGSP(r13)
|
|
subi r1,r1,64+INT_FRAME_SIZE
|
|
std r9,_CCR(r1)
|
|
std r10,GPR1(r1)
|
|
std r11,_NIP(r1)
|
|
std r12,_MSR(r1)
|
|
mfspr r11,SPRN_DAR
|
|
mfspr r12,SPRN_DSISR
|
|
std r11,_DAR(r1)
|
|
std r12,_DSISR(r1)
|
|
mflr r10
|
|
mfctr r11
|
|
mfxer r12
|
|
std r10,_LINK(r1)
|
|
std r11,_CTR(r1)
|
|
std r12,_XER(r1)
|
|
SAVE_GPR(0,r1)
|
|
SAVE_GPR(2,r1)
|
|
ld r10,EX_R3(r3)
|
|
std r10,GPR3(r1)
|
|
SAVE_GPR(4,r1)
|
|
SAVE_4GPRS(5,r1)
|
|
ld r9,EX_R9(r3)
|
|
ld r10,EX_R10(r3)
|
|
SAVE_2GPRS(9,r1)
|
|
ld r9,EX_R11(r3)
|
|
ld r10,EX_R12(r3)
|
|
ld r11,EX_R13(r3)
|
|
std r9,GPR11(r1)
|
|
std r10,GPR12(r1)
|
|
std r11,GPR13(r1)
|
|
BEGIN_FTR_SECTION
|
|
ld r10,EX_CFAR(r3)
|
|
std r10,ORIG_GPR3(r1)
|
|
END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
|
|
SAVE_8GPRS(14,r1)
|
|
SAVE_10GPRS(22,r1)
|
|
lhz r12,PACA_TRAP_SAVE(r13)
|
|
std r12,_TRAP(r1)
|
|
addi r11,r1,INT_FRAME_SIZE
|
|
std r11,0(r1)
|
|
li r12,0
|
|
std r12,0(r11)
|
|
ld r2,PACATOC(r13)
|
|
ld r11,exception_marker@toc(r2)
|
|
std r12,RESULT(r1)
|
|
std r11,STACK_FRAME_OVERHEAD-16(r1)
|
|
1: addi r3,r1,STACK_FRAME_OVERHEAD
|
|
bl kernel_bad_stack
|
|
b 1b
|
|
|
|
/*
|
|
* Called from arch_local_irq_enable when an interrupt needs
|
|
* to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
|
|
* which kind of interrupt. MSR:EE is already off. We generate a
|
|
* stackframe like if a real interrupt had happened.
|
|
*
|
|
* Note: While MSR:EE is off, we need to make sure that _MSR
|
|
* in the generated frame has EE set to 1 or the exception
|
|
* handler will not properly re-enable them.
|
|
*/
|
|
_GLOBAL(__replay_interrupt)
|
|
/* We are going to jump to the exception common code which
|
|
* will retrieve various register values from the PACA which
|
|
* we don't give a damn about, so we don't bother storing them.
|
|
*/
|
|
mfmsr r12
|
|
mflr r11
|
|
mfcr r9
|
|
ori r12,r12,MSR_EE
|
|
cmpwi r3,0x900
|
|
beq decrementer_common
|
|
cmpwi r3,0x500
|
|
beq hardware_interrupt_common
|
|
BEGIN_FTR_SECTION
|
|
cmpwi r3,0xe80
|
|
beq h_doorbell_common
|
|
cmpwi r3,0xea0
|
|
beq h_virt_irq_common
|
|
cmpwi r3,0xe60
|
|
beq hmi_exception_common
|
|
FTR_SECTION_ELSE
|
|
cmpwi r3,0xa00
|
|
beq doorbell_super_common
|
|
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
|
|
blr
|