mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
9ec54934ce
The rtt-upiu packets precede any data-out upiu packets, thus synchronizing the data input to the device: this mostly applies to write operations, but there are other operations that requires rtt as well. There are several rules binding this rtt - data-out dialog, specifically There can be at most outstanding bMaxNumOfRTT such packets. This might have an effect on write performance (sequential write in particular), as each data-out upiu must wait for its rtt sibling. UFSHCI expects bMaxNumOfRTT to be min(bDeviceRTTCap, NORTT). However, as of today, there does not appears to be no-one who sets it: not the host controller nor the driver. It wasn't an issue up to now: bMaxNumOfRTT is set to 2 after manufacturing, and wasn't limiting the write performance. UFS4.0, and specifically gear 5 changes this, and requires the device to be more attentive. This doesn't come free - the device has to allocate more resources to that end, but the sequential write performance improvement is significant. Early measurements shows 25% gain when moving from rtt 2 to 9. Therefore, set bMaxNumOfRTT to be min(bDeviceRTTCap, NORTT) as UFSHCI expects. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20240530142510.734-2-avri.altman@wdc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
605 lines
15 KiB
C
605 lines
15 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Universal Flash Storage Host controller driver
|
|
* Copyright (C) 2011-2013 Samsung India Software Operations
|
|
*
|
|
* Authors:
|
|
* Santosh Yaraganavi <santosh.sy@samsung.com>
|
|
* Vinayak Holikatti <h.vinayak@samsung.com>
|
|
*/
|
|
|
|
#ifndef _UFSHCI_H
|
|
#define _UFSHCI_H
|
|
|
|
#include <linux/types.h>
|
|
#include <ufs/ufs.h>
|
|
|
|
enum {
|
|
TASK_REQ_UPIU_SIZE_DWORDS = 8,
|
|
TASK_RSP_UPIU_SIZE_DWORDS = 8,
|
|
ALIGNED_UPIU_SIZE = 512,
|
|
};
|
|
|
|
/* UFSHCI Registers */
|
|
enum {
|
|
REG_CONTROLLER_CAPABILITIES = 0x00,
|
|
REG_MCQCAP = 0x04,
|
|
REG_UFS_VERSION = 0x08,
|
|
REG_CONTROLLER_DEV_ID = 0x10,
|
|
REG_CONTROLLER_PROD_ID = 0x14,
|
|
REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18,
|
|
REG_INTERRUPT_STATUS = 0x20,
|
|
REG_INTERRUPT_ENABLE = 0x24,
|
|
REG_CONTROLLER_STATUS = 0x30,
|
|
REG_CONTROLLER_ENABLE = 0x34,
|
|
REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
|
|
REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
|
|
REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
|
|
REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
|
|
REG_UIC_ERROR_CODE_DME = 0x48,
|
|
REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
|
|
REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
|
|
REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
|
|
REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
|
|
REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
|
|
REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
|
|
REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
|
|
REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
|
|
REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
|
|
REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
|
|
REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
|
|
REG_UIC_COMMAND = 0x90,
|
|
REG_UIC_COMMAND_ARG_1 = 0x94,
|
|
REG_UIC_COMMAND_ARG_2 = 0x98,
|
|
REG_UIC_COMMAND_ARG_3 = 0x9C,
|
|
|
|
UFSHCI_REG_SPACE_SIZE = 0xA0,
|
|
|
|
REG_UFS_CCAP = 0x100,
|
|
REG_UFS_CRYPTOCAP = 0x104,
|
|
|
|
REG_UFS_MEM_CFG = 0x300,
|
|
REG_UFS_MCQ_CFG = 0x380,
|
|
REG_UFS_ESILBA = 0x384,
|
|
REG_UFS_ESIUBA = 0x388,
|
|
UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
|
|
};
|
|
|
|
/* Controller capability masks */
|
|
enum {
|
|
MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
|
|
MASK_NUMBER_OUTSTANDING_RTT = 0x0000FF00,
|
|
MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
|
|
MASK_EHSLUTRD_SUPPORTED = 0x00400000,
|
|
MASK_AUTO_HIBERN8_SUPPORT = 0x00800000,
|
|
MASK_64_ADDRESSING_SUPPORT = 0x01000000,
|
|
MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
|
|
MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
|
|
MASK_CRYPTO_SUPPORT = 0x10000000,
|
|
MASK_MCQ_SUPPORT = 0x40000000,
|
|
};
|
|
|
|
/* MCQ capability mask */
|
|
enum {
|
|
MASK_EXT_IID_SUPPORT = 0x00000400,
|
|
};
|
|
|
|
enum {
|
|
REG_SQATTR = 0x0,
|
|
REG_SQLBA = 0x4,
|
|
REG_SQUBA = 0x8,
|
|
REG_SQDAO = 0xC,
|
|
REG_SQISAO = 0x10,
|
|
|
|
REG_CQATTR = 0x20,
|
|
REG_CQLBA = 0x24,
|
|
REG_CQUBA = 0x28,
|
|
REG_CQDAO = 0x2C,
|
|
REG_CQISAO = 0x30,
|
|
};
|
|
|
|
enum {
|
|
REG_SQHP = 0x0,
|
|
REG_SQTP = 0x4,
|
|
REG_SQRTC = 0x8,
|
|
REG_SQCTI = 0xC,
|
|
REG_SQRTS = 0x10,
|
|
};
|
|
|
|
enum {
|
|
REG_CQHP = 0x0,
|
|
REG_CQTP = 0x4,
|
|
};
|
|
|
|
enum {
|
|
REG_CQIS = 0x0,
|
|
REG_CQIE = 0x4,
|
|
};
|
|
|
|
enum {
|
|
SQ_START = 0x0,
|
|
SQ_STOP = 0x1,
|
|
SQ_ICU = 0x2,
|
|
};
|
|
|
|
enum {
|
|
SQ_STS = 0x1,
|
|
SQ_CUS = 0x2,
|
|
};
|
|
|
|
#define SQ_ICU_ERR_CODE_MASK GENMASK(7, 4)
|
|
#define UFS_MASK(mask, offset) ((mask) << (offset))
|
|
|
|
/* UFS Version 08h */
|
|
#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
|
|
#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
|
|
|
|
#define UFSHCD_NUM_RESERVED 1
|
|
/*
|
|
* Controller UFSHCI version
|
|
* - 2.x and newer use the following scheme:
|
|
* major << 8 + minor << 4
|
|
* - 1.x has been converted to match this in
|
|
* ufshcd_get_ufs_version()
|
|
*/
|
|
static inline u32 ufshci_version(u32 major, u32 minor)
|
|
{
|
|
return (major << 8) + (minor << 4);
|
|
}
|
|
|
|
/*
|
|
* HCDDID - Host Controller Identification Descriptor
|
|
* - Device ID and Device Class 10h
|
|
*/
|
|
#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
|
|
#define DEVICE_ID UFS_MASK(0xFF, 24)
|
|
|
|
/*
|
|
* HCPMID - Host Controller Identification Descriptor
|
|
* - Product/Manufacturer ID 14h
|
|
*/
|
|
#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
|
|
#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
|
|
|
|
/* AHIT - Auto-Hibernate Idle Timer */
|
|
#define UFSHCI_AHIBERN8_TIMER_MASK GENMASK(9, 0)
|
|
#define UFSHCI_AHIBERN8_SCALE_MASK GENMASK(12, 10)
|
|
#define UFSHCI_AHIBERN8_SCALE_FACTOR 10
|
|
#define UFSHCI_AHIBERN8_MAX (1023 * 100000)
|
|
|
|
/*
|
|
* IS - Interrupt Status - 20h
|
|
*/
|
|
#define UTP_TRANSFER_REQ_COMPL 0x1
|
|
#define UIC_DME_END_PT_RESET 0x2
|
|
#define UIC_ERROR 0x4
|
|
#define UIC_TEST_MODE 0x8
|
|
#define UIC_POWER_MODE 0x10
|
|
#define UIC_HIBERNATE_EXIT 0x20
|
|
#define UIC_HIBERNATE_ENTER 0x40
|
|
#define UIC_LINK_LOST 0x80
|
|
#define UIC_LINK_STARTUP 0x100
|
|
#define UTP_TASK_REQ_COMPL 0x200
|
|
#define UIC_COMMAND_COMPL 0x400
|
|
#define DEVICE_FATAL_ERROR 0x800
|
|
#define CONTROLLER_FATAL_ERROR 0x10000
|
|
#define SYSTEM_BUS_FATAL_ERROR 0x20000
|
|
#define CRYPTO_ENGINE_FATAL_ERROR 0x40000
|
|
#define MCQ_CQ_EVENT_STATUS 0x100000
|
|
|
|
#define UFSHCD_UIC_HIBERN8_MASK (UIC_HIBERNATE_ENTER |\
|
|
UIC_HIBERNATE_EXIT)
|
|
|
|
#define UFSHCD_UIC_PWR_MASK (UFSHCD_UIC_HIBERN8_MASK |\
|
|
UIC_POWER_MODE)
|
|
|
|
#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
|
|
|
|
#define UFSHCD_ERROR_MASK (UIC_ERROR | INT_FATAL_ERRORS)
|
|
|
|
#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
|
|
CONTROLLER_FATAL_ERROR |\
|
|
SYSTEM_BUS_FATAL_ERROR |\
|
|
CRYPTO_ENGINE_FATAL_ERROR |\
|
|
UIC_LINK_LOST)
|
|
|
|
/* HCS - Host Controller Status 30h */
|
|
#define DEVICE_PRESENT 0x1
|
|
#define UTP_TRANSFER_REQ_LIST_READY 0x2
|
|
#define UTP_TASK_REQ_LIST_READY 0x4
|
|
#define UIC_COMMAND_READY 0x8
|
|
#define HOST_ERROR_INDICATOR 0x10
|
|
#define DEVICE_ERROR_INDICATOR 0x20
|
|
#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
|
|
|
|
#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\
|
|
UTP_TASK_REQ_LIST_READY |\
|
|
UIC_COMMAND_READY)
|
|
|
|
enum {
|
|
PWR_OK = 0x0,
|
|
PWR_LOCAL = 0x01,
|
|
PWR_REMOTE = 0x02,
|
|
PWR_BUSY = 0x03,
|
|
PWR_ERROR_CAP = 0x04,
|
|
PWR_FATAL_ERROR = 0x05,
|
|
};
|
|
|
|
/* HCE - Host Controller Enable 34h */
|
|
#define CONTROLLER_ENABLE 0x1
|
|
#define CONTROLLER_DISABLE 0x0
|
|
#define CRYPTO_GENERAL_ENABLE 0x2
|
|
|
|
/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
|
|
#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000
|
|
#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
|
|
#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF
|
|
#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR 0x10
|
|
|
|
/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
|
|
#define UIC_DATA_LINK_LAYER_ERROR 0x80000000
|
|
#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0xFFFF
|
|
#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP 0x2
|
|
#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP 0x4
|
|
#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP 0x8
|
|
#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF 0x20
|
|
#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
|
|
#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
|
|
#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
|
|
|
|
/* UECN - Host UIC Error Code Network Layer 40h */
|
|
#define UIC_NETWORK_LAYER_ERROR 0x80000000
|
|
#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
|
|
#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE 0x1
|
|
#define UIC_NETWORK_BAD_DEVICEID_ENC 0x2
|
|
#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING 0x4
|
|
|
|
/* UECT - Host UIC Error Code Transport Layer 44h */
|
|
#define UIC_TRANSPORT_LAYER_ERROR 0x80000000
|
|
#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
|
|
#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE 0x1
|
|
#define UIC_TRANSPORT_UNKNOWN_CPORTID 0x2
|
|
#define UIC_TRANSPORT_NO_CONNECTION_RX 0x4
|
|
#define UIC_TRANSPORT_CONTROLLED_SEGMENT_DROPPING 0x8
|
|
#define UIC_TRANSPORT_BAD_TC 0x10
|
|
#define UIC_TRANSPORT_E2E_CREDIT_OVERFOW 0x20
|
|
#define UIC_TRANSPORT_SAFETY_VALUE_DROPPING 0x40
|
|
|
|
/* UECDME - Host UIC Error Code DME 48h */
|
|
#define UIC_DME_ERROR 0x80000000
|
|
#define UIC_DME_ERROR_CODE_MASK 0x1
|
|
|
|
/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
|
|
#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
|
|
#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
|
|
#define INT_AGGR_COUNTER_AND_TIMER_RESET 0x10000
|
|
#define INT_AGGR_STATUS_BIT 0x100000
|
|
#define INT_AGGR_PARAM_WRITE 0x1000000
|
|
#define INT_AGGR_ENABLE 0x80000000
|
|
|
|
/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
|
|
#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1
|
|
|
|
/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
|
|
#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1
|
|
|
|
/* REG_UFS_MEM_CFG - Global Config Registers 300h */
|
|
#define MCQ_MODE_SELECT BIT(0)
|
|
|
|
/* CQISy - CQ y Interrupt Status Register */
|
|
#define UFSHCD_MCQ_CQIS_TAIL_ENT_PUSH_STS 0x1
|
|
|
|
/* UICCMD - UIC Command */
|
|
#define COMMAND_OPCODE_MASK 0xFF
|
|
#define GEN_SELECTOR_INDEX_MASK 0xFFFF
|
|
|
|
#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
|
|
#define RESET_LEVEL 0xFF
|
|
|
|
#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
|
|
#define CONFIG_RESULT_CODE_MASK 0xFF
|
|
#define GENERIC_ERROR_CODE_MASK 0xFF
|
|
|
|
/* GenSelectorIndex calculation macros for M-PHY attributes */
|
|
#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
|
|
#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
|
|
|
|
#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
|
|
((sel) & 0xFFFF))
|
|
#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
|
|
#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
|
|
#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
|
|
|
|
/* Link Status*/
|
|
enum link_status {
|
|
UFSHCD_LINK_IS_DOWN = 1,
|
|
UFSHCD_LINK_IS_UP = 2,
|
|
};
|
|
|
|
/* UIC Commands */
|
|
enum uic_cmd_dme {
|
|
UIC_CMD_DME_GET = 0x01,
|
|
UIC_CMD_DME_SET = 0x02,
|
|
UIC_CMD_DME_PEER_GET = 0x03,
|
|
UIC_CMD_DME_PEER_SET = 0x04,
|
|
UIC_CMD_DME_POWERON = 0x10,
|
|
UIC_CMD_DME_POWEROFF = 0x11,
|
|
UIC_CMD_DME_ENABLE = 0x12,
|
|
UIC_CMD_DME_RESET = 0x14,
|
|
UIC_CMD_DME_END_PT_RST = 0x15,
|
|
UIC_CMD_DME_LINK_STARTUP = 0x16,
|
|
UIC_CMD_DME_HIBER_ENTER = 0x17,
|
|
UIC_CMD_DME_HIBER_EXIT = 0x18,
|
|
UIC_CMD_DME_TEST_MODE = 0x1A,
|
|
};
|
|
|
|
/* UIC Config result code / Generic error code */
|
|
enum {
|
|
UIC_CMD_RESULT_SUCCESS = 0x00,
|
|
UIC_CMD_RESULT_INVALID_ATTR = 0x01,
|
|
UIC_CMD_RESULT_FAILURE = 0x01,
|
|
UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
|
|
UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
|
|
UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
|
|
UIC_CMD_RESULT_BAD_INDEX = 0x05,
|
|
UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
|
|
UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
|
|
UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
|
|
UIC_CMD_RESULT_BUSY = 0x09,
|
|
UIC_CMD_RESULT_DME_FAILURE = 0x0A,
|
|
};
|
|
|
|
#define MASK_UIC_COMMAND_RESULT 0xFF
|
|
|
|
#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8)
|
|
#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0)
|
|
|
|
/* Interrupt disable masks */
|
|
enum {
|
|
/* Interrupt disable mask for UFSHCI v1.1 */
|
|
INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
|
|
|
|
/* Interrupt disable mask for UFSHCI v2.1 */
|
|
INTERRUPT_MASK_ALL_VER_21 = 0x71FFF,
|
|
};
|
|
|
|
/* CCAP - Crypto Capability 100h */
|
|
union ufs_crypto_capabilities {
|
|
__le32 reg_val;
|
|
struct {
|
|
u8 num_crypto_cap;
|
|
u8 config_count;
|
|
u8 reserved;
|
|
u8 config_array_ptr;
|
|
};
|
|
};
|
|
|
|
enum ufs_crypto_key_size {
|
|
UFS_CRYPTO_KEY_SIZE_INVALID = 0x0,
|
|
UFS_CRYPTO_KEY_SIZE_128 = 0x1,
|
|
UFS_CRYPTO_KEY_SIZE_192 = 0x2,
|
|
UFS_CRYPTO_KEY_SIZE_256 = 0x3,
|
|
UFS_CRYPTO_KEY_SIZE_512 = 0x4,
|
|
};
|
|
|
|
enum ufs_crypto_alg {
|
|
UFS_CRYPTO_ALG_AES_XTS = 0x0,
|
|
UFS_CRYPTO_ALG_BITLOCKER_AES_CBC = 0x1,
|
|
UFS_CRYPTO_ALG_AES_ECB = 0x2,
|
|
UFS_CRYPTO_ALG_ESSIV_AES_CBC = 0x3,
|
|
};
|
|
|
|
/* x-CRYPTOCAP - Crypto Capability X */
|
|
union ufs_crypto_cap_entry {
|
|
__le32 reg_val;
|
|
struct {
|
|
u8 algorithm_id;
|
|
u8 sdus_mask; /* Supported data unit size mask */
|
|
u8 key_size;
|
|
u8 reserved;
|
|
};
|
|
};
|
|
|
|
#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
|
|
#define UFS_CRYPTO_KEY_MAX_SIZE 64
|
|
/* x-CRYPTOCFG - Crypto Configuration X */
|
|
union ufs_crypto_cfg_entry {
|
|
__le32 reg_val[32];
|
|
struct {
|
|
u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
|
|
u8 data_unit_size;
|
|
u8 crypto_cap_idx;
|
|
u8 reserved_1;
|
|
u8 config_enable;
|
|
u8 reserved_multi_host;
|
|
u8 reserved_2;
|
|
u8 vsb[2];
|
|
u8 reserved_3[56];
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Request Descriptor Definitions
|
|
*/
|
|
|
|
/* To accommodate UFS2.0 required Command type */
|
|
enum {
|
|
UTP_CMD_TYPE_UFS_STORAGE = 0x1,
|
|
};
|
|
|
|
enum {
|
|
UTP_SCSI_COMMAND = 0x00000000,
|
|
UTP_NATIVE_UFS_COMMAND = 0x10000000,
|
|
UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
|
|
};
|
|
|
|
/* UTP Transfer Request Data Direction (DD) */
|
|
enum utp_data_direction {
|
|
UTP_NO_DATA_TRANSFER = 0,
|
|
UTP_HOST_TO_DEVICE = 1,
|
|
UTP_DEVICE_TO_HOST = 2,
|
|
};
|
|
|
|
/* Overall command status values */
|
|
enum utp_ocs {
|
|
OCS_SUCCESS = 0x0,
|
|
OCS_INVALID_CMD_TABLE_ATTR = 0x1,
|
|
OCS_INVALID_PRDT_ATTR = 0x2,
|
|
OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
|
|
OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
|
|
OCS_PEER_COMM_FAILURE = 0x5,
|
|
OCS_ABORTED = 0x6,
|
|
OCS_FATAL_ERROR = 0x7,
|
|
OCS_DEVICE_FATAL_ERROR = 0x8,
|
|
OCS_INVALID_CRYPTO_CONFIG = 0x9,
|
|
OCS_GENERAL_CRYPTO_ERROR = 0xA,
|
|
OCS_INVALID_COMMAND_STATUS = 0x0F,
|
|
};
|
|
|
|
enum {
|
|
MASK_OCS = 0x0F,
|
|
};
|
|
|
|
/* The maximum length of the data byte count field in the PRDT is 256KB */
|
|
#define PRDT_DATA_BYTE_COUNT_MAX SZ_256K
|
|
/* The granularity of the data byte count field in the PRDT is 32-bit */
|
|
#define PRDT_DATA_BYTE_COUNT_PAD 4
|
|
|
|
/**
|
|
* struct ufshcd_sg_entry - UFSHCI PRD Entry
|
|
* @addr: Physical address; DW-0 and DW-1.
|
|
* @reserved: Reserved for future use DW-2
|
|
* @size: size of physical segment DW-3
|
|
*/
|
|
struct ufshcd_sg_entry {
|
|
__le64 addr;
|
|
__le32 reserved;
|
|
__le32 size;
|
|
/*
|
|
* followed by variant-specific fields if
|
|
* CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE has been defined.
|
|
*/
|
|
};
|
|
|
|
/**
|
|
* struct utp_transfer_cmd_desc - UTP Command Descriptor (UCD)
|
|
* @command_upiu: Command UPIU Frame address
|
|
* @response_upiu: Response UPIU Frame address
|
|
* @prd_table: Physical Region Descriptor: an array of SG_ALL struct
|
|
* ufshcd_sg_entry's. Variant-specific fields may be present after each.
|
|
*/
|
|
struct utp_transfer_cmd_desc {
|
|
u8 command_upiu[ALIGNED_UPIU_SIZE];
|
|
u8 response_upiu[ALIGNED_UPIU_SIZE];
|
|
u8 prd_table[];
|
|
};
|
|
|
|
/**
|
|
* struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
|
|
*/
|
|
struct request_desc_header {
|
|
u8 cci;
|
|
u8 ehs_length;
|
|
#if defined(__BIG_ENDIAN)
|
|
u8 enable_crypto:1;
|
|
u8 reserved2:7;
|
|
|
|
u8 command_type:4;
|
|
u8 reserved1:1;
|
|
u8 data_direction:2;
|
|
u8 interrupt:1;
|
|
#elif defined(__LITTLE_ENDIAN)
|
|
u8 reserved2:7;
|
|
u8 enable_crypto:1;
|
|
|
|
u8 interrupt:1;
|
|
u8 data_direction:2;
|
|
u8 reserved1:1;
|
|
u8 command_type:4;
|
|
#else
|
|
#error
|
|
#endif
|
|
|
|
__le32 dunl;
|
|
u8 ocs;
|
|
u8 cds;
|
|
__le16 ldbc;
|
|
__le32 dunu;
|
|
};
|
|
|
|
static_assert(sizeof(struct request_desc_header) == 16);
|
|
|
|
/**
|
|
* struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
|
|
* @header: UTRD header DW-0 to DW-3
|
|
* @command_desc_base_addr: UCD base address DW 4-5
|
|
* @response_upiu_length: response UPIU length DW-6
|
|
* @response_upiu_offset: response UPIU offset DW-6
|
|
* @prd_table_length: Physical region descriptor length DW-7
|
|
* @prd_table_offset: Physical region descriptor offset DW-7
|
|
*/
|
|
struct utp_transfer_req_desc {
|
|
|
|
/* DW 0-3 */
|
|
struct request_desc_header header;
|
|
|
|
/* DW 4-5*/
|
|
__le64 command_desc_base_addr;
|
|
|
|
/* DW 6 */
|
|
__le16 response_upiu_length;
|
|
__le16 response_upiu_offset;
|
|
|
|
/* DW 7 */
|
|
__le16 prd_table_length;
|
|
__le16 prd_table_offset;
|
|
};
|
|
|
|
/* MCQ Completion Queue Entry */
|
|
struct cq_entry {
|
|
/* DW 0-1 */
|
|
__le64 command_desc_base_addr;
|
|
|
|
/* DW 2 */
|
|
__le16 response_upiu_length;
|
|
__le16 response_upiu_offset;
|
|
|
|
/* DW 3 */
|
|
__le16 prd_table_length;
|
|
__le16 prd_table_offset;
|
|
|
|
/* DW 4 */
|
|
__le32 status;
|
|
|
|
/* DW 5-7 */
|
|
__le32 reserved[3];
|
|
};
|
|
|
|
static_assert(sizeof(struct cq_entry) == 32);
|
|
|
|
/*
|
|
* UTMRD structure.
|
|
*/
|
|
struct utp_task_req_desc {
|
|
/* DW 0-3 */
|
|
struct request_desc_header header;
|
|
|
|
/* DW 4-11 - Task request UPIU structure */
|
|
struct {
|
|
struct utp_upiu_header req_header;
|
|
__be32 input_param1;
|
|
__be32 input_param2;
|
|
__be32 input_param3;
|
|
__be32 __reserved1[2];
|
|
} upiu_req;
|
|
|
|
/* DW 12-19 - Task Management Response UPIU structure */
|
|
struct {
|
|
struct utp_upiu_header rsp_header;
|
|
__be32 output_param1;
|
|
__be32 output_param2;
|
|
__be32 __reserved2[3];
|
|
} upiu_rsp;
|
|
};
|
|
|
|
#endif /* End of Header */
|