Heikki Krogerus 4c97ad993d dmaengine: hsu: remove platform data ... There are no platforms where it's not possible to calculate the number of channels based on IO space length, and since that is the only purpose for struct hsu_dma_platform_data, removing it. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2015-10-17 21:22:08 -07:00
..
ad5449.h
ad5755.h
ad7266.h
ad7291.h	staging:iio:ad7291: Move out of staging	2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7887.h
adau17x1.h	ASoC: Add ADAU1381/ADAU1781 audio CODEC support	2014-05-27 20:54:51 +01:00
adau1977.h
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h	ASoC: Samsung: Add quirk for internal DMA	2014-11-07 10:38:17 +00:00
asoc-s3c24xx_simtec.h
asoc-ti-mcbsp.h
asoc-ux500-msp.h
at24.h
at91_adc.h	iio: adc: at91_adc: Add support for touchscreens without TSMR	2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h	ata: pata_samsung_cf: removes s5pc100 related ata codes	2014-06-30 10:48:08 -04:00
atmel.h	tty/serial: at91: move ATMEL_MAX_UART	2015-10-04 17:47:49 +01:00
atmel_mxt_ts.h	Input: atmel_mxt_ts - use deep sleep mode when stopped	2015-08-04 17:03:52 -07:00
bcmgenet.h	net: bcmgenet: enable driver to work without a device tree	2014-12-08 20:26:59 -05:00
bd6107.h
bfin_rotary.h	Input: bfin_rotary - move pin lists into into platform data	2015-02-15 16:06:27 -08:00
brcmfmac-sdio.h
bt-nokia-h4p.h
camera-mx2.h
camera-mx3.h
camera-pxa.h
camera-rcar.h
clk-integrator.h
clk-lpss.h
clk-realview.h
clk-u300.h
clk-ux500.h	clk/ARM: move Ux500 PRCC bases to the device tree	2015-08-24 16:49:14 -07:00
coda.h
cpuidle-exynos.h	cpuidle: exynos: add coupled cpuidle support for exynos4210	2015-01-30 08:39:15 +09:00
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci_asp.h
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-dw.h	dmaengine: dw: define DW_DMA_MAX_NR_MASTERS	2015-02-04 22:39:44 -08:00
dma-ep93xx.h
dma-hsu.h	dmaengine: hsu: remove platform data	2015-10-17 21:22:08 -07:00
dma-imx-sdma.h	dmaengine: imx-sdma: Add support for version 3 firmware	2015-03-18 13:53:33 +05:30
dma-imx.h	dmaengine: imx-sdma: Add a new DMATYPE for SAI	2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h	dma: mmp_tdma: Fix build for ARM64	2015-02-03 17:47:35 -08:00
dma-mv_xor.h
dma-rcar-hpbdma.h
dma-s3c24xx.h
dma-ste-dma40.h
dmtimer-omap.h
drv260x-pdata.h	Input: drv260x - add TI drv260x haptics driver	2014-08-19 22:19:28 -07:00
dwc3-omap.h
edma.h	ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue	2014-07-28 17:03:13 +05:30
efm32-spi.h
efm32-uart.h
ehci-sh.h
elm.h	nand: omap2: Remove horrible ifdefs to fix module probe	2014-09-22 11:37:51 -07:00
emif_plat.h
eth-netx.h
fsa9480.h
g762.h
gpio-ath79.h	MIPS: ath79: Add OF support to the GPIO driver	2015-06-21 21:54:09 +02:00
gpio-davinci.h
gpio-dwapb.h	GPIO: gpio-dwapb: Enable platform driver binding to MFD driver	2014-09-23 17:51:37 +02:00
gpio-lpc32xx.h
gpio-omap.h	gpio: omap: Allow building as a loadable module	2015-05-06 15:23:03 +02:00
gpio-rcar.h
gpio-ts5500.h
gpio_backlight.h
hsmmc-omap.h	ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin	2015-03-27 12:19:37 +01:00
hwmon-s3c.h
i2c-cbus-gpio.h
i2c-davinci.h	i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery	2015-04-10 17:57:28 +02:00
i2c-designware.h	i2c: designware: add support of platform data to set I2C mode	2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-mux-reg.h	i2c: mux: Add register-based mux i2c-mux-reg	2015-08-24 14:05:18 +02:00
i2c-nuc900.h
i2c-s3c2410.h
ina2xx.h
intel-mid_wdt.h	watchdog: add Intel MID watchdog driver support	2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h	iommu/omap: Remove platform data da_start and da_end fields	2014-07-29 12:39:56 +02:00
irda-pxaficp.h
irda-sa11x0.h	arm: sa1100: move irda header to linux/platform_data	2014-12-30 18:44:07 -05:00
irq-renesas-intc-irqpin.h
isl9305.h	regulator: isl9305: Add Intersil ISL9305/H driver	2014-09-06 12:43:05 +01:00
itco_wdt.h	mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data	2015-08-11 15:03:21 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h	Input: update email-id of Rajeev Kumar	2015-05-22 10:59:55 -07:00
keypad-ep93xx.h
keypad-nomadik-ske.h
keypad-omap.h
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h
leds-kirkwood-ns2.h	leds: leds-ns2: move LED modes mapping outside of the driver	2015-08-28 14:06:06 +02:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h
leds-omap.h
leds-pca963x.h
leds-s3c24xx.h
lm3630a_bl.h
lm3639_bl.h
lp855x.h	backlight: lp855x: Use private data for regulator control	2015-08-25 08:40:44 +01:00
lp8727.h
lp8755.h
lv5207lp.h
macb.h	net/macb: convert to kernel doc	2015-07-27 01:10:29 -07:00
mailbox-omap.h
max197.h
max3421-hcd.h	usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity	2014-05-29 11:19:30 -07:00
max6697.h
mfd-mcp-sa11x0.h
microread.h
mmc-atmel-mci.h	mmc: atmel-mci: move mach header to platform_data	2014-11-10 12:40:37 +01:00
mmc-davinci.h
mmc-esdhc-imx.h	mmc: sdhci-esdhc-imx: add tuning-step setting support	2015-08-27 14:50:50 +02:00
mmc-mvsdio.h
mmc-mxcmmc.h
mmc-omap.h	mmc: omap_hsmmc: remove prepare/complete system suspend support.	2015-01-19 09:56:08 +01:00
mmc-pxamci.h
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
mtd-davinci-aemif.h
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h	nand: omap2: Add support for flash-based bad block table	2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h	mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding	2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h
mtd-onenand-omap2.h
mtd-orion_nand.h
mv_usb.h
net-cw1200.h
nfcmrvl.h	NFC: nfcmrvl: add UART driver	2015-06-11 23:41:57 +02:00
ntc_thermistor.h	hwmon: (ntc_thermistor) Add support for ncpXXwf104	2015-05-31 22:58:36 -07:00
nxp-nci.h	NFC: nxp-nci: Add support for NXP NCI chips	2015-03-26 11:07:50 +01:00
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h
pinctrl-single.h
pixcir_i2c_ts.h	Input: pixcir_i2c_ts - switch the device over to gpiod	2015-07-11 17:28:08 -07:00
pn544.h
pxa2xx_udc.h
pxa_sdhci.h	mmc: sdhci-pxav3: Move private driver data to driver source	2014-11-10 12:40:31 +01:00
regulator-haptic.h	Input: add regulator haptic driver	2014-12-21 18:59:20 -08:00
remoteproc-omap.h
s3c-hsotg.h
s3c-hsudc.h
sa11x0-serial.h
sc18is602.h
serial-imx.h	serial: imx: drop support for IRDA	2015-03-07 03:26:32 +01:00
serial-omap.h	ARM: OMAP: serial: remove last vestige of DTR_gpio support.	2014-11-10 09:06:44 -08:00
serial-sccnxp.h
sh_ipmmu.h
shmob_drm.h
sht15.h
shtc1.h	hwmon: add support for Sensirion SHTC1 sensor	2014-06-12 08:36:48 -07:00
si5351.h	clk: si5351: Do not pass struct clk in platform_data	2015-05-08 11:22:30 -07:00
simplefb.h
sky81452-backlight.h	backlight: Add support Skyworks SKY81452 backlight driver	2015-03-12 09:08:19 +00:00
spi-clps711x.h
spi-davinci.h	spi: davinci: Choose correct pre-scaler limit based on SOC	2015-07-24 17:35:51 +01:00
spi-ep93xx.h
spi-imx.h
spi-mt65xx.h	spi: mediatek: fix spi incorrect endian usage	2015-08-20 11:09:47 -07:00
spi-nuc900.h
spi-omap2-mcspi.h
spi-s3c64xx.h
ssm2518.h
st-nci.h	nfc: st-nci: Rename st21nfcb to st-nci	2015-06-10 12:51:44 +02:00
st21nfca.h	NFC: st21nfca: Adding support for secure element	2015-01-28 00:03:36 +01:00
st33zp24.h	tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)	2015-03-18 22:43:06 +01:00
st1232_pdata.h
st_sensors_pdata.h
syscon.h	mfd: syscon: Add platform data with a regmap config name	2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h	ARM: imx: move EHCI platform defines out of platform_data header	2014-07-18 16:10:04 +08:00
usb-ehci-orion.h
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h
usb-pxa3xx-ulpi.h
usb-rcar-phy.h
usb-s3c2410_udc.h
usb3503.h
ux500_wdt.h
video-clcd-versatile.h	video: fix up versatile CLCD helper move	2014-07-23 17:41:00 +02:00
video-ep93xx.h	ARM/fb: ep93xx: switch framebuffer to use modedb only	2015-08-13 12:25:44 +02:00
video-imxfb.h
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h
video_s3c.h
voltage-omap.h
wiznet.h
wkup_m3.h	remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3	2015-06-17 09:58:08 +03:00
zforce_ts.h	Input: zforce_ts - convert to use the gpiod interface	2015-07-08 21:50:57 -07:00