mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 00:48:50 +00:00
781f9f3031
Add LS1028A qDMA controller bindings to fsl-qdma bindings. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
58 lines
2 KiB
Text
58 lines
2 KiB
Text
NXP Layerscape SoC qDMA Controller
|
|
==================================
|
|
|
|
This device follows the generic DMA bindings defined in dma/dma.txt.
|
|
|
|
Required properties:
|
|
|
|
- compatible: Must be one of
|
|
"fsl,ls1021a-qdma": for LS1021A Board
|
|
"fsl,ls1028a-qdma": for LS1028A Board
|
|
"fsl,ls1043a-qdma": for ls1043A Board
|
|
"fsl,ls1046a-qdma": for ls1046A Board
|
|
- reg: Should contain the register's base address and length.
|
|
- interrupts: Should contain a reference to the interrupt used by this
|
|
device.
|
|
- interrupt-names: Should contain interrupt names:
|
|
"qdma-queue0": the block0 interrupt
|
|
"qdma-queue1": the block1 interrupt
|
|
"qdma-queue2": the block2 interrupt
|
|
"qdma-queue3": the block3 interrupt
|
|
"qdma-error": the error interrupt
|
|
- fsl,dma-queues: Should contain number of queues supported.
|
|
- dma-channels: Number of DMA channels supported
|
|
- block-number: the virtual block number
|
|
- block-offset: the offset of different virtual block
|
|
- status-sizes: status queue size of per virtual block
|
|
- queue-sizes: command queue size of per virtual block, the size number
|
|
based on queues
|
|
|
|
Optional properties:
|
|
|
|
- dma-channels: Number of DMA channels supported by the controller.
|
|
- big-endian: If present registers and hardware scatter/gather descriptors
|
|
of the qDMA are implemented in big endian mode, otherwise in little
|
|
mode.
|
|
|
|
Examples:
|
|
|
|
qdma: dma-controller@8390000 {
|
|
compatible = "fsl,ls1021a-qdma";
|
|
reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
|
|
<0x0 0x8389000 0x0 0x1000>, /* Status regs */
|
|
<0x0 0x838a000 0x0 0x2000>; /* Block regs */
|
|
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "qdma-error",
|
|
"qdma-queue0", "qdma-queue1";
|
|
dma-channels = <8>;
|
|
block-number = <2>;
|
|
block-offset = <0x1000>;
|
|
fsl,dma-queues = <2>;
|
|
status-sizes = <64>;
|
|
queue-sizes = <64 64>;
|
|
big-endian;
|
|
};
|
|
|
|
DMA clients must use the format described in dma/dma.txt file.
|