mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 00:48:50 +00:00
48c926cd34
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
93 lines
3.9 KiB
Text
93 lines
3.9 KiB
Text
* Freescale IOMUX Controller (IOMUXC) for i.MX
|
|
|
|
The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC
|
|
to share one PAD to several functional blocks. The sharing is done by
|
|
multiplexing the PAD input/output signals. For each PAD there are up to
|
|
8 muxing options (called ALT modes). Since different modules require
|
|
different PAD settings (like pull up, keeper, etc) the IOMUXC controls
|
|
also the PAD settings parameters.
|
|
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the
|
|
common pinctrl bindings used by client devices, including the meaning of the
|
|
phrase "pin configuration node".
|
|
|
|
Freescale IMX pin configuration node is a node of a group of pins which can be
|
|
used for a specific device or function. This node represents both mux and config
|
|
of the pins in that group. The 'mux' selects the function mode(also named mux
|
|
mode) this pin can work on and the 'config' configures various pad settings
|
|
such as pull-up, open drain, drive strength, etc.
|
|
|
|
Required properties for iomux controller:
|
|
- compatible: "fsl,<soc>-iomuxc"
|
|
Please refer to each fsl,<soc>-pinctrl.txt binding doc for supported SoCs.
|
|
|
|
Required properties for pin configuration node:
|
|
- fsl,pins: each entry consists of 6 integers and represents the mux and config
|
|
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
|
|
input_val> are specified using a PIN_FUNC_ID macro, which can be found in
|
|
imx*-pinfunc.h under device tree source folder. The last integer CONFIG is
|
|
the pad setting value like pull-up on this pin. And that's why fsl,pins entry
|
|
looks like <PIN_FUNC_ID CONFIG> in the example below.
|
|
|
|
Bits used for CONFIG:
|
|
NO_PAD_CTL(1 << 31): indicate this pin does not need config.
|
|
|
|
SION(1 << 30): Software Input On Field.
|
|
Force the selected mux mode input path no matter of MUX_MODE functionality.
|
|
By default the input path is determined by functionality of the selected
|
|
mux mode (regular).
|
|
|
|
Other bits are used for PAD setting.
|
|
Please refer to each fsl,<soc>-pinctrl,txt binding doc for SoC specific part
|
|
of bits definitions.
|
|
|
|
NOTE:
|
|
Some requirements for using fsl,imx-pinctrl binding:
|
|
1. We have pin function node defined under iomux controller node to represent
|
|
what pinmux functions this SoC supports.
|
|
2. The pin configuration node intends to work on a specific function should
|
|
to be defined under that specific function node.
|
|
The function node's name should represent well about what function
|
|
this group of pins in this pin configuration node are working on.
|
|
3. The driver can use the function node's name and pin configuration node's
|
|
name describe the pin function and group hierarchy.
|
|
For example, Linux IMX pinctrl driver takes the function node's name
|
|
as the function name and pin configuration node's name as group name to
|
|
create the map table.
|
|
4. Each pin configuration node should have a phandle, devices can set pins
|
|
configurations by referring to the phandle of that pin configuration node.
|
|
|
|
Examples:
|
|
usdhc@219c000 { /* uSDHC4 */
|
|
non-removable;
|
|
vmmc-supply = <®_3p3v>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4_1>;
|
|
};
|
|
|
|
iomuxc@20e0000 {
|
|
compatible = "fsl,imx6q-iomuxc";
|
|
reg = <0x020e0000 0x4000>;
|
|
|
|
/* shared pinctrl settings */
|
|
usdhc4 {
|
|
pinctrl_usdhc4_1: usdhc4grp-1 {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
|
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
|
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
|
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
|
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
|
>;
|
|
};
|
|
....
|
|
};
|
|
Refer to the IOMUXC controller chapter in imx6q datasheet,
|
|
0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed,
|
|
80Ohm driver strength and Fast Slew Rate.
|
|
User should refer to each SoC spec to set the correct value.
|