mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 00:48:50 +00:00
c09acbc499
Also fix some examples to avoid warnings like: brcm,ns-pinmux.example.dt.yaml: pin-controller@1800c1c0: $nodename:0: 'pin-controller@1800c1c0' does not match '^pinctrl|pinmux@[0-9a-f]+$' Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211202063216.24439-1-zajec5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
150 lines
4.3 KiB
YAML
150 lines
4.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. SM8250 TLMM block
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
|
|
description: |
|
|
This binding describes the Top Level Mode Multiplexer block found in the
|
|
SM8250 platform.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,sm8250-pinctrl
|
|
|
|
reg:
|
|
minItems: 3
|
|
maxItems: 3
|
|
|
|
reg-names:
|
|
items:
|
|
- const: "west"
|
|
- const: "south"
|
|
- const: "north"
|
|
|
|
interrupts:
|
|
description: Specifies the TLMM summary IRQ
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
description:
|
|
Specifies the PIN numbers and Flags, as defined in defined in
|
|
include/dt-bindings/interrupt-controller/irq.h
|
|
const: 2
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
description: Specifying the pin number and flags, as defined in
|
|
include/dt-bindings/gpio/gpio.h
|
|
const: 2
|
|
|
|
gpio-ranges:
|
|
maxItems: 1
|
|
|
|
wakeup-parent:
|
|
maxItems: 1
|
|
|
|
#PIN CONFIGURATION NODES
|
|
patternProperties:
|
|
'^.*$':
|
|
if:
|
|
type: object
|
|
then:
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
oneOf:
|
|
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
|
|
- enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
|
|
cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
|
|
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
|
|
ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
|
|
ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
|
|
mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
|
|
mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
|
|
mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
|
|
pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
|
|
pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
|
|
qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
|
|
qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
|
|
qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
|
|
sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
|
|
tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
|
|
tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
|
|
tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
|
|
|
|
drive-strength:
|
|
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
|
default: 2
|
|
description:
|
|
Selects the drive strength for the specified pins, in mA.
|
|
|
|
bias-pull-down: true
|
|
|
|
bias-pull-up: true
|
|
|
|
bias-disable: true
|
|
|
|
output-high: true
|
|
|
|
output-low: true
|
|
|
|
required:
|
|
- pins
|
|
- function
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: "pinctrl.yaml#"
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
- gpio-ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
pinctrl@1f00000 {
|
|
compatible = "qcom,sm8250-pinctrl";
|
|
reg = <0x0f100000 0x300000>,
|
|
<0x0f500000 0x300000>,
|
|
<0x0f900000 0x300000>;
|
|
reg-names = "west", "south", "north";
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-ranges = <&tlmm 0 0 180>;
|
|
wakeup-parent = <&pdc>;
|
|
};
|