mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-11-01 17:08:10 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/iio/adc/npcm_adc.c
Alexandru Ardelean d3be83244c iio: remove explicit IIO device parent assignment 
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
   I = devm_iio_device_alloc(P, SP);
   ...
-  I->dev.parent = P;

It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'

But this is is only done in case where the block is left empty.

The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.

However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14 11:49:59 +01:00

319 lines
7.9 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2019 Nuvoton Technology corporation.
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/mfd/syscon.h>
#include <linux/io.h>
#include <linux/iio/iio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/reset.h>
struct npcm_adc {
bool int_status;
u32 adc_sample_hz;
struct device *dev;
void __iomem *regs;
struct clk *adc_clk;
wait_queue_head_t wq;
struct regulator *vref;
struct reset_control *reset;
};
/* ADC registers */
#define NPCM_ADCCON 0x00
#define NPCM_ADCDATA 0x04
/* ADCCON Register Bits */
#define NPCM_ADCCON_ADC_INT_EN BIT(21)
#define NPCM_ADCCON_REFSEL BIT(19)
#define NPCM_ADCCON_ADC_INT_ST BIT(18)
#define NPCM_ADCCON_ADC_EN BIT(17)
#define NPCM_ADCCON_ADC_RST BIT(16)
#define NPCM_ADCCON_ADC_CONV BIT(13)
#define NPCM_ADCCON_CH_MASK GENMASK(27, 24)
#define NPCM_ADCCON_CH(x) ((x) << 24)
#define NPCM_ADCCON_DIV_SHIFT 1
#define NPCM_ADCCON_DIV_MASK GENMASK(8, 1)
#define NPCM_ADC_DATA_MASK(x) ((x) & GENMASK(9, 0))
#define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
/* ADC General Definition */
#define NPCM_RESOLUTION_BITS 10
#define NPCM_INT_VREF_MV 2000
#define NPCM_ADC_CHAN(ch) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.channel = ch, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
}
static const struct iio_chan_spec npcm_adc_iio_channels[] = {
NPCM_ADC_CHAN(0),
NPCM_ADC_CHAN(1),
NPCM_ADC_CHAN(2),
NPCM_ADC_CHAN(3),
NPCM_ADC_CHAN(4),
NPCM_ADC_CHAN(5),
NPCM_ADC_CHAN(6),
NPCM_ADC_CHAN(7),
};
static irqreturn_t npcm_adc_isr(int irq, void *data)
{
u32 regtemp;
struct iio_dev *indio_dev = data;
struct npcm_adc *info = iio_priv(indio_dev);
regtemp = ioread32(info->regs + NPCM_ADCCON);
if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
iowrite32(regtemp, info->regs + NPCM_ADCCON);
wake_up_interruptible(&info->wq);
info->int_status = true;
}
return IRQ_HANDLED;
}
static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
{
int ret;
u32 regtemp;
/* Select ADC channel */
regtemp = ioread32(info->regs + NPCM_ADCCON);
regtemp &= ~NPCM_ADCCON_CH_MASK;
info->int_status = false;
iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
ret = wait_event_interruptible_timeout(info->wq, info->int_status,
msecs_to_jiffies(10));
if (ret == 0) {
regtemp = ioread32(info->regs + NPCM_ADCCON);
if (regtemp & NPCM_ADCCON_ADC_CONV) {
/* if conversion failed - reset ADC module */
reset_control_assert(info->reset);
msleep(100);
reset_control_deassert(info->reset);
msleep(100);
/* Enable ADC and start conversion module */
iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV,
info->regs + NPCM_ADCCON);
dev_err(info->dev, "RESET ADC Complete\n");
}
return -ETIMEDOUT;
}
if (ret < 0)
return ret;
*val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
return 0;
}
static int npcm_adc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val,
int *val2, long mask)
{
int ret;
int vref_uv;
struct npcm_adc *info = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&indio_dev->mlock);
ret = npcm_adc_read(info, val, chan->channel);
mutex_unlock(&indio_dev->mlock);
if (ret) {
dev_err(info->dev, "NPCM ADC read failed\n");
return ret;
}
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
if (!IS_ERR(info->vref)) {
vref_uv = regulator_get_voltage(info->vref);
*val = vref_uv / 1000;
} else {
*val = NPCM_INT_VREF_MV;
}
*val2 = NPCM_RESOLUTION_BITS;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = info->adc_sample_hz;
return IIO_VAL_INT;
default:
return -EINVAL;
}
return 0;
}
static const struct iio_info npcm_adc_iio_info = {
.read_raw = &npcm_adc_read_raw,
};
static const struct of_device_id npcm_adc_match[] = {
{ .compatible = "nuvoton,npcm750-adc", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, npcm_adc_match);
static int npcm_adc_probe(struct platform_device *pdev)
{
int ret;
int irq;
u32 div;
u32 reg_con;
struct npcm_adc *info;
struct iio_dev *indio_dev;
struct device *dev = &pdev->dev;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
if (!indio_dev)
return -ENOMEM;
info = iio_priv(indio_dev);
info->dev = &pdev->dev;
info->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
info->reset = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(info->reset))
return PTR_ERR(info->reset);
info->adc_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(info->adc_clk)) {
dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
return PTR_ERR(info->adc_clk);
}
/* calculate ADC clock sample rate */
reg_con = ioread32(info->regs + NPCM_ADCCON);
div = reg_con & NPCM_ADCCON_DIV_MASK;
div = div >> NPCM_ADCCON_DIV_SHIFT;
info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
ret = -EINVAL;
goto err_disable_clk;
}
ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
"NPCM_ADC", indio_dev);
if (ret < 0) {
dev_err(dev, "failed requesting interrupt\n");
goto err_disable_clk;
}
reg_con = ioread32(info->regs + NPCM_ADCCON);
info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
if (!IS_ERR(info->vref)) {
ret = regulator_enable(info->vref);
if (ret) {
dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
goto err_disable_clk;
}
iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
info->regs + NPCM_ADCCON);
} else {
/*
* Any error which is not ENODEV indicates the regulator
* has been specified and so is a failure case.
*/
if (PTR_ERR(info->vref) != -ENODEV) {
ret = PTR_ERR(info->vref);
goto err_disable_clk;
}
/* Use internal reference */
iowrite32(reg_con | NPCM_ADCCON_REFSEL,
info->regs + NPCM_ADCCON);
}
init_waitqueue_head(&info->wq);
reg_con = ioread32(info->regs + NPCM_ADCCON);
reg_con |= NPCM_ADC_ENABLE;
/* Enable the ADC Module */
iowrite32(reg_con, info->regs + NPCM_ADCCON);
/* Start ADC conversion */
iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
platform_set_drvdata(pdev, indio_dev);
indio_dev->name = dev_name(&pdev->dev);
indio_dev->info = &npcm_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = npcm_adc_iio_channels;
indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&pdev->dev, "Couldn't register the device.\n");
goto err_iio_register;
}
pr_info("NPCM ADC driver probed\n");
return 0;
err_iio_register:
iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
if (!IS_ERR(info->vref))
regulator_disable(info->vref);
err_disable_clk:
clk_disable_unprepare(info->adc_clk);
return ret;
}
static int npcm_adc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct npcm_adc *info = iio_priv(indio_dev);
u32 regtemp;
iio_device_unregister(indio_dev);
regtemp = ioread32(info->regs + NPCM_ADCCON);
iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
if (!IS_ERR(info->vref))
regulator_disable(info->vref);
clk_disable_unprepare(info->adc_clk);
return 0;
}
static struct platform_driver npcm_adc_driver = {
.probe = npcm_adc_probe,
.remove = npcm_adc_remove,
.driver = {
.name = "npcm_adc",
.of_match_table = npcm_adc_match,
},
};
module_platform_driver(npcm_adc_driver);
MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
MODULE_LICENSE("GPL v2");
Reference in a new issue View git blame Copy permalink