mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-28 21:33:52 +00:00
b8e65c1939
We should set up the partitions in the right way so we will find out
what is in the flash.
The ARM Firmware Suite now has its own compatible and proper device
tree bindings to trigger discovery of the flash contents, and Linux
supports handling the new type of AFS partitions.
Based on commit 7f8e78ca90 ("arm64: dts: juno: set the right partition
type for NOR flash")
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
440 lines
11 KiB
Text
440 lines
11 KiB
Text
/*
|
|
* ARM Ltd. Versatile Express
|
|
*
|
|
* Motherboard Express uATX
|
|
* V2M-P1
|
|
*
|
|
* HBI-0190D
|
|
*
|
|
* RS1 memory map ("ARM Cortex-A Series memory map" in the board's
|
|
* Technical Reference Manual)
|
|
*
|
|
* WARNING! The hardware described in this file is independent from the
|
|
* original variant (vexpress-v2m.dtsi), but there is a strong
|
|
* correspondence between the two configurations.
|
|
*
|
|
* TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
|
|
* CHANGES TO vexpress-v2m.dtsi!
|
|
*/
|
|
|
|
/ {
|
|
smb@8000000 {
|
|
motherboard {
|
|
model = "V2M-P1";
|
|
arm,hbi = <0x190>;
|
|
arm,vexpress,site = <0>;
|
|
arm,v2m-memory-map = "rs1";
|
|
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
|
#address-cells = <2>; /* SMB chipselect number and offset */
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
ranges;
|
|
|
|
nor_flash: flash@0,00000000 {
|
|
compatible = "arm,vexpress-flash", "cfi-flash";
|
|
reg = <0 0x00000000 0x04000000>,
|
|
<4 0x00000000 0x04000000>;
|
|
bank-width = <4>;
|
|
partitions {
|
|
compatible = "arm,arm-firmware-suite";
|
|
};
|
|
};
|
|
|
|
psram@1,00000000 {
|
|
compatible = "arm,vexpress-psram", "mtd-ram";
|
|
reg = <1 0x00000000 0x02000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
ethernet@2,02000000 {
|
|
compatible = "smsc,lan9118", "smsc,lan9115";
|
|
reg = <2 0x02000000 0x10000>;
|
|
interrupts = <15>;
|
|
phy-mode = "mii";
|
|
reg-io-width = <4>;
|
|
smsc,irq-active-high;
|
|
smsc,irq-push-pull;
|
|
vdd33a-supply = <&v2m_fixed_3v3>;
|
|
vddvario-supply = <&v2m_fixed_3v3>;
|
|
};
|
|
|
|
usb@2,03000000 {
|
|
compatible = "nxp,usb-isp1761";
|
|
reg = <2 0x03000000 0x20000>;
|
|
interrupts = <16>;
|
|
port1-otg;
|
|
};
|
|
|
|
iofpga@3,00000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 3 0 0x200000>;
|
|
|
|
v2m_sysreg: sysreg@10000 {
|
|
compatible = "arm,vexpress-sysreg";
|
|
reg = <0x010000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x10000 0x1000>;
|
|
|
|
v2m_led_gpios: gpio@8 {
|
|
compatible = "arm,vexpress-sysreg,sys_led";
|
|
reg = <0x008 4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
v2m_mmc_gpios: gpio@48 {
|
|
compatible = "arm,vexpress-sysreg,sys_mci";
|
|
reg = <0x048 4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
v2m_flash_gpios: gpio@4c {
|
|
compatible = "arm,vexpress-sysreg,sys_flash";
|
|
reg = <0x04c 4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
v2m_sysctl: sysctl@20000 {
|
|
compatible = "arm,sp810", "arm,primecell";
|
|
reg = <0x020000 0x1000>;
|
|
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
|
clock-names = "refclk", "timclk", "apb_pclk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
|
assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
|
|
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
|
|
};
|
|
|
|
/* PCI-E I2C bus */
|
|
v2m_i2c_pcie: i2c@30000 {
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x030000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pcie-switch@60 {
|
|
compatible = "idt,89hpes32h8";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
aaci@40000 {
|
|
compatible = "arm,pl041", "arm,primecell";
|
|
reg = <0x040000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&smbclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
mmci@50000 {
|
|
compatible = "arm,pl180", "arm,primecell";
|
|
reg = <0x050000 0x1000>;
|
|
interrupts = <9>, <10>;
|
|
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
|
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
|
max-frequency = <12000000>;
|
|
vmmc-supply = <&v2m_fixed_3v3>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
};
|
|
|
|
kmi@60000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x060000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
kmi@70000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x070000 0x1000>;
|
|
interrupts = <13>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial0: uart@90000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x090000 0x1000>;
|
|
interrupts = <5>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial1: uart@a0000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0a0000 0x1000>;
|
|
interrupts = <6>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial2: uart@b0000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0b0000 0x1000>;
|
|
interrupts = <7>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial3: uart@c0000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0c0000 0x1000>;
|
|
interrupts = <8>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
wdt@f0000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0x0f0000 0x1000>;
|
|
interrupts = <0>;
|
|
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
|
clock-names = "wdogclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_timer01: timer@110000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x110000 0x1000>;
|
|
interrupts = <2>;
|
|
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
|
};
|
|
|
|
v2m_timer23: timer@120000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x120000 0x1000>;
|
|
interrupts = <3>;
|
|
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
|
};
|
|
|
|
/* DVI I2C bus */
|
|
v2m_i2c_dvi: i2c@160000 {
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x160000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dvi-transmitter@39 {
|
|
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
|
reg = <0x39>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
dvi_bridge_in: endpoint {
|
|
remote-endpoint = <&clcd_pads>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dvi-transmitter@60 {
|
|
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
rtc@170000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x170000 0x1000>;
|
|
interrupts = <4>;
|
|
clocks = <&smbclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
compact-flash@1a0000 {
|
|
compatible = "arm,vexpress-cf", "ata-generic";
|
|
reg = <0x1a0000 0x100
|
|
0x1a0100 0xf00>;
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
clcd@1f0000 {
|
|
compatible = "arm,pl111", "arm,primecell";
|
|
reg = <0x1f0000 0x1000>;
|
|
interrupt-names = "combined";
|
|
interrupts = <14>;
|
|
clocks = <&v2m_oscclk1>, <&smbclk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
/* 800x600 16bpp @36MHz works fine */
|
|
max-memory-bandwidth = <54000000>;
|
|
memory-region = <&vram>;
|
|
|
|
port {
|
|
clcd_pads: endpoint {
|
|
remote-endpoint = <&dvi_bridge_in>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
v2m_fixed_3v3: fixed-regulator-0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
v2m_clk24mhz: clk24mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "v2m:clk24mhz";
|
|
};
|
|
|
|
v2m_refclk1mhz: refclk1mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000>;
|
|
clock-output-names = "v2m:refclk1mhz";
|
|
};
|
|
|
|
v2m_refclk32khz: refclk32khz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "v2m:refclk32khz";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
user1 {
|
|
label = "v2m:green:user1";
|
|
gpios = <&v2m_led_gpios 0 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
user2 {
|
|
label = "v2m:green:user2";
|
|
gpios = <&v2m_led_gpios 1 0>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
user3 {
|
|
label = "v2m:green:user3";
|
|
gpios = <&v2m_led_gpios 2 0>;
|
|
linux,default-trigger = "cpu0";
|
|
};
|
|
|
|
user4 {
|
|
label = "v2m:green:user4";
|
|
gpios = <&v2m_led_gpios 3 0>;
|
|
linux,default-trigger = "cpu1";
|
|
};
|
|
|
|
user5 {
|
|
label = "v2m:green:user5";
|
|
gpios = <&v2m_led_gpios 4 0>;
|
|
linux,default-trigger = "cpu2";
|
|
};
|
|
|
|
user6 {
|
|
label = "v2m:green:user6";
|
|
gpios = <&v2m_led_gpios 5 0>;
|
|
linux,default-trigger = "cpu3";
|
|
};
|
|
|
|
user7 {
|
|
label = "v2m:green:user7";
|
|
gpios = <&v2m_led_gpios 6 0>;
|
|
linux,default-trigger = "cpu4";
|
|
};
|
|
|
|
user8 {
|
|
label = "v2m:green:user8";
|
|
gpios = <&v2m_led_gpios 7 0>;
|
|
linux,default-trigger = "cpu5";
|
|
};
|
|
};
|
|
|
|
mcc {
|
|
compatible = "arm,vexpress,config-bus";
|
|
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
|
|
|
oscclk0 {
|
|
/* MCC static memory clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 0>;
|
|
freq-range = <25000000 60000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk0";
|
|
};
|
|
|
|
v2m_oscclk1: oscclk1 {
|
|
/* CLCD clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 1>;
|
|
freq-range = <23750000 65000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk1";
|
|
};
|
|
|
|
v2m_oscclk2: oscclk2 {
|
|
/* IO FPGA peripheral clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 2>;
|
|
freq-range = <24000000 24000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk2";
|
|
};
|
|
|
|
volt-vio {
|
|
/* Logic level voltage */
|
|
compatible = "arm,vexpress-volt";
|
|
arm,vexpress-sysreg,func = <2 0>;
|
|
regulator-name = "VIO";
|
|
regulator-always-on;
|
|
label = "VIO";
|
|
};
|
|
|
|
temp-mcc {
|
|
/* MCC internal operating temperature */
|
|
compatible = "arm,vexpress-temp";
|
|
arm,vexpress-sysreg,func = <4 0>;
|
|
label = "MCC";
|
|
};
|
|
|
|
reset {
|
|
compatible = "arm,vexpress-reset";
|
|
arm,vexpress-sysreg,func = <5 0>;
|
|
};
|
|
|
|
muxfpga {
|
|
compatible = "arm,vexpress-muxfpga";
|
|
arm,vexpress-sysreg,func = <7 0>;
|
|
};
|
|
|
|
shutdown {
|
|
compatible = "arm,vexpress-shutdown";
|
|
arm,vexpress-sysreg,func = <8 0>;
|
|
};
|
|
|
|
reboot {
|
|
compatible = "arm,vexpress-reboot";
|
|
arm,vexpress-sysreg,func = <9 0>;
|
|
};
|
|
|
|
dvimode {
|
|
compatible = "arm,vexpress-dvimode";
|
|
arm,vexpress-sysreg,func = <11 0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|