linux-stable/drivers/mfd/bcm590xx.c
Linus Torvalds 1fe9eb1847 Changes to existing drivers:
- Increase DT coverage - arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm
  - Regmap use of and/or clean-up - tps65090, twl6040
  - Basic renaming - max14577
  - Use new cpufreq helpers -  db8500-prcmu
  - Increase regulator support - stmpe, arizona, wm5102
  - Reduce legacy GPIO overhead - stmpe
  - Provide necessary remove path - bcm590xx
  - Expand sysfs presence - kempld
  - Move driver specific code out to drivers - rtc-s5m, arizona
  - Clk handling - twl6040
  - Use managed (devm_*) resources - ipaq-micro
  - Clean-up/remove unused/duplicated code - tps65218, sec, pm8921, abx500-core
    		   		     	    db8500-prcmu, menelaus
  - Build/boot/sematic bug fixes - rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx
                                   rdc321x-southbridge, mfd-core, sec, max14577
 				  syscon, cros_ec_spi
  - Constify stuff 		- sm501, tps65910, tps6507x, tps6586x, max77686,
    	    	  		  max8997, kempld, max77693, max8907, rtsx_usb
 				  db8500-prcmu, max8998, wm8400, sec, lp3943,
 				  max14577, as3711, omap-usb-host, ipaq-micro
 Support for new devices:
  - Add support for max77836 into max14577
  - Add support for tps658640 into tps6586x
  - Add support for cros-ec-i2c-tunnel into cros_ec
  - Add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
  - Add new driver for axp20x
  - Add new driver for sun6i-prcm
  - Add new driver for ipaq-micro
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTkEAyAAoJEFGvii+H/HdhYdMP/j0MCmbORM9mr84Uuhi0PfBZ
 yE1zlhLQHtqQEcp4Ih6vWxIbgdhyHy3CqIiCKkhSTH0TWfreBX7DmlSc1QAKazpy
 sXeD/pB5TSIIfAHVh4NXF51WMzZ8OvQrmJQwdjUY1Sal2tlDCUdc84qtnn+3/J9N
 JIKpf4E1IeWojE8F3koKBcyE6ZzkAthIzWNDU9/y+sIZZEqPVRu9Y3mpdhPo6P3I
 9TboZ/s2cAwad56iArFMOCvtg1xpn0WyS0HgAxpSa9X5qLRjYPX5GnBBz8zKJYm3
 xHCiD6SgN29xX9W+MkcvtgEghhMfOkPgwF69u2/eagbtNEOm50cyLrvAe+SKjRvE
 pODs5yvHJap29cbVafHSdzV+zLZ51J/Oi/TFsG8/VBbd4DyW7oSM4juT20TFSiNt
 Edwzd4gicg/NxA7TupFCRQLgwAa3fnpPeCtsIims7LU7SclPuwNgS31isOGAkOvd
 mMaBa1clZb50Dy2iL8m1ugyqdOZXs9S24j3u+B0TTJyabMbNhDTGUwBG4/PrlJHq
 fIysx6CdNUGLikG2PybFvhCf3+FkEoPPtkloM1sblkhPHVunVlhXPRYAE90W2jUA
 dDQ2Aco/idWSGRZ5t7kA8OBN3+PwiIpxTt/D4eDmS7Qe/v3KXvhUYuKl2mD5+IfC
 StFiP5cd3zyJvWTeexuW
 =GYTU
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon,
     sun6i-prcm
   - regmap use of and/or clean-up: tps65090, twl6040
   - basic renaming: max14577
   - use new cpufreq helpers: db8500-prcmu
   - increase regulator support: stmpe, arizona, wm5102
   - reduce legacy GPIO overhead: stmpe
   - provide necessary remove path: bcm590xx
   - expand sysfs presence: kempld
   - move driver specific code out to drivers: rtc-s5m, arizona
   - clk handling: twl6040
   - use managed (devm_*) resources: ipaq-micro
   - clean-up/remove unused/duplicated code: tps65218, sec, pm8921,
     abx500-core, db8500-prcmu, menelaus
   - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500,
     mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon,
     cros_ec_spi
   - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686,
     max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu,
     max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host,
     ipaq-micro

  Support for new devices:
   - add support for max77836 into max14577
   - add support for tps658640 into tps6586x
   - add support for cros-ec-i2c-tunnel into cros_ec
   - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
   - add new driver for axp20x
   - add new driver for sun6i-prcm
   - add new driver for ipaq-micro"

* tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits)
  mfd: wm5102: Correct default for LDO Control 2 register
  mfd: menelaus: Use module_i2c_driver
  mfd: tps65218: Terminate of match table
  mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG
  mfd: ti-keystone-devctrl: Add bindings for device state control
  mfd: palmas: Format the header file
  mfd: abx500-core: Remove unused function abx500_dump_all_banks()
  mfd: arizona: Correct addresses of always-on trigger registers
  mfd: max14577: Cast to architecture agnostic data type
  i2c: ChromeOS EC tunnel driver
  mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources
  mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms
  mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable
  mfd: cros_ec: spi: Add mutex to cros_ec_spi
  mfd: cros_ec: spi: Calculate delay between transfers correctly
  mfd: arizona: Correct error message for addition of main IRQ chip
  mfd: wm8997: Add registers for high power mode
  mfd: arizona: Add MICVDD to mapped regulators
  mfd: ipaq-micro: Make mfd_cell array const
  mfd: ipaq-micro: Use devm_ioremap_resource()
  ...
2014-06-06 12:08:39 -07:00

132 lines
3.4 KiB
C

/*
* Broadcom BCM590xx PMU
*
* Copyright 2014 Linaro Limited
* Author: Matt Porter <mporter@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/mfd/bcm590xx.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
static const struct mfd_cell bcm590xx_devs[] = {
{
.name = "bcm590xx-vregs",
},
};
static const struct regmap_config bcm590xx_regmap_config_pri = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BCM590XX_MAX_REGISTER_PRI,
.cache_type = REGCACHE_RBTREE,
};
static const struct regmap_config bcm590xx_regmap_config_sec = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BCM590XX_MAX_REGISTER_SEC,
.cache_type = REGCACHE_RBTREE,
};
static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
const struct i2c_device_id *id)
{
struct bcm590xx *bcm590xx;
int ret;
bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL);
if (!bcm590xx)
return -ENOMEM;
i2c_set_clientdata(i2c_pri, bcm590xx);
bcm590xx->dev = &i2c_pri->dev;
bcm590xx->i2c_pri = i2c_pri;
bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
&bcm590xx_regmap_config_pri);
if (IS_ERR(bcm590xx->regmap_pri)) {
ret = PTR_ERR(bcm590xx->regmap_pri);
dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret);
return ret;
}
/* Secondary I2C slave address is the base address with A(2) asserted */
bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
i2c_pri->addr | BIT(2));
if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) {
dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
return -ENODEV;
}
i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec,
&bcm590xx_regmap_config_sec);
if (IS_ERR(bcm590xx->regmap_sec)) {
ret = PTR_ERR(bcm590xx->regmap_sec);
dev_err(&bcm590xx->i2c_sec->dev,
"secondary regmap init failed: %d\n", ret);
goto err;
}
ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs,
ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
if (ret < 0) {
dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret);
goto err;
}
return 0;
err:
i2c_unregister_device(bcm590xx->i2c_sec);
return ret;
}
static int bcm590xx_i2c_remove(struct i2c_client *i2c)
{
mfd_remove_devices(&i2c->dev);
return 0;
}
static const struct of_device_id bcm590xx_of_match[] = {
{ .compatible = "brcm,bcm59056" },
{ }
};
MODULE_DEVICE_TABLE(of, bcm590xx_of_match);
static const struct i2c_device_id bcm590xx_i2c_id[] = {
{ "bcm59056" },
{ }
};
MODULE_DEVICE_TABLE(i2c, bcm590xx_i2c_id);
static struct i2c_driver bcm590xx_i2c_driver = {
.driver = {
.name = "bcm590xx",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(bcm590xx_of_match),
},
.probe = bcm590xx_i2c_probe,
.remove = bcm590xx_i2c_remove,
.id_table = bcm590xx_i2c_id,
};
module_i2c_driver(bcm590xx_i2c_driver);
MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
MODULE_DESCRIPTION("BCM590xx multi-function driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("i2c:bcm590xx");