mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 03:10:12 +00:00
![Stephen M. Cameron](/assets/img/avatar_default.png)
CTLR_STATE_CHANGE_EVENT and CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL do not require rescans to be initiated. Current firmware filters out these events already, but some out of date firmware doesn't, so the driver needs to filter them out too. Without this change and with out of date firmware you may see the driver spending a lot of time scanning devices unnecessarily on some Smart Arrays. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reviewed-by: Justin Lindley <justin.lindley@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
585 lines
17 KiB
C
585 lines
17 KiB
C
/*
|
|
* Disk Array driver for HP Smart Array SAS controllers
|
|
* Copyright 2000, 2014 Hewlett-Packard Development Company, L.P.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
|
|
*
|
|
*/
|
|
#ifndef HPSA_H
|
|
#define HPSA_H
|
|
|
|
#include <scsi/scsicam.h>
|
|
|
|
#define IO_OK 0
|
|
#define IO_ERROR 1
|
|
|
|
struct ctlr_info;
|
|
|
|
struct access_method {
|
|
void (*submit_command)(struct ctlr_info *h,
|
|
struct CommandList *c);
|
|
void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
|
|
unsigned long (*fifo_full)(struct ctlr_info *h);
|
|
bool (*intr_pending)(struct ctlr_info *h);
|
|
unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
|
|
};
|
|
|
|
struct hpsa_scsi_dev_t {
|
|
int devtype;
|
|
int bus, target, lun; /* as presented to the OS */
|
|
unsigned char scsi3addr[8]; /* as presented to the HW */
|
|
#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
|
|
unsigned char device_id[16]; /* from inquiry pg. 0x83 */
|
|
unsigned char vendor[8]; /* bytes 8-15 of inquiry data */
|
|
unsigned char model[16]; /* bytes 16-31 of inquiry data */
|
|
unsigned char raid_level; /* from inquiry page 0xC1 */
|
|
unsigned char volume_offline; /* discovered via TUR or VPD */
|
|
u32 ioaccel_handle;
|
|
int offload_config; /* I/O accel RAID offload configured */
|
|
int offload_enabled; /* I/O accel RAID offload enabled */
|
|
int offload_to_mirror; /* Send next I/O accelerator RAID
|
|
* offload request to mirror drive
|
|
*/
|
|
struct raid_map_data raid_map; /* I/O accelerator RAID map */
|
|
|
|
};
|
|
|
|
struct reply_queue_buffer {
|
|
u64 *head;
|
|
size_t size;
|
|
u8 wraparound;
|
|
u32 current_entry;
|
|
dma_addr_t busaddr;
|
|
};
|
|
|
|
#pragma pack(1)
|
|
struct bmic_controller_parameters {
|
|
u8 led_flags;
|
|
u8 enable_command_list_verification;
|
|
u8 backed_out_write_drives;
|
|
u16 stripes_for_parity;
|
|
u8 parity_distribution_mode_flags;
|
|
u16 max_driver_requests;
|
|
u16 elevator_trend_count;
|
|
u8 disable_elevator;
|
|
u8 force_scan_complete;
|
|
u8 scsi_transfer_mode;
|
|
u8 force_narrow;
|
|
u8 rebuild_priority;
|
|
u8 expand_priority;
|
|
u8 host_sdb_asic_fix;
|
|
u8 pdpi_burst_from_host_disabled;
|
|
char software_name[64];
|
|
char hardware_name[32];
|
|
u8 bridge_revision;
|
|
u8 snapshot_priority;
|
|
u32 os_specific;
|
|
u8 post_prompt_timeout;
|
|
u8 automatic_drive_slamming;
|
|
u8 reserved1;
|
|
u8 nvram_flags;
|
|
#define HBA_MODE_ENABLED_FLAG (1 << 3)
|
|
u8 cache_nvram_flags;
|
|
u8 drive_config_flags;
|
|
u16 reserved2;
|
|
u8 temp_warning_level;
|
|
u8 temp_shutdown_level;
|
|
u8 temp_condition_reset;
|
|
u8 max_coalesce_commands;
|
|
u32 max_coalesce_delay;
|
|
u8 orca_password[4];
|
|
u8 access_id[16];
|
|
u8 reserved[356];
|
|
};
|
|
#pragma pack()
|
|
|
|
struct ctlr_info {
|
|
int ctlr;
|
|
char devname[8];
|
|
char *product_name;
|
|
struct pci_dev *pdev;
|
|
u32 board_id;
|
|
void __iomem *vaddr;
|
|
unsigned long paddr;
|
|
int nr_cmds; /* Number of commands allowed on this controller */
|
|
struct CfgTable __iomem *cfgtable;
|
|
int interrupts_enabled;
|
|
int max_commands;
|
|
int commands_outstanding;
|
|
# define PERF_MODE_INT 0
|
|
# define DOORBELL_INT 1
|
|
# define SIMPLE_MODE_INT 2
|
|
# define MEMQ_MODE_INT 3
|
|
unsigned int intr[MAX_REPLY_QUEUES];
|
|
unsigned int msix_vector;
|
|
unsigned int msi_vector;
|
|
int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */
|
|
struct access_method access;
|
|
char hba_mode_enabled;
|
|
|
|
/* queue and queue Info */
|
|
struct list_head reqQ;
|
|
struct list_head cmpQ;
|
|
unsigned int Qdepth;
|
|
unsigned int maxSG;
|
|
spinlock_t lock;
|
|
int maxsgentries;
|
|
u8 max_cmd_sg_entries;
|
|
int chainsize;
|
|
struct SGDescriptor **cmd_sg_list;
|
|
|
|
/* pointers to command and error info pool */
|
|
struct CommandList *cmd_pool;
|
|
dma_addr_t cmd_pool_dhandle;
|
|
struct io_accel1_cmd *ioaccel_cmd_pool;
|
|
dma_addr_t ioaccel_cmd_pool_dhandle;
|
|
struct io_accel2_cmd *ioaccel2_cmd_pool;
|
|
dma_addr_t ioaccel2_cmd_pool_dhandle;
|
|
struct ErrorInfo *errinfo_pool;
|
|
dma_addr_t errinfo_pool_dhandle;
|
|
unsigned long *cmd_pool_bits;
|
|
int scan_finished;
|
|
spinlock_t scan_lock;
|
|
wait_queue_head_t scan_wait_queue;
|
|
|
|
struct Scsi_Host *scsi_host;
|
|
spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */
|
|
int ndevices; /* number of used elements in .dev[] array. */
|
|
struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
|
|
/*
|
|
* Performant mode tables.
|
|
*/
|
|
u32 trans_support;
|
|
u32 trans_offset;
|
|
struct TransTable_struct *transtable;
|
|
unsigned long transMethod;
|
|
|
|
/* cap concurrent passthrus at some reasonable maximum */
|
|
#define HPSA_MAX_CONCURRENT_PASSTHRUS (20)
|
|
spinlock_t passthru_count_lock; /* protects passthru_count */
|
|
int passthru_count;
|
|
|
|
/*
|
|
* Performant mode completion buffers
|
|
*/
|
|
size_t reply_queue_size;
|
|
struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES];
|
|
u8 nreply_queues;
|
|
u32 *blockFetchTable;
|
|
u32 *ioaccel1_blockFetchTable;
|
|
u32 *ioaccel2_blockFetchTable;
|
|
u32 *ioaccel2_bft2_regs;
|
|
unsigned char *hba_inquiry_data;
|
|
u32 driver_support;
|
|
u32 fw_support;
|
|
int ioaccel_support;
|
|
int ioaccel_maxsg;
|
|
u64 last_intr_timestamp;
|
|
u32 last_heartbeat;
|
|
u64 last_heartbeat_timestamp;
|
|
u32 heartbeat_sample_interval;
|
|
atomic_t firmware_flash_in_progress;
|
|
u32 *lockup_detected;
|
|
struct delayed_work monitor_ctlr_work;
|
|
int remove_in_progress;
|
|
u32 fifo_recently_full;
|
|
/* Address of h->q[x] is passed to intr handler to know which queue */
|
|
u8 q[MAX_REPLY_QUEUES];
|
|
u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
|
|
#define HPSATMF_BITS_SUPPORTED (1 << 0)
|
|
#define HPSATMF_PHYS_LUN_RESET (1 << 1)
|
|
#define HPSATMF_PHYS_NEX_RESET (1 << 2)
|
|
#define HPSATMF_PHYS_TASK_ABORT (1 << 3)
|
|
#define HPSATMF_PHYS_TSET_ABORT (1 << 4)
|
|
#define HPSATMF_PHYS_CLEAR_ACA (1 << 5)
|
|
#define HPSATMF_PHYS_CLEAR_TSET (1 << 6)
|
|
#define HPSATMF_PHYS_QRY_TASK (1 << 7)
|
|
#define HPSATMF_PHYS_QRY_TSET (1 << 8)
|
|
#define HPSATMF_PHYS_QRY_ASYNC (1 << 9)
|
|
#define HPSATMF_MASK_SUPPORTED (1 << 16)
|
|
#define HPSATMF_LOG_LUN_RESET (1 << 17)
|
|
#define HPSATMF_LOG_NEX_RESET (1 << 18)
|
|
#define HPSATMF_LOG_TASK_ABORT (1 << 19)
|
|
#define HPSATMF_LOG_TSET_ABORT (1 << 20)
|
|
#define HPSATMF_LOG_CLEAR_ACA (1 << 21)
|
|
#define HPSATMF_LOG_CLEAR_TSET (1 << 22)
|
|
#define HPSATMF_LOG_QRY_TASK (1 << 23)
|
|
#define HPSATMF_LOG_QRY_TSET (1 << 24)
|
|
#define HPSATMF_LOG_QRY_ASYNC (1 << 25)
|
|
u32 events;
|
|
#define CTLR_STATE_CHANGE_EVENT (1 << 0)
|
|
#define CTLR_ENCLOSURE_HOT_PLUG_EVENT (1 << 1)
|
|
#define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV (1 << 4)
|
|
#define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV (1 << 5)
|
|
#define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL (1 << 6)
|
|
#define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED (1 << 30)
|
|
#define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE (1 << 31)
|
|
|
|
#define RESCAN_REQUIRED_EVENT_BITS \
|
|
(CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
|
|
CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \
|
|
CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \
|
|
CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \
|
|
CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE)
|
|
spinlock_t offline_device_lock;
|
|
struct list_head offline_device_list;
|
|
int acciopath_status;
|
|
int drv_req_rescan; /* flag for driver to request rescan event */
|
|
int raid_offload_debug;
|
|
};
|
|
|
|
struct offline_device_entry {
|
|
unsigned char scsi3addr[8];
|
|
struct list_head offline_list;
|
|
};
|
|
|
|
#define HPSA_ABORT_MSG 0
|
|
#define HPSA_DEVICE_RESET_MSG 1
|
|
#define HPSA_RESET_TYPE_CONTROLLER 0x00
|
|
#define HPSA_RESET_TYPE_BUS 0x01
|
|
#define HPSA_RESET_TYPE_TARGET 0x03
|
|
#define HPSA_RESET_TYPE_LUN 0x04
|
|
#define HPSA_MSG_SEND_RETRY_LIMIT 10
|
|
#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
|
|
|
|
/* Maximum time in seconds driver will wait for command completions
|
|
* when polling before giving up.
|
|
*/
|
|
#define HPSA_MAX_POLL_TIME_SECS (20)
|
|
|
|
/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines
|
|
* how many times to retry TEST UNIT READY on a device
|
|
* while waiting for it to become ready before giving up.
|
|
* HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval
|
|
* between sending TURs while waiting for a device
|
|
* to become ready.
|
|
*/
|
|
#define HPSA_TUR_RETRY_LIMIT (20)
|
|
#define HPSA_MAX_WAIT_INTERVAL_SECS (30)
|
|
|
|
/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board
|
|
* to become ready, in seconds, before giving up on it.
|
|
* HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
|
|
* between polling the board to see if it is ready, in
|
|
* milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and
|
|
* HPSA_BOARD_READY_ITERATIONS are derived from those.
|
|
*/
|
|
#define HPSA_BOARD_READY_WAIT_SECS (120)
|
|
#define HPSA_BOARD_NOT_READY_WAIT_SECS (100)
|
|
#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
|
|
#define HPSA_BOARD_READY_POLL_INTERVAL \
|
|
((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
|
|
#define HPSA_BOARD_READY_ITERATIONS \
|
|
((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
|
|
HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
|
|
#define HPSA_BOARD_NOT_READY_ITERATIONS \
|
|
((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \
|
|
HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
|
|
#define HPSA_POST_RESET_PAUSE_MSECS (3000)
|
|
#define HPSA_POST_RESET_NOOP_RETRIES (12)
|
|
|
|
/* Defining the diffent access_menthods */
|
|
/*
|
|
* Memory mapped FIFO interface (SMART 53xx cards)
|
|
*/
|
|
#define SA5_DOORBELL 0x20
|
|
#define SA5_REQUEST_PORT_OFFSET 0x40
|
|
#define SA5_REPLY_INTR_MASK_OFFSET 0x34
|
|
#define SA5_REPLY_PORT_OFFSET 0x44
|
|
#define SA5_INTR_STATUS 0x30
|
|
#define SA5_SCRATCHPAD_OFFSET 0xB0
|
|
|
|
#define SA5_CTCFG_OFFSET 0xB4
|
|
#define SA5_CTMEM_OFFSET 0xB8
|
|
|
|
#define SA5_INTR_OFF 0x08
|
|
#define SA5B_INTR_OFF 0x04
|
|
#define SA5_INTR_PENDING 0x08
|
|
#define SA5B_INTR_PENDING 0x04
|
|
#define FIFO_EMPTY 0xffffffff
|
|
#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */
|
|
|
|
#define HPSA_ERROR_BIT 0x02
|
|
|
|
/* Performant mode flags */
|
|
#define SA5_PERF_INTR_PENDING 0x04
|
|
#define SA5_PERF_INTR_OFF 0x05
|
|
#define SA5_OUTDB_STATUS_PERF_BIT 0x01
|
|
#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
|
|
#define SA5_OUTDB_CLEAR 0xA0
|
|
#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
|
|
#define SA5_OUTDB_STATUS 0x9C
|
|
|
|
|
|
#define HPSA_INTR_ON 1
|
|
#define HPSA_INTR_OFF 0
|
|
|
|
/*
|
|
* Inbound Post Queue offsets for IO Accelerator Mode 2
|
|
*/
|
|
#define IOACCEL2_INBOUND_POSTQ_32 0x48
|
|
#define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0
|
|
#define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4
|
|
|
|
/*
|
|
Send the command to the hardware
|
|
*/
|
|
static void SA5_submit_command(struct ctlr_info *h,
|
|
struct CommandList *c)
|
|
{
|
|
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
|
|
(void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
|
|
}
|
|
|
|
static void SA5_submit_command_no_read(struct ctlr_info *h,
|
|
struct CommandList *c)
|
|
{
|
|
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
|
|
}
|
|
|
|
static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
|
|
struct CommandList *c)
|
|
{
|
|
if (c->cmd_type == CMD_IOACCEL2)
|
|
writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
|
|
else
|
|
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
|
|
}
|
|
|
|
/*
|
|
* This card is the opposite of the other cards.
|
|
* 0 turns interrupts on...
|
|
* 0x08 turns them off...
|
|
*/
|
|
static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
|
|
{
|
|
if (val) { /* Turn interrupts on */
|
|
h->interrupts_enabled = 1;
|
|
writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
} else { /* Turn them off */
|
|
h->interrupts_enabled = 0;
|
|
writel(SA5_INTR_OFF,
|
|
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
}
|
|
}
|
|
|
|
static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
|
|
{
|
|
if (val) { /* turn on interrupts */
|
|
h->interrupts_enabled = 1;
|
|
writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
} else {
|
|
h->interrupts_enabled = 0;
|
|
writel(SA5_PERF_INTR_OFF,
|
|
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
(void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
|
|
}
|
|
}
|
|
|
|
static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
|
|
{
|
|
struct reply_queue_buffer *rq = &h->reply_queue[q];
|
|
unsigned long flags, register_value = FIFO_EMPTY;
|
|
|
|
/* msi auto clears the interrupt pending bit. */
|
|
if (!(h->msi_vector || h->msix_vector)) {
|
|
/* flush the controller write of the reply queue by reading
|
|
* outbound doorbell status register.
|
|
*/
|
|
register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
|
|
writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
|
|
/* Do a read in order to flush the write to the controller
|
|
* (as per spec.)
|
|
*/
|
|
register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
|
|
}
|
|
|
|
if ((rq->head[rq->current_entry] & 1) == rq->wraparound) {
|
|
register_value = rq->head[rq->current_entry];
|
|
rq->current_entry++;
|
|
spin_lock_irqsave(&h->lock, flags);
|
|
h->commands_outstanding--;
|
|
spin_unlock_irqrestore(&h->lock, flags);
|
|
} else {
|
|
register_value = FIFO_EMPTY;
|
|
}
|
|
/* Check for wraparound */
|
|
if (rq->current_entry == h->max_commands) {
|
|
rq->current_entry = 0;
|
|
rq->wraparound ^= 1;
|
|
}
|
|
return register_value;
|
|
}
|
|
|
|
/*
|
|
* Returns true if fifo is full.
|
|
*
|
|
*/
|
|
static unsigned long SA5_fifo_full(struct ctlr_info *h)
|
|
{
|
|
if (h->commands_outstanding >= h->max_commands)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
|
|
}
|
|
/*
|
|
* returns value read from hardware.
|
|
* returns FIFO_EMPTY if there is nothing to read
|
|
*/
|
|
static unsigned long SA5_completed(struct ctlr_info *h,
|
|
__attribute__((unused)) u8 q)
|
|
{
|
|
unsigned long register_value
|
|
= readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
|
|
unsigned long flags;
|
|
|
|
if (register_value != FIFO_EMPTY) {
|
|
spin_lock_irqsave(&h->lock, flags);
|
|
h->commands_outstanding--;
|
|
spin_unlock_irqrestore(&h->lock, flags);
|
|
}
|
|
|
|
#ifdef HPSA_DEBUG
|
|
if (register_value != FIFO_EMPTY)
|
|
dev_dbg(&h->pdev->dev, "Read %lx back from board\n",
|
|
register_value);
|
|
else
|
|
dev_dbg(&h->pdev->dev, "FIFO Empty read\n");
|
|
#endif
|
|
|
|
return register_value;
|
|
}
|
|
/*
|
|
* Returns true if an interrupt is pending..
|
|
*/
|
|
static bool SA5_intr_pending(struct ctlr_info *h)
|
|
{
|
|
unsigned long register_value =
|
|
readl(h->vaddr + SA5_INTR_STATUS);
|
|
return register_value & SA5_INTR_PENDING;
|
|
}
|
|
|
|
static bool SA5_performant_intr_pending(struct ctlr_info *h)
|
|
{
|
|
unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
|
|
|
|
if (!register_value)
|
|
return false;
|
|
|
|
if (h->msi_vector || h->msix_vector)
|
|
return true;
|
|
|
|
/* Read outbound doorbell to flush */
|
|
register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
|
|
return register_value & SA5_OUTDB_STATUS_PERF_BIT;
|
|
}
|
|
|
|
#define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT 0x100
|
|
|
|
static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
|
|
{
|
|
unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
|
|
|
|
return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ?
|
|
true : false;
|
|
}
|
|
|
|
#define IOACCEL_MODE1_REPLY_QUEUE_INDEX 0x1A0
|
|
#define IOACCEL_MODE1_PRODUCER_INDEX 0x1B8
|
|
#define IOACCEL_MODE1_CONSUMER_INDEX 0x1BC
|
|
#define IOACCEL_MODE1_REPLY_UNUSED 0xFFFFFFFFFFFFFFFFULL
|
|
|
|
static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
|
|
{
|
|
u64 register_value;
|
|
struct reply_queue_buffer *rq = &h->reply_queue[q];
|
|
unsigned long flags;
|
|
|
|
BUG_ON(q >= h->nreply_queues);
|
|
|
|
register_value = rq->head[rq->current_entry];
|
|
if (register_value != IOACCEL_MODE1_REPLY_UNUSED) {
|
|
rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED;
|
|
if (++rq->current_entry == rq->size)
|
|
rq->current_entry = 0;
|
|
/*
|
|
* @todo
|
|
*
|
|
* Don't really need to write the new index after each command,
|
|
* but with current driver design this is easiest.
|
|
*/
|
|
wmb();
|
|
writel((q << 24) | rq->current_entry, h->vaddr +
|
|
IOACCEL_MODE1_CONSUMER_INDEX);
|
|
spin_lock_irqsave(&h->lock, flags);
|
|
h->commands_outstanding--;
|
|
spin_unlock_irqrestore(&h->lock, flags);
|
|
}
|
|
return (unsigned long) register_value;
|
|
}
|
|
|
|
static struct access_method SA5_access = {
|
|
SA5_submit_command,
|
|
SA5_intr_mask,
|
|
SA5_fifo_full,
|
|
SA5_intr_pending,
|
|
SA5_completed,
|
|
};
|
|
|
|
static struct access_method SA5_ioaccel_mode1_access = {
|
|
SA5_submit_command,
|
|
SA5_performant_intr_mask,
|
|
SA5_fifo_full,
|
|
SA5_ioaccel_mode1_intr_pending,
|
|
SA5_ioaccel_mode1_completed,
|
|
};
|
|
|
|
static struct access_method SA5_ioaccel_mode2_access = {
|
|
SA5_submit_command_ioaccel2,
|
|
SA5_performant_intr_mask,
|
|
SA5_fifo_full,
|
|
SA5_performant_intr_pending,
|
|
SA5_performant_completed,
|
|
};
|
|
|
|
static struct access_method SA5_performant_access = {
|
|
SA5_submit_command,
|
|
SA5_performant_intr_mask,
|
|
SA5_fifo_full,
|
|
SA5_performant_intr_pending,
|
|
SA5_performant_completed,
|
|
};
|
|
|
|
static struct access_method SA5_performant_access_no_read = {
|
|
SA5_submit_command_no_read,
|
|
SA5_performant_intr_mask,
|
|
SA5_fifo_full,
|
|
SA5_performant_intr_pending,
|
|
SA5_performant_completed,
|
|
};
|
|
|
|
struct board_type {
|
|
u32 board_id;
|
|
char *product_name;
|
|
struct access_method *access;
|
|
};
|
|
|
|
#endif /* HPSA_H */
|
|
|