linux-stable/include/linux/sdb.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

160 lines
4.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* This is the official version 1.1 of sdb.h
*/
#ifndef __SDB_H__
#define __SDB_H__
#ifdef __KERNEL__
#include <linux/types.h>
#else
#include <stdint.h>
#endif
/*
* All structures are 64 bytes long and are expected
* to live in an array, one for each interconnect.
* Most fields of the structures are shared among the
* various types, and most-specific fields are at the
* beginning (for alignment reasons, and to keep the
* magic number at the head of the interconnect record
*/
/* Product, 40 bytes at offset 24, 8-byte aligned
*
* device_id is vendor-assigned; version is device-specific,
* date is hex (e.g 0x20120501), name is UTF-8, blank-filled
* and not terminated with a 0 byte.
*/
struct sdb_product {
uint64_t vendor_id; /* 0x18..0x1f */
uint32_t device_id; /* 0x20..0x23 */
uint32_t version; /* 0x24..0x27 */
uint32_t date; /* 0x28..0x2b */
uint8_t name[19]; /* 0x2c..0x3e */
uint8_t record_type; /* 0x3f */
};
/*
* Component, 56 bytes at offset 8, 8-byte aligned
*
* The address range is first to last, inclusive
* (for example 0x100000 - 0x10ffff)
*/
struct sdb_component {
uint64_t addr_first; /* 0x08..0x0f */
uint64_t addr_last; /* 0x10..0x17 */
struct sdb_product product; /* 0x18..0x3f */
};
/* Type of the SDB record */
enum sdb_record_type {
sdb_type_interconnect = 0x00,
sdb_type_device = 0x01,
sdb_type_bridge = 0x02,
sdb_type_integration = 0x80,
sdb_type_repo_url = 0x81,
sdb_type_synthesis = 0x82,
sdb_type_empty = 0xFF,
};
/* Type 0: interconnect (first of the array)
*
* sdb_records is the length of the table including this first
* record, version is 1. The bus type is enumerated later.
*/
#define SDB_MAGIC 0x5344422d /* "SDB-" */
struct sdb_interconnect {
uint32_t sdb_magic; /* 0x00-0x03 */
uint16_t sdb_records; /* 0x04-0x05 */
uint8_t sdb_version; /* 0x06 */
uint8_t sdb_bus_type; /* 0x07 */
struct sdb_component sdb_component; /* 0x08-0x3f */
};
/* Type 1: device
*
* class is 0 for "custom device", other values are
* to be standardized; ABI version is for the driver,
* bus-specific bits are defined by each bus (see below)
*/
struct sdb_device {
uint16_t abi_class; /* 0x00-0x01 */
uint8_t abi_ver_major; /* 0x02 */
uint8_t abi_ver_minor; /* 0x03 */
uint32_t bus_specific; /* 0x04-0x07 */
struct sdb_component sdb_component; /* 0x08-0x3f */
};
/* Type 2: bridge
*
* child is the address of the nested SDB table
*/
struct sdb_bridge {
uint64_t sdb_child; /* 0x00-0x07 */
struct sdb_component sdb_component; /* 0x08-0x3f */
};
/* Type 0x80: integration
*
* all types with bit 7 set are meta-information, so
* software can ignore the types it doesn't know. Here we
* just provide product information for an aggregate device
*/
struct sdb_integration {
uint8_t reserved[24]; /* 0x00-0x17 */
struct sdb_product product; /* 0x08-0x3f */
};
/* Type 0x81: Top module repository url
*
* again, an informative field that software can ignore
*/
struct sdb_repo_url {
uint8_t repo_url[63]; /* 0x00-0x3e */
uint8_t record_type; /* 0x3f */
};
/* Type 0x82: Synthesis tool information
*
* this informative record
*/
struct sdb_synthesis {
uint8_t syn_name[16]; /* 0x00-0x0f */
uint8_t commit_id[16]; /* 0x10-0x1f */
uint8_t tool_name[8]; /* 0x20-0x27 */
uint32_t tool_version; /* 0x28-0x2b */
uint32_t date; /* 0x2c-0x2f */
uint8_t user_name[15]; /* 0x30-0x3e */
uint8_t record_type; /* 0x3f */
};
/* Type 0xff: empty
*
* this allows keeping empty slots during development,
* so they can be filled later with minimal efforts and
* no misleading description is ever shipped -- hopefully.
* It can also be used to pad a table to a desired length.
*/
struct sdb_empty {
uint8_t reserved[63]; /* 0x00-0x3e */
uint8_t record_type; /* 0x3f */
};
/* The type of bus, for bus-specific flags */
enum sdb_bus_type {
sdb_wishbone = 0x00,
sdb_data = 0x01,
};
#define SDB_WB_WIDTH_MASK 0x0f
#define SDB_WB_ACCESS8 0x01
#define SDB_WB_ACCESS16 0x02
#define SDB_WB_ACCESS32 0x04
#define SDB_WB_ACCESS64 0x08
#define SDB_WB_LITTLE_ENDIAN 0x80
#define SDB_DATA_READ 0x04
#define SDB_DATA_WRITE 0x02
#define SDB_DATA_EXEC 0x01
#endif /* __SDB_H__ */