mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Wang Chen](/assets/img/avatar_default.png)
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1815 lines
51 KiB
C
1815 lines
51 KiB
C
/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */
|
|
/*
|
|
Written 1994, 1995,1996 by Bao C. Ha.
|
|
|
|
Copyright (C) 1994, 1995,1996 by Bao C. Ha.
|
|
|
|
This software may be used and distributed
|
|
according to the terms of the GNU General Public License,
|
|
incorporated herein by reference.
|
|
|
|
The author may be reached at bao.ha@srs.gov
|
|
or 418 Hastings Place, Martinez, GA 30907.
|
|
|
|
Things remaining to do:
|
|
Better record keeping of errors.
|
|
Eliminate transmit interrupt to reduce overhead.
|
|
Implement "concurrent processing". I won't be doing it!
|
|
|
|
Bugs:
|
|
|
|
If you have a problem of not detecting the 82595 during a
|
|
reboot (warm reset), disable the FLASH memory should fix it.
|
|
This is a compatibility hardware problem.
|
|
|
|
Versions:
|
|
0.13b basic ethtool support (aris, 09/13/2004)
|
|
0.13a in memory shortage, drop packets also in board
|
|
(Michael Westermann <mw@microdata-pos.de>, 07/30/2002)
|
|
0.13 irq sharing, rewrote probe function, fixed a nasty bug in
|
|
hardware_send_packet and a major cleanup (aris, 11/08/2001)
|
|
0.12d fixing a problem with single card detected as eight eth devices
|
|
fixing a problem with sudden drop in card performance
|
|
(chris (asdn@go2.pl), 10/29/2001)
|
|
0.12c fixing some problems with old cards (aris, 01/08/2001)
|
|
0.12b misc fixes (aris, 06/26/2000)
|
|
0.12a port of version 0.12a of 2.2.x kernels to 2.3.x
|
|
(aris (aris@conectiva.com.br), 05/19/2000)
|
|
0.11e some tweaks about multiple cards support (PdP, jul/aug 1999)
|
|
0.11d added __initdata, __init stuff; call spin_lock_init
|
|
in eepro_probe1. Replaced "eepro" by dev->name. Augmented
|
|
the code protected by spin_lock in interrupt routine
|
|
(PdP, 12/12/1998)
|
|
0.11c minor cleanup (PdP, RMC, 09/12/1998)
|
|
0.11b Pascal Dupuis (dupuis@lei.ucl.ac.be): works as a module
|
|
under 2.1.xx. Debug messages are flagged as KERN_DEBUG to
|
|
avoid console flooding. Added locking at critical parts. Now
|
|
the dawn thing is SMP safe.
|
|
0.11a Attempt to get 2.1.xx support up (RMC)
|
|
0.11 Brian Candler added support for multiple cards. Tested as
|
|
a module, no idea if it works when compiled into kernel.
|
|
|
|
0.10e Rick Bressler notified me that ifconfig up;ifconfig down fails
|
|
because the irq is lost somewhere. Fixed that by moving
|
|
request_irq and free_irq to eepro_open and eepro_close respectively.
|
|
0.10d Ugh! Now Wakeup works. Was seriously broken in my first attempt.
|
|
I'll need to find a way to specify an ioport other than
|
|
the default one in the PnP case. PnP definitively sucks.
|
|
And, yes, this is not the only reason.
|
|
0.10c PnP Wakeup Test for 595FX. uncomment #define PnPWakeup;
|
|
to use.
|
|
0.10b Should work now with (some) Pro/10+. At least for
|
|
me (and my two cards) it does. _No_ guarantee for
|
|
function with non-Pro/10+ cards! (don't have any)
|
|
(RMC, 9/11/96)
|
|
|
|
0.10 Added support for the Etherexpress Pro/10+. The
|
|
IRQ map was changed significantly from the old
|
|
pro/10. The new interrupt map was provided by
|
|
Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu).
|
|
(BCH, 9/3/96)
|
|
|
|
0.09 Fixed a race condition in the transmit algorithm,
|
|
which causes crashes under heavy load with fast
|
|
pentium computers. The performance should also
|
|
improve a bit. The size of RX buffer, and hence
|
|
TX buffer, can also be changed via lilo or insmod.
|
|
(BCH, 7/31/96)
|
|
|
|
0.08 Implement 32-bit I/O for the 82595TX and 82595FX
|
|
based lan cards. Disable full-duplex mode if TPE
|
|
is not used. (BCH, 4/8/96)
|
|
|
|
0.07a Fix a stat report which counts every packet as a
|
|
heart-beat failure. (BCH, 6/3/95)
|
|
|
|
0.07 Modified to support all other 82595-based lan cards.
|
|
The IRQ vector of the EtherExpress Pro will be set
|
|
according to the value saved in the EEPROM. For other
|
|
cards, I will do autoirq_request() to grab the next
|
|
available interrupt vector. (BCH, 3/17/95)
|
|
|
|
0.06a,b Interim released. Minor changes in the comments and
|
|
print out format. (BCH, 3/9/95 and 3/14/95)
|
|
|
|
0.06 First stable release that I am comfortable with. (BCH,
|
|
3/2/95)
|
|
|
|
0.05 Complete testing of multicast. (BCH, 2/23/95)
|
|
|
|
0.04 Adding multicast support. (BCH, 2/14/95)
|
|
|
|
0.03 First widely alpha release for public testing.
|
|
(BCH, 2/14/95)
|
|
|
|
*/
|
|
|
|
static const char version[] =
|
|
"eepro.c: v0.13b 09/13/2004 aris@cathedrallabs.org\n";
|
|
|
|
#include <linux/module.h>
|
|
|
|
/*
|
|
Sources:
|
|
|
|
This driver wouldn't have been written without the availability
|
|
of the Crynwr's Lan595 driver source code. It helps me to
|
|
familiarize with the 82595 chipset while waiting for the Intel
|
|
documentation. I also learned how to detect the 82595 using
|
|
the packet driver's technique.
|
|
|
|
This driver is written by cutting and pasting the skeleton.c driver
|
|
provided by Donald Becker. I also borrowed the EEPROM routine from
|
|
Donald Becker's 82586 driver.
|
|
|
|
Datasheet for the Intel 82595 (including the TX and FX version). It
|
|
provides just enough info that the casual reader might think that it
|
|
documents the i82595.
|
|
|
|
The User Manual for the 82595. It provides a lot of the missing
|
|
information.
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/ethtool.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
|
|
#define DRV_NAME "eepro"
|
|
#define DRV_VERSION "0.13c"
|
|
|
|
#define compat_dev_kfree_skb( skb, mode ) dev_kfree_skb( (skb) )
|
|
/* I had reports of looong delays with SLOW_DOWN defined as udelay(2) */
|
|
#define SLOW_DOWN inb(0x80)
|
|
/* udelay(2) */
|
|
#define compat_init_data __initdata
|
|
enum iftype { AUI=0, BNC=1, TPE=2 };
|
|
|
|
/* First, a few definitions that the brave might change. */
|
|
/* A zero-terminated list of I/O addresses to be probed. */
|
|
static unsigned int eepro_portlist[] compat_init_data =
|
|
{ 0x300, 0x210, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0};
|
|
/* note: 0x300 is default, the 595FX supports ALL IO Ports
|
|
from 0x000 to 0x3F0, some of which are reserved in PCs */
|
|
|
|
/* To try the (not-really PnP Wakeup: */
|
|
/*
|
|
#define PnPWakeup
|
|
*/
|
|
|
|
/* use 0 for production, 1 for verification, >2 for debug */
|
|
#ifndef NET_DEBUG
|
|
#define NET_DEBUG 0
|
|
#endif
|
|
static unsigned int net_debug = NET_DEBUG;
|
|
|
|
/* The number of low I/O ports used by the ethercard. */
|
|
#define EEPRO_IO_EXTENT 16
|
|
|
|
/* Different 82595 chips */
|
|
#define LAN595 0
|
|
#define LAN595TX 1
|
|
#define LAN595FX 2
|
|
#define LAN595FX_10ISA 3
|
|
|
|
/* Information that need to be kept for each board. */
|
|
struct eepro_local {
|
|
unsigned rx_start;
|
|
unsigned tx_start; /* start of the transmit chain */
|
|
int tx_last; /* pointer to last packet in the transmit chain */
|
|
unsigned tx_end; /* end of the transmit chain (plus 1) */
|
|
int eepro; /* 1 for the EtherExpress Pro/10,
|
|
2 for the EtherExpress Pro/10+,
|
|
3 for the EtherExpress 10 (blue cards),
|
|
0 for other 82595-based lan cards. */
|
|
int version; /* a flag to indicate if this is a TX or FX
|
|
version of the 82595 chip. */
|
|
int stepping;
|
|
|
|
spinlock_t lock; /* Serializing lock */
|
|
|
|
unsigned rcv_ram; /* pre-calculated space for rx */
|
|
unsigned xmt_ram; /* pre-calculated space for tx */
|
|
unsigned char xmt_bar;
|
|
unsigned char xmt_lower_limit_reg;
|
|
unsigned char xmt_upper_limit_reg;
|
|
short xmt_lower_limit;
|
|
short xmt_upper_limit;
|
|
short rcv_lower_limit;
|
|
short rcv_upper_limit;
|
|
unsigned char eeprom_reg;
|
|
unsigned short word[8];
|
|
};
|
|
|
|
/* The station (ethernet) address prefix, used for IDing the board. */
|
|
#define SA_ADDR0 0x00 /* Etherexpress Pro/10 */
|
|
#define SA_ADDR1 0xaa
|
|
#define SA_ADDR2 0x00
|
|
|
|
#define GetBit(x,y) ((x & (1<<y))>>y)
|
|
|
|
/* EEPROM Word 0: */
|
|
#define ee_PnP 0 /* Plug 'n Play enable bit */
|
|
#define ee_Word1 1 /* Word 1? */
|
|
#define ee_BusWidth 2 /* 8/16 bit */
|
|
#define ee_FlashAddr 3 /* Flash Address */
|
|
#define ee_FlashMask 0x7 /* Mask */
|
|
#define ee_AutoIO 6 /* */
|
|
#define ee_reserved0 7 /* =0! */
|
|
#define ee_Flash 8 /* Flash there? */
|
|
#define ee_AutoNeg 9 /* Auto Negotiation enabled? */
|
|
#define ee_IO0 10 /* IO Address LSB */
|
|
#define ee_IO0Mask 0x /*...*/
|
|
#define ee_IO1 15 /* IO MSB */
|
|
|
|
/* EEPROM Word 1: */
|
|
#define ee_IntSel 0 /* Interrupt */
|
|
#define ee_IntMask 0x7
|
|
#define ee_LI 3 /* Link Integrity 0= enabled */
|
|
#define ee_PC 4 /* Polarity Correction 0= enabled */
|
|
#define ee_TPE_AUI 5 /* PortSelection 1=TPE */
|
|
#define ee_Jabber 6 /* Jabber prevention 0= enabled */
|
|
#define ee_AutoPort 7 /* Auto Port Selection 1= Disabled */
|
|
#define ee_SMOUT 8 /* SMout Pin Control 0= Input */
|
|
#define ee_PROM 9 /* Flash EPROM / PROM 0=Flash */
|
|
#define ee_reserved1 10 /* .. 12 =0! */
|
|
#define ee_AltReady 13 /* Alternate Ready, 0=normal */
|
|
#define ee_reserved2 14 /* =0! */
|
|
#define ee_Duplex 15
|
|
|
|
/* Word2,3,4: */
|
|
#define ee_IA5 0 /*bit start for individual Addr Byte 5 */
|
|
#define ee_IA4 8 /*bit start for individual Addr Byte 5 */
|
|
#define ee_IA3 0 /*bit start for individual Addr Byte 5 */
|
|
#define ee_IA2 8 /*bit start for individual Addr Byte 5 */
|
|
#define ee_IA1 0 /*bit start for individual Addr Byte 5 */
|
|
#define ee_IA0 8 /*bit start for individual Addr Byte 5 */
|
|
|
|
/* Word 5: */
|
|
#define ee_BNC_TPE 0 /* 0=TPE */
|
|
#define ee_BootType 1 /* 00=None, 01=IPX, 10=ODI, 11=NDIS */
|
|
#define ee_BootTypeMask 0x3
|
|
#define ee_NumConn 3 /* Number of Connections 0= One or Two */
|
|
#define ee_FlashSock 4 /* Presence of Flash Socket 0= Present */
|
|
#define ee_PortTPE 5
|
|
#define ee_PortBNC 6
|
|
#define ee_PortAUI 7
|
|
#define ee_PowerMgt 10 /* 0= disabled */
|
|
#define ee_CP 13 /* Concurrent Processing */
|
|
#define ee_CPMask 0x7
|
|
|
|
/* Word 6: */
|
|
#define ee_Stepping 0 /* Stepping info */
|
|
#define ee_StepMask 0x0F
|
|
#define ee_BoardID 4 /* Manucaturer Board ID, reserved */
|
|
#define ee_BoardMask 0x0FFF
|
|
|
|
/* Word 7: */
|
|
#define ee_INT_TO_IRQ 0 /* int to IRQ Mapping = 0x1EB8 for Pro/10+ */
|
|
#define ee_FX_INT2IRQ 0x1EB8 /* the _only_ mapping allowed for FX chips */
|
|
|
|
/*..*/
|
|
#define ee_SIZE 0x40 /* total EEprom Size */
|
|
#define ee_Checksum 0xBABA /* initial and final value for adding checksum */
|
|
|
|
|
|
/* Card identification via EEprom: */
|
|
#define ee_addr_vendor 0x10 /* Word offset for EISA Vendor ID */
|
|
#define ee_addr_id 0x11 /* Word offset for Card ID */
|
|
#define ee_addr_SN 0x12 /* Serial Number */
|
|
#define ee_addr_CRC_8 0x14 /* CRC over last thee Bytes */
|
|
|
|
|
|
#define ee_vendor_intel0 0x25 /* Vendor ID Intel */
|
|
#define ee_vendor_intel1 0xD4
|
|
#define ee_id_eepro10p0 0x10 /* ID for eepro/10+ */
|
|
#define ee_id_eepro10p1 0x31
|
|
|
|
#define TX_TIMEOUT 40
|
|
|
|
/* Index to functions, as function prototypes. */
|
|
|
|
static int eepro_probe1(struct net_device *dev, int autoprobe);
|
|
static int eepro_open(struct net_device *dev);
|
|
static int eepro_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t eepro_interrupt(int irq, void *dev_id);
|
|
static void eepro_rx(struct net_device *dev);
|
|
static void eepro_transmit_interrupt(struct net_device *dev);
|
|
static int eepro_close(struct net_device *dev);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
static void eepro_tx_timeout (struct net_device *dev);
|
|
|
|
static int read_eeprom(int ioaddr, int location, struct net_device *dev);
|
|
static int hardware_send_packet(struct net_device *dev, void *buf, short length);
|
|
static int eepro_grab_irq(struct net_device *dev);
|
|
|
|
/*
|
|
Details of the i82595.
|
|
|
|
You will need either the datasheet or the user manual to understand what
|
|
is going on here. The 82595 is very different from the 82586, 82593.
|
|
|
|
The receive algorithm in eepro_rx() is just an implementation of the
|
|
RCV ring structure that the Intel 82595 imposes at the hardware level.
|
|
The receive buffer is set at 24K, and the transmit buffer is 8K. I
|
|
am assuming that the total buffer memory is 32K, which is true for the
|
|
Intel EtherExpress Pro/10. If it is less than that on a generic card,
|
|
the driver will be broken.
|
|
|
|
The transmit algorithm in the hardware_send_packet() is similar to the
|
|
one in the eepro_rx(). The transmit buffer is a ring linked list.
|
|
I just queue the next available packet to the end of the list. In my
|
|
system, the 82595 is so fast that the list seems to always contain a
|
|
single packet. In other systems with faster computers and more congested
|
|
network traffics, the ring linked list should improve performance by
|
|
allowing up to 8K worth of packets to be queued.
|
|
|
|
The sizes of the receive and transmit buffers can now be changed via lilo
|
|
or insmod. Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0"
|
|
where rx-buffer is in KB unit. Modules uses the parameter mem which is
|
|
also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer."
|
|
The receive buffer has to be more than 3K or less than 29K. Otherwise,
|
|
it is reset to the default of 24K, and, hence, 8K for the trasnmit
|
|
buffer (transmit-buffer = 32K - receive-buffer).
|
|
|
|
*/
|
|
#define RAM_SIZE 0x8000
|
|
|
|
#define RCV_HEADER 8
|
|
#define RCV_DEFAULT_RAM 0x6000
|
|
|
|
#define XMT_HEADER 8
|
|
#define XMT_DEFAULT_RAM (RAM_SIZE - RCV_DEFAULT_RAM)
|
|
|
|
#define XMT_START_PRO RCV_DEFAULT_RAM
|
|
#define XMT_START_10 0x0000
|
|
#define RCV_START_PRO 0x0000
|
|
#define RCV_START_10 XMT_DEFAULT_RAM
|
|
|
|
#define RCV_DONE 0x0008
|
|
#define RX_OK 0x2000
|
|
#define RX_ERROR 0x0d81
|
|
|
|
#define TX_DONE_BIT 0x0080
|
|
#define TX_OK 0x2000
|
|
#define CHAIN_BIT 0x8000
|
|
#define XMT_STATUS 0x02
|
|
#define XMT_CHAIN 0x04
|
|
#define XMT_COUNT 0x06
|
|
|
|
#define BANK0_SELECT 0x00
|
|
#define BANK1_SELECT 0x40
|
|
#define BANK2_SELECT 0x80
|
|
|
|
/* Bank 0 registers */
|
|
#define COMMAND_REG 0x00 /* Register 0 */
|
|
#define MC_SETUP 0x03
|
|
#define XMT_CMD 0x04
|
|
#define DIAGNOSE_CMD 0x07
|
|
#define RCV_ENABLE_CMD 0x08
|
|
#define RCV_DISABLE_CMD 0x0a
|
|
#define STOP_RCV_CMD 0x0b
|
|
#define RESET_CMD 0x0e
|
|
#define POWER_DOWN_CMD 0x18
|
|
#define RESUME_XMT_CMD 0x1c
|
|
#define SEL_RESET_CMD 0x1e
|
|
#define STATUS_REG 0x01 /* Register 1 */
|
|
#define RX_INT 0x02
|
|
#define TX_INT 0x04
|
|
#define EXEC_STATUS 0x30
|
|
#define ID_REG 0x02 /* Register 2 */
|
|
#define R_ROBIN_BITS 0xc0 /* round robin counter */
|
|
#define ID_REG_MASK 0x2c
|
|
#define ID_REG_SIG 0x24
|
|
#define AUTO_ENABLE 0x10
|
|
#define INT_MASK_REG 0x03 /* Register 3 */
|
|
#define RX_STOP_MASK 0x01
|
|
#define RX_MASK 0x02
|
|
#define TX_MASK 0x04
|
|
#define EXEC_MASK 0x08
|
|
#define ALL_MASK 0x0f
|
|
#define IO_32_BIT 0x10
|
|
#define RCV_BAR 0x04 /* The following are word (16-bit) registers */
|
|
#define RCV_STOP 0x06
|
|
|
|
#define XMT_BAR_PRO 0x0a
|
|
#define XMT_BAR_10 0x0b
|
|
|
|
#define HOST_ADDRESS_REG 0x0c
|
|
#define IO_PORT 0x0e
|
|
#define IO_PORT_32_BIT 0x0c
|
|
|
|
/* Bank 1 registers */
|
|
#define REG1 0x01
|
|
#define WORD_WIDTH 0x02
|
|
#define INT_ENABLE 0x80
|
|
#define INT_NO_REG 0x02
|
|
#define RCV_LOWER_LIMIT_REG 0x08
|
|
#define RCV_UPPER_LIMIT_REG 0x09
|
|
|
|
#define XMT_LOWER_LIMIT_REG_PRO 0x0a
|
|
#define XMT_UPPER_LIMIT_REG_PRO 0x0b
|
|
#define XMT_LOWER_LIMIT_REG_10 0x0b
|
|
#define XMT_UPPER_LIMIT_REG_10 0x0a
|
|
|
|
/* Bank 2 registers */
|
|
#define XMT_Chain_Int 0x20 /* Interrupt at the end of the transmit chain */
|
|
#define XMT_Chain_ErrStop 0x40 /* Interrupt at the end of the chain even if there are errors */
|
|
#define RCV_Discard_BadFrame 0x80 /* Throw bad frames away, and continue to receive others */
|
|
#define REG2 0x02
|
|
#define PRMSC_Mode 0x01
|
|
#define Multi_IA 0x20
|
|
#define REG3 0x03
|
|
#define TPE_BIT 0x04
|
|
#define BNC_BIT 0x20
|
|
#define REG13 0x0d
|
|
#define FDX 0x00
|
|
#define A_N_ENABLE 0x02
|
|
|
|
#define I_ADD_REG0 0x04
|
|
#define I_ADD_REG1 0x05
|
|
#define I_ADD_REG2 0x06
|
|
#define I_ADD_REG3 0x07
|
|
#define I_ADD_REG4 0x08
|
|
#define I_ADD_REG5 0x09
|
|
|
|
#define EEPROM_REG_PRO 0x0a
|
|
#define EEPROM_REG_10 0x0b
|
|
|
|
#define EESK 0x01
|
|
#define EECS 0x02
|
|
#define EEDI 0x04
|
|
#define EEDO 0x08
|
|
|
|
/* do a full reset */
|
|
#define eepro_reset(ioaddr) outb(RESET_CMD, ioaddr)
|
|
|
|
/* do a nice reset */
|
|
#define eepro_sel_reset(ioaddr) { \
|
|
outb(SEL_RESET_CMD, ioaddr); \
|
|
SLOW_DOWN; \
|
|
SLOW_DOWN; \
|
|
}
|
|
|
|
/* disable all interrupts */
|
|
#define eepro_dis_int(ioaddr) outb(ALL_MASK, ioaddr + INT_MASK_REG)
|
|
|
|
/* clear all interrupts */
|
|
#define eepro_clear_int(ioaddr) outb(ALL_MASK, ioaddr + STATUS_REG)
|
|
|
|
/* enable tx/rx */
|
|
#define eepro_en_int(ioaddr) outb(ALL_MASK & ~(RX_MASK | TX_MASK), \
|
|
ioaddr + INT_MASK_REG)
|
|
|
|
/* enable exec event interrupt */
|
|
#define eepro_en_intexec(ioaddr) outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG)
|
|
|
|
/* enable rx */
|
|
#define eepro_en_rx(ioaddr) outb(RCV_ENABLE_CMD, ioaddr)
|
|
|
|
/* disable rx */
|
|
#define eepro_dis_rx(ioaddr) outb(RCV_DISABLE_CMD, ioaddr)
|
|
|
|
/* switch bank */
|
|
#define eepro_sw2bank0(ioaddr) outb(BANK0_SELECT, ioaddr)
|
|
#define eepro_sw2bank1(ioaddr) outb(BANK1_SELECT, ioaddr)
|
|
#define eepro_sw2bank2(ioaddr) outb(BANK2_SELECT, ioaddr)
|
|
|
|
/* enable interrupt line */
|
|
#define eepro_en_intline(ioaddr) outb(inb(ioaddr + REG1) | INT_ENABLE,\
|
|
ioaddr + REG1)
|
|
|
|
/* disable interrupt line */
|
|
#define eepro_dis_intline(ioaddr) outb(inb(ioaddr + REG1) & 0x7f, \
|
|
ioaddr + REG1);
|
|
|
|
/* set diagnose flag */
|
|
#define eepro_diag(ioaddr) outb(DIAGNOSE_CMD, ioaddr)
|
|
|
|
/* ack for rx int */
|
|
#define eepro_ack_rx(ioaddr) outb (RX_INT, ioaddr + STATUS_REG)
|
|
|
|
/* ack for tx int */
|
|
#define eepro_ack_tx(ioaddr) outb (TX_INT, ioaddr + STATUS_REG)
|
|
|
|
/* a complete sel reset */
|
|
#define eepro_complete_selreset(ioaddr) { \
|
|
dev->stats.tx_errors++;\
|
|
eepro_sel_reset(ioaddr);\
|
|
lp->tx_end = \
|
|
lp->xmt_lower_limit;\
|
|
lp->tx_start = lp->tx_end;\
|
|
lp->tx_last = 0;\
|
|
dev->trans_start = jiffies;\
|
|
netif_wake_queue(dev);\
|
|
eepro_en_rx(ioaddr);\
|
|
}
|
|
|
|
/* Check for a network adaptor of this type, and return '0' if one exists.
|
|
If dev->base_addr == 0, probe all likely locations.
|
|
If dev->base_addr == 1, always return failure.
|
|
If dev->base_addr == 2, allocate space for the device and return success
|
|
(detachable devices only).
|
|
*/
|
|
static int __init do_eepro_probe(struct net_device *dev)
|
|
{
|
|
int i;
|
|
int base_addr = dev->base_addr;
|
|
int irq = dev->irq;
|
|
|
|
#ifdef PnPWakeup
|
|
/* XXXX for multiple cards should this only be run once? */
|
|
|
|
/* Wakeup: */
|
|
#define WakeupPort 0x279
|
|
#define WakeupSeq {0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,\
|
|
0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,\
|
|
0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,\
|
|
0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43}
|
|
|
|
{
|
|
unsigned short int WS[32]=WakeupSeq;
|
|
|
|
if (request_region(WakeupPort, 2, "eepro wakeup")) {
|
|
if (net_debug>5)
|
|
printk(KERN_DEBUG "Waking UP\n");
|
|
|
|
outb_p(0,WakeupPort);
|
|
outb_p(0,WakeupPort);
|
|
for (i=0; i<32; i++) {
|
|
outb_p(WS[i],WakeupPort);
|
|
if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]);
|
|
}
|
|
|
|
release_region(WakeupPort, 2);
|
|
} else
|
|
printk(KERN_WARNING "PnP wakeup region busy!\n");
|
|
}
|
|
#endif
|
|
|
|
if (base_addr > 0x1ff) /* Check a single specified location. */
|
|
return eepro_probe1(dev, 0);
|
|
|
|
else if (base_addr != 0) /* Don't probe at all. */
|
|
return -ENXIO;
|
|
|
|
for (i = 0; eepro_portlist[i]; i++) {
|
|
dev->base_addr = eepro_portlist[i];
|
|
dev->irq = irq;
|
|
if (eepro_probe1(dev, 1) == 0)
|
|
return 0;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
#ifndef MODULE
|
|
struct net_device * __init eepro_probe(int unit)
|
|
{
|
|
struct net_device *dev = alloc_etherdev(sizeof(struct eepro_local));
|
|
int err;
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
|
|
err = do_eepro_probe(dev);
|
|
if (err)
|
|
goto out;
|
|
return dev;
|
|
out:
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
#endif
|
|
|
|
static void __init printEEPROMInfo(struct net_device *dev)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
unsigned short Word;
|
|
int i,j;
|
|
|
|
j = ee_Checksum;
|
|
for (i = 0; i < 8; i++)
|
|
j += lp->word[i];
|
|
for ( ; i < ee_SIZE; i++)
|
|
j += read_eeprom(ioaddr, i, dev);
|
|
|
|
printk(KERN_DEBUG "Checksum: %#x\n",j&0xffff);
|
|
|
|
Word = lp->word[0];
|
|
printk(KERN_DEBUG "Word0:\n");
|
|
printk(KERN_DEBUG " Plug 'n Pray: %d\n",GetBit(Word,ee_PnP));
|
|
printk(KERN_DEBUG " Buswidth: %d\n",(GetBit(Word,ee_BusWidth)+1)*8 );
|
|
printk(KERN_DEBUG " AutoNegotiation: %d\n",GetBit(Word,ee_AutoNeg));
|
|
printk(KERN_DEBUG " IO Address: %#x\n", (Word>>ee_IO0)<<4);
|
|
|
|
if (net_debug>4) {
|
|
Word = lp->word[1];
|
|
printk(KERN_DEBUG "Word1:\n");
|
|
printk(KERN_DEBUG " INT: %d\n", Word & ee_IntMask);
|
|
printk(KERN_DEBUG " LI: %d\n", GetBit(Word,ee_LI));
|
|
printk(KERN_DEBUG " PC: %d\n", GetBit(Word,ee_PC));
|
|
printk(KERN_DEBUG " TPE/AUI: %d\n", GetBit(Word,ee_TPE_AUI));
|
|
printk(KERN_DEBUG " Jabber: %d\n", GetBit(Word,ee_Jabber));
|
|
printk(KERN_DEBUG " AutoPort: %d\n", !GetBit(Word,ee_AutoPort));
|
|
printk(KERN_DEBUG " Duplex: %d\n", GetBit(Word,ee_Duplex));
|
|
}
|
|
|
|
Word = lp->word[5];
|
|
printk(KERN_DEBUG "Word5:\n");
|
|
printk(KERN_DEBUG " BNC: %d\n",GetBit(Word,ee_BNC_TPE));
|
|
printk(KERN_DEBUG " NumConnectors: %d\n",GetBit(Word,ee_NumConn));
|
|
printk(KERN_DEBUG " Has ");
|
|
if (GetBit(Word,ee_PortTPE)) printk(KERN_DEBUG "TPE ");
|
|
if (GetBit(Word,ee_PortBNC)) printk(KERN_DEBUG "BNC ");
|
|
if (GetBit(Word,ee_PortAUI)) printk(KERN_DEBUG "AUI ");
|
|
printk(KERN_DEBUG "port(s) \n");
|
|
|
|
Word = lp->word[6];
|
|
printk(KERN_DEBUG "Word6:\n");
|
|
printk(KERN_DEBUG " Stepping: %d\n",Word & ee_StepMask);
|
|
printk(KERN_DEBUG " BoardID: %d\n",Word>>ee_BoardID);
|
|
|
|
Word = lp->word[7];
|
|
printk(KERN_DEBUG "Word7:\n");
|
|
printk(KERN_DEBUG " INT to IRQ:\n");
|
|
|
|
for (i=0, j=0; i<15; i++)
|
|
if (GetBit(Word,i)) printk(KERN_DEBUG " INT%d -> IRQ %d;",j++,i);
|
|
|
|
printk(KERN_DEBUG "\n");
|
|
}
|
|
|
|
/* function to recalculate the limits of buffer based on rcv_ram */
|
|
static void eepro_recalc (struct net_device *dev)
|
|
{
|
|
struct eepro_local * lp;
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->xmt_ram = RAM_SIZE - lp->rcv_ram;
|
|
|
|
if (lp->eepro == LAN595FX_10ISA) {
|
|
lp->xmt_lower_limit = XMT_START_10;
|
|
lp->xmt_upper_limit = (lp->xmt_ram - 2);
|
|
lp->rcv_lower_limit = lp->xmt_ram;
|
|
lp->rcv_upper_limit = (RAM_SIZE - 2);
|
|
}
|
|
else {
|
|
lp->rcv_lower_limit = RCV_START_PRO;
|
|
lp->rcv_upper_limit = (lp->rcv_ram - 2);
|
|
lp->xmt_lower_limit = lp->rcv_ram;
|
|
lp->xmt_upper_limit = (RAM_SIZE - 2);
|
|
}
|
|
}
|
|
|
|
/* prints boot-time info */
|
|
static void __init eepro_print_info (struct net_device *dev)
|
|
{
|
|
struct eepro_local * lp = netdev_priv(dev);
|
|
int i;
|
|
const char * ifmap[] = {"AUI", "10Base2", "10BaseT"};
|
|
|
|
i = inb(dev->base_addr + ID_REG);
|
|
printk(KERN_DEBUG " id: %#x ",i);
|
|
printk(" io: %#x ", (unsigned)dev->base_addr);
|
|
|
|
switch (lp->eepro) {
|
|
case LAN595FX_10ISA:
|
|
printk("%s: Intel EtherExpress 10 ISA\n at %#x,",
|
|
dev->name, (unsigned)dev->base_addr);
|
|
break;
|
|
case LAN595FX:
|
|
printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
|
|
dev->name, (unsigned)dev->base_addr);
|
|
break;
|
|
case LAN595TX:
|
|
printk("%s: Intel EtherExpress Pro/10 ISA at %#x,",
|
|
dev->name, (unsigned)dev->base_addr);
|
|
break;
|
|
case LAN595:
|
|
printk("%s: Intel 82595-based lan card at %#x,",
|
|
dev->name, (unsigned)dev->base_addr);
|
|
break;
|
|
}
|
|
|
|
printk(" %pM", dev->dev_addr);
|
|
|
|
if (net_debug > 3)
|
|
printk(KERN_DEBUG ", %dK RCV buffer",
|
|
(int)(lp->rcv_ram)/1024);
|
|
|
|
if (dev->irq > 2)
|
|
printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]);
|
|
else
|
|
printk(", %s.\n", ifmap[dev->if_port]);
|
|
|
|
if (net_debug > 3) {
|
|
i = lp->word[5];
|
|
if (i & 0x2000) /* bit 13 of EEPROM word 5 */
|
|
printk(KERN_DEBUG "%s: Concurrent Processing is "
|
|
"enabled but not used!\n", dev->name);
|
|
}
|
|
|
|
/* Check the station address for the manufacturer's code */
|
|
if (net_debug>3)
|
|
printEEPROMInfo(dev);
|
|
}
|
|
|
|
static const struct ethtool_ops eepro_ethtool_ops;
|
|
|
|
/* This is the real probe routine. Linux has a history of friendly device
|
|
probes on the ISA bus. A good device probe avoids doing writes, and
|
|
verifies that the correct device exists and functions. */
|
|
|
|
static int __init eepro_probe1(struct net_device *dev, int autoprobe)
|
|
{
|
|
unsigned short station_addr[3], id, counter;
|
|
int i;
|
|
struct eepro_local *lp;
|
|
int ioaddr = dev->base_addr;
|
|
int err;
|
|
|
|
/* Grab the region so we can find another board if autoIRQ fails. */
|
|
if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
|
|
if (!autoprobe)
|
|
printk(KERN_WARNING "EEPRO: io-port 0x%04x in use \n",
|
|
ioaddr);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Now, we are going to check for the signature of the
|
|
ID_REG (register 2 of bank 0) */
|
|
|
|
id = inb(ioaddr + ID_REG);
|
|
|
|
if ((id & ID_REG_MASK) != ID_REG_SIG)
|
|
goto exit;
|
|
|
|
/* We seem to have the 82595 signature, let's
|
|
play with its counter (last 2 bits of
|
|
register 2 of bank 0) to be sure. */
|
|
|
|
counter = id & R_ROBIN_BITS;
|
|
|
|
if ((inb(ioaddr + ID_REG) & R_ROBIN_BITS) != (counter + 0x40))
|
|
goto exit;
|
|
|
|
lp = netdev_priv(dev);
|
|
memset(lp, 0, sizeof(struct eepro_local));
|
|
lp->xmt_bar = XMT_BAR_PRO;
|
|
lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_PRO;
|
|
lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_PRO;
|
|
lp->eeprom_reg = EEPROM_REG_PRO;
|
|
spin_lock_init(&lp->lock);
|
|
|
|
/* Now, get the ethernet hardware address from
|
|
the EEPROM */
|
|
station_addr[0] = read_eeprom(ioaddr, 2, dev);
|
|
|
|
/* FIXME - find another way to know that we've found
|
|
* an Etherexpress 10
|
|
*/
|
|
if (station_addr[0] == 0x0000 || station_addr[0] == 0xffff) {
|
|
lp->eepro = LAN595FX_10ISA;
|
|
lp->eeprom_reg = EEPROM_REG_10;
|
|
lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_10;
|
|
lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_10;
|
|
lp->xmt_bar = XMT_BAR_10;
|
|
station_addr[0] = read_eeprom(ioaddr, 2, dev);
|
|
}
|
|
|
|
/* get all words at once. will be used here and for ethtool */
|
|
for (i = 0; i < 8; i++) {
|
|
lp->word[i] = read_eeprom(ioaddr, i, dev);
|
|
}
|
|
station_addr[1] = lp->word[3];
|
|
station_addr[2] = lp->word[4];
|
|
|
|
if (!lp->eepro) {
|
|
if (lp->word[7] == ee_FX_INT2IRQ)
|
|
lp->eepro = 2;
|
|
else if (station_addr[2] == SA_ADDR1)
|
|
lp->eepro = 1;
|
|
}
|
|
|
|
/* Fill in the 'dev' fields. */
|
|
for (i=0; i < 6; i++)
|
|
dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i];
|
|
|
|
/* RX buffer must be more than 3K and less than 29K */
|
|
if (dev->mem_end < 3072 || dev->mem_end > 29696)
|
|
lp->rcv_ram = RCV_DEFAULT_RAM;
|
|
|
|
/* calculate {xmt,rcv}_{lower,upper}_limit */
|
|
eepro_recalc(dev);
|
|
|
|
if (GetBit(lp->word[5], ee_BNC_TPE))
|
|
dev->if_port = BNC;
|
|
else
|
|
dev->if_port = TPE;
|
|
|
|
if (dev->irq < 2 && lp->eepro != 0) {
|
|
/* Mask off INT number */
|
|
int count = lp->word[1] & 7;
|
|
unsigned irqMask = lp->word[7];
|
|
|
|
while (count--)
|
|
irqMask &= irqMask - 1;
|
|
|
|
count = ffs(irqMask);
|
|
|
|
if (count)
|
|
dev->irq = count - 1;
|
|
|
|
if (dev->irq < 2) {
|
|
printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n");
|
|
goto exit;
|
|
} else if (dev->irq == 2) {
|
|
dev->irq = 9;
|
|
}
|
|
}
|
|
|
|
dev->open = eepro_open;
|
|
dev->stop = eepro_close;
|
|
dev->hard_start_xmit = eepro_send_packet;
|
|
dev->set_multicast_list = &set_multicast_list;
|
|
dev->tx_timeout = eepro_tx_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
dev->ethtool_ops = &eepro_ethtool_ops;
|
|
|
|
/* print boot time info */
|
|
eepro_print_info(dev);
|
|
|
|
/* reset 82595 */
|
|
eepro_reset(ioaddr);
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto err;
|
|
return 0;
|
|
exit:
|
|
err = -ENODEV;
|
|
err:
|
|
release_region(dev->base_addr, EEPRO_IO_EXTENT);
|
|
return err;
|
|
}
|
|
|
|
/* Open/initialize the board. This is called (in the current kernel)
|
|
sometime after booting when the 'ifconfig' program is run.
|
|
|
|
This routine should set everything up anew at each open, even
|
|
registers that "should" only need to be set once at boot, so that
|
|
there is non-reboot way to recover if something goes wrong.
|
|
*/
|
|
|
|
static char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
|
|
static char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};
|
|
static int eepro_grab_irq(struct net_device *dev)
|
|
{
|
|
int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 };
|
|
int *irqp = irqlist, temp_reg, ioaddr = dev->base_addr;
|
|
|
|
eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
|
|
|
|
/* Enable the interrupt line. */
|
|
eepro_en_intline(ioaddr);
|
|
|
|
/* be CAREFUL, BANK 0 now */
|
|
eepro_sw2bank0(ioaddr);
|
|
|
|
/* clear all interrupts */
|
|
eepro_clear_int(ioaddr);
|
|
|
|
/* Let EXEC event to interrupt */
|
|
eepro_en_intexec(ioaddr);
|
|
|
|
do {
|
|
eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
|
|
|
|
temp_reg = inb(ioaddr + INT_NO_REG);
|
|
outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG);
|
|
|
|
eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
|
|
|
|
if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) {
|
|
unsigned long irq_mask;
|
|
/* Twinkle the interrupt, and check if it's seen */
|
|
irq_mask = probe_irq_on();
|
|
|
|
eepro_diag(ioaddr); /* RESET the 82595 */
|
|
mdelay(20);
|
|
|
|
if (*irqp == probe_irq_off(irq_mask)) /* It's a good IRQ line */
|
|
break;
|
|
|
|
/* clear all interrupts */
|
|
eepro_clear_int(ioaddr);
|
|
}
|
|
} while (*++irqp);
|
|
|
|
eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
|
|
|
|
/* Disable the physical interrupt line. */
|
|
eepro_dis_intline(ioaddr);
|
|
|
|
eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
|
|
|
|
/* Mask all the interrupts. */
|
|
eepro_dis_int(ioaddr);
|
|
|
|
/* clear all interrupts */
|
|
eepro_clear_int(ioaddr);
|
|
|
|
return dev->irq;
|
|
}
|
|
|
|
static int eepro_open(struct net_device *dev)
|
|
{
|
|
unsigned short temp_reg, old8, old9;
|
|
int irqMask;
|
|
int i, ioaddr = dev->base_addr;
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
|
|
if (net_debug > 3)
|
|
printk(KERN_DEBUG "%s: entering eepro_open routine.\n", dev->name);
|
|
|
|
irqMask = lp->word[7];
|
|
|
|
if (lp->eepro == LAN595FX_10ISA) {
|
|
if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 3;\n");
|
|
}
|
|
else if (irqMask == ee_FX_INT2IRQ) /* INT to IRQ Mask */
|
|
{
|
|
lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */
|
|
if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 2;\n");
|
|
}
|
|
|
|
else if ((dev->dev_addr[0] == SA_ADDR0 &&
|
|
dev->dev_addr[1] == SA_ADDR1 &&
|
|
dev->dev_addr[2] == SA_ADDR2))
|
|
{
|
|
lp->eepro = 1;
|
|
if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 1;\n");
|
|
} /* Yes, an Intel EtherExpress Pro/10 */
|
|
|
|
else lp->eepro = 0; /* No, it is a generic 82585 lan card */
|
|
|
|
/* Get the interrupt vector for the 82595 */
|
|
if (dev->irq < 2 && eepro_grab_irq(dev) == 0) {
|
|
printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (request_irq(dev->irq , &eepro_interrupt, 0, dev->name, dev)) {
|
|
printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* Initialize the 82595. */
|
|
|
|
eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
|
|
temp_reg = inb(ioaddr + lp->eeprom_reg);
|
|
|
|
lp->stepping = temp_reg >> 5; /* Get the stepping number of the 595 */
|
|
|
|
if (net_debug > 3)
|
|
printk(KERN_DEBUG "The stepping of the 82595 is %d\n", lp->stepping);
|
|
|
|
if (temp_reg & 0x10) /* Check the TurnOff Enable bit */
|
|
outb(temp_reg & 0xef, ioaddr + lp->eeprom_reg);
|
|
for (i=0; i < 6; i++)
|
|
outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i);
|
|
|
|
temp_reg = inb(ioaddr + REG1); /* Setup Transmit Chaining */
|
|
outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */
|
|
| RCV_Discard_BadFrame, ioaddr + REG1);
|
|
|
|
temp_reg = inb(ioaddr + REG2); /* Match broadcast */
|
|
outb(temp_reg | 0x14, ioaddr + REG2);
|
|
|
|
temp_reg = inb(ioaddr + REG3);
|
|
outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */
|
|
|
|
/* Set the receiving mode */
|
|
eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
|
|
|
|
/* Set the interrupt vector */
|
|
temp_reg = inb(ioaddr + INT_NO_REG);
|
|
if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
|
|
outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG);
|
|
else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
|
|
|
|
|
|
temp_reg = inb(ioaddr + INT_NO_REG);
|
|
if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
|
|
outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG);
|
|
else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
|
|
|
|
if (net_debug > 3)
|
|
printk(KERN_DEBUG "eepro_open: content of INT Reg is %x\n", temp_reg);
|
|
|
|
|
|
/* Initialize the RCV and XMT upper and lower limits */
|
|
outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
|
|
outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
|
|
outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg);
|
|
outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg);
|
|
|
|
/* Enable the interrupt line. */
|
|
eepro_en_intline(ioaddr);
|
|
|
|
/* Switch back to Bank 0 */
|
|
eepro_sw2bank0(ioaddr);
|
|
|
|
/* Let RX and TX events to interrupt */
|
|
eepro_en_int(ioaddr);
|
|
|
|
/* clear all interrupts */
|
|
eepro_clear_int(ioaddr);
|
|
|
|
/* Initialize RCV */
|
|
outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
|
|
lp->rx_start = lp->rcv_lower_limit;
|
|
outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
|
|
|
|
/* Initialize XMT */
|
|
outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
|
|
lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
|
|
lp->tx_last = 0;
|
|
|
|
/* Check for the i82595TX and i82595FX */
|
|
old8 = inb(ioaddr + 8);
|
|
outb(~old8, ioaddr + 8);
|
|
|
|
if ((temp_reg = inb(ioaddr + 8)) == old8) {
|
|
if (net_debug > 3)
|
|
printk(KERN_DEBUG "i82595 detected!\n");
|
|
lp->version = LAN595;
|
|
}
|
|
else {
|
|
lp->version = LAN595TX;
|
|
outb(old8, ioaddr + 8);
|
|
old9 = inb(ioaddr + 9);
|
|
|
|
if (irqMask==ee_FX_INT2IRQ) {
|
|
if (net_debug > 3) {
|
|
printk(KERN_DEBUG "IrqMask: %#x\n",irqMask);
|
|
printk(KERN_DEBUG "i82595FX detected!\n");
|
|
}
|
|
lp->version = LAN595FX;
|
|
outb(old9, ioaddr + 9);
|
|
if (dev->if_port != TPE) { /* Hopefully, this will fix the
|
|
problem of using Pentiums and
|
|
pro/10 w/ BNC. */
|
|
eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
|
|
temp_reg = inb(ioaddr + REG13);
|
|
/* disable the full duplex mode since it is not
|
|
applicable with the 10Base2 cable. */
|
|
outb(temp_reg & ~(FDX | A_N_ENABLE), REG13);
|
|
eepro_sw2bank0(ioaddr); /* be CAREFUL, BANK 0 now */
|
|
}
|
|
}
|
|
else if (net_debug > 3) {
|
|
printk(KERN_DEBUG "temp_reg: %#x ~old9: %#x\n",temp_reg,((~old9)&0xff));
|
|
printk(KERN_DEBUG "i82595TX detected!\n");
|
|
}
|
|
}
|
|
|
|
eepro_sel_reset(ioaddr);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
if (net_debug > 3)
|
|
printk(KERN_DEBUG "%s: exiting eepro_open routine.\n", dev->name);
|
|
|
|
/* enabling rx */
|
|
eepro_en_rx(ioaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void eepro_tx_timeout (struct net_device *dev)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
|
|
/* if (net_debug > 1) */
|
|
printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name,
|
|
"network cable problem");
|
|
/* This is not a duplicate. One message for the console,
|
|
one for the log file */
|
|
printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name,
|
|
"network cable problem");
|
|
eepro_complete_selreset(ioaddr);
|
|
}
|
|
|
|
|
|
static int eepro_send_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
int ioaddr = dev->base_addr;
|
|
short length = skb->len;
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: entering eepro_send_packet routine.\n", dev->name);
|
|
|
|
if (length < ETH_ZLEN) {
|
|
if (skb_padto(skb, ETH_ZLEN))
|
|
return 0;
|
|
length = ETH_ZLEN;
|
|
}
|
|
netif_stop_queue (dev);
|
|
|
|
eepro_dis_int(ioaddr);
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
{
|
|
unsigned char *buf = skb->data;
|
|
|
|
if (hardware_send_packet(dev, buf, length))
|
|
/* we won't wake queue here because we're out of space */
|
|
dev->stats.tx_dropped++;
|
|
else {
|
|
dev->stats.tx_bytes+=skb->len;
|
|
dev->trans_start = jiffies;
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
}
|
|
|
|
dev_kfree_skb (skb);
|
|
|
|
/* You might need to clean up and record Tx statistics here. */
|
|
/* dev->stats.tx_aborted_errors++; */
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: exiting eepro_send_packet routine.\n", dev->name);
|
|
|
|
eepro_en_int(ioaddr);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* The typical workload of the driver:
|
|
Handle the network interface interrupts. */
|
|
|
|
static irqreturn_t
|
|
eepro_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct eepro_local *lp;
|
|
int ioaddr, status, boguscount = 20;
|
|
int handled = 0;
|
|
|
|
lp = netdev_priv(dev);
|
|
|
|
spin_lock(&lp->lock);
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: entering eepro_interrupt routine.\n", dev->name);
|
|
|
|
ioaddr = dev->base_addr;
|
|
|
|
while (((status = inb(ioaddr + STATUS_REG)) & (RX_INT|TX_INT)) && (boguscount--))
|
|
{
|
|
handled = 1;
|
|
if (status & RX_INT) {
|
|
if (net_debug > 4)
|
|
printk(KERN_DEBUG "%s: packet received interrupt.\n", dev->name);
|
|
|
|
eepro_dis_int(ioaddr);
|
|
|
|
/* Get the received packets */
|
|
eepro_ack_rx(ioaddr);
|
|
eepro_rx(dev);
|
|
|
|
eepro_en_int(ioaddr);
|
|
}
|
|
if (status & TX_INT) {
|
|
if (net_debug > 4)
|
|
printk(KERN_DEBUG "%s: packet transmit interrupt.\n", dev->name);
|
|
|
|
|
|
eepro_dis_int(ioaddr);
|
|
|
|
/* Process the status of transmitted packets */
|
|
eepro_ack_tx(ioaddr);
|
|
eepro_transmit_interrupt(dev);
|
|
|
|
eepro_en_int(ioaddr);
|
|
}
|
|
}
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: exiting eepro_interrupt routine.\n", dev->name);
|
|
|
|
spin_unlock(&lp->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static int eepro_close(struct net_device *dev)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
short temp_reg;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
|
|
|
|
/* Disable the physical interrupt line. */
|
|
temp_reg = inb(ioaddr + REG1);
|
|
outb(temp_reg & 0x7f, ioaddr + REG1);
|
|
|
|
eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
|
|
|
|
/* Flush the Tx and disable Rx. */
|
|
outb(STOP_RCV_CMD, ioaddr);
|
|
lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
|
|
lp->tx_last = 0;
|
|
|
|
/* Mask all the interrupts. */
|
|
eepro_dis_int(ioaddr);
|
|
|
|
/* clear all interrupts */
|
|
eepro_clear_int(ioaddr);
|
|
|
|
/* Reset the 82595 */
|
|
eepro_reset(ioaddr);
|
|
|
|
/* release the interrupt */
|
|
free_irq(dev->irq, dev);
|
|
|
|
/* Update the statistics here. What statistics? */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
*/
|
|
static void
|
|
set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
short ioaddr = dev->base_addr;
|
|
unsigned short mode;
|
|
struct dev_mc_list *dmi=dev->mc_list;
|
|
|
|
if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || dev->mc_count > 63)
|
|
{
|
|
eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
|
|
mode = inb(ioaddr + REG2);
|
|
outb(mode | PRMSC_Mode, ioaddr + REG2);
|
|
mode = inb(ioaddr + REG3);
|
|
outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
|
|
eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
|
|
}
|
|
|
|
else if (dev->mc_count==0 )
|
|
{
|
|
eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
|
|
mode = inb(ioaddr + REG2);
|
|
outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */
|
|
mode = inb(ioaddr + REG3);
|
|
outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
|
|
eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
|
|
}
|
|
|
|
else
|
|
{
|
|
unsigned short status, *eaddrs;
|
|
int i, boguscount = 0;
|
|
|
|
/* Disable RX and TX interrupts. Necessary to avoid
|
|
corruption of the HOST_ADDRESS_REG by interrupt
|
|
service routines. */
|
|
eepro_dis_int(ioaddr);
|
|
|
|
eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
|
|
mode = inb(ioaddr + REG2);
|
|
outb(mode | Multi_IA, ioaddr + REG2);
|
|
mode = inb(ioaddr + REG3);
|
|
outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
|
|
eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
|
|
outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG);
|
|
outw(MC_SETUP, ioaddr + IO_PORT);
|
|
outw(0, ioaddr + IO_PORT);
|
|
outw(0, ioaddr + IO_PORT);
|
|
outw(6*(dev->mc_count + 1), ioaddr + IO_PORT);
|
|
|
|
for (i = 0; i < dev->mc_count; i++)
|
|
{
|
|
eaddrs=(unsigned short *)dmi->dmi_addr;
|
|
dmi=dmi->next;
|
|
outw(*eaddrs++, ioaddr + IO_PORT);
|
|
outw(*eaddrs++, ioaddr + IO_PORT);
|
|
outw(*eaddrs++, ioaddr + IO_PORT);
|
|
}
|
|
|
|
eaddrs = (unsigned short *) dev->dev_addr;
|
|
outw(eaddrs[0], ioaddr + IO_PORT);
|
|
outw(eaddrs[1], ioaddr + IO_PORT);
|
|
outw(eaddrs[2], ioaddr + IO_PORT);
|
|
outw(lp->tx_end, ioaddr + lp->xmt_bar);
|
|
outb(MC_SETUP, ioaddr);
|
|
|
|
/* Update the transmit queue */
|
|
i = lp->tx_end + XMT_HEADER + 6*(dev->mc_count + 1);
|
|
|
|
if (lp->tx_start != lp->tx_end)
|
|
{
|
|
/* update the next address and the chain bit in the
|
|
last packet */
|
|
outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
|
|
outw(i, ioaddr + IO_PORT);
|
|
outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
|
|
status = inw(ioaddr + IO_PORT);
|
|
outw(status | CHAIN_BIT, ioaddr + IO_PORT);
|
|
lp->tx_end = i ;
|
|
}
|
|
else {
|
|
lp->tx_start = lp->tx_end = i ;
|
|
}
|
|
|
|
/* Acknowledge that the MC setup is done */
|
|
do { /* We should be doing this in the eepro_interrupt()! */
|
|
SLOW_DOWN;
|
|
SLOW_DOWN;
|
|
if (inb(ioaddr + STATUS_REG) & 0x08)
|
|
{
|
|
i = inb(ioaddr);
|
|
outb(0x08, ioaddr + STATUS_REG);
|
|
|
|
if (i & 0x20) { /* command ABORTed */
|
|
printk(KERN_NOTICE "%s: multicast setup failed.\n",
|
|
dev->name);
|
|
break;
|
|
} else if ((i & 0x0f) == 0x03) { /* MC-Done */
|
|
printk(KERN_DEBUG "%s: set Rx mode to %d address%s.\n",
|
|
dev->name, dev->mc_count,
|
|
dev->mc_count > 1 ? "es":"");
|
|
break;
|
|
}
|
|
}
|
|
} while (++boguscount < 100);
|
|
|
|
/* Re-enable RX and TX interrupts */
|
|
eepro_en_int(ioaddr);
|
|
}
|
|
if (lp->eepro == LAN595FX_10ISA) {
|
|
eepro_complete_selreset(ioaddr);
|
|
}
|
|
else
|
|
eepro_en_rx(ioaddr);
|
|
}
|
|
|
|
/* The horrible routine to read a word from the serial EEPROM. */
|
|
/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */
|
|
|
|
/* The delay between EEPROM clock transitions. */
|
|
#define eeprom_delay() { udelay(40); }
|
|
#define EE_READ_CMD (6 << 6)
|
|
|
|
int
|
|
read_eeprom(int ioaddr, int location, struct net_device *dev)
|
|
{
|
|
int i;
|
|
unsigned short retval = 0;
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
short ee_addr = ioaddr + lp->eeprom_reg;
|
|
int read_cmd = location | EE_READ_CMD;
|
|
short ctrl_val = EECS ;
|
|
|
|
/* XXXX - black magic */
|
|
eepro_sw2bank1(ioaddr);
|
|
outb(0x00, ioaddr + STATUS_REG);
|
|
/* XXXX - black magic */
|
|
|
|
eepro_sw2bank2(ioaddr);
|
|
outb(ctrl_val, ee_addr);
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 8; i >= 0; i--) {
|
|
short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI
|
|
: ctrl_val;
|
|
outb(outval, ee_addr);
|
|
outb(outval | EESK, ee_addr); /* EEPROM clock tick. */
|
|
eeprom_delay();
|
|
outb(outval, ee_addr); /* Finish EEPROM a clock tick. */
|
|
eeprom_delay();
|
|
}
|
|
outb(ctrl_val, ee_addr);
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
outb(ctrl_val | EESK, ee_addr); eeprom_delay();
|
|
retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0);
|
|
outb(ctrl_val, ee_addr); eeprom_delay();
|
|
}
|
|
|
|
/* Terminate the EEPROM access. */
|
|
ctrl_val &= ~EECS;
|
|
outb(ctrl_val | EESK, ee_addr);
|
|
eeprom_delay();
|
|
outb(ctrl_val, ee_addr);
|
|
eeprom_delay();
|
|
eepro_sw2bank0(ioaddr);
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
hardware_send_packet(struct net_device *dev, void *buf, short length)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
short ioaddr = dev->base_addr;
|
|
unsigned status, tx_available, last, end;
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: entering hardware_send_packet routine.\n", dev->name);
|
|
|
|
/* determine how much of the transmit buffer space is available */
|
|
if (lp->tx_end > lp->tx_start)
|
|
tx_available = lp->xmt_ram - (lp->tx_end - lp->tx_start);
|
|
else if (lp->tx_end < lp->tx_start)
|
|
tx_available = lp->tx_start - lp->tx_end;
|
|
else tx_available = lp->xmt_ram;
|
|
|
|
if (((((length + 3) >> 1) << 1) + 2*XMT_HEADER) >= tx_available) {
|
|
/* No space available ??? */
|
|
return 1;
|
|
}
|
|
|
|
last = lp->tx_end;
|
|
end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
|
|
|
|
if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */
|
|
if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
|
|
/* Arrrr!!!, must keep the xmt header together,
|
|
several days were lost to chase this one down. */
|
|
last = lp->xmt_lower_limit;
|
|
end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
|
|
}
|
|
else end = lp->xmt_lower_limit + (end -
|
|
lp->xmt_upper_limit + 2);
|
|
}
|
|
|
|
outw(last, ioaddr + HOST_ADDRESS_REG);
|
|
outw(XMT_CMD, ioaddr + IO_PORT);
|
|
outw(0, ioaddr + IO_PORT);
|
|
outw(end, ioaddr + IO_PORT);
|
|
outw(length, ioaddr + IO_PORT);
|
|
|
|
if (lp->version == LAN595)
|
|
outsw(ioaddr + IO_PORT, buf, (length + 3) >> 1);
|
|
else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
|
|
unsigned short temp = inb(ioaddr + INT_MASK_REG);
|
|
outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
|
|
outsl(ioaddr + IO_PORT_32_BIT, buf, (length + 3) >> 2);
|
|
outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
|
|
}
|
|
|
|
/* A dummy read to flush the DRAM write pipeline */
|
|
status = inw(ioaddr + IO_PORT);
|
|
|
|
if (lp->tx_start == lp->tx_end) {
|
|
outw(last, ioaddr + lp->xmt_bar);
|
|
outb(XMT_CMD, ioaddr);
|
|
lp->tx_start = last; /* I don't like to change tx_start here */
|
|
}
|
|
else {
|
|
/* update the next address and the chain bit in the
|
|
last packet */
|
|
|
|
if (lp->tx_end != last) {
|
|
outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
|
|
outw(last, ioaddr + IO_PORT);
|
|
}
|
|
|
|
outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
|
|
status = inw(ioaddr + IO_PORT);
|
|
outw(status | CHAIN_BIT, ioaddr + IO_PORT);
|
|
|
|
/* Continue the transmit command */
|
|
outb(RESUME_XMT_CMD, ioaddr);
|
|
}
|
|
|
|
lp->tx_last = last;
|
|
lp->tx_end = end;
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: exiting hardware_send_packet routine.\n", dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
eepro_rx(struct net_device *dev)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
short ioaddr = dev->base_addr;
|
|
short boguscount = 20;
|
|
short rcv_car = lp->rx_start;
|
|
unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size;
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: entering eepro_rx routine.\n", dev->name);
|
|
|
|
/* Set the read pointer to the start of the RCV */
|
|
outw(rcv_car, ioaddr + HOST_ADDRESS_REG);
|
|
|
|
rcv_event = inw(ioaddr + IO_PORT);
|
|
|
|
while (rcv_event == RCV_DONE) {
|
|
|
|
rcv_status = inw(ioaddr + IO_PORT);
|
|
rcv_next_frame = inw(ioaddr + IO_PORT);
|
|
rcv_size = inw(ioaddr + IO_PORT);
|
|
|
|
if ((rcv_status & (RX_OK | RX_ERROR)) == RX_OK) {
|
|
|
|
/* Malloc up new buffer. */
|
|
struct sk_buff *skb;
|
|
|
|
dev->stats.rx_bytes+=rcv_size;
|
|
rcv_size &= 0x3fff;
|
|
skb = dev_alloc_skb(rcv_size+5);
|
|
if (skb == NULL) {
|
|
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
|
|
dev->stats.rx_dropped++;
|
|
rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
|
|
lp->rx_start = rcv_next_frame;
|
|
outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
|
|
|
|
break;
|
|
}
|
|
skb_reserve(skb,2);
|
|
|
|
if (lp->version == LAN595)
|
|
insw(ioaddr+IO_PORT, skb_put(skb,rcv_size), (rcv_size + 3) >> 1);
|
|
else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
|
|
unsigned short temp = inb(ioaddr + INT_MASK_REG);
|
|
outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
|
|
insl(ioaddr+IO_PORT_32_BIT, skb_put(skb,rcv_size),
|
|
(rcv_size + 3) >> 2);
|
|
outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
|
|
}
|
|
|
|
skb->protocol = eth_type_trans(skb,dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_packets++;
|
|
}
|
|
|
|
else { /* Not sure will ever reach here,
|
|
I set the 595 to discard bad received frames */
|
|
dev->stats.rx_errors++;
|
|
|
|
if (rcv_status & 0x0100)
|
|
dev->stats.rx_over_errors++;
|
|
|
|
else if (rcv_status & 0x0400)
|
|
dev->stats.rx_frame_errors++;
|
|
|
|
else if (rcv_status & 0x0800)
|
|
dev->stats.rx_crc_errors++;
|
|
|
|
printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
|
|
dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
|
|
}
|
|
|
|
if (rcv_status & 0x1000)
|
|
dev->stats.rx_length_errors++;
|
|
|
|
rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
|
|
lp->rx_start = rcv_next_frame;
|
|
|
|
if (--boguscount == 0)
|
|
break;
|
|
|
|
outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
|
|
rcv_event = inw(ioaddr + IO_PORT);
|
|
|
|
}
|
|
if (rcv_car == 0)
|
|
rcv_car = lp->rcv_upper_limit | 0xff;
|
|
|
|
outw(rcv_car - 1, ioaddr + RCV_STOP);
|
|
|
|
if (net_debug > 5)
|
|
printk(KERN_DEBUG "%s: exiting eepro_rx routine.\n", dev->name);
|
|
}
|
|
|
|
static void
|
|
eepro_transmit_interrupt(struct net_device *dev)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
short ioaddr = dev->base_addr;
|
|
short boguscount = 25;
|
|
short xmt_status;
|
|
|
|
while ((lp->tx_start != lp->tx_end) && boguscount--) {
|
|
|
|
outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG);
|
|
xmt_status = inw(ioaddr+IO_PORT);
|
|
|
|
if (!(xmt_status & TX_DONE_BIT))
|
|
break;
|
|
|
|
xmt_status = inw(ioaddr+IO_PORT);
|
|
lp->tx_start = inw(ioaddr+IO_PORT);
|
|
|
|
netif_wake_queue (dev);
|
|
|
|
if (xmt_status & TX_OK)
|
|
dev->stats.tx_packets++;
|
|
else {
|
|
dev->stats.tx_errors++;
|
|
if (xmt_status & 0x0400) {
|
|
dev->stats.tx_carrier_errors++;
|
|
printk(KERN_DEBUG "%s: carrier error\n",
|
|
dev->name);
|
|
printk(KERN_DEBUG "%s: XMT status = %#x\n",
|
|
dev->name, xmt_status);
|
|
}
|
|
else {
|
|
printk(KERN_DEBUG "%s: XMT status = %#x\n",
|
|
dev->name, xmt_status);
|
|
printk(KERN_DEBUG "%s: XMT status = %#x\n",
|
|
dev->name, xmt_status);
|
|
}
|
|
}
|
|
if (xmt_status & 0x000f) {
|
|
dev->stats.collisions += (xmt_status & 0x000f);
|
|
}
|
|
|
|
if ((xmt_status & 0x0040) == 0x0) {
|
|
dev->stats.tx_heartbeat_errors++;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int eepro_ethtool_get_settings(struct net_device *dev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct eepro_local *lp = netdev_priv(dev);
|
|
|
|
cmd->supported = SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_Autoneg;
|
|
cmd->advertising = ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_Autoneg;
|
|
|
|
if (GetBit(lp->word[5], ee_PortTPE)) {
|
|
cmd->supported |= SUPPORTED_TP;
|
|
cmd->advertising |= ADVERTISED_TP;
|
|
}
|
|
if (GetBit(lp->word[5], ee_PortBNC)) {
|
|
cmd->supported |= SUPPORTED_BNC;
|
|
cmd->advertising |= ADVERTISED_BNC;
|
|
}
|
|
if (GetBit(lp->word[5], ee_PortAUI)) {
|
|
cmd->supported |= SUPPORTED_AUI;
|
|
cmd->advertising |= ADVERTISED_AUI;
|
|
}
|
|
|
|
cmd->speed = SPEED_10;
|
|
|
|
if (dev->if_port == TPE && lp->word[1] & ee_Duplex) {
|
|
cmd->duplex = DUPLEX_FULL;
|
|
}
|
|
else {
|
|
cmd->duplex = DUPLEX_HALF;
|
|
}
|
|
|
|
cmd->port = dev->if_port;
|
|
cmd->phy_address = dev->base_addr;
|
|
cmd->transceiver = XCVR_INTERNAL;
|
|
|
|
if (lp->word[0] & ee_AutoNeg) {
|
|
cmd->autoneg = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void eepro_ethtool_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
strcpy(drvinfo->driver, DRV_NAME);
|
|
strcpy(drvinfo->version, DRV_VERSION);
|
|
sprintf(drvinfo->bus_info, "ISA 0x%lx", dev->base_addr);
|
|
}
|
|
|
|
static const struct ethtool_ops eepro_ethtool_ops = {
|
|
.get_settings = eepro_ethtool_get_settings,
|
|
.get_drvinfo = eepro_ethtool_get_drvinfo,
|
|
};
|
|
|
|
#ifdef MODULE
|
|
|
|
#define MAX_EEPRO 8
|
|
static struct net_device *dev_eepro[MAX_EEPRO];
|
|
|
|
static int io[MAX_EEPRO] = {
|
|
[0 ... MAX_EEPRO-1] = -1
|
|
};
|
|
static int irq[MAX_EEPRO];
|
|
static int mem[MAX_EEPRO] = { /* Size of the rx buffer in KB */
|
|
[0 ... MAX_EEPRO-1] = RCV_DEFAULT_RAM/1024
|
|
};
|
|
static int autodetect;
|
|
|
|
static int n_eepro;
|
|
/* For linux 2.1.xx */
|
|
|
|
MODULE_AUTHOR("Pascal Dupuis and others");
|
|
MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param_array(io, int, NULL, 0);
|
|
module_param_array(irq, int, NULL, 0);
|
|
module_param_array(mem, int, NULL, 0);
|
|
module_param(autodetect, int, 0);
|
|
MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
|
|
MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
|
|
MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
|
|
MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
|
|
|
|
int __init init_module(void)
|
|
{
|
|
struct net_device *dev;
|
|
int i;
|
|
if (io[0] == -1 && autodetect == 0) {
|
|
printk(KERN_WARNING "eepro_init_module: Probe is very dangerous in ISA boards!\n");
|
|
printk(KERN_WARNING "eepro_init_module: Please add \"autodetect=1\" to force probe\n");
|
|
return -ENODEV;
|
|
}
|
|
else if (autodetect) {
|
|
/* if autodetect is set then we must force detection */
|
|
for (i = 0; i < MAX_EEPRO; i++) {
|
|
io[i] = 0;
|
|
}
|
|
|
|
printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
|
|
}
|
|
|
|
for (i = 0; io[i] != -1 && i < MAX_EEPRO; i++) {
|
|
dev = alloc_etherdev(sizeof(struct eepro_local));
|
|
if (!dev)
|
|
break;
|
|
|
|
dev->mem_end = mem[i];
|
|
dev->base_addr = io[i];
|
|
dev->irq = irq[i];
|
|
|
|
if (do_eepro_probe(dev) == 0) {
|
|
dev_eepro[n_eepro++] = dev;
|
|
continue;
|
|
}
|
|
free_netdev(dev);
|
|
break;
|
|
}
|
|
|
|
if (n_eepro)
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
return n_eepro ? 0 : -ENODEV;
|
|
}
|
|
|
|
void __exit
|
|
cleanup_module(void)
|
|
{
|
|
int i;
|
|
|
|
for (i=0; i<n_eepro; i++) {
|
|
struct net_device *dev = dev_eepro[i];
|
|
unregister_netdev(dev);
|
|
release_region(dev->base_addr, EEPRO_IO_EXTENT);
|
|
free_netdev(dev);
|
|
}
|
|
}
|
|
#endif /* MODULE */
|