linux-stable/samples/bpf/Makefile
Jesper Dangaard Brouer 3ffab54602 samples/bpf: xdp_monitor tool based on tracepoints
This tool xdp_monitor demonstrate how to use the different xdp_redirect
tracepoints xdp_redirect{,_map}{,_err} from a BPF program.

The default mode is to only monitor the error counters, to avoid
affecting the per packet performance. Tracepoints comes with a base
overhead of 25 nanosec for an attached bpf_prog, and 48 nanosec for
using a full perf record (with non-matching filter).  Thus, default
loading the --stats mode could affect the maximum performance.

This version of the tool is very simple and count all types of errors
as one.  It will be natural to extend this later with the different
types of errors that can occur, which should help users quickly
identify common mistakes.

Because the TP_STRUCT was kept in sync all the tracepoints loads the
same BPF code.  It would also be natural to extend the map version to
demonstrate how the map information could be used.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29 10:51:29 -07:00

232 lines
8 KiB
Makefile

# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := test_lru_dist
hostprogs-y += sock_example
hostprogs-y += fds_example
hostprogs-y += sockex1
hostprogs-y += sockex2
hostprogs-y += sockex3
hostprogs-y += tracex1
hostprogs-y += tracex2
hostprogs-y += tracex3
hostprogs-y += tracex4
hostprogs-y += tracex5
hostprogs-y += tracex6
hostprogs-y += test_probe_write_user
hostprogs-y += trace_output
hostprogs-y += lathist
hostprogs-y += offwaketime
hostprogs-y += spintest
hostprogs-y += map_perf_test
hostprogs-y += test_overhead
hostprogs-y += test_cgrp2_array_pin
hostprogs-y += test_cgrp2_attach
hostprogs-y += test_cgrp2_attach2
hostprogs-y += test_cgrp2_sock
hostprogs-y += test_cgrp2_sock2
hostprogs-y += xdp1
hostprogs-y += xdp2
hostprogs-y += test_current_task_under_cgroup
hostprogs-y += trace_event
hostprogs-y += sampleip
hostprogs-y += tc_l2_redirect
hostprogs-y += lwt_len_hist
hostprogs-y += xdp_tx_iptunnel
hostprogs-y += test_map_in_map
hostprogs-y += per_socket_stats_example
hostprogs-y += load_sock_ops
hostprogs-y += xdp_redirect
hostprogs-y += xdp_redirect_map
hostprogs-y += xdp_monitor
hostprogs-y += syscall_tp
# Libbpf dependencies
LIBBPF := ../../tools/lib/bpf/bpf.o
test_lru_dist-objs := test_lru_dist.o $(LIBBPF)
sock_example-objs := sock_example.o $(LIBBPF)
fds_example-objs := bpf_load.o $(LIBBPF) fds_example.o
sockex1-objs := bpf_load.o $(LIBBPF) sockex1_user.o
sockex2-objs := bpf_load.o $(LIBBPF) sockex2_user.o
sockex3-objs := bpf_load.o $(LIBBPF) sockex3_user.o
tracex1-objs := bpf_load.o $(LIBBPF) tracex1_user.o
tracex2-objs := bpf_load.o $(LIBBPF) tracex2_user.o
tracex3-objs := bpf_load.o $(LIBBPF) tracex3_user.o
tracex4-objs := bpf_load.o $(LIBBPF) tracex4_user.o
tracex5-objs := bpf_load.o $(LIBBPF) tracex5_user.o
tracex6-objs := bpf_load.o $(LIBBPF) tracex6_user.o
load_sock_ops-objs := bpf_load.o $(LIBBPF) load_sock_ops.o
test_probe_write_user-objs := bpf_load.o $(LIBBPF) test_probe_write_user_user.o
trace_output-objs := bpf_load.o $(LIBBPF) trace_output_user.o
lathist-objs := bpf_load.o $(LIBBPF) lathist_user.o
offwaketime-objs := bpf_load.o $(LIBBPF) offwaketime_user.o
spintest-objs := bpf_load.o $(LIBBPF) spintest_user.o
map_perf_test-objs := bpf_load.o $(LIBBPF) map_perf_test_user.o
test_overhead-objs := bpf_load.o $(LIBBPF) test_overhead_user.o
test_cgrp2_array_pin-objs := $(LIBBPF) test_cgrp2_array_pin.o
test_cgrp2_attach-objs := $(LIBBPF) test_cgrp2_attach.o
test_cgrp2_attach2-objs := $(LIBBPF) test_cgrp2_attach2.o cgroup_helpers.o
test_cgrp2_sock-objs := $(LIBBPF) test_cgrp2_sock.o
test_cgrp2_sock2-objs := bpf_load.o $(LIBBPF) test_cgrp2_sock2.o
xdp1-objs := bpf_load.o $(LIBBPF) xdp1_user.o
# reuse xdp1 source intentionally
xdp2-objs := bpf_load.o $(LIBBPF) xdp1_user.o
test_current_task_under_cgroup-objs := bpf_load.o $(LIBBPF) cgroup_helpers.o \
test_current_task_under_cgroup_user.o
trace_event-objs := bpf_load.o $(LIBBPF) trace_event_user.o
sampleip-objs := bpf_load.o $(LIBBPF) sampleip_user.o
tc_l2_redirect-objs := bpf_load.o $(LIBBPF) tc_l2_redirect_user.o
lwt_len_hist-objs := bpf_load.o $(LIBBPF) lwt_len_hist_user.o
xdp_tx_iptunnel-objs := bpf_load.o $(LIBBPF) xdp_tx_iptunnel_user.o
test_map_in_map-objs := bpf_load.o $(LIBBPF) test_map_in_map_user.o
per_socket_stats_example-objs := $(LIBBPF) cookie_uid_helper_example.o
xdp_redirect-objs := bpf_load.o $(LIBBPF) xdp_redirect_user.o
xdp_redirect_map-objs := bpf_load.o $(LIBBPF) xdp_redirect_map_user.o
xdp_monitor-objs := bpf_load.o $(LIBBPF) xdp_monitor_user.o
syscall_tp-objs := bpf_load.o $(LIBBPF) syscall_tp_user.o
# Tell kbuild to always build the programs
always := $(hostprogs-y)
always += sockex1_kern.o
always += sockex2_kern.o
always += sockex3_kern.o
always += tracex1_kern.o
always += tracex2_kern.o
always += tracex3_kern.o
always += tracex4_kern.o
always += tracex5_kern.o
always += tracex6_kern.o
always += sock_flags_kern.o
always += test_probe_write_user_kern.o
always += trace_output_kern.o
always += tcbpf1_kern.o
always += tcbpf2_kern.o
always += tc_l2_redirect_kern.o
always += lathist_kern.o
always += offwaketime_kern.o
always += spintest_kern.o
always += map_perf_test_kern.o
always += test_overhead_tp_kern.o
always += test_overhead_kprobe_kern.o
always += parse_varlen.o parse_simple.o parse_ldabs.o
always += test_cgrp2_tc_kern.o
always += xdp1_kern.o
always += xdp2_kern.o
always += test_current_task_under_cgroup_kern.o
always += trace_event_kern.o
always += sampleip_kern.o
always += lwt_len_hist_kern.o
always += xdp_tx_iptunnel_kern.o
always += test_map_in_map_kern.o
always += cookie_uid_helper_example.o
always += tcp_synrto_kern.o
always += tcp_rwnd_kern.o
always += tcp_bufs_kern.o
always += tcp_cong_kern.o
always += tcp_iw_kern.o
always += tcp_clamp_kern.o
always += xdp_redirect_kern.o
always += xdp_redirect_map_kern.o
always += xdp_monitor_kern.o
always += syscall_tp_kern.o
HOSTCFLAGS += -I$(objtree)/usr/include
HOSTCFLAGS += -I$(srctree)/tools/lib/
HOSTCFLAGS += -I$(srctree)/tools/testing/selftests/bpf/
HOSTCFLAGS += -I$(srctree)/tools/lib/ -I$(srctree)/tools/include
HOSTCFLAGS += -I$(srctree)/tools/perf
HOSTCFLAGS_bpf_load.o += -I$(objtree)/usr/include -Wno-unused-variable
HOSTLOADLIBES_fds_example += -lelf
HOSTLOADLIBES_sockex1 += -lelf
HOSTLOADLIBES_sockex2 += -lelf
HOSTLOADLIBES_sockex3 += -lelf
HOSTLOADLIBES_tracex1 += -lelf
HOSTLOADLIBES_tracex2 += -lelf
HOSTLOADLIBES_tracex3 += -lelf
HOSTLOADLIBES_tracex4 += -lelf -lrt
HOSTLOADLIBES_tracex5 += -lelf
HOSTLOADLIBES_tracex6 += -lelf
HOSTLOADLIBES_test_cgrp2_sock2 += -lelf
HOSTLOADLIBES_load_sock_ops += -lelf
HOSTLOADLIBES_test_probe_write_user += -lelf
HOSTLOADLIBES_trace_output += -lelf -lrt
HOSTLOADLIBES_lathist += -lelf
HOSTLOADLIBES_offwaketime += -lelf
HOSTLOADLIBES_spintest += -lelf
HOSTLOADLIBES_map_perf_test += -lelf -lrt
HOSTLOADLIBES_test_overhead += -lelf -lrt
HOSTLOADLIBES_xdp1 += -lelf
HOSTLOADLIBES_xdp2 += -lelf
HOSTLOADLIBES_test_current_task_under_cgroup += -lelf
HOSTLOADLIBES_trace_event += -lelf
HOSTLOADLIBES_sampleip += -lelf
HOSTLOADLIBES_tc_l2_redirect += -l elf
HOSTLOADLIBES_lwt_len_hist += -l elf
HOSTLOADLIBES_xdp_tx_iptunnel += -lelf
HOSTLOADLIBES_test_map_in_map += -lelf
HOSTLOADLIBES_xdp_redirect += -lelf
HOSTLOADLIBES_xdp_redirect_map += -lelf
HOSTLOADLIBES_xdp_monitor += -lelf
HOSTLOADLIBES_syscall_tp += -lelf
# Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline:
# make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang
LLC ?= llc
CLANG ?= clang
# Trick to allow make to be run from this directory
all:
$(MAKE) -C ../../ $(CURDIR)/
clean:
$(MAKE) -C ../../ M=$(CURDIR) clean
@rm -f *~
$(obj)/syscall_nrs.s: $(src)/syscall_nrs.c
$(call if_changed_dep,cc_s_c)
$(obj)/syscall_nrs.h: $(obj)/syscall_nrs.s FORCE
$(call filechk,offsets,__SYSCALL_NRS_H__)
clean-files += syscall_nrs.h
FORCE:
# Verify LLVM compiler tools are available and bpf target is supported by llc
.PHONY: verify_cmds verify_target_bpf $(CLANG) $(LLC)
verify_cmds: $(CLANG) $(LLC)
@for TOOL in $^ ; do \
if ! (which -- "$${TOOL}" > /dev/null 2>&1); then \
echo "*** ERROR: Cannot find LLVM tool $${TOOL}" ;\
exit 1; \
else true; fi; \
done
verify_target_bpf: verify_cmds
@if ! (${LLC} -march=bpf -mattr=help > /dev/null 2>&1); then \
echo "*** ERROR: LLVM (${LLC}) does not support 'bpf' target" ;\
echo " NOTICE: LLVM version >= 3.7.1 required" ;\
exit 2; \
else true; fi
$(src)/*.c: verify_target_bpf
$(obj)/tracex5_kern.o: $(obj)/syscall_nrs.h
# asm/sysreg.h - inline assembly used by it is incompatible with llvm.
# But, there is no easy way to fix it, so just exclude it since it is
# useless for BPF samples.
$(obj)/%.o: $(src)/%.c
$(CLANG) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) -I$(obj) \
-I$(srctree)/tools/testing/selftests/bpf/ \
-D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
-Wno-unknown-warning-option \
-O2 -emit-llvm -c $< -o -| $(LLC) -march=bpf -filetype=obj -o $@